DLA MIL-DTL-3786 H-2006
(电路选择器,低电流容量)旋转开关的一般规范

SWITCHES, ROTARY (CIRCUIT SELECTOR, LOW-CURRENT CAPACITY), GENERAL SPECIFICATION FOR


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 DLA MIL-DTL-3786 H-2006 前三页,或者稍后再访问。

如果您需要购买此标准的全文,请联系:

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
DLA MIL-DTL-3786 H-2006
发布
2006年
发布单位
美国国防后勤局
 
 
适用范围
This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the general requirements for circuit selector, rotary switches, designed for low power, alternating current (ac) or direct current (dc) switching applications (capable of making and breaking a resistive load of 2 amperes or less, unless otherwise specified (see 3.1), which are primarily for use in electronic and communications equipment. Acquisition of switches of a design covered by a specification sheet will require additional data as specified in 6.2.2. Acquisition of switches of a design not covered by a specification sheet will require additional data, giving detailed electrical and mechanical requirements, tolerances, and applicable additions and exceptions to the general requirements and tests specified herein (see 6.2.3). Switches which differ because of electrical configuration, shape, or size of operating shaft, type of construction, number of switch sections (see 6.7.6), (see 3.2), bushing length, temperature life characteristics, angle of throw, vibration grade, shock type, insulation, or altitude are considered to be standard switches under a particular style (see 3.2), provided they meet the envelope size and dimensional, environmental, and electrical requirements of

DLA MIL-DTL-3786 H-2006相似标准


推荐

工业自动化仪表及控制装置设备你了解多少?

f.辅助单元仪表如气动(Q型)操作器、手动/自动切换操作器、高()值选择器、继动器、切换器、限幅器、配比器、负荷分配器、大流量过滤减压阀等。电动单元组合仪表:电动单元组合仪表以直流电源为其工作能源。此类仪表因其基本电子元件更新换代经历了Ⅰ型(电子管电路)、Ⅱ型(晶体管电路)和Ⅲ型(线性集成电路)三个发展阶段。目前,Ⅰ型、Ⅱ型已经淘汰不再使用。Ⅲ型仍广泛应用于炼油化工生产装置中。...

Electronics:打造二维可重构器件,“瘦身”数字和类脑电路

这类ETH器件具有的“可重构”电学特性,可用来设计全新可重构功能电路。图1 可调同质结器件。a,器件结构示意图;b,在栅极电压(VgA和VgB)和源漏电压(Vds)调控下器件开关电流状态表。...

关于新兴存储技术,这里有你不知道诸多知识

位可以处于高阻态或阻态,这里使用红色表示高电阻状态,绿色表示电阻状态,在这些状态下,要么电流停止流动,要么允许电流通过。如下图所示,我们现在假设没有选择器。如果一个位置于电阻状态,且其字线(蓝色)通电(激活),则电流从字线通过位线(绿色)流向绿色单元。没有其它位线接收电流,因为它们所有位单元都处于高阻态(红色)。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号