IEC 61162-3-2008
海上导航和无线电通信设备及系统.数字接口.第3部分:串联数据设备网络

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network


IEC 61162-3-2008 发布历史

This part of IEC 61162 is based upon the NMEA 2000 standard. The NMEA 2000 standard contains the requirements for the minimum implementation of a serial-data communications network to interconnect marine electronic equipment onboard vessels. Equipment designed to this standard will have the ability to share data, including commands and status, with other compatible equipment over a single signalling channel. Data messages are transmitted as a series of data frames, each with robust error check confirmed frame delivery and guaranteed latency times. As the actual data content of a data frame is at best 50 % of the transmitted bits, this standard is primarily intended to support relatively brief data messages, which may be periodic, transmitted as needed, or on-demand by use of query commands. Typical data includes discrete parameters such as position latitude and longitude, GPS status values, steering commands to autopilots, finite parameter lists such as waypoints, and moderately sized blocks of data such as electronic chart database updates. This standard is not necessarily intended to support high-bandwidth applications such as radar, electronic chart or other video data, or other intensive database or file transfer applications. This standard defines all of the pertinent layers of the International Standards Organisation Open Systems Interconnect (ISO/OSI) model, from the application layer to the physical layer, necessary to implement the required IEC 61162-3 network functionality. This standard defines data formats, network protocol, and the minimum physical layer necessary for devices to interface. SOLAS applications shall employ redundant designs (for instance dual networks, redundant network interface circuits) to reduce the impact of single point failures. The NMEA 2000 standard provides the fundamental tools and methods to support redundant equipment, buses and messaging. Specific shipboard installation designs are beyond the scope of this standard, however some guidance is given in Annex A.

IEC 61162-3-2008由国际电工委员会 IX-IEC 发布于 2008-05。

IEC 61162-3-2008 在中国标准分类中归属于: U60 船舶电气、观通、导航设备综合,在国际标准分类中归属于: 47.020.70 导航和控制设备。

IEC 61162-3-2008 发布之时,引用了标准

  • IEC 60945 海上导航和无线电通信设备及系统.一般要求.测试方法和要求的测试结果
  • ISO 11783 农林拖拉机和机械——串行控制和通信数据网络第9部分:拖拉机ECU*2012-01-30 更新
  • ISO 11783-3 农业和林业拖拉机和机械 - 串行控制和通信数据网络 - 第3部分:数据链路层*2018-11-02 更新

* 在 IEC 61162-3-2008 发布之后有更新,请注意新发布标准的变化。

IEC 61162-3-2008的历代版本如下:

  • 2008年05月 IEC 61162-3-2008 海上导航和无线电通信设备及系统.数字接口.第3部分:串联数据设备网络
  • 2010年06月21日 IEC 61162-3-2008/AMD1-2010 修改件1.海上导航和无线电通信设备及系统.数字接口.第3部分:串行数据仪器网络
  • 2014年07月21日 IEC 61162-3-2008/AMD2-2014 修改件2.海上导航和无线电通信设备及系统.数字接口.第3部分:串行数据仪器网络

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 IEC 61162-3-2008 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
IEC 61162-3-2008
发布日期
2008年05月
实施日期
废止日期
中国标准分类号
U60
国际标准分类号
47.020.70
发布单位
IX-IEC
引用标准
IEC 60945 ISO 11783 ISO 11783-3 ISO 117835-2001 NMEA 2000 Main document NMEA 2000 Appendix A NMEA 2000 Appendix B NMEA 2000 Appendix C NMEA 2000 Appendix D IMO 1974
被代替标准
IEC 80/496/CDV-2007
适用范围
This part of IEC 61162 is based upon the NMEA 2000 standard. The NMEA 2000 standard contains the requirements for the minimum implementation of a serial-data communications network to interconnect marine electronic equipment onboard vessels. Equipment designed to this standard will have the ability to share data, including commands and status, with other compatible equipment over a single signalling channel. Data messages are transmitted as a series of data frames, each with robust error check confirmed frame delivery and guaranteed latency times. As the actual data content of a data frame is at best 50 % of the transmitted bits, this standard is primarily intended to support relatively brief data messages, which may be periodic, transmitted as needed, or on-demand by use of query commands. Typical data includes discrete parameters such as position latitude and longitude, GPS status values, steering commands to autopilots, finite parameter lists such as waypoints, and moderately sized blocks of data such as electronic chart database updates. This standard is not necessarily intended to support high-bandwidth applications such as radar, electronic chart or other video data, or other intensive database or file transfer applications. This standard defines all of the pertinent layers of the International Standards Organisation Open Systems Interconnect (ISO/OSI) model, from the application layer to the physical layer, necessary to implement the required IEC 61162-3 network functionality. This standard defines data formats, network protocol, and the minimum physical layer necessary for devices to interface. SOLAS applications shall employ redundant designs (for instance dual networks, redundant network interface circuits) to reduce the impact of single point failures. The NMEA 2000 standard provides the fundamental tools and methods to support redundant equipment, buses and messaging. Specific shipboard installation designs are beyond the scope of this standard, however some guidance is given in Annex A.

IEC 61162-3-2008系列标准

IEC 61162-1 CORR 1-2013 海上导航和无线电通信设备及系统. 数字接口. 第1部分: 单通话器和多方收听器; 勘误表1 IEC 61162-1 Corrigendum 1-2013 海上导航和无线电通信设备及系统. 数字接口. 第1部分: 单通话器和多方收听器; 勘误表1 IEC 61162-1-2016 海上导航和无线电通信设备及系统. 数字接口. 第1部分: 单通话器和多方收听器 IEC 61162-2-1998 海上导航和无线电通信设备及系统 数字接口 第2部分:单通话器和多受话器,高速传输 IEC 61162-3 AMD 1-2010 航海和无线电通信设备及系统.数字接口.第3部分:串行数据工具网络 IEC 61162-3 AMD 2-2014 海上导航和无线电通信设备及系统. 数字接口. 第3部分: 串行数据仪网络 IEC 61162-3 Edition 1.1-2010 海上导航和无线电通信设备及系统.数字接口.第3部分:串联数据设备网络 IEC 61162-3 Edition 1.2-2014 海上导航和无线电通信设备及系统. 数字接口. 第3部分: 串行数据仪网络 IEC 61162-400-2001 海上导航和无线电通信设备及系统 数字接口 第400部分:多通话器和多受话器 船舶系统互连 导言和一般原则 IEC 61162-401-2001 海上导航和无线电通信设备及系统 数字接口 第401部分:多通话器和多受话器 船舶系统互连 应用文件集 IEC 61162-402-2005 海上导航和无线电通信设备及系统.数字接口.第402部分:多通话器和多受话器.船舶系统互连.文献和试验要求 IEC 61162-410-2001 海上导航和无线电通信设备及系统 数字接口 第410部分:多通话器和多受话器 船舶系统互连 运输文件集要求和基本运输文件集 IEC 61162-420-2001 海上导航和无线电通信设备及系统 数字接口 第420部分:多通话器和多受话器 船舶系统互连 围罩梯口标准要求和基本围罩梯口标准 IEC 61162-450-2018 IEC 61162-450-2018 IEC 61162-450-2011/AMD1-2016 修改件1.海上导航和无线电通信设备及系统.数字接口.第450部分:多对讲机和多侦听器.以太网互连 IEC 61162-460-2018/AMD1-2020 修改件1.海上导航和无线电通信设备及系统.数字接口.第460部分:多通话器和多侦听器.以太网互连.安全和保密 IEC 61162-460-2018/AMD1-2020 修改件1.海上导航和无线电通信设备及系统.数字接口.第460部分:多通话器和多侦听器.以太网互连.安全和保密

IEC 61162-3-2008 中可能用到的仪器设备


谁引用了IEC 61162-3-2008 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号