DIN EN ISO 11961-2009
石油和天然气工业.钢钻杆(ISO 11961-2008).英文版本EN ISO 11961-2008 + AC-2009

Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008); English version EN ISO 11961:2008 + AC:2009

DIN EN ISO 11961-2009 发布历史

This International Standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this International Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G. This International Standard covers the following grades of drill-pipe: -- grade E drill-pipe; -- high-strength grades of drill-pipe, grades X, G and S. A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C. 1 ). This International Standard can also be used for drill-pipe with tool joints not specified by ISO or API standards. By agreement between purchaser and manufacturer, this International Standard can also be applied to other drill-pipe body and/or tool-joint dimensions. This International Standard lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E). This International Standard does not consider performance properties. NOTE 1 In this International Standard, drill-pipe is designated by label 1, label 2, grade of material .(E, X, G and S), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering. NOTE 2 Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints. NOTE 3 Reference can be made to API RP 7G for the performance properties of the drill-pipe.

DIN EN ISO 11961-2009由德国标准化学会 DE-DIN 发布于 2009-09-01。

DIN EN ISO 11961-2009 在中国标准分类中归属于: E92 石油钻采设备与仪器，在国际标准分类中归属于: 75.180.10 勘探和钻采设备。

DIN EN ISO 11961-2009 发布之时，引用了标准

• ISO 6506-1 金属材料.布氏硬度试验.第1部分:试验方法*， 2014-10-01 更新
• ISO 6507-1 金属材料.维氏硬度试验.第1部分:试验方法
• ISO 6508-1 金属材料.洛氏硬度试验.第1部分:试验方法*， 2016-08-01 更新
• ISO 6892 金属材料 - 拉伸试验 - 第4部分:液氦试验方法*， 2015-09-29 更新
• ISO 7500-1 金属材料. 静态单轴向试验机的校准和验证. 第1部分: 拉伸/压缩试验机. 力测量系统的校准和验证
• ISO 9303 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用全周边超声波试验
• ISO 9304 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测缺陷用涡流电流试验
• ISO 9305 压力用途的无缝钢管 横向缺陷全周边超声电流检验
• ISO 9402 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用铁磁钢管全周边磁转换/磁链试验
• ISO 9513 金属材料.单轴向试验用引伸计的校准*， 2012-12-01 更新
• ISO 9598 压力用途的无缝钢管 检测横向缺陷用铁磁钢管全周边磁转换/磁链试验
• ISO 10424-2 石油和天然气工业.旋转钻探设备.第2部分:旋转钻探螺纹联轴器的线程和量规
• ISO/TR 9769 钢铁.可用分析方法的评述*， 2018-12-13 更新
• ISO/TR 10400 *， 2018-07-31 更新
• ISO 11484 钢产品.无损检测（NDT）人员的雇主资格体系*， 2019-04-01 更新
• ISO 13665 压力用途的承压无缝和焊接钢管 管身表面缺陷探测用磁粉检验
• API SPEC 7-2 *， 2017-01-01 更新
• API RP 7G 钻杆元件用检验和分类的推荐实施规程.第1版:合并勘误表1-2009年10月

* 在 DIN EN ISO 11961-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN ISO 11961-2009的历代版本如下：

• 2009年09月01日 DIN EN ISO 11961-2009 石油和天然气工业.钢钻杆(ISO 11961-2008).英文版本EN ISO 11961-2008 + AC-2009
• 2020年12月01日 DIN EN ISO 11961-2020 石油和天然气工业. 钢钻杆(ISO 11961-2018+Amd 1-2020); 英文版本EN ISO 11961-2018+A1-2020, 仅限CD-ROM

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN ISO 11961-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN ISO 11961-2009

发布日期

2009年09月01日

实施日期

废止日期

无

中国标准分类号

E92

国际标准分类号

75.180.10

发布单位

DE-DIN

引用标准

ISO 6506-1 ISO 6507-1 ISO 6508-1 ISO 6892 ISO 7500-1 ISO 9303 ISO 9304 ISO 9305 ISO 9402 ISO 9513 ISO 9598 ISO 10424-2 ISO/TR 9769 ISO/TR 10400 ISO 11484 ISO 13665 API SPEC 7-2 API RP 7G ANSI/API 5C3 ASME Boiler and Pressure Vessel Code, Section IX ASNT S

被代替标准

DIN EN ISO 11961-1997 DIN EN ISO 11961-2007

适用范围

This International Standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this International Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G. This International Standard covers the following grades of drill-pipe: -- grade E drill-pipe; -- high-strength grades of drill-pipe, grades X, G and S. A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C. 1 ). This International Standard can also be used for drill-pipe with tool joints not specified by ISO or API standards. By agreement between purchaser and manufacturer, this International Standard can also be applied to other drill-pipe body and/or tool-joint dimensions. This International Standard lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E). This International Standard does not consider performance properties. NOTE 1 In this International Standard, drill-pipe is designated by label 1, label 2, grade of material .(E, X, G and S), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering. NOTE 2 Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints. NOTE 3 Reference can be made to API RP 7G for the performance properties of the drill-pipe.

谁引用了DIN EN ISO 11961-2009 更多引用