BS 148-2009
变压器和开关装置用再生矿物绝缘油.规范

Reclaimed mineral insulating oil for transformers and switchgear – Specification

BS 148-2009 发布历史

This British Standard specifies requirements for reclaimed oxidation inhibited and uninhibited mineral insulating oils, as delivered, for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant or for heat transfer. Oils with and without additives are within the scope of this standard. This standard does not differentiate between the methods used to reclaim used mineral insulating oil; thus it is also applicable to oils having undergone a re‑refining process. This standard does not apply to mineral insulating oils used as impregnates in cables or capacitors, or to hydrocarbon insulating liquids obtained by synthesis.

BS 148-2009由英国标准学会 GB-BSI 发布于 2009-02-28，并于 2009-02-28 实施。

BS 148-2009 在中国标准分类中归属于: E38 绝缘油，在国际标准分类中归属于: 29.040.10 绝缘油。

BS 148-2009 发布之时，引用了标准

• BS 2000-15-1995 石油和石油产品试验方法.第15部分:产品倾点测定
• BS 5263-1975 液体介质取样方法
• BS 5984-1980 限定的绝缘油抗氧添加剂检查和测定方法
• BS EN 60156-1996 绝缘液.电源频率下击穿电压测定.试验验法
• BS EN 60247-2004 绝缘液体.相对电容率、电介质损耗因数(tan<δ>)和直流电阻率的测量
• BS EN 60814-1998 绝缘液体.油浸纸和纸板.用自动库仑卡尔费瑟滴定法对水含量的测定
• BS EN 61125-1993 新鲜烃基绝缘油.氧化稳定性评定的试验方法
• BS EN 61198-1994 绝缘矿物油.2-糖醛和有关化合物测定方法

BS 148-2009的历代版本如下：

• 1998年07月15日 BS 148-1998 变压器和开关设备未用过的和回收的矿物绝缘油规范
• 2009年02月28日 BS 148-2009 变压器和开关装置用再生矿物绝缘油.规范

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS 148-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS 148-2009

发布日期

2009年02月28日

实施日期

2009年02月28日

废止日期

无

中国标准分类号

E38

国际标准分类号

29.040.10

发布单位

GB-BSI

引用标准

BS 2000-15-1995 BS 5263-1975 BS 5984-1980 BS EN 60156-1996 BS EN 60247-2004 BS EN 60814-1998 BS EN 61125-1993 BS EN 61198-1994

被代替标准

BS 148-1998 08/30167496 DC-2008

适用范围

This British Standard specifies requirements for reclaimed oxidation inhibited and uninhibited mineral insulating oils, as delivered, for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant or for heat transfer. Oils with and without additives are within the scope of this standard. This standard does not differentiate between the methods used to reclaim used mineral insulating oil; thus it is also applicable to oils having undergone a re‑refining process. This standard does not apply to mineral insulating oils used as impregnates in cables or capacitors, or to hydrocarbon insulating liquids obtained by synthesis.