IEC 60269-1:2006/AMD1:2009
低压熔断器.一般要求.修改件1

Low-voltage fuses - General requirements; Amendment 1


IEC 60269-1:2006/AMD1:2009 发布历史

IEC 60269-1:2006/AMD1:2009由国际电工委员会 IX-IEC 发布于 2009-04,并于 2009-07-13 实施。

IEC 60269-1:2006/AMD1:2009 在中国标准分类中归属于: K31 低压配电电器,在国际标准分类中归属于: 29.120.50 熔断器和其他过载保护装置。

IEC 60269-1:2006/AMD1:2009的历代版本如下:

 

Scope and objectThis part of IEC 60269 is applicable to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA@ intended for protecting power-frequency a.c. circuits of nominal voltages not exceeding 1 000 V or d.c. circuits of nominal voltages not exceeding 1 500 V.Subsequent parts of this standard@ referred to herein@ cover supplementary requirements for such fuses intended for specific conditions of use or applications.Fuse-links intended to be included in fuse-switch combinations according to IEC 60947-3 should also comply with the following requirements.NOTE 1 For "a" fuse-links@ details of performance (see 2.2.4) on d.c. circuits should be subject to agreement between user and manufacturer.NOTE 2 Modifications of@ and supplements to@ this standard required for certain types of fuses for particular applications ?C for example@ certain fuses for rolling stock@ or fuses for high-frequency circuits ?C will be covered@ if necessary@ by separate standards.NOTE 3 This standard does not apply to miniature fuses@ these being covered by IEC 60127.The object of this standard is to establish the characteristics of fuses or parts of fuses (fuse-base@ fuse-carrier@ fuse-link) in such a way that they can be replaced by other fuses or parts of fuses having the same characteristics provided that they are interchangeable as far as their dimensions are concerned. For this purpose@ this standard refers in particular to?C the following characteristics of fuses:? their rated values;? their insulation;? their temperature rise in normal service;? their power dissipation and acceptable power dissipation;? their time/current characteristics;? their breaking capacity;? their cut-off current characteristics and their I 2t characteristics.?C type test for verification of the characteristics of fuses;?C the marking of fuses.

标准号
IEC 60269-1:2006/AMD1:2009
发布
2009年
发布单位
国际电工委员会
替代标准
IEC 60269-1:2014
当前最新
IEC 60269-1:2006/AMD2:2014
 
 
被代替标准
IEC 32B/534/FDIS:2009

IEC 60269-1:2006/AMD1:2009相似标准


推荐





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号