IEEE C 57.12.31-2010
柱上设备用IEEE标准.附件集成

IEEE Standard for Pole-Mounted Equipment.Enclosure Integrity

IEEE C 57.12.31-2010 发布历史

IMPORTANT NOTICE: This standard is not intended to ensure safety, security, health, or environmental protection. Implementers of the standard are responsible for determining appropriate safety, security, environmental, and health practices or regulatory requirements. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html. This standard covers conformance tests and requirements for the enclosure integrity of pole-mounted equipment containing apparatus energized in excess of 600 V, typically not accessible to the general public, such as but not limited to the following types of equipment: a) Pole-mounted distribution transformers b) Pole-mounted switches c) Pole-mounted regulators d) Pole-mounted metering equipment e) Pole-mounted reclosers/sectionalizers f) Pole-mounted capacitors

IEEE C 57.12.31-2010由美国电气电子工程师学会 US-IEEE 发布于 2010-06-17，并于 2010-06-17 实施。

IEEE C 57.12.31-2010 在中国标准分类中归属于: K47 输电线路器材，在国际标准分类中归属于: 29.020 电气工程综合。

IEEE C 57.12.31-2010 发布之时，引用了标准

• ASTM B117 操作盐雾（雾）装置的标准实施规程
• ASTM D523 镜面光泽度的标准测试方法
• ASTM D660 评定外部涂料检验等级的标准试验方法*， 2019-10-01 更新
• ASTM D661 评定外部涂料开裂程度的标准试验方法*， 2019-10-01 更新
• ASTM D714 评估油漆起泡程度的标准试验方法
• ASTM D1654-2005 腐蚀环境中涂漆或覆层试样评估的标准试验方法*， 2022-07-24 更新
• ASTM D2794 有机涂层抗快速变形（冲击）影响的标准试验方法*， 2019-01-01 更新
• ASTM D3170 涂层抗剪切性能的标准试验方法
• ASTM D3359 通过胶带测试测量粘合力的标准测试方法
• ASTM D3363 铅笔试验法测定薄膜硬度的标准试验方法*， 2022-06-01 更新
• ASTM D4060 用泰伯研磨机测定有机涂层耐磨性的标准试验方法
• ASTM D4585 使用受控冷凝水测试涂料的耐水性的标准实践
• ASTM D4587 涂料和相关涂层的荧光紫外冷凝曝光的标准实施规程
• SAE J400 SAE J400-2012

* 在 IEEE C 57.12.31-2010 发布之后有更新，请注意新发布标准的变化。

IEEE C 57.12.31-2010的历代版本如下：

• 2010年06月17日 IEEE C 57.12.31-2010 柱上设备用IEEE标准.附件集成

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEEE C 57.12.31-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEEE C 57.12.31-2010

发布日期

2010年06月17日

实施日期

2010年06月17日

废止日期

无

中国标准分类号

K47

国际标准分类号

25.220.01;29.020

发布单位

US-IEEE

引用标准

ASTM B117 ASTM D523 ASTM D660 ASTM D661 ASTM D714 ASTM D1654-2005 ASTM D2794 ASTM D3170 ASTM D3359 ASTM D3363 ASTM D4060 ASTM D4585 ASTM D4587 SAE J400

被代替标准

IEEE C 57.12.31-2002

适用范围

IMPORTANT NOTICE: This standard is not intended to ensure safety, security, health, or environmental protection. Implementers of the standard are responsible for determining appropriate safety, security, environmental, and health practices or regulatory requirements. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html. This standard covers conformance tests and requirements for the enclosure integrity of pole-mounted equipment containing apparatus energized in excess of 600 V, typically not accessible to the general public, such as but not limited to the following types of equipment: a) Pole-mounted distribution transformers b) Pole-mounted switches c) Pole-mounted regulators d) Pole-mounted metering equipment e) Pole-mounted reclosers/sectionalizers f) Pole-mounted capacitors

IEEE C 57.12.31-2010 中可能用到的仪器设备

谁引用了IEEE C 57.12.31-2010 更多引用