VDI 4202 Blatt 1-2010

Performance criteria for performance tests of automated ambient air measuring systems - Point-related measurement methods for gaseous and particulate air pollutants

VDI 4202 Blatt 1-2010 发布历史

This guideline specifies performance criteria on automated ambient air measuring systems. These performance criteria apply to performance tests of point-related single and multiple-component measuring systems, which are intended for measurement tasks specified in national and European regulations. The performance characteristics determined in laboratory and field tests are assessed by means of the performance criteria. For measuring systems with measuring principles according to DIN EN 14211, DIN EN 14212, DIN EN 14625, DIN EN 14626 and DIN EN 14662-3 as well as DIN EN 12341 and DIN EN 14907, the performance criteria specified in this guideline are identical to the European requirements. They are substantiated and amended, if necessary. This applies especially to measuring principles, which deviate from the reference methods described in European Standards. This guideline is addressed to manufactures of automated ambient air measuring systems, to test institutes performing performance tests of such measuring systems, and to the authorities responsible for the declaration of suitability. Furthermore, it assists users of performance-tested measuring systems in the method verification and in the assessment of the quality of measuring results obtained. The performance testing of point-related single and multiple-component measuring systems is specified in guideline VDI 4203 Part 3.

VDI 4202 Blatt 1-2010由德国机械工程师协会 DE-VDI 发布于 2010-09。

VDI 4202 Blatt 1-2010在国际标准分类中归属于: 13.040.20 环境空气。

VDI 4202 Blatt 1-2010 发布之时，引用了标准

• DIN 1319-1-1995 测量技术基础.第1部分:基本术语
• DIN EN 12341-1999 空气质量.悬浮颗粒物中PM10系数的测定.验证测量方法参照等值用的参照方法和现场试验程序
• DIN V ENV 13005-1999 测量时不确定性说明的指南
• DIN EN 14662-3-2005 环境空气质量.苯浓度测量的标准方法.第3部分:用现场气相色谱法的自动泵送取样
• DIN EN 14907-2005 环境空气质量.悬浮颗粒物质的PM2.5质量部分的测定用标准重量分析测量方法
• VDI 1000-2010 
• VDI 2449 Blatt 1-1995 
• VDI 2449 Blatt 2-1987 Grundlagen zur Kennzeichnung vollstaendiger Messverfahren; Begriffsbestimmungen
• VDI 4202 Blatt 2-2004 

VDI 4202 Blatt 1-2010的历代版本如下：

• 2000年12月01日 VDI 4202 Blatt 1-2000 Mindestanforderungen an kontinuierlich arbeitende Immissionsmesseinrichtungen bei der Eignungspruefung - Punktmessverfahren fuer gas- und partikelfoermige Luftverunreinigungen
• 2002年06月01日 VDI 4202 Blatt 1-2002 Mindestanforderungen an automatische Immissionsmesseinrichtungen bei der Eignungspruefung - Punktmessverfahren fuer gas- und partikelfoermige Luftverunreinigungen
• 2007年11月01日 VDI 4202 Blatt 1-2007 Minimum requirements for suitability tests of automated ambient air measuring systems - Measurement methods for gaseous and particulate pollutants
• 2010年09月 VDI 4202 Blatt 1-2010
• 2016年03月01日 VDI 4202 BLATT 1-2016 Performance testing of automated measuring systems for ambient air quality monitoring - Performance criteria and test procedures for point-related ambient air measuring systems for gaseous air pollutants
• 2018年04月01日 VDI 4202 BLATT 1-2018 Automated measuring systems for air quality monitoring - Performance test@ declaration of suitability@ and certification of point-related measuring systems for gaseous air pollutants

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 VDI 4202 Blatt 1-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

VDI 4202 Blatt 1-2010

发布日期

2010年09月

实施日期

废止日期

无

国际标准分类号

13.040.20

发布单位

DE-VDI

适用范围

This guideline specifies performance criteria on automated ambient air measuring systems. These performance criteria apply to performance tests of point-related single and multiple-component measuring systems, which are intended for measurement tasks specified in national and European regulations. The performance characteristics determined in laboratory and field tests are assessed by means of the performance criteria. For measuring systems with measuring principles according to DIN EN 14211, DIN EN 14212, DIN EN 14625, DIN EN 14626 and DIN EN 14662-3 as well as DIN EN 12341 and DIN EN 14907, the performance criteria specified in this guideline are identical to the European requirements. They are substantiated and amended, if necessary. This applies especially to measuring principles, which deviate from the reference methods described in European Standards. This guideline is addressed to manufactures of automated ambient air measuring systems, to test institutes performing performance tests of such measuring systems, and to the authorities responsible for the declaration of suitability. Furthermore, it assists users of performance-tested measuring systems in the method verification and in the assessment of the quality of measuring results obtained. The performance testing of point-related single and multiple-component measuring systems is specified in guideline VDI 4203 Part 3.