Resin mortars and grouts are differentiated as follows: resin mortars are troweled onto the brick or tile, in sufficient quantity to achieve a 1/8-in. (3-mm) thick joint after the brick or tile are laid in place (buttering or bricklayer''s method). Resin grouts are applied to the joints, generally 1/4 in. (6 mm) wide, after the brick or tile are set in place and the setting bed has hardened (grouting or tilesetter''s method). Refer to Specification C658. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use." >

ASTM C395-01(2012)
耐化学侵蚀的树脂灰浆标准规格

Standard Specification for Chemical-Resistant Resin Mortars


预览 ASTM C395-01(2012)前三页
标准号
ASTM C395-01(2012)
发布
2001年
发布单位
美国材料与试验协会
当前最新
ASTM C395-01(2012)
 
 
引用标准
ASTM C267 ASTM C279 ASTM C307 ASTM C308 ASTM C321 ASTM C399 ASTM C413 ASTM C531 ASTM C579 ASTM C658 ASTM C904
适用范围
1.1 本规范涵盖了用于粘结耐化学砖或瓦的耐化学树脂砂浆的要求。与无机砂浆相比，此类砂浆通常具有更好的物理性能，并且能耐受更广泛的化学物质。有关这些材料的使用，请参阅实践 C399。注 1?span class="note">树脂砂浆和灌浆的区别如下：将树脂砂浆抹到砖或瓷砖上，用量足以达到 1/8 英寸。砖或瓦铺设到位后（涂黄油或砌砖工的方法），形成（3 毫米）厚的接缝。在砖块或瓷砖固定到位并且固定床硬化后（灌浆或瓷砖铺贴方法），将树脂灌浆涂在接缝处，通常宽 1/4 英寸（6 毫米）。请参阅规范 C658。
1.2 以英寸-磅为单位的数值应被视为标准值。括号中给出的值是 SI 单位的数学转换，仅供参考，不被视为标准。
1.3 本标准并不旨在解决与其使用相关的所有安全问题（如果有）。本标准的使用者有责任在使用前建立适当的安全和健康实践并确定监管限制的适用性。


Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号