ASTM D7582-12
用宏观热重分析法对煤和焦炭作近似分析的标准试验方法

Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis


标准号
ASTM D7582-12
发布
2012年
发布单位
美国材料与试验协会
替代标准
ASTM D7582-15
当前最新
ASTM D7582-24
 
 
适用范围
5. Significance and UseTop Bottom

5.1 Moisture, as determined by this instrumental test method, is used for calculating other analytical results to a dry basis using procedures in Practice D3180.

5.2 Moisture can be used in conjunction with the air-dry moisture loss determined by Test Method D3302 to determine total moisture in coal. Total moisture is used for calculating other analytical results to an as-received basis using Practice D3180.

5.3 Ash yield is the residue remaining after heating the coal and coke samples (see Note 1).

Note 1???The ash obtained differs in composition and amount from the mineral constituents present in the original coal. Combustion causes an expulsion of all water, the loss of carbon dioxide from carbonates, the conversion of iron pyrite into iron oxides and sulfur oxides, and other chemical reactions. Ash yield, as determined by this test method, can differ from the amount of ash produced in furnace operations or other combustion systems because combustion conditions influence the chemistry and amount of ash.

5.4 Ash yield is used, (1) as a parameter for evaluating sampling procedures and coal cleaning processes, (2) in the ultimate analysis calculation of oxygen by difference using Practice D3176, (3) in calculations including material balance, reactivity and yields of products relevant to coal conversion processes such as gasification and liquefaction, (4) in calculations to estimate the loading on electrostatic precipitators and on the fly ash and bottom ash disposal systems as well as erosion rates on boiler systems.

5.5 Volatile matter yield, when determined as herein described, may be used to (1) indicate coke yield on carbonization, (2) provide the basis for purchasing and selling, or (3) establish combustion characteristics.

5.6 Fixed carbon is ...........


ASTM D7582-12相似标准


推荐

鹤壁天润全自动工业分析仪技术特点

3、自动化程度高:采用计算机实时通讯技术自适应控制技术,将电子天平集成到仪器内部,结合自动称量机构,采用分析法,自动称样、自动送样、自动处理数据、结果计算、报表打印存储等,实现无人值守。4、操作简便:试验过程中无需取放坩埚盖、送样取样,同时利用国外气缸自动控制水、灰部分上盖开关,避免高温辐射烫伤危险。...

关于高频红外碳硫分析仪测定焦炭及硫元素方法探讨

本文针对生产中用焦炭以及冶金材料分析中存在方法不便不足问题,探讨高频红外碳硫吸收法测定这类材料中方法,实现了快速分析,且结果可与经典国家标准化学分析法相比。   ...

分析TGA基本原理、分类应用

Standard Test Method for Thermal Stability by Thermogravimetry  ASTM E1641-2007 分析法分解动力学标准试验方法 Standard Test Method for Decomposition Kinetics by Thermogravimetry  ASTM E2043-1999(2006) 分析法测量农业辅助剂溶液中不挥发物质标准试验方法...

供暖季撞上霾天只是巧合?控制散污染很关键

因此,太原市一直在不断尝试各种办法,比如燃煤置换措施,而焦炭民用就成为其中一个方向。”太原市环保局局长陈继光说。  2015年8月,太原市环境监测中心站民用洁净焦炭城中村普遍使用民用煤燃烧排放情况进行了比对监测。在监测同时,还邀请了锅炉、工、煤质分析、环保等方面的专家,民用洁净焦炭燃烧情况进行评估。  ...


谁引用了ASTM D7582-12 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号