IEC 62128-3:2013
轨道交通.固定设施. 电气安全, 接地和回路. 第3部分: 交流和直流牵引系统的双向互动

Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems


标准号
IEC 62128-3:2013
发布
2013年
发布单位
国际电工委员会
当前最新
IEC 62128-3:2013
 
 
被代替标准
IEC 9/1805/FDIS:2013
适用范围
This part of IEC 62128 specifies requirements for the protective provisions relating to electrical safety in fixed installations@ when it is reasonably likely that hazardous voltages or currents will arise for people or equipment@ as a result of the mutual interaction of a.c. and d.c. electric traction systems. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. The mutual interaction can be of any of the following kinds: ?C parallel running of a.c. and d.c. electric traction systems; ?C crossing of a.c. and d.c. electric traction systems; ?C shared use of tracks@ buildings or other structures; ?C system separation sections between a.c. and d.c. electric traction systems. Scope is limited to basic frequency voltages and currents and their superposition. This standard does not cover radiated interferences. This standard applies to all new lines@ extensions and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as: 1) tramways@ 2) elevated and underground railways@ 3) mountain railways@ 4) trolleybus systems@ and 5) magnetically levitated systems@ which use a contact line system; c) material transportation systems. The standard does not apply to: d) mine traction systems in underground mines; e) cranes@ transportable platforms and similar transportation equipment on rails@ temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system for railways; f) suspended cable cars; g) funicular railways; h) procedures or rules for maintenance. The rules given in this standard can also be applied to mutual interaction with non-electrified tracks@ if hazardous voltages or currents can arise from a.c. or d.c. electric traction systems.

IEC 62128-3:2013相似标准


推荐

浅谈医用IT隔离电源系统在医疗场所应用及设计

通常情况下,医疗电气设备220V电源就近引自插座或配电箱预留回路,这些回路漏电断路器额定剩余电流一般为30mA,无法满足此情况下电击安全防护要求。2 IT 系统简介2.1 IT 系统定义   GB 14050—2008系统接地型式及安全技术要求对IT系统定义是:电源端带电部分接地或有一点通过阻抗接地电气装置外露可导电部分直接接地。IT系统系统图参见图1。...

地下空间支撑下城市轨道交通能源系统融合发展研究

城市轨道交通中压供电系统电能可经整流后流向地下储能系统,地下储能系统电能在逆变后可反向流向中压供电系统,由此实现能量在地下储能系统、城市轨道交通供电系统之间双向流动。光伏发电输出直流电经直流柜汇总后,再逆变接入低压动力照明系统,采用低压侧并网方式。飞轮储能装置输出交流电能,通过变流器整流后输出直流电能,挂接于直流牵引网以进行能量双向流动。...

新标 | 国标委发布203项国家标准

32580.301-2016  轨道交通 地面装置 交流开关设备特殊要求 3-1部分交流牵引系统专用测量、控制保护装置 应用指南 2016-11-01 106  GB/T 32580.302-2016  轨道交通 地面装置 交流开关设备特殊要求 3-2部分交流牵引系统专用测量、控制保护装置 单相电流互感器 2016-11-01 107  GB/T 32580.303-2016  轨道交通...

646项国家标准批准发布(附清单)

/7/1233GB/T 28026.2-2018轨道交通 地面装置 电气安全接地回流 2部分:直流牵引供电系统杂散电流防护措施GB/T 28026.2-20112019/7/1234GB/T 28026.3-2018轨道交通 地面装置 电气安全接地回流 3部分交流直流牵引供电系统相互作用2019/7/1235GB/T 28449-2018信息安全技术 网络安全等级保护测评过程指南...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号