This International Standard specifies methods for determining the fluidity of plastics melts subjected to shear stresses at rates and temperatures approximating to those arising in plastics processing. Testing plastics melts in accordance with these methods is necessary since the fluidity of plastics melts is generally not dependent solely on temperature, but also on other parameters, in particular shear rate and shear stress. The methods described in this International Standard are useful for determining melt viscosities from 10 Pa∙s to 107 Pa∙s, depending on the measurement range of the pressure and/or force transducer and the mechanical and physical characteristics of the rheometer. The shear rates occurring in extrusion rheometers range from 1 s−1 to 106 s−1. Elongational effects at the die entrance cause extrudate swelling at the die exit. Methods for assessing extrudate swelling have also been included. The rheological techniques described are not limited to the characterization of wall-adhering thermoplastics melts only; for example, thermoplastics exhibiting “slip” effects[1][2] and thermosetting plastics can be included. However, the methods used for determining the shear rate and shear viscosity are invalid for materials which are not wall-adhering. Nevertheless, this International Standard can be used to characterize the rheological behaviour of such fluids for a given geometry.
ISO 11443:2014由国际标准化组织 IX-ISO 发布于 2014-04。
ISO 11443:2014 在中国标准分类中归属于: G31 合成树脂、塑料基础标准与通用方法,在国际标准分类中归属于: 83.080.01 塑料综合。
毛细管流变仪配置灵活,测量范围宽,可以满足从聚合物熔体到医药工艺,从食品到油墨涂料等多种应用。 毛细管流变仪由精密螺杆挤出系统、毛细管模头或窄缝模头、称重单元组成。有不同口径和长径比的口模,螺杆挤出使聚合物以设定恒定的流速通过毛细管,通过测试特定的两个测压力点之间产生的压力降,在这种条件下,通过软件计算具有牛顿流变特性的聚合物熔体的剪切应力和剪切速率。 ...
在挤出的过程中,粉体流变仪可以测量出毛细管口模入口出的压力,在结合已知的速度参数、口模和料桶参数、以及流变学模型,从而计算出在不同剪切速率下熔体的剪切粘度。 流变性能的仪器一般称为粉体流变仪,有时又叫粘度计。在测定和研究塑料熔体流变性的各种仪器中,粉体流变仪是一种常用的较为合适的试验仪器,粉体流变仪具有多种功能和宽广范围的剪切速率容量。...
在挤出的过程中,粉体流变仪可以测量出毛细管口模入口出的压力,在结合已知的速度参数、口模和料桶参数、以及流变学模型,从而计算出在不同剪切速率下熔体的剪切粘度。 流变性能的仪器一般称为粉体流变仪,有时又叫粘度计。在测定和研究塑料熔体流变性的各种仪器中,粉体流变仪是一种常用的较为合适的试验仪器,粉体流变仪具有多种功能和宽广范围的剪切速率容量。...
在挤出的过程中,粉体流变仪可以测量出毛细管口模入口出的压力,在结合已知的速度参数、口模和料桶参数、以及流变学模型,从而计算出在不同剪切速率下熔体的剪切粘度。 流变性能的仪器一般称为粉体流变仪,有时又叫粘度计。在测定和研究塑料熔体流变性的各种仪器中,粉体流变仪是一种常用的较为合适的试验仪器,粉体流变仪具有多种功能和宽广范围的剪切速率容量。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号