ASTM D5160-95(2014)由美国材料与试验协会 US-ASTM 发布于 1995。
。
* 在 ASTM D5160-95(2014) 发布之后有更新,请注意新发布标准的变化。
5.1 Activated carbon is used extensively for removing gases and vapors from air or other gas streams. The physical and chemical characteristics of an activated carbon can strongly influence its suitability for a given application. The procedure in this guide allows the evaluation of the dynamic adsorption characteristics of an activated carbon for a particular adsorbate under conditions chosen by the user. It is necessary that the user choose test conditions that are meaningful for the application (see Section 9).
5.2 This guide can also be used to evaluate activated carbons that have been impregnated with materials to enhance their effectiveness at removing gases otherwise poorly adsorbed on activated carbon.
5.3 The procedure given in this guide is not generally applicable for evaluation of carbons used as catalysts for such purposes as decomposition of low levels of ozone or oxidation of SO2 to SO3.
5.4 The procedure given in this guide can be applied to reactivated or regenerated activated carbons.
5.5 Fig. 1 shows the adsorbate concentration profile in an activated carbon bed at breakthrough. The bed has a zone at the inlet in which the adsorbate concentration is equal to the influent concentration. In this region the carbon is at equilibrium with adsorbate. The adsorbate concentration in the remainder of the bed drops until at the outlet it is equal to the breakthrough concentration. The shorter the length of this mass transfer zone (adsorption zone), the more effectively the carbon in the bed is utilized. A bed whose depth is less than the length of this zone will show immediate appearance of adsorbate in the effluent (breakpoint).
FIG. 1 Concentration Profile of an Activated Carbon Bed at Breakthrough
5.6 From the standpoint of best carbon utilization it is desirable to choose a carbon which will give as short a mass transfer zone as possible under use conditions. However, in many applications, high adsorptive capacity is more important than a short mass transfer zone. In almost every application, bed pressure drop is also a primary consideration.
5.7 In a few situations such as respiratory protection against low levels of extremely toxic gases such as radioactive methyl iodide, a short mass transfer zone (that is, high adsorption rate coefficient) is more important than ultimate capacity. In other cases such as solvent recovery, a high dynamic capacity is more important.
5.8 Although the design of adsorber beds is beyond the scope of this guide, the following points should be considered. The bed diameter s......
-2008 ASTM D1319-14汽油中烃族组成的测定多维气相色谱法NB/SH/T 0741-201014.氧含量汽油中醇类和醚类含量的测定气相色谱法NB/SH/T 0663-2014 ASTM D4815-15a 15.甲醇含量汽油中醇类和醚类含量的测定气相色谱法NB/SH/T 0663-2014 ASTM D4815-15a 16.锰含量汽油中锰含量测定法(原子吸收光谱法)SH/T 0711...
固体吸附剂吸附—溶剂解析法1、HJ 584—2010 环境空气苯系物的测定活性炭吸附_二硫化碳解吸-气相色谱法2、HJ645-2013 环境空气挥发性卤代烃的测定活性炭吸附-二硫化碳解吸气相色谱法3、HJ638-2014 环境空气醛、酮类化合物测定高效液相色谱法固体吸附剂吸附—热脱附解析法1、HJ644-2013环境空气 挥发性有机物的测定 吸附管采样-热脱附/气相色谱-质谱法 2、HJ 583-...
固体吸附剂吸附—溶剂解析法1、HJ 584—2010 环境空气苯系物的测定活性炭吸附_二硫化碳解吸-气相色谱法2、HJ645-2013 环境空气挥发性卤代烃的测定活性炭吸附-二硫化碳解吸气相色谱法3、HJ638-2014 环境空气醛、酮类化合物测定高效液相色谱法固体吸附剂吸附—热脱附解析法1、HJ644-2013环境空气 挥发性有机物的测定 吸附管采样-热脱附/气相色谱-质谱法 2、HJ 583-...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号