非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM D5769-2015 前三页，或者稍后再访问。
5.1x00a0;Test methods to determine benzene and the aromatic content of gasoline are necessary to assess product quality and to meet fuel regulations.
5.2x00a0;This test method can be used for gasolines that contain oxygenates (alcohols and ethers) as additives. It has been determined that the common oxygenates found in finished gasoline do not interfere with the analysis of benzene and other aromatics by this test method.
1.1x00a0;This test method covers the determination of benzene, toluene, other specified individual aromatic compounds, and total aromatics in finished motor gasoline, including gasolines containing oxygenated blending components, by gas chromatography/mass spectrometry (GC/MS).
1.2x00a0;This test method has been tested for the following concentration ranges, in liquid volume percent, for the following aromatics: benzene, 0.18201;% to 48201;%; toluene, 18201;% to 138201;%; and total (C6 to C12) aromatics, 108201;% to 428201;%. The round-robin study did not test the method for individual hydrocarbon process streams in a refinery, such as reformates, fluid catalytic cracked naphthas, and so forth, used in the blending of gasolines.
1.3x00a0;Results are reported to the nearest 0.018201;% for benzene and 0.18201;% for the other aromatics by liquid volume.
1.4x00a0;This test method includes a relative bias section for EPA spark-ignition engine fuel benzene regulations reporting based on Practice accuracy assessment between Test Method and Test Method as a possible Test Method alternative to Test Method . The Practice derived correlation equation is only applicable for blended fuels in the benzene concentration range from 0.0 % to 2.50 % by volume as measured by Test Method . The applicable Test Method range for benzene is from 0.0 % to 2.47 % by volume as reported by Test Method .
1.5x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use.
Copyright ©2007-2016 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号