非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM C1589/C1589M-16 前三页，或者稍后再访问。
您也可以尝试购买此标准，
点击右侧 “购买” 按钮开始采购（由第三方提供）。
点击下载后，生成下载文件时间比较长，请耐心等待......
4.1 Tests conducted in accordance with this practice are used to evaluate the weatherability of construction seals and sealant materials when they are exposed to outdoor weather conditions. The weatherability of seals and sealants in actual outdoor use can be very different depending on the location because of differences in solar radiation, moisture, temperature, pollutants, and other factors. Sealant color may also affect weatherability.
4.2 This practice allows for three options: Option 1 – Procedure A in which the effect of movement during weathering is not considered; Option 2 – Procedure B in which specimens are weathered in conjunction with movement based on thermal changes. The applied strain is proportional to a combination of the temperature at the time the equipment is set up and subsequent thermal changes. This option closely mimics the actual movements that occur in many sealant installations, but is less repeatable than the movement in Procedure C; Option 3 – Procedure C in which the strain during weathering is manually applied. This procedure allows for excellent control and repeatability, but is less representative of movement in actual use conditions than the movement in Procedure B. Options 2 and 3 have been added to this practice based on peer reviewed scientific literature demonstrating that applied strain separately and in combination with other weathering stresses causes changes in the weatherability of sealants.
4.3 The type, frequency and amount of movement of sealants varies with location and may affect weatherability. It cannot be assumed, therefore, that results from one exposure in a single location will be useful for determining weatherability in a different location. Exposures in several locations with different climates (for example, solar radiation, moisture, temperature, pollutants, biological and other factors) that represent a broad range of anticipated service conditions are recommended.
4.4 It is strongly recommended that control materials of similar composition and construction to the test specimens and with known weatherability be exposed along with the test specimens for the purpose of comparing the performance of test materials to the controls. (See 6.2).
4.5 The results of short-term exposure tests can provide an indication of relative outdoor performance, but they shall not be used to predict the absolute long-term performance of a seal or sealant material. The results of tests conducted for less than 12 months will depend on the particular season of the year in which they begin.
4.6 Because of year-to-year climatatological variations, results from a single exposure test cannot be used to predict the absolute rate at which a seal or sealant degrades. Several years of repeat exposures are needed to determine an average test result for a given location.
4.7 Climatic and construction factors can impose cyclic movement upon sealed joints in use. This movement can impact the effects of outdoor weathering and often causes types of failure that are not produced by weathering without movement. Thus, the ability of building joint sealants to withstand temperature-induced movements of compression and expansion is an import......
一、名称、型号及规格 名称：水—紫外老化箱 型号：SZW-3二、执行标准 GB/T 13477—2002《建筑密封材料试验方法》 JC/T 485—2007《建筑窗用弹性密封剂》三、功能总述 水—紫外老化箱是根据GB 16676—2005《建筑用硅酮结构密封胶》、GB/T 14683—2003《硅酮建筑密封胶》、GB/T 13477—2002《建筑密封材料试验方法》等标准有关规定设计的。...
Atlas为各种建筑产品提供标准和定制的环境耐久性测试设备和服务，包括：l 窗饰产品和建筑玻璃l 沥青，聚合物和金属屋顶及通风口l 凉棚材料l 乙烯基，复合材料，木材和其他外墙材料l 建筑油漆和液体应用屏障l 建筑五金及配件，装饰用品l 土工膜，土工格栅，灌溉和排水l 木材，WPC复合材料，聚合物甲板和围栏l 混凝土，摊铺机，CMU着色剂和涂料l 建筑立面组件，胶粘剂和密封剂，EIFS材料l 工业和技术纺织品...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号