DIN EN 1366-11-2018
服务设施的防火试验.第11部分:电缆系统及其相关部件的防火系统;德文版本EN 1366-11-2018

Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components; German version EN 1366-11:2018

DIN EN 1366-11-2018 发布历史

This European Standard describes the method to evaluate the performance of protective systems for electrical cable and busbar systems in order to maintain the circuit integrity under fire conditions to classify the protective system according to EN 13501-3 for the P classification. The test examines the behaviour of cable protection systems exposed to fire from outside. The tests specified in this standard are not aimed for assessing the performance of the fire protective system and the penetration seal for maintaining the requirements of the penetrated wall or ceiling (classification E / I). This method is very different to EN 50200 for the PH classification and also to IEC 60331-11, IEC 60331-21, IEC 60331-23, and IEC 60331-25, which are not designed for fire protective systems for electrical cable systems. This standard should be used in conjunction with EN 1363-1. The test results apply to fire protective systems for electrical cable systems rated for voltages up to 1 kV. The test procedure should also be used to determine the performance of protective systems for use with data and optical cables, however, verification procedures for such cables are still under development. Proposals are given in Annex C. The protective system may include ventilation devices, inspection hatches, fixed or removable lids etc. The tests specified in this standard are not aimed for assessing the performance of sprayed or painted coatings (e. g. intumescent or ablative coating, plastic film, epoxy resin) and similar protective layers (e. g. wrap, bandage) applied directly on the cables or bus bars as fire protective system. Also, cables and bus bars with intrinsic resistance to fire, and without fire protective systems around, are excluded (see CENELEC standard EN 50577). This test method is not applicable for cabinets for electrical accessory containing bus systems, relays or similar.

DIN EN 1366-11-2018由德国标准化学会 DE-DIN 发布于 2018-07-00。

DIN EN 1366-11-2018 在中国标准分类中归属于: C80 消防综合，在国际标准分类中归属于: 13.220.50 建筑材料和构件的阻燃性,29.060.20 电缆,91.140.50 供电系统。

DIN EN 1366-11-2018 发布之时，引用了标准

• EN 1363-1-2012 耐火试验.一般要求
• EN 1363-2-1999 耐火试验.第2部分:替换和添加程序
• EN 13501-3+A1-2009 建筑产品和建筑元素的火灾分类.第3部分:依据建筑设施建设产品与元素的耐火测试分类:防火管道与防火阀
• EN 50200-2015 
• EN 50288-1-2013 
• EN 50288-7-2005 模拟和数字通信及控制中使用的多元件金属电缆.第7部分:仪器和控制电缆分规范
• EN 50289-1-4-2001 通信电缆.试验方法规范.第1-4部分:电气试验方法.绝缘电阻
• EN 50289-1-5-2001 通信电缆.试验方法规范.第1-5部分:电气试验方法.电容
• EN 50289-1-8-2017 
• EN 50289-1-11-2016 
• EN 50289-4-16-2016 
• EN 50363-0-2011 低压电缆的绝缘,铠装和包覆材料.第0部分:一般介绍
• EN 50363-1-2005 低压电缆的绝缘,铠装和包覆材料.第1部分:交联弹性绝缘化合物*， 2022-07-30 更新
• EN 50363-2-1-2005 低压电缆用绝缘,铠装和包覆材料.第2-1部分:交联弹性铠装化合物*， 2022-07-30 更新
• EN 50363-2-2-2005 低压电缆用绝缘,铠装和包覆材料.第2-2部分:交联弹性包覆化合物*， 2022-07-30 更新
• EN 50363-3-2005 低压电缆用绝缘,铠装和包覆材料.第3部分:PVC绝缘化合物*， 2022-07-30 更新
• EN 50363-4-1-2005 低压电缆用绝缘,铠装和包覆材料.第4-1部分:PVC铠装化合物*， 2022-07-30 更新
• EN 50363-4-2-2005 低压电缆用绝缘,铠装和包覆材料.第4-2部分:PVC包覆化合物*， 2022-07-30 更新
• EN 50363-5-2005 低压电缆的绝缘,铠装和包覆材料.第5部分:无卤素交联绝缘化合物(包括修改件A1-2011)*， 2022-07-30 更新
• EN 50363-6-2005 低压电缆的绝缘,铠装和包覆材料.第6部分:无卤素交联铠装化合物(包括修改件A1-2011)*， 2022-07-30 更新
• EN 50363-7-2005 低压电缆用绝缘,护套和包覆材料.第7部分:无卤素热塑性绝缘化合物*， 2022-07-30 更新
• EN 50363-8-2005 低压电缆的绝缘,铠装和包覆材料.第8部分:无卤素热塑性铠装化合物*， 2022-07-30 更新
• EN 50363-9-1-2005 低压电缆的绝缘,铠装和包覆材料.第9-1部分:混杂铠装复合物.交联聚氯乙烯(XLPVC)*， 2022-07-30 更新

* 在 DIN EN 1366-11-2018 发布之后有更新，请注意新发布标准的变化。

DIN EN 1366-11-2018的历代版本如下：

• 2018年07月 DIN EN 1366-11-2018 服务设施的防火试验.第11部分:电缆系统及其相关部件的防火系统;德文版本EN 1366-11-2018

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 1366-11-2018 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 1366-11-2018

发布日期

2018年07月

实施日期

废止日期

无

中国标准分类号

C80

国际标准分类号

13.220.50;29.060.20;91.140.50

发布单位

DE-DIN

引用标准

EN 1363-1-2012 EN 1363-2-1999 EN 13501-3+A1-2009 EN 50200-2015 EN 50288-1-2013 EN 50288-7-2005 EN 50289-1-4-2001 EN 50289-1-5-2001 EN 50289-1-8-2017 EN 50289-1-11-2016 EN 50289-4-16-2016 EN 50363-0-2011 EN 50363-1-2005 EN 50363-2-1-2005 EN 50363-2-1/A1-2011 EN 50363-2-2-2005 EN 50363-3-2005 EN 50363-3/A1-2011 EN 50363-4-1-2005 EN 50363-4-2-2005 EN 50363-5-2005 EN 50363-5/A1-2011 EN 50363-6-2005 EN 50363-6/A1-2011 EN 50363-7-2005 EN 50363-8-2005 EN 50363-8/A1-2011 EN 50363-9-1-2005 EN 50363-10-1-

被代替标准

DIN 4102-12-1998(部分代替)(部分代替) DIN EN 1366-11-2014

适用范围

This European Standard describes the method to evaluate the performance of protective systems for electrical cable and busbar systems in order to maintain the circuit integrity under fire conditions to classify the protective system according to EN 13501-3 for the P classification. The test examines the behaviour of cable protection systems exposed to fire from outside. The tests specified in this standard are not aimed for assessing the performance of the fire protective system and the penetration seal for maintaining the requirements of the penetrated wall or ceiling (classification E / I). This method is very different to EN 50200 for the PH classification and also to IEC 60331-11, IEC 60331-21, IEC 60331-23, and IEC 60331-25, which are not designed for fire protective systems for electrical cable systems. This standard should be used in conjunction with EN 1363-1. The test results apply to fire protective systems for electrical cable systems rated for voltages up to 1 kV. The test procedure should also be used to determine the performance of protective systems for use with data and optical cables, however, verification procedures for such cables are still under development. Proposals are given in Annex C. The protective system may include ventilation devices, inspection hatches, fixed or removable lids etc. The tests specified in this standard are not aimed for assessing the performance of sprayed or painted coatings (e. g. intumescent or ablative coating, plastic film, epoxy resin) and similar protective layers (e. g. wrap, bandage) applied directly on the cables or bus bars as fire protective system. Also, cables and bus bars with intrinsic resistance to fire, and without fire protective systems around, are excluded (see CENELEC standard EN 50577). This test method is not applicable for cabinets for electrical accessory containing bus systems, relays or similar.

DIN EN 1366-11-2018系列标准