IEC 60311-2016
家用或类似用途的电熨斗.性能测量方法

Electric irons for household or similar use - Methods for measuring performance


IEC 60311-2016 发布历史

This International Standard applies to electric irons for household or similar use. The purpose of this document is to state and define the principal performance characteristics of electric irons for household or similar use which are of interest to the user and to describe the standard methods for measuring these characteristics. Electric irons covered by this standard include dry irons; steam irons; vented steam irons with motor pump; spray irons; steam irons with separate water reservoir or boiler/generator having a capacity not exceeding 5 l. This document is concerned neither with safety nor with performance requirements. NOTE The primary characteristic to be taken into account in assessing the performance of an electric iron is its basic ability to produce a smooth finish to textile materials, without risk of scorching or other damage. lt has not proved possible to devise a single method which will measure this characteristic in a consistently reproducible way and measurements have therefore been included to check certain factors, such as the temperature of the sole- plate at the mid-point, sole-plate temperature distribution, etc., which affect the basic characteristic. In evaluating the results, while a very exceptional result in any one of them may significantly affect performance, there is considerable latitude in the combination of results which will give satisfactory ironing performance, and too much significance is not given to minor differences in any one result.

IEC 60311-2016由国际电工委员会 IX-IEC 发布于 2016-12。

IEC 60311-2016 在中国标准分类中归属于: Y63 家用电热器具,在国际标准分类中归属于: 97.060 洗衣设备。

IEC 60311-2016 发布之时,引用了标准

  • IEC 60051-1-2016 直接作用模拟指示电测量仪表及其附件 第1部分:定义和对所有部分通用的一般要求
  • IEC 60734-2012 家用电器. 性能. 试验用水
  • ISO 105-F01-2001 纺织品 色牢度试验 第F01部分:毛贴衬织物规范
  • ISO 105-F02-2009 纺织品.色牢度试验.第F02部分:棉花和粘胶纤维贴衬织物规范
  • ISO 105-F03-2001 纺织品 色牢度试验 第F03部分:聚酯贴衬织物规范
  • ISO 1518-1-2011 涂料和清漆.耐擦伤性测定.第1部分:横载荷方法
  • ISO 2409-2013 涂料和清漆.划格试验
  • ISO 3801-1977 纺织品.机织物.单位长度质量和单位面积质量的测定
  • ISO 6330-2012 纺织品.织物试验用家庭洗涤和烘干程序
  • ISO 7211-2-1984 纺织品 机织物 结构 分析方法 第2部分:单位长度纱线根数的测定
  • ISO 9073-2-1995 纺织品 非织造布试验方法 第2部分:厚度的测定
  • ISO 13934-1-2013 纺织品.织物拉伸特性.第1部分:使用条样法测定最大受力和最大受力时的伸长率

IEC 60311-2016的历代版本如下:

  • 1988年 IEC 60311-1988 家用或类似用途的电熨斗性能测量方法
  • 1995年10月 IEC 60311-1995 家用或类似用途的电熨斗.性能测量方法
  • 2002年09月 IEC 60311-2002 家用或类似用途的电熨斗.性能测量方法
  • 2005年12月16日 IEC 60311-2002/AMD1-2005 修改件1.家用或类似用途电熨斗.性能测量方法
  • 2009年06月16日 IEC 60311-2002/AMD2-2009 修改件2.家用或类似用途电熨斗.性能测量方法
  • 2016年12月 IEC 60311-2016 家用或类似用途的电熨斗.性能测量方法

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 IEC 60311-2016 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
IEC 60311-2016
发布日期
2016年12月
实施日期
废止日期
中国标准分类号
Y63
国际标准分类号
97.060
发布单位
IX-IEC
引用标准
IEC 60051-1-2016 IEC 60734-2012 ISO 105-F01-2001 ISO 105-F02-2009 ISO 105-F03-2001 ISO 1518-1-2011 ISO 2409-2013 ISO 3801-1977 ISO 6330-2012 ISO 7211-2-1984 ISO 9073-2-1995 ISO 13934-1-2013
被代替标准
IEC 59L/116/CDV-2015 IEC 60311-2002 IEC 60311 AMD 1-2005 IEC 60311 AMD 2-2009 IEC 60311 Edition 4.1-2006 IEC 60311 Edition 4.2-2009
适用范围
This International Standard applies to electric irons for household or similar use. The purpose of this document is to state and define the principal performance characteristics of electric irons for household or similar use which are of interest to the user and to describe the standard methods for measuring these characteristics. Electric irons covered by this standard include dry irons; steam irons; vented steam irons with motor pump; spray irons; steam irons with separate water reservoir or boiler/generator having a capacity not exceeding 5 l. This document is concerned neither with safety nor with performance requirements. NOTE The primary characteristic to be taken into account in assessing the performance of an electric iron is its basic ability to produce a smooth finish to textile materials, without risk of scorching or other damage. lt has not proved possible to devise a single method which will measure this characteristic in a consistently reproducible way and measurements have therefore been included to check certain factors, such as the temperature of the sole- plate at the mid-point, sole-plate temperature distribution, etc., which affect the basic characteristic. In evaluating the results, while a very exceptional result in any one of them may significantly affect performance, there is considerable latitude in the combination of results which will give satisfactory ironing performance, and too much significance is not given to minor differences in any one result.




Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号