ZH
RU
ES

Thermal Conductivity of Thermally Conductive Plastics

Thermal Conductivity of Thermally Conductive Plastics, Total:496 items.

In the international standard classification, Thermal Conductivity of Thermally Conductive Plastics involves: Plastics, Reinforced plastics, Ceramics, Wood, sawlogs and sawn timber, Protection of and in buildings, Heat recovery. Thermal insulation, Refractories, Test conditions and procedures in general, Farming and forestry, Pipeline components and pipelines, Aircraft and space vehicles in general, Conducting materials, Installations in buildings, Construction materials, Metrology and measurement in general, Surface treatment and coating, Gas and steam turbines. Steam engines, Insulating fluids, Mining and quarrying, Lubricants, industrial oils and related products, Rubber and plastics products, Cork and cork products, Semiconducting materials, Glass, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Testing of metals, Materials for the reinforcement of composites, Seals, glands, External sewage systems, Semiconductor devices, Thermodynamics and temperature measurements, Vocabularies, Rubber, Elements of buildings, Chipless working equipment, External water conveyance systems, Earthworks. Excavations. Foundation construction. Underground works, Insulating materials, Electrical wires and cables, Road vehicle systems, Fluid storage devices, Raw materials for rubber and plastics, Welding, brazing and soldering, Electrical accessories, Crude petroleum, Products of the textile industry, Soil quality. Pedology, Heat pumps, Products of the chemical industry, Gears.

CZ-CSN, Thermal Conductivity of Thermally Conductive Plastics

CSN 64 0526-1995 Testing of plastics. Determination of Thermal Conductivity
CSN 72 6040-1985 Refractory materials and produts. Determination of thermal conductivity by hot wire method.
CSN 72 7306-1995 Determination of Thermal Conductivity of building materials and products
CSN 72 7010-1988 Determination of thermal conductivity coefficient for materials in stabilized thermal state. Common provisions
CSN 72 7014-1994 Determination of Steady State Thermal Conductivity of Materials. Evaluating of Tests
CSN 72 7013-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of Globe
CSN 72 7011-1994 Determination of Steady State Thermal Conductivity of Materials. Methode of cylinder
CSN 72 7012-1973 Determination of thermal conductivity by the Poensgen method
CSN 72 7016-1967 Determination of thermal conductivity by the method of Nusselt
CSN 72 7015-1969 Determination of thermal conductivity by the Bock method
CSN 72 7017-1981 Determination of thermal conductivity by the box method
CSN 64 0528-1993 Plastics. Determination of coefficient of linear thermal expansion of plastics
CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 72 7010 Z1-1995
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
CSN 35 8785-1975 Semiconductor devices. Varicaps. Measurement of thermal capacitance coefflcient.
CSN 35 8850 Cast.1-1984 Semiconductor radiators. Main parameters of measuring methods
CSN 72 5033-1973 Tes.ting of fired ceramic rnaterials. Determination of medium temperatuie conductivity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermal Conductivity of Thermally Conductive Plastics

GB/T 3399-1982 Test method for thermal conductivity of plastics by means of the guarded hot plate
GB/T 42919.1-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 1: General rules
GB/T 3139-2005 Fiber-reinforced plastics composites-Determination of thermal conductivity
GB/T 42919.4-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 4: Laser flash method
GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis
GB/T 10297-2015 Test method for thermal conductivity of nonmetal solid materials.Hot-wire method
GB/T 10297-1998 Test method for thermal conductivity of nonmetal solid materials by hot-wire method
GB/T 5990-2006 Refractory materials. Determination of thermal conductivity. Hot-wire method
GB/T 42483-2023 Determination of thermal conductivity of wood by heat flow method
GB/T 42919.6-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 6: Comparative method based on temperature modulation technique
GB/T 32064-2015 Test method for thermal conductivity and thermal diffusivity of building materials with transient plane heat source
GB/T 17106-1997 Refractory materials--Determination of thermal conductivity--Hot-wire method (parallel)
GB/T 22588-2008 Determination of thermal diffusivity or thermal conductivity by the flash method
GB/T 8722-2008 Method for the determination of thermal conductivity of graphite materials at median temperature
GB/T 32981-2016 Method for determination of equivalent thermal conductivity of wall materials
GB/T 8722-1988 Method for the determination of thermal conductivity of graphite materials at median temperature
GB/T 3139-1982 Test method for thermal conductivity of glassfiber reinforced plastics
GB/T 5990-1986 Shaped insulating refractory products--Test method of the thermal conductivity (hot wire method)
GB/T 5598-2015 Test method for thermal conductivity of beryllium oxide ceramics
GB/T 5598-1985 Test method for thermal conductivity of beryllium oxide ceramics
GB/T 3651-2008 Measuring method for thermal conductivity of metal at high temperature
GB/T 3651-1983 Measuring method for thermal conductivity of metal at high temperature
GB/T 36133-2018 Refractory materials.Determination of thermal conductivity (Platinum resistance thermometer method)
GB/T 17911.8-2002 Refractory ceramic fibre products--Determination of thermal conductivity
GB/T 7962.13-1987 Colourless optical glass test methods--Coefficient of thermal conductivity
GB 7962.13-1987 Colorless optical glass test method thermal conductivity test method

International Organization for Standardization (ISO), Thermal Conductivity of Thermally Conductive Plastics

ISO/DIS 22007-4:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method
ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
ISO 2581:1975 Plastics; Rigid cellular materials; Determination of "apparent" thermal conductivity by means of a heat-flow meter
ISO 22007-2:2022 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-6:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 9967:1994 Thermoplastics pipes; determination of creep ratio
ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
ISO 22007-2:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-1:2009 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO/TR 4616:1980 Plastics — Determination of the thermal stability of polyvinyl chloride (PVC) — Conductometric method
ISO 9080:2003 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
ISO 22007-4:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
ISO 22007-7:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
ISO 22007-3:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
ISO 8894-2:1990 Refractory materials; determination of thermal conductivity; part 2: hot-wire method (parallel)
ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
ISO 11357-2:2013 Plastics-Differential scaming calorimetery(DSC)-Past 2:Determination of glass transition temperature and glass transition step height
ISO 11357-2:1999 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature
ISO 11357-6:2002 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determiantion of oxidation induction time
ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 17628:2015 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger
ISO 8894-1:1987 Refractory materials; Determination of thermal conductivity; Part 1 : Hot-wire method (cross-array)

British Standards Institution (BSI), Thermal Conductivity of Thermally Conductive Plastics

BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
BS EN ISO 22007-1:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
20/30394870 DC BS EN ISO 11357-8. Plastics. Differential scanning calorimetry. Part 8. Determination of thermal conductivity
BS EN ISO 22007-4:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
BS EN ISO 22007-2:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
BS EN 743:1995 Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion
BS ISO 18555:2016 Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings
BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN 638:1995 Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties
BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
BS EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Hot-wire methods (cross-array and resistance thermometer)
BS ISO 24449:2021 Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings at elevated temperature
BS EN ISO 22007-1:2017 Tracked Changes. Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN ISO 9967:1995 Thermoplastics pipes - Determination of creep ratio
PD IEC TR 63378-1:2021 Thermal standardization on semiconductor packages. Thermal resistance and thermal parameter of BGA, QFP type semiconductor packages
BS EN ISO 22007-4:2017 Tracked Changes. Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
BS EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
BS 4618 Sec.3.3:1973 Recommendations for the presentation of plastics design data. Thermal properties. Thermal conductivity
21/30427387 DC BS EN ISO 22007-2. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
BS ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
BS ISO 11357-2:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of glass transition temperature
BS ISO 23794:2023 Tracked Changes. Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
BS EN ISO 6946:2008 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS EN ISO 6946:2007 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
BS EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
BS ISO 2878:2011 Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance
BS DD CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Guidance for the assessment of conformity
23/30465226 DC BS EN ISO 22007-1. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 1. General principles
BS ISO 48-1:2018 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness. Introduction and guidance
14/30279095 DC BS ISO 18555. Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings
23/30466777 DC BS EN ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 4. Laser flash method
BS PD CEN/TS 1046:2021 Thermoplastics piping and ducting systems. Outside the building structures for gravity and pressurised systems. Trench installation
BS 874-3.2:1990 Methods for determining thermal insulating properties - Tests for thermal transmittance and conductance - Calibrated hot-box method
BS ISO 4664-1:2022 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. General guidance
BS DD CEN ISO/TS 15877-7:2010 Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity
BS DD CEN ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Guidance for the assessment of conformity
BS ISO 9869-2:2018 Thermal insulation. Building elements. In-situ measurement of thermal resistance and thermal transmittance. Infrared method for frame structure dwelling
BS ISO 2878:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance
20/30404373 DC BS ISO 24449. Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings at elevated temperature
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS 874-3.1:1987 Methods for determining thermal insulating properties - Tests for thermal transmittance and conductance - Guarded hot-box method
BS 5955-8:2001 Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
BS EN ISO 17628:2015 Geotechnical investigation and testing. Geothermal testing. Determination of thermal conductivity of soil and rock using a borehole heat exchanger
BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
21/30410870 DC BS ISO 4664-1. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Part 1. General guidance

German Institute for Standardization, Thermal Conductivity of Thermally Conductive Plastics

DIN EN ISO 22007-6:2015-05 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN ISO 22007-4:2017-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN EN ISO 11357-8:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021); German version EN ISO 11357-8:2021
DIN 50003:2023-08 Adhesive bondings in electronic applications - Determination of thermal conductivity of materials for heat dissipation / Note: Date of issue 2023-06-30
DIN EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008); German version EN ISO 22007-2:2012
DIN EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015); German version EN ISO 22007-2:2015
DIN EN ISO 22007-1:2018 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017
DIN EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009); German version EN ISO 22007-1:2012
DIN EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008); German version EN ISO 22007-4:2012
DIN EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN EN ISO 22007-1:2018-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017
DIN EN ISO 11357-8:2020 Plastics - Differential scanning calorimetry - Part 8: Determination of thermal conductivity (ISO/DIS 11357-8:2019); German and English version prEN ISO 11357-8:2019
DIN 52619-3:1985 Testing of thermal insulation; determination of the thermal resistance and the thermal transmission coefficient of windows; determination on frames
DIN EN ISO 9251:1996 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987); German version EN ISO 9251:1995
DIN EN ISO 22007-4:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023
DIN EN ISO 22007-4:2023-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 22007...
DIN CEN/TS 1159-4:2004-10 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004
DIN EN ISO 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023
DIN EN ISO 22007-1:2023-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN ISO 22007...
DIN 46220:1965 Cable sockets, hot pressed, cast for copper conductors
DIN 53752:1980 Testing of plastics; determination of the coefficient of linear thermal expansion
DIN EN 14982:2006 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness; English version of DIN EN 14982:2006-12
DIN EN ISO 23993:2011-02 Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01); German version EN ISO 23993:2010
DIN CEN/TS 15223:2018-01*DIN SPEC 16823:2018-01 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems; German version CEN/TS 15223:2017
DIN EN 1979:1999 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
DIN EN ISO 13787:2003 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003
DIN 52612-2:1984 Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications
DIN EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN EN ISO 13787:2003-07 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003
DIN EN ISO 8894-1:2010-10 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010); German version EN ISO 8894-1:2010
DIN CEN/TS 15223:2008 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems; German Version CEN/TS 15223:2008
DIN 47632-3:1978 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections
DIN EN ISO 17628:2015-12 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015); German version EN ISO 17628:2015

ES-UNE, Thermal Conductivity of Thermally Conductive Plastics

UNE-EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
UNE-EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
UNE-EN ISO 22007-2:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
UNE-EN ISO 22007-1:2018 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
UNE-CEN/TS 15223:2017 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems (Endorsed by Asociación Española de Normalización in January of 2018.)

RU-GOST R, Thermal Conductivity of Thermally Conductive Plastics

GOST 34374.2-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
GOST 21523.3-1987 Modified wood. Method for determination of thermal conductivity, heat conductivity and heat capacity
GOST 23630.2-1979 Plastics. Method for the determination of thermal conductivity
GOST R 54254-2010 Carbon materials. Test method for thermal conductivity at room temperature
GOST 25493-1982 Rocks. Method for determination of specific heat and temperature conductivity coefficient
GOST 25499-1982 Rocks. Method for determination of coefficient of thermal conductivity
GOST 12170-1985 Refractories. Stationary method of thermal conductivity determination
GOST 12170-2021 Refractories. Stationary method of thermal conductivity determination
GOST 14340.11-1969 Enamelled round winding wires. Method of the cut-through test
GOST 15173-1970 Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 7076-1999 Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7076-1978 Building materials. Method of thermal conductivity determination
GOST 7076-1987 Building materials and products. Method of thermal conductivity determination
GOST R ISO 580-2008 Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating
GOST ISO 12162-2006 Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service coefficient

European Committee for Standardization (CEN), Thermal Conductivity of Thermally Conductive Plastics

EN ISO 22007-2:2022 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
prEN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)
prEN ISO 22007-4 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023)
EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
EN ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
CEN ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
prEN 743-1992 Plastics piping and ducting systems; thermoplastics pipes; determination of the longitudinal reversion
prEN 638-1992 Plastics piping and ducting systems; thermoplastics pipes; determination of short-term tensile properties
prEN 763-1992 Plastics piping and ducting systems; injection-moulded thermoplastics fittings; test method for visually assessing effects of heating
EN 744:1995 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
prEN 744-1992 Plastics piping and ducting systems; thermoplastics pipes; test method for resistance to external blows by the round-the-clock-method
EN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
prEN 728-1992 Plastics piping and ducting systems; polyolefin pipes and fittings; determination of oxidation induction time
EN 1411:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
prEN 802-1992 Plastics piping and ducting systems; injection-moulded thermoplastics fittings for pressure piping systems; test methods for maximum deformation by crushing
EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
prEN ISO 22007-1 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007‑1:2023)
PD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011)
HD 402 S2-1984 Standard colours for thermoplastic materials used for the insulation for low-frequency cables and wires
EN 14982:2006 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (Incorporates Amendment A1: 2010)
EN 674:1997 Glass in Building - Determination of Thermal Transmittance (U Value) - Guarded Hot Plate Method
EN ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
PD CEN/TR 12108:2012 Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height

Danish Standards Foundation, Thermal Conductivity of Thermally Conductive Plastics

DS/EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
DS/EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
DS/EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
DS/EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
DS/EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
DS/EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
DS/EN 14982+A1:2011 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
DS/EN ISO 9080:2013 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
DS/EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)
DS/EN ISO 13787:2003 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity
DS/CEN/TS 15223:2008 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
DS/EN 993-15:2005 Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method
DS/EN ISO 580:2005 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings – Methods for visually assessing the effects of heating

CEN - European Committee for Standardization, Thermal Conductivity of Thermally Conductive Plastics

EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
PD CEN/TS 15223:2017 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems

Association Francaise de Normalisation, Thermal Conductivity of Thermally Conductive Plastics

NF EN ISO 22007-1:2017 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 1 : principes généraux
NF EN ISO 11357-8:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 8 : détermination de la conductivité thermique
NF X10-021:1972 Matériaux faiblement conducteurs - Détermination de la conductivité thermique - Méthode de la plaque chaude gardée avec échantillons symétriques
NF B40-316:1989 Refractory materials. Determination of thermal conductivity. Part 2 : hot-wire method (parallel).
NF T54-021:1994 Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion.
NF T54-036:1994 Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.
NF EN ISO 12631:2017 Performance thermique des façades-rideaux - Calcul du coefficient de transmission thermique
NF T51-227-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles.
NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
NF T51-227-6*NF EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6 :comparative method for low thermal conductivities using a temperature-modulation technique
NF EN ISO 22007-6:2015 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 6 : méthode comparative pour faibles conductivités thermiques utilisant une technique de modulation de la température
NF T51-227-1*NF EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles
NF EN ISO 22007-2:2022 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 2 : Méthode de la source plane transitoire (disque chaud)
NF T51-227-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disk) method.
NF T51-227-2*NF EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disc) method
NF EN ISO 22007-4:2017 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 4 : méthode flash laser
NF T51-227-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4 : laser flash method.
NF ISO 16957:2018 Détermination de la conductivité thermique apparente des matériaux de construction poreux et mouillés par une méthode périodique
NF T54-900*NF EN ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
NF P50-741*NF EN ISO 9251:1996 Thermal insulation. Heat transfer conditions and properties of materials. Vocabulary.
XP CEN/TS 1159-4:2005 Céramiques techniques avancées - Composites céramiques, propriétés thermophysiques - Partie 4 : détermination de la conductivité thermique
NF EN ISO 8894-1:2010 Matériaux réfractaires - Détermination de la conductivité thermique - Partie 1 : Méthodes du fil chaud ("croisillon" et "thermomètre à résistance")
NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
NF T54-097:1995 Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.
NF EN 1704:1997 Systèmes de canalisations en plastique - Robinets thermoplastiques - Méthode d'essai pour la vérification d'un robinet après des cycles thermiques sous flexion.
NF EN ISO 13787:2003 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination de la conductivité thermique déclarée
NF EN 61466-2/A1:2003 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination de la conductivité thermique déclarée
NF EN ISO 23993:2012 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination de la conductivité thermique utile
NF C26-305:1993 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 5 : guidelines for the application of thermal endurance characteristics.
NF EN ISO 17628:2018 Reconnaissance et essais géotechniques - Essais géothermiques - Détermination de la conductivité thermique des sols et des roches dans les sondes géothermiques
NF EN 761:1994 Systèmes de canalisations plastiques - Tubes plastiques thermodurcissables renforcés de verre (PRV) - Détermination du coefficient de fluage en condition sèche.
NF P50-737-2:2013 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: numerical method for frames
NF T54-045*NF EN 802:1994 Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.
NF T54-412*NF EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment

国家市场监督管理总局、中国国家标准化管理委员会, Thermal Conductivity of Thermally Conductive Plastics

GB/T 39862-2021 Test method for thermal conductivity of high thermal conductivity ceramics
GB/T 5990-2021 Refractory materials—Determination of thermal conductivity, specific heat capacity and thermal diffusivity(hot-wire method)
GB/T 37796-2019 Insulation refractories—Determination of thermal conductivity（calorimeter）
GB/T 8722-2019 Test method for thermal conductivity of carbon materials
GB/T 39704-2020 Determination of effective thermal conductivity for vacuum insulation panels(VIP)
GB/T 38712-2020 Test method for thermal conductivity of ultrathin glass—Heat flow method
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility

Lithuanian Standards Office , Thermal Conductivity of Thermally Conductive Plastics

LST EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008)
LST EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
LST EN 744-2001 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
LST EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
LST EN 14982-2006+A1-2010 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
LST EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
LST EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
LST EN ISO 13787:2004 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
LST EN 993-15-2005 Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method
LST EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)

Japanese Industrial Standards Committee (JISC), Thermal Conductivity of Thermally Conductive Plastics

JIS A 1412:1994 Test methods for thermal transmission properties of thermal insulations
JIS H 8453:2010 Measurement method for thermal conductivity of thermal barrier coatings
JIS H 8453:2018 Measurement method for thermal conductivity of thermal barrier coatings
JIS A 2106:2022 Thermal performance of metal curtain walling -- Simplified calculation method of thermal transmittance and solar heat gain coefficient
JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
JIS R 2251-2:2007 Test methods for thermal conductivity of refractory materials -- Part 2: Hot-wire method (parallel)
JIS R 2251-3:2007 Test methods for thermal conductivity of refractory materials -- Part 3: Stationary heat flow method
JIS A 1413:1977 Standard method of test for thermal conductivity of heat insulating materials by means of the guarded hot plate

FI-SFS, Thermal Conductivity of Thermally Conductive Plastics

AT-ON, Thermal Conductivity of Thermally Conductive Plastics

OENORM EN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)
ONORM EN 743-1994 Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion
ONORM B 6015-2-2000 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the specific thermal conductivity in building materials
ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
OENORM EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
ONORM M 7861 Teil.2-1987 Testing of welded joints in thermoplastics; tensile lest, short Urne welding coefficient

Korean Agency for Technology and Standards (KATS), Thermal Conductivity of Thermally Conductive Plastics

KS L 3306-2007 Testing method for thermal conductivity of firebricks by hot wire
KS L 9016-2010 Test methods for thermal transmission properties of thermal insulations
KS M ISO 13968:2008 Plastics piping and ducting systems-Thermoplastics pipes-Determination of ring flexibility
KS M ISO 13968:2015 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
KS L ISO 8894-2-2016(2021) Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS L 3121-2010 Testing method for thermal conductivity of insulating firebrick
KS L 3121-2015 Testing method for thermal conductivity of insulating refractory bricks
KS M ISO 23559:2014 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 23559:2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 2582-2004(2009) Cork and cork products－Determination of thermal conductivity－Hot plate method
KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS M ISO TR 9080:2015 Thermoplastics pipes for the transport of fluids--Methods of extrapolation of hydrostatic stress rupture data to determine the long--term hydrostatics strength of thermoplastics pipe materials
KS M ISO TR 9080:2003 Thermoplastics pipes for the transport of fluids-Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatics strength of thermoplastics pipe materials
KS L 9016-2010(2022) Test methods for thermal transmission properties of thermal insulations
KS M 3040-2011 Test method for coefficient of cubical thermal expansion of plastics
KS M 3040-1981 Test method for coefficient of cubical thermal expansion of plastics
KS F 2463-2009 Method of thermal conductivity test for materials
KS F 2463-1986 Method of thermal conductivity test for materials
KS M ISO 6946:2013 Building components and elements — Thermal resistance and thermal transmittance — Calculation method
KS M ISO 13787-2013(2018) Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
KS M 3040-2016(2021) Test method for coefficient of cubical thermal expansion of plastics
KS M 3060-1993 Testing method for coefficient of linear thermal expansion of plastics
KS L ISO 10051-2006(2021) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS M ISO 10051-2012(2017) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS L ISO 10051-2006(2016) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS L ISO 8894-1-2016(2021) Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
KS R ISO 7882-2005(2010) Road vehicles－Brake linings－Determination of thermal conductivity by guarded hot-plate apparatus
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS F 2463-2019 Standard test method of thermal conductivity for materials by means of the guarded hot plate
KS L ISO 8894-2:2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
KS L ISO 8894-2:2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS M ISO/CD 23483:2021 Determination of PAN-based carbon fibre tow characteristics — Thermal conductivity
KS M 6773-2009 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS M ISO 11357-2:2003 Plastics&##8722;Differential scanning calorimetry(DSC)-Part 2:Determination of glass transition temperature
KS M ISO 11357-6:2013 Plastics ㅡ Differential scanning calorimetry (DSC) ㅡ Part 6: Determination of oxidation induction time
KS M ISO 11357-6:2003 Plastics &##8722; Differential scanning calorimetry(DSC)-Part 6:Determination of oxidation induction time
KS M ISO 11357-2:2015 Plastics — Differential scanning calorimetry(DSC) — Part 2：Determination of glass transition temperature
KS M 3040-2016 Test method for coefficient of cubical thermal expansion of plastics
KS B 8291-1-2009 Ground source heat pump-Thermal conductivity test mothod-Part 1:Vertical close loop type and energy file type

RO-ASRO, Thermal Conductivity of Thermally Conductive Plastics

STAS 12058-1982 THERMAL CONDUCTIVITY MEASUREMENT OF PIPES INSULATION
STAS SR ISO 3915:1981 Plastics. Measurement of resistivity of conductive plastics
SR EN 638-1996 Plastics piping and ducting systems - Thermoplastics pipes-Determination of tensile properties
STAS SR ISO/TR 9080:1996 Thermoplastics pipes for the transport of fluids - Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
SR EN 763-1996 Plastics piping and ducting systems - injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating
STAS SR ISO 9251:1993 Thermal insulation. Heat transfer conditions and properties of materials. Vocabulary
STAS SR 13204-1994 Non destructive testing. Thermoelectric sorting method of conducting materials

Group Standards of the People's Republic of China, Thermal Conductivity of Thermally Conductive Plastics

T/GDASE 0006-2020 Determination for thermal emissivity and thermal conductivity of heat dissipation film
T/GDASE 0007-2020 Determination of thermal conductivity of graphene powder
T/JSXQX 006-2020 Low thermal conductivity inorganic foam insulation panels

CL-INN, Thermal Conductivity of Thermally Conductive Plastics

AENOR, Thermal Conductivity of Thermally Conductive Plastics

UNE-EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNE-EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
UNE-EN 744:1996 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
UNE 53126:2014 Plastics. Determination of coefficient of linear thermal expansion
UNE-EN 14982:2007+A1:2011 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
UNE-EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
UNE-EN ISO 13787:2003 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
UNE-EN 993-15:2005 Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method
UNE-EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)

IN-BIS, Thermal Conductivity of Thermally Conductive Plastics

Jiangsu Provincial Standard of the People's Republic of China, Thermal Conductivity of Thermally Conductive Plastics

DB32/T 3596-2019 Determination of thermal diffusivity and thermal conductivity of graphene materials by flash method

未注明发布机构, Thermal Conductivity of Thermally Conductive Plastics

DIN EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
DIN EN ISO 19629:2022 High-performance ceramics – Thermophysical properties of ceramic composite materials – Determination of one-dimensional thermal conductivity using flash methods
BS EN ISO 13787:2003(2020) Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
BS 1902-5.5:1991(2009) Methods of testing Refractory materials — Part 5 : Refractory and thermal properties — Section 5.5 Determination of thermal conductivity (panel / calorimeter method) (method 1902 - 505)

NL-NEN, Thermal Conductivity of Thermally Conductive Plastics

NEN 2444-1991 Determination of the heat resistance and/or the heat transfer co?ffici?nt for building and insulation materials

United States Navy, Thermal Conductivity of Thermally Conductive Plastics

NAVY MIL-B-82647 A NOTICE 2-2001 BAG, CONDUCTIVE PLASTIC, HEAT-SEALABLE, FLEXIBLE
NAVY MIL-B-82647 A-1986 BAG, CONDUCTIVE PLASTIC, HEAT-SEALABLE, FLEXIBLE
NAVY QPL-82646-3-1988 PLASTIC FILM, CONDUCTIVE, HEAT-SEALABLE, FLEXIBLE
NAVY MIL-DTL-82646 B-2008 PLASTIC FILM, CONDUCTIVE. HEAT-SEALABLE. FLEXIBLE

BE-NBN, Thermal Conductivity of Thermally Conductive Plastics

NBN EN 743-1994 Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion
NBN B 62-200-1978
NBN B 62-203-1978
NBN-EN 23994-1993 Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
NBN B 62-201-1977

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermal Conductivity of Thermally Conductive Plastics

ASHRAE MN-00-2-2-2000 Measurement of Thermal Conductivity for Three Borehole Fill Materials Used for GSHP
ASHRAE 3651-1993 Computational Frameworks for Numerical Assessment of Steady-State Conductive Heat Transfer Through Thermal Bridges

Sichuan Provincial Standard of the People's Republic of China, Thermal Conductivity of Thermally Conductive Plastics

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

GM North America, Thermal Conductivity of Thermally Conductive Plastics

GM 9984831-1989 Primer - Rigid, Conductive, for Thermoplastics
GM 9984815-1995 Flexible Primer - Conductive Thermoset
GM 9984830-1989 Primer - Rigid, Nonconductive, for Thermoplastics
GM 9984817-1989 Primer - Flexible, Thermoset, Nonconductive for Plastics

Taiwan Provincial Standard of the People's Republic of China, Thermal Conductivity of Thermally Conductive Plastics

CNS 7333-1981 Method of Determination for Thermal Conductivity of Heat Insulating Materials by Means of the Guarded Hot Plate
CNS 7332-1981 Method of Determination for Thermal Conductivity of Heat Insulating Materials by Means of Comparison with a Standard Plate of Known Conductivity

CH-SNV, Thermal Conductivity of Thermally Conductive Plastics

SN 210 901/4-1983 Textile floor coverings - Test Programme for the Classification into suitability ranges
VSM 10203-1970 Technical drawings - Guidelines for simplified drawing -Presentation and dimensioning
SN EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

UY-UNIT, Thermal Conductivity of Thermally Conductive Plastics

Professional Standard - Aviation, Thermal Conductivity of Thermally Conductive Plastics

HB 5367.9-1986 Test method for thermal conductivity of carbon graphite sealing materials

TR-TSE, Thermal Conductivity of Thermally Conductive Plastics

TS 389-1966 DETERMINATION OF THERMAL CONDUCTIVf?Y BY THE TUBE METHOD
TS 388-1977 Determination of Thermal Coadnctivity By a Plate Testing Apparatus
TS 1065-1972 COEFFICIENT OF LINEAR THERMAL EXPANSION OF PLASTICS

(U.S.) Plastic Pipe Association, Thermal Conductivity of Thermally Conductive Plastics

PPI TR-48-2014 R-Value and Thermal Conductivity of PEX and PE-RT

IT-UNI, Thermal Conductivity of Thermally Conductive Plastics

UNI EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
UNI 7745-1977

Shaanxi Provincial Standard of the People's Republic of China, Thermal Conductivity of Thermally Conductive Plastics

DB61/T 1609-2022 Method for determination of thermal conductivity of lubricating oil

Professional Standard - Building Materials, Thermal Conductivity of Thermally Conductive Plastics

JC/T 675-1997 Glass.The method for measuring thermal conductivity
JC/T 275-1980 Test method of heat conductivity coefficient of aerated concrete
JC 275-1980 Test method for thermal conductivity of air-entrained concrete

GOSTR, Thermal Conductivity of Thermally Conductive Plastics

GOST R 57967-2017 Composites. Determination of thermal conductivity by stationary one-dimensional heat flow heater with a guard
GOST R 57943-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4. Laser flash method

KR-KS, Thermal Conductivity of Thermally Conductive Plastics

KS M ISO 23559-2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS L ISO 8894-2-2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
KS M ISO/CD 23483-2021 Determination of PAN-based carbon fibre tow characteristics — Thermal conductivity
KS L ISO 8894-2-2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)

American National Standards Institute （ANSI), Thermal Conductivity of Thermally Conductive Plastics

ANSI/ASTM D3004:2008 Specification for Extruded Crosslinked and Thermoplastic Semi-conducting, Conductor and Insulation Shielding Materials
ISO/DIS 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ANSI/ASTM F1733a:2013 Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing
ANSI/ASTM D6095:2012 Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ANSI/ASTM D5930:2001 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

PL-PKN, Thermal Conductivity of Thermally Conductive Plastics

PN P04780-1974 Asbestos thermoisolation fibers and articles Determination of the coefficient of thermal conductivity
PN-EN ISO 11357-8-2021-08 E Plastics--Differential scanning calorimetry (DSC)--Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
PN H04181-1992 Refractory materials. Determination of thermal conductivity by hot-wire method

PT-IPQ, Thermal Conductivity of Thermally Conductive Plastics

NP 253-1985 Matériaux plastiques. Tubes en matlères thermoplastiques pour le transport des fluides. Diamètres extérieurs nominaux et pressions nomlnales
NP 68-1956
NP 2120-1986
NP 116-1962

API - American Petroleum Institute, Thermal Conductivity of Thermally Conductive Plastics

API PUBL 935-1999 Thermal Conductivity Measurement Study of Refractory Castables (First Edition)

Professional Standard - Ferrous Metallurgy, Thermal Conductivity of Thermally Conductive Plastics

YB/T 059-1994 Test method for thermal conductivity of thermal insulation panels (boiling plate method)
YB/T 5291-1999 Test method for thermal conductivity of carbon blocks in blast furnace
YB/T 4130-2005 Refractory materials Determination of thermal conductivity (calorimeter)

ZA-SANS, Thermal Conductivity of Thermally Conductive Plastics

SANS 6946:2007 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method

工业和信息化部, Thermal Conductivity of Thermally Conductive Plastics

YB/T 5291-2016 Test method for thermal conductivity of blast furnace carbon blocks
JB/T 13620.7-2018 Plastic injection mold hot runner system components Part 7: Valve needle guide sleeve

American Society for Testing and Materials (ASTM), Thermal Conductivity of Thermally Conductive Plastics

ASTM D3004-02 Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D3004-97 Standard Specification for Extruded Crosslinked and Thermoplastic Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D3004-08(2020) Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials
ASTM F433-98 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM E2584-20 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM D5930-01 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D5930-97 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D5930-16 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D864-52(1978) Method of Test for Coefficient of Cubical Thermal Expansion of Plastics
ASTM E1423-99 Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems
ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM D5470-17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D6095-99 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D5930-17 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D3004-08 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D3004-08(2013) Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM C201-93(1998) Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2004) Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2019) Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2013) Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2019)e1 Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2009) Standard Test Method for Thermal Conductivity of Refractories
ASTM D6095-05 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D5470-06 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D5470-06(2011) Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D5470-12 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D1518-85(2003) Standard Test Method for Thermal Transmittance of Textile Materials
ASTM D1518-11 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM D1042-12(2017) Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
ASTM D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM E977-05 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
ASTM E977-05(2014) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
ASTM C767-93(2009) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM E2584-14 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance 40;Slug41; Calorimeter
ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

National Aeronautics and Space Administration (NASA), Thermal Conductivity of Thermally Conductive Plastics

NASA-CR-2440-1974 Viscosity and thermal conductivity coefficients of gaseous and liquid oxygen

ESDU - Engineering Sciences Data Unit, Thermal Conductivity of Thermally Conductive Plastics

ESDU 02002-2002 Thermal conductivity of liquid aromatic compounds containing oxygen
ESDU 77024 B-1979 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of sea water and its concentrates.
ESDU 99005 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: inorganic gases.
ESDU 78029 B-1979 Equilibrium temperatures in self-contained bearing assemblies. Part IV: heat transfer coefficient and joint conductance.

International Electrotechnical Commission (IEC), Thermal Conductivity of Thermally Conductive Plastics

IEC TR 63378-1:2021 Thermal standardization on semiconductor packages - Part 1: Thermal resistance and thermal parameter of BGA, QFP type semiconductor packages
IEC TR 60216-5:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 5: guidelines for the application of thermal endurance characteristics

HU-MSZT, Thermal Conductivity of Thermally Conductive Plastics

Professional Standard - Water Conservancy, Thermal Conductivity of Thermally Conductive Plastics

SL 237-037-1999 Code for test of soil - thermal conductivity test of frozen soil

BR-ABNT, Thermal Conductivity of Thermally Conductive Plastics

ABNT EB-98-1973

Military Standard of the People's Republic of China-General Armament Department, Thermal Conductivity of Thermally Conductive Plastics

GJB/J 5128-2002 Specification for reference materials for thermal conductivity, specific heat, and coefficient of linear expansion for use in explosives

European Committee for Electrotechnical Standardization（CENELEC）, Thermal Conductivity of Thermally Conductive Plastics

HD 611.5 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 5: Guidelines for the Application of Thermal Endurance Characteristics

CO-ICONTEC, Thermal Conductivity of Thermally Conductive Plastics

ICONTEC 1332-1981

U.S. Military Regulations and Norms, Thermal Conductivity of Thermally Conductive Plastics

ARMY MIL-P-55072 A (1)-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)
ARMY MIL-P-55072 A-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)

Heilongjiang Provincial Standard of the People's Republic of China, Thermal Conductivity of Thermally Conductive Plastics

DB23/T 1905-2017 Method for determination of thermal conductivity of graphite film products at room temperature

Association of German Mechanical Engineers, Thermal Conductivity of Thermally Conductive Plastics

DVS 2205-1 Beiblatt 6-2013 Calculation of tanks and apparatus made of thermoplastics - Welding factors
DVS 2205-1 Beiblatt 6-2011 Calculation of tanks and apparatus made of thermoplastics - Welding factors
DVS 2205-1 Beiblatt 17-2006 Calculation of tanks and apparatus made of thermoplastics - Welding factors
DVS 2201-1 Beiblatt 3-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Linear thermal expansion coefficients
DVS 2201-1 Beiblatt 3-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Linear thermal expansion coefficients
DVS 2216-1 Beiblatt 1-2004
DVS 2215-1-2010 Heated tool welding of mouldings made of thermoplastics in series fabrication
DVS 2215-3 Beiblatt 1-1998
VDI 2736 Blatt 4-2016 Thermoplastic gear wheels - Determination of strength parameters on gears
DVS 2215-3 Beiblatt 1-1999 Hot plate welding of mouldings made from amorphous thermoplastics in volume production - Welding parameters for amorphous thermolastics and blends
DVS 2205-1 Beiblatt 10-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PP

Indonesia Standards, Thermal Conductivity of Thermally Conductive Plastics

SNI ISO 8894-2:2010 Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire methods (parallel)

Standard Association of Australia （SAA）, Thermal Conductivity of Thermally Conductive Plastics

AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

SE-SIS, Thermal Conductivity of Thermally Conductive Plastics

SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity