ZH
RU
ES
Test method for carbon fiber sheets
Test method for carbon fiber sheets, Total:499 items.
In the international standard classification, Test method for carbon fiber sheets involves: Materials for the reinforcement of composites, Reinforced plastics, Ceramics, Textile fibres, Inorganic chemicals, Plastics, Materials for aerospace construction, Aircraft and space vehicles in general, Seals, glands, Photography, Analytical chemistry, Fishing and fish breeding, Paper production processes, Surface treatment and coating, Products of the textile industry, Pulps, Products of the chemical industry, Farming and forestry, Insulating materials, Fibre optic communications, Paper and board, Heat recovery. Thermal insulation, Road vehicles in general, Semiconducting materials, Wood-based panels, Non-destructive testing, General methods of tests and analysis for food products, Construction materials, Pipeline components and pipelines, Packaging materials and accessories, Cases. Boxes. Crates, Refractories, Road vehicle systems, Non-ferrous metals, Shipbuilding and marine structures in general, Rubber and plastics products, Testing of metals, Sports equipment and facilities, Air quality, Tea. Coffee. Cocoa, Protection of and in buildings.
Korean Agency for Technology and Standards (KATS), Test method for carbon fiber sheets
- KS L 2522-2014(2019) Testing methods for carbon fibre woven fabrics
- KS L 2522-2014 Testing methods for carbon fibre woven fabrics
- KS L 2515-2009 Testing method for carbon fibers
- KS L 2515-2013 General rule testing methods for carbon fibers
- KS L 2515-1987 Testing method for carbon fibers
- KS M 3707-2002 TESTING METHODS FOR CARBON FIBER CONTENT AND VOID CONTENT OF CARBON FIBER REINFORCED PLASTICS
- KS M 3707-1992(1997) TESTING METHODS FOR CARBON FIBER CONTENT AND VOID CONTENT OF CARBON FIBER REINFORCED PLASTICS
- KS L 2522-2009 Testing methods for carbon fibre woven fabrics
- KS M 3708-2002 Testing method for bearing strength of carbon fiber reinforced plastics
- KS M 3709-1992(1997) TESTING METHODS FOR COMPRESSIVE PROPERTIES OF CARBON FIBER REINFORCEDPLASTICS
- KS L 2515-2013(2018) General rule testing methods for carbon fibers
- KS M 3709-2002 TESTING METHODS FOR COMPRESSIVE PROPERTIES OF CARBON FIBER REINFORCEDPLASTICS
- KS M 3708-2002(2012) Testing method for bearing strength of carbon fiber reinforced plastics
- KS M 3081-2009 Testing method for charpy impact strength of carbon fiber reinforced plastics
- KS M 3708-2014 Testing method for bearing strength of carbon fiber reinforced plastics
- KS M 7018-1995 Test method for fibre composition of paper
- KS K 0902-2002 Sampling method of cotton fibers for testing
- KS H 1205-2001 Testing method for crude fiber content
- KS M 1806-2008(2018) Test method of fibrous activated carbon
- KS M 7018-1985 Test method for fibre composition of paper
- KS K 0311-2018 Test method for length of cotton fibers: Fibrograph method
- KS K 0311-1985 Test method for length of cotton fibers: Fibrograph method
- KS K 0335-1998 TESTING METHODS FOR FISHING NET OF SYNTHETIC FIBRES
- KS M 3714-1992(1997) TESTING METHODS FOR IN-PLANE SHEAR PROPERTIES OF CARBON FIBER REINFORCED PLASTICS BY +-45 TENSION METHOD AND TWO PAIRS OF RAILS METHOD
- KS M 7091-2001 TESTING METHOD FOR FIBRE LENGTH OF PULP BY PROJECTION
- KS M 7091-1975 TESTING METHOD FOR FIBRE LENGTH OF PULP BY PROJECTION
- KS M 7091-2002 TESTING METHOD FOR FIBRE LENGTH OF PULP BY PROJECTION
- KS M 3714-2002 TESTING METHODS FOR IN-PLANE SHEAR PROPERTIES OF CARBON FIBER REINFORCED PLASTICS BY +-45 TENSION METHOD AND TWO PAIRS OF RAILS METHOD
- KS M 3712-2002 TESTING METHOD FOR APPARENT INTERLAMINAR SHEAR STRENGTH OF CARBON FIBER REINFORCED PLASTICS BY THREE POINT LOADING METHOD
- KS M 3712-1992(1997) TESTING METHOD FOR APPARENT INTERLAMINAR SHEAR STRENGTH OF CARBON FIBER REINFORCED PLASTICS BY THREE POINT LOADING METHOD
- KS L 6803-2012(2017) Carbon fiber－Determination of the tensile properties of the single-filament specimens
- KS L 6803-2012(2022) Carbon fiber－Determination of the tensile properties of the single-filament specimens
- KS L 6804-2012(2017) Carbon fibre－Determination of the tensile properties of the single-filament specimens
- KS K 0210-1-2008 Test methods for quantitative analysis of fibre mixtures of textiles-Test methods for fibre identification
- KS K 0210-1-2015 Test method for quantitative analysis of fibre mixtures of textiles — Test methods for fibre identification
- KS M 7085-2006 Testing method for cellulose in pulp
- KS M 7085-1975 Testing method for cellulose in pulp
- KS M 7085-2002 Testing method for cellulose in pulp
- KS M 3081-1994 Testing method for Charpy impact strength of carbon fiber reinforced plastics
- KS M 3081-2014 Testing method for charpy impact strength of carbon fiber reinforced plastics
- KS K 0310-2018 Testing method for length of cotton fibers: Diagram method
- KS K 0326-1993 Testing methods for rayon and acetate staple fibres
- KS K 0313-2000
- KS K 0210-1-2021 Test method for quantitative analysis of fibre mixtures of textiles — Test methods for fibre identification
- KS K 0327-1993 Test methods for synthetic staple fibres
- KS K ISO 21340:2022 Test methods for fibrous activated carbon
- KS K 0327-2021 Test method for man-made staple fibres
- KS M 3380-2009 General rules for testing methods of glass fiber reinforced plastics
- KS K 0170-2019 Test method for electrical surface resistivity of fabrics
- KS M 3713-2012(2017) Preparation of carbon fibre reinforced plastic panels for test purpose
- KS F 2244-2003 MEASURING METHOD FOR FIBER CONTENT OF GLASS FIBER REINFORCED PLASTICS
- KS M 7044-2016 Testing method for alpha, beta and gamma cellulose in pulp
- KS K 0121-2010 Test method for identification of dyestuff classes on dyed cellulosic textiles
- KS K 0121-1982 Test method for identification of dyestuff classes on dyed cellulosic textiles
- KS K 0314-2015 Test method for maturity of cotton fibers:Causticaire method
- KS K 0250-2019 Test method for nonfibrous materials in cotton: Enzyme method
- KS K 0250-1985 Test method for nonfibrous materials in cotton: Enzyme method
- KS K 0329-2017 Test method for synthetic fiber wadding
- KS K 0328-2021 Test method for melting point of synthetic fibers
- KS C IEC 60793-1-30:2003 Optical fibres－Part 1－30：Measurement methods and test procedures－Fibre proof test
- KS K ISO 11856:2009 Textile floor coverings-Test methods for the determination of fibre bind
- KS K ISO 11856:2015 Textile floor coverings — Test methods for the determination of fibre bind
- KS F 2565-2000 Method for tension test of steel fibers for concrete
- KS K ISO 11856:2016 Textile floor coverings — Test methods for the determination of fibre bind
- KS D 8508-1997(2017) Test method for tensile properties of fiber reinforced metals
- KS C IEC 60793-1-20:2003 Optical fibres－Part 1－20：Measurement methodsand test procedures－Fibre geometry
- KS C IEC 60793-1-34:2003 Optical fibres－Part 1－34：Measurement methods and test procedures－Fibre curl
- KS K 0751-1998 TESTING METHOD FOR DETERMINING APPARENT OPENING SIZE(AOS) OF GEOTEXTILE
- KS K 0324-2017 Test methods for wool fibres and hairs
- KS D 8513-2003(2018)
Japanese Industrial Standards Committee (JISC), Test method for carbon fiber sheets
- JIS K 7075:1991 Testing methods for carbon fiber content and void content of carbon fiber reinforced plastics
- JIS R 7602:1995 Testing methods for carbon fibre woven fabrics
- JIS R 7601:1986 Testing methods for carbon fibers
- JIS K 1477:1995 Test methods for fibrous activated carbon
- JIS K 1477:2007 Test methods for fibrous activated carbon
- JIS K 7071:1988 Testing methods for prepreg, carbon fiber and epoxy resins
- JIS K 7073:1988 Testing method for tensile properties of carbon fiber reinforced plastics
- JIS K 7074:1988 Testing methods for flexural properties of carbon fiber reinforced plastics
- JIS R 7602 AMD 1:2008 Testing methods for carbon fibre woven fabrics (Amendment 1)
- JIS R 7601 AMD 1:2006 Testing methods for carbon fibers (Amendment 1)
- JIS R 7606:2000 Carbon fibre -- Determination of the tensile properties of the single-filament specimens
- JIS L 1081:2014 Testing methods for wool fibres and hairs
- JIS L 1081:1998 Testing methods for wool fibres and hairs
- JIS K 7076:1991 Testing methods for compressive properties of carbon fibre reinforced plastics
- JIS K 7080:1991 Testing methods for bearing strength of carbon fiber reinforced plastics
- JIS K 7087:1996 Testing methods for tensile creep of carbon fibre reinforced plastics
- JIS K 7088:1996 Testing methods for flexural creep of carbon fibre reinforced plastics
- JIS L 1084:1992 Testing methods for flocked fabrics
- JIS L 1030-1:2006 Testing methods for quantitative analysis of fibre mixtures -- Part 1: Testing methods for fibre identification
- JIS L 1030-1:2012 Testing methods for quantitative analysis of fibre mixtures -- Part 1: Testing methods for fibre identification
- JIS L 1030-1:1998 Testing methods for quantitative analysis of fiber mixtures -- Part 1: Testing methods for fiber identification
- JIS K 7091:1996 Testing method for radiography of carbon fibre reinforced plastic panels
- JIS L 1097:1982 Testing methods for synthetic fibre wadding
- JIS K 7086:1993 Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics
- JIS K 7085:1993 Testing method for multiaxial impact behaviour of carbon fibre reinforced plastics
- JIS K 7081:1993 Testing method for exposure to natural weathering of carbon fibre reinforced plastic
- JIS L 1019:1999 Testing methods for cotton fiber
- JIS L 1019:2006 Testing methods for cotton fibres
- JIS K 7089:1996 Testing method for compression after impact properties of carbon fibre reinforced plastics
- JIS P 8120:1994 Testing method for fibre composition of paper
- JIS K 7093:2012 Test method for open-hole compressive strength of carbon fibre reinforced plastic
- JIS K 7094:2012 Test method for open-hole tensile strength of carbon fibre reinforced plastic
- JIS K 7092:2005 Test method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen
- JIS K 7077:1991 Testing method for charpy impact strength of carbon fiber reinforced plastics
- JIS K 7096:2017 Test method for through-thickness tensile properties of carbon fibre reinforced plastics -- Flexure method
- JIS L 1058:2005 Test methods for snag of woven fabrics and knitted fabrics
- JIS L 1058:2011 Test methods for snag of woven fabrics and knitted fabrics
- JIS L 1058:1995 Test methods for snag of woven fabrics and knitted fabrics
- JIS K 7090:1996 Testing method for ultrasonic pulse echo technique of carbon fibre reinforced plastic panels
- JIS K 4812:1978 Testing methods of nitrocellulose for smokeless powders
- JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
- JIS L 1030-2:1998 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 2: Testing methods for quantitative analysis of fibre mixtures
- JIS K 7078:1991 Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method
- JIS K 7095:2012 Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis
- JIS L 1015:1999 Test methods for man-made staple fibres
- JIS L 1015:2010 Test methods for man-made staple fibres
- JIS L 1015:2021 Test methods for man-made staple fibres
- JIS K 7082:1993 Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics
- JIS K 7052:1987 Measuring method for fiber content of glass fiber reinforced plastics
- JIS L 1081 AMD 1:2009 Testing methods for wool fibres and hairs (Amendment 1)
- JIS H 7402:1993 Test method for aspect ratio of short fiber in fiber reinforced metals
- JIS R 3420:1989 Testing methods for textile glass products
- JIS C 6190:1993 Test methods for fiber optic test sources
- JIS R 7212:1995 Testing methods for carbon blocks
- JIS K 7083:1993 Testing method for constant-load amplitude tension-tension fatigue of carbon fibre reinforced plastics
- JIS K 3850:1995 Measuring method for airborne fibrous particles
- JIS C 6823:1999 Measuring methods for attenuation of optical fibers
- JIS H 7403:1993 Test method for preferred fiber orientation parameter in fiber reinforced metals
- JIS K 7079:1991 Testing methods for in-plane shear properties of carbon fiber reinforced plastics by plus and minus 45 degrees tension method and two pairs of rails method
- JIS Z 0401:1995 Method of compression test for corrugated fibreboard
- JIS R 1657:2003 Testing methods of continuous ceramic fibers for continuous fiber-reinforced ceramic matrix composites
- JIS K 7080-2:2012 Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates
IN-BIS, Test method for carbon fiber sheets
RU-GOST R, Test method for carbon fiber sheets
American Society for Testing and Materials (ASTM), Test method for carbon fiber sheets
- ASTM D4018-17 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM D3532-99(2009) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM D4102-82(2004) Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM D4102-82(1999)e1 Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM D4018-23 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM F1225-99 Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
- ASTM F1225-99(2003) Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
- ASTM D4102-82(1999) Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM D4102/D4102M-22 Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM D5896-96(2001) Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
- ASTM D5896-96 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
- ASTM D5896-96(2019)e1 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
- ASTM D4102-82(2008) Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM D4102-82(2015) Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM D5104-96 Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
- ASTM D871-96 Standard Test Methods of Testing Cellulose Acetate
- ASTM D871-96(2004) Standard Test Methods of Testing Cellulose Acetate
- ASTM F1225-99(2008) Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
- ASTM D3513-02(2007) Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
- ASTM D3513-02 Standard Test Method for Overlength Fiber Content of Man-Made Staple Fiber
- ASTM D1926-95 Standard Test Methods for Carboxyl Content of Cellulose
- ASTM D1926-00 Standard Test Methods for Carboxyl Content of Cellulose
- ASTM D3516-89(2000) Standard Test Methods for Ashing Cellulose
- ASTM D1926-00(2006) Standard Test Methods for Carboxyl Content of Cellulose
- ASTM D3516-89(2006) Standard Test Methods for Ashing Cellulose
- ASTM D3516-89(1995)e1 Standard Test Methods for Ashing Cellulose
- ASTM D3516-89(2019)e1 Standard Test Methods for Ashing Cellulose
- ASTM D3532-99(2004) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM D5896-96(2007) Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
- ASTM D3532-99 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM D3531/D3531M-16 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM D3532/D3532M-19 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM D5896-96(2012) Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
- ASTM D5103-07 Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
- ASTM D5103-07(2018) Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
- ASTM D871-96(2010) Standard Test Methods of Testing Cellulose Acetate
- ASTM C209-20 Standard Test Methods for Cellulosic Fiber Insulating Board
- ASTM C209-12 Standard Test Methods for Cellulosic Fiber Insulating Board
- ASTM C209-15 Standard Test Methods for Cellulosic Fiber Insulating Board
- ASTM D1447-89(1994)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
- ASTM D1348-94(2003) Standard Test Methods for Moisture in Cellulose
- ASTM D1348-94(1998) Standard Test Methods for Moisture in Cellulose
- ASTM D5866-12(2020) Standard Test Method for Neps in Cotton Fibers
- ASTM D3531-99(2009) Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM D4018-11 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM D6942-03(2019) Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
- ASTM D2102-02(2012)e1 Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
- ASTM D5104-02 Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
- ASTM D817-12 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
- ASTM E2076/E2076M-10 Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
- ASTM D3800-16 Standard Test Method for Density of High-Modulus Fibers
- ASTM D4018-99(2004) Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM D4018-99 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM D4018-99(2008) Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM D3531/D3531M-11 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM D3532/D3532M-12 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM D2987-88(2002) Standard Test Method for Moisture Content of Asbestos Fiber
- ASTM D2987-88(2002)e1 Standard Test Method for Moisture Content of Asbestos Fiber
- ASTM D2987-88(2006) Standard Test Method for Moisture Content of Asbestos Fiber
- ASTM D4250-92(1999) Standard Test Method for Water-Holding Capacity of Bibulous Fibrous Products
- ASTM D519-04(2008) Standard Test Method for Length of Fiber in Wool Top
- ASTM D519-90(1995)e1 Standard Test Method for Length of Fiber in Wool Top
- ASTM D6961/D6961M-09(2015)e1 Standard Test Method for Color Measurement of Flax Fiber
- ASTM D8171-18 Standard Test Methods for Density Determination of Flax Fiber
- ASTM D2658-18 Standard Test Method for Determining Dimensions of Fiberboard Boxes
- ASTM D6961/D6961M-09(2021) Standard Test Method for Color Measurement of Flax Fiber
- ASTM D2658-18(2023) Standard Test Method for Determining Dimensions of Fiberboard Boxes
- ASTM D3513-02(2018) Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
- ASTM D1447-00 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
- ASTM D2968-95(2001) Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
- ASTM D2968-95(2008) Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
- ASTM C1936-23 Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control
- ASTM D914-95 Standard Test Methods for Ethylcellulose
- ASTM D914-00 Standard Test Methods for Ethylcellulose
- ASTM D914-00(2006) Standard Test Methods for Ethylcellulose
- ASTM D3531-99(2004) Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM D3531-99 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM D2968-13 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
- ASTM D3513-96 Standard Test Method for Overlength Fiber Content of Man-Made Staple Fiber
- ASTM D3513-02(2012) Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
- ASTM D3937-94 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
- ASTM D3937-01 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
- ASTM D3937-12(2018) Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
- ASTM D2968-95 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
- ASTM F3383-19 Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf
- ASTM F3383-19a Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf
- ASTM D6942-03 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
- ASTM D6942-03(2008) Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
- ASTM D817-12(2019) Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
- ASTM D6942-03(2012) Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
- ASTM D1445-05 Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
- ASTM D1445/D1445M-12 Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
- ASTM D737-96 Test Method for Air Permeability of Textile Fabrics
- ASTM D1103-60(1968) Method of Test for Alpha-Cellulose in Wood
- ASTM D1104-56 Method of Test for Holocellulose in Wood
- ASTM D914-12(2019) Standard Test Methods for Ethylcellulose
- ASTM D914-12 Standard Test Methods for Ethylcellulose
- ASTM D3516-89(2011) Standard Test Methods for Ashing Cellulose
- ASTM D6961-03 Standard Test Method for Color Measurement of Flax Fiber
- ASTM D6961/D6961M-09 Standard Test Method for Color Measurement of Flax Fiber
British Standards Institution (BSI), Test method for carbon fiber sheets
- BS 2880:1991 Methods of testing cellulose acetate flake
- BS 2880 Addendum No. 1:1959 Methods of testing cellulose acetate flake
- BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
- BS EN 15930:2010 Fibres. Elasticity of fibres. Test methods
- BS 7658-2:1993 Carbon fibre - Method for determination of linear density
- BS EN 13002-2:1999 Carbon fibre yarns - Test methods and general specifications
- BS EN 60793-1-34:2002 Optical fibres - Measurement methods and test procedures - Fibre curl
- BS EN 60793-1-34:2006 Optical fibres - Measurement methods and test procedures - Fibre curl
- BS EN 61068-2:1997 Polyester fibre woven tapes. Methods of test
- BS EN IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Methods of test
- BS EN 382-1:1993 Fibreboards - Determination of surface absorption - Fireboards - Determination of surface absorption - Test method for dry process fibreboards
- BS 6215-1:1981 Methods of test for agricultural food products. Determination of crude fibre content (general method)
- BS EN 2597:1998 Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
- BS EN 60793-1-30:2002 Optical fibres - Measurement methods and test procedures - Fibre proof test
- BS EN 60793-1-30:2011 Optical fibres. Measurement methods and test procedures. Fibre proof test
- BS EN 2562:1997 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
- BS ISO 10635:1999 Refractory products. Methods of test for ceramic fibre products.
- BS 6215-2:1981 Methods of test for agricultural food products. Determination of crude fibre content (modified Scharrer method)
- BS ISO 21340:2017 Test methods for fibrous activated carbon
- BS EN 2331:1993 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area
- BS EN 2561:1995 Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction
- BS ISO 1268-5:2001 Fibre-reinforced plastics - Methods of producing test plates - Filament winding
- BS EN 60793-1-20:2002 Optical fibres - Measurement methods and test procedures - Fibre geometry - Section 20: Fibre geometry measurement methods
- BS EN 60793-1-20:2014 Optical fibres. Measurement methods and test procedures. Fibre geometry
- BS EN IEC 60793-1-34:2021 Tracked Changes. Optical fibres. Measurement methods and test procedures. Fibre curl
- BS DD ISO/PAS 11856:2003 Textile floor coverings - Test methods for the determination of fibre bind
- BS 2610:1978 Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres
- BS EN 1170-3:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content of sprayed GRC
Association Francaise de Normalisation, Test method for carbon fiber sheets
- NF EN 15930:2010 Fibres - Élasticité des fibres - Méthodes d'essai
- NF G07-318*NF EN 15930:2010 Fibres - Elasticity of fibres - Test methods.
- NF T25-102*NF ISO 11566:1997 Carbon fibre. Determination of the tensile properties of single-filament specimens.
- NF EN 382-1:1993 Panneaux de fibres de bois - Détermination de l'absorption de surface - Partie 1 : méthode d'essai pour panneaux de fibres obtenus par procédé à sec.
- NF EN 382-2:1994 Panneaux de fibres - Détermination de l'absorption des surfaces - Partie 2 : méthode d'essai pour panneaux durs.
- NF EN 2597:1998 Série aérospatiale - Plastiques renforcés de fibres de carbone. Stratifiés unidirectionnels - Essai de traction perpendiculairement à la direction des fibres.
- NF EN 2562:1997 Série aérospatiale - Plastiques renforcés de fibres de carbone. Stratifiés unidirectionnels. Essai de flexion parallèle à la direction des fibres
- NF EN 2561:1996 Série aérospatiale - Plastiques renforcés de fibres de carbone - Stratifiés unidirectionnels - Essai de traction parallèlement à la direction des fibres
- NF ISO 1268-5:2002 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 5 : moulage par enroulement filamentaire
- NF EN 15586:2008 Textiles - Méthodes d'essai des tissus pour l'étanchéité aux fibres : essai par frottement
- NF C93-840-1-30:2002 Optical fibres - Part 1-30 : measurement methods and test procedures - Fibre proof test.
- NF G06-018:1971 Textiles. Tests for fibres. Determination of the quantity of acid contained in wool.
- NF G07-074:1987 Textiles. Fibre tests. Determination of flax fibre fineness. Permeametric methods.
- NF EN 14721+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durci
- NF EN 14721/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durci
- NF C93-840-1-34:2002 Optical fibres - Part 1-34 : measurement methods and test procedures - Fibre curl.
German Institute for Standardization, Test method for carbon fiber sheets
- DIN EN 15930:2010-12 Fibres - Elasticity of fibres - Test methods; German version EN 15930:2010
- DIN EN 382-2:1994-02 Fibreboards; determination of surface absorption; part 2: test method for hardboards; German version EN 382-2:1993
- DIN EN 382-1:1993-08 Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993
- DIN EN 2562:1997-05 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997
- DIN 53806:1970 Testing of textiles; determination of fibre length of cotton according to the comb staple method
- DIN EN 382-1:1993 Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993
- DIN 7738:1959-09 Laminated Products; Vulcanized Fibre, Acceptance, Test Methods
- DIN EN 2597:1998 Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction; German version EN 2597:1998
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test method for carbon fiber sheets
- GB/T 34520.2-2017 Test methods for continuous silicon carbide fiber—Part 2：Diameter of single-filament fiber
- GB/T 34520.5-2017 Test methods for continuous silicon carbide fiber—Part 5：Tensile properties of single-filament fiber
- GB/T 3362-2017 Test methods for tensile properties of carbon fiber multifilament
- GB/T 14190-2017 Testing methods of fiber grade polyester（PET）chip
- GB/T 34520.6-2017 Test methods for continuous silicon carbide fiber－Part 6：Resistivity
- GB/T 35931-2018 Test method for neps and short fiber content of cotton fibers—Photoelectric analyser
- GB/T 34520.1-2017 Test methods for continuous silicon carbide fiber—Part 1：Size content of filament yarn
- GB/T 34520.3-2017 Test methods for continuous silicon carbide fiber—Part 3：Linear density and density
- GB/T 34520.4-2017 Test methods for continuous silicon carbide fiber—Part 4：Tensile properties of filament yarn
- GB/T 34520.7-2017 Test methods for continuous silicon carbide fiber—Part 7 ：High temperature strength retention rate
- GB/T 35843-2018 Test method of fiber content of fiber reinforced concrete and its product
TR-TSE, Test method for carbon fiber sheets
- TS 934-1971 METHOD OF TEST FOR FIBRER LENGHTS WOOL AND SIMILAR FIBRES USING A COMB SARTER
- TS 1140-1973 METHOD OF TEST FOR FIBRE LENGTH OF WOLL AND SIMILAR FIBRES USING A SINGLE FIBRE LENGTH MEASURING MACHINE
- TS 65-1963 SAMPLING AND TESTING METHODS OF FIBREBOARD
国家市场监督管理总局、中国国家标准化管理委员会, Test method for carbon fiber sheets
- GB/T 34520.9-2021 Test methods of continuous silicon carbide fibers—Part 9：Carbon content
- GB/T 34520.8-2021 Test methods of continuous silicon carbide fibers—Part 8：Oxygen content
- GB/T 38138-2019 Test methods of fiber grade polycaprolactam (PA6) chip
Professional Standard - Textile, Test method for carbon fiber sheets
- FZ/T 50044-2018 Test method for carbon fiber ash content
- FZ/T 50032-2015 Determination of residual solvent content in PAN-based carbon fiber precursors
- FZ/T 50031-2015 Test mothod for moisture content and saturated water absorption of carbon fiber
- FZ/T 50060-2022 Carbon Fiber Alkali Metal and Alkaline Earth Metal Content Test Method
- FZ/T 50043-2018 Test method for oil content of polyacrylonitrile-based carbon fiber precursor
- FZ/T 50009.1-1998 Testing method for linear density of three-dimensional crimp polyester staple fibres.Measure at length of single fibres
- FZ/T 50009.2-1998 Testing method for average length of three-dimensional crimp polyester staple fibres.Measure at length of single fibres
- FZ/T 50029-2015 Test method for flame retardant property of synthetic fiber grade chips.Oxygen index method
- FZ/T 01057.7-1999 Test method for identification of textile fibres.Fibre melting point
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for carbon fiber sheets
- GB/T 3366-1996 Test method for fiber volume content of carbon fiber reinforced plastics
- GB/T 13779-2008 Cotton fibres.Test method for length.Comb sorter method
- GB/T 13779-1992 Test method for length of cotton fibres--Comb sorter method
- GB/T 3364-2008 Test methods for diameter of carbon fiber and filament number in carbon fiber strand
- GB/T 6501-2006 Test method for measure length of the wool fibre.Comb sorter method
- GB/T 6501-1986 Test Method for measure length of the wool fibre--Comb sorter
- GB/T 19599.1-2004 Testing method for fishing nets of synthetic fibre-Weight of netting
- GB/T 19599.2-2004 Testing method for fishing nets of synthetic fibre-Size of netting
- GB/T 3362-2005 Test methods for tensile properties of carbon fiber multifilament
- GB/T 14190-2008 Testing methods of fiber grade polyester chip
- GB/T 31292-2014 Carbon fibre.Determination of carbon content.Combustion absorption method
- GB/T 3365-2008 Carbon fiber reinforced plastics.Determination of void content and fiber volume content
- GB/T 3855-1983 Test method for resin content of carbon fiber reinforced plastics
- GB 3855-1983 Test method for resin content of carbon fiber reinforced plastics
- GB/T 3855-2005 Test method for resin content of carbon fiber reinforced plastics
- GB/T 6509-2005 Testing method for determination of low molecular weight compounds content in chip and fibres of polycaproamide
- GB/T 11447-1989 Methods of measurement of fibre-optic plates
- GB 11447-1989 Fiber Optic Panel Test Method
- GB/T 30866-2014 Test method for measuring diameter of monocrystalline silicon carbide wafers
- GB/T 32278-2015 Test method for flatness of silicon carbide single wafer
- GB/T 3362-2017/XG1-2019 Modification No. 1 of Test Method for Tensile Properties of Carbon Fiber Multifilament
- GB/T 3362-2017(XG1-2021) Modification No. 1 of Test Method for Tensile Properties of Carbon Fiber Multifilament
- GB/T 36526-2018 Test methods of industrial nitrocellulose
- GB/T 22208-2008 Test methods for marine no-asbestos fiber reinforced rubber gaskets
- GB/T 7690.5-2001 Reinforcement--Test method for yarns Part 5: Determination of fibre diameter for glass fibre
- GB/T 7690.5-2013 Reinforcements.Test method for yarns.Part 5:Determination of fiber diameter for glass fiber
- GB/T 4925-2008 Fishing nets.Method of test for the determination of strength and breaking elongation of netting of synthetic fiber
- GB/T 32497-2016 Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composites.V50 method
Indonesia Standards, Test method for carbon fiber sheets
Professional Standard - Machinery, Test method for carbon fiber sheets
Professional Standard - Aerospace, Test method for carbon fiber sheets
- QJ 3074-1998 Carbon fiber and its composite material resistivity test method
- QJ 1632-1989 Test method for impact toughness of carbon fiber reinforced plastic sheet
European Association of Aerospace Industries, Test method for carbon fiber sheets
- AECMA PREN 3675-1992 Aerospace Series Sampling Plan for Acceptance Testing of Aramid, Carbon Fibre and Textile Glass Filament Yarns Edition P 1
- AECMA PREN 2558-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Percentage of Volatile Matter Issue P 1
- AECMA PREN 2561-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Tensile Test Parallel to the Fibre Direction Issue P 1
- AECMA PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area Issue P 1
- AECMA PREN 2564-1988 Aerospace Series Carbon Fibre Laminates Test Method for the Determination of the Fibre and Resin Fractions and Porosity Content Issue P 1
Military Standard of the People's Republic of China-General Armament Department, Test method for carbon fiber sheets
- GJB 1871-1994 Test method for tensile properties of single carbon fiber
- GJB 2637-1996 Fatigue test method for carbon fiber resin matrix composite laminates
- GJB 6919-2009 Test and evaluation methods of conductorial-fibre performance
AT-ON, Test method for carbon fiber sheets
- ONORM B 3006-1985 Fiber building boards; test methods
- ONORM C 9441 Teil.2-1984 Testing of elastomers; staining of organic materials by vulcanized elastomers; extraction stain: method B1, method B 2 and method B 3
- ONORM S 1816-1982 Testing of textiles; quantitative analysis of binary mixtures, polyvinyl chloride fibres with other fibres; carbon disulphidel acetone method
- ONORM S 1876-1983 Testing of textiles; determination of the pH value of fibre materials; method by extraction
ZA-SANS, Test method for carbon fiber sheets
- SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram
- SANS 60793-1-20:2002 Optical fibres Part 1-20: Measurement methods and test procedures - Fibre geometry
European Committee for Standardization (CEN), Test method for carbon fiber sheets
- EN 15930:2010 Fibres - Elasticity of fibres - Test methods
- prEN 382-1-1992 Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards
- EN 13002-2:1999 Carbon Fibre Yarns - Part 2: Test Methods and General Specifications
- EN 2597:1998 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
Danish Standards Foundation, Test method for carbon fiber sheets
- DS/EN 15930:2010 Fibres - Elasticity of fibres - Test methods
- DS/EN 382-1:1994 Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards
- DS/EN 382-1:1993 Fibreboards. Determination of surface absorption. Part 1: Test method for dry process fibreboards
Lithuanian Standards Office , Test method for carbon fiber sheets
- LST EN 15930-2010 Fibres - Elasticity of fibres - Test methods
- LST EN 382-1-2000 Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards
AENOR, Test method for carbon fiber sheets
- UNE-EN 15930:2011 Fibres - Elasticity of fibres - Test methods
- UNE-EN 13002-2:2000 CARBON FIBER YARNS - PART 2: TEST METHODS AND GENERAL SPECIFICATIONS
- UNE 61600:1991 TESTING METHODS FOR CERAMIC FIBRE PRODUCTS
- UNE-EN 382-1:1994 FIBREBOARDS. DETERMINATION OF SURFACE ABSORPTION. PART 1: TEST METHOD FOR DRY PROCESS FIBREBOARDS.
- UNE-EN 2562:1997 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. FLEXURAL TEST PARALLEL TO THE FIBRE DIRECTION.
- UNE-EN 2561:1996 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. TENSILE TEST PARALLEL TO THE FIBRE DIRECTION.
- UNE 40152:1984 METHOD OF TEST FOR THE MEASURE OF LIBRE LENGTH BY INDIVIDUAL FIBRES TESTING
- UNE 40248-1:1975 IN METHOD FOR TRACTION TEST. DYNAMOMETRY OF FLAT BUNDLES OF WOOL FIBRES.
- UNE 21373-2:1992 SPECIFICATION FOR VULCANIZED FIBRE FOR ELECTRICAL PURPOSES. METHODS OF TEST.
- UNE-EN 2597:1999 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. TENSILE TEST PERPENDICULAR TO THE FIBRE DIRECTION.
未注明发布机构, Test method for carbon fiber sheets
- DIN EN 13002-2:1999 Carbon fiber yarns – Part 2: Test methods and general specifications
- BS ISO 11566:1996(1998) Carbon fibre — Determination of the tensile properties of single - filament specimens
- BS EN 2562:1997(1999) Carbonfibre reinforced plastics — Unidirectional laminates — Flexural test parallel to the fibre direction
- BS EN 382-1:1993(1999) Fibreboards — Determination of surface absorption — Part 1 : Test method for dry process fibreboards
- BS 2610:1978(1999) Method oftest for The determination of the cuprammonium fluidity ofcotton and certain cellulosic man - made fibres
- BS EN 382-2:1994(1999) Fibreboards — Determination of surface absorption — Part 2 : Test method for hardboards
- BS 5116:1974(1999) Method of test for Determination of breaking tenacity of flat bundles of cotton fibres
- BS EN 2331:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofthe resin and fibre content and mass offibre per unit area
- DIN EN 12467 Berichtigung 1:2001 Fiber cement panels – product specifications and testing methods
Group Standards of the People's Republic of China, Test method for carbon fiber sheets
- T/CSTM 00252-2020 Test method for carbon fiber electrical resistivity by Four-probe method
- T/CSTM 00250-2020 Test method for the axial thermal diffusivity of carbon fibers at high temperatures by the laser pulse method
- T/CSTM 00251-2020 Test method for axial average coefficient of linear expansion of carbon fibers by the push-rod differential dilatometer
- T/IAWBS 002-2017 Test method for surface defect of silicon carbide epitaxial wafer
- T/CTES 1031-2020 Test method of spreading effect of electronic fiberglass woven fabric
- T/IAWBS 014-2021 Test method for dislocation density of silicon carbide polished wafers
- T/CSTM 00443-2023 Test method of the tensile properties of single fiber—Balance method
Guangdong Provincial Standard of the People's Republic of China, Test method for carbon fiber sheets
- DB44/T 1720-2015 Test method for tensile properties of carbon fiber reinforced plastics
CZ-CSN, Test method for carbon fiber sheets
ES-AENOR, Test method for carbon fiber sheets
农业农村部, Test method for carbon fiber sheets
- NY/T 3272-2018 Cotton fiber physical properties test method AFIS single fiber tester method
Standard Association of Australia （SAA）, Test method for carbon fiber sheets
- AS 4143.6:1996 Methods of test for fibre ropes - Resistance to abrasion
- AS 3706.12:2001 Geotextiles - Methods of test - Determination of durability - Resistance to degradation by hydrocarbons or chemical reagents
- AS 4143.3:1993 Methods of test for fibre ropes - Sheath slippage
- AS 4143.6(Int):1993 Methods of test for fibre ropes Method 6: Resistance to abrasion
- AS 3706.3:2000 Geotextiles - Methods of test - Determination of tearing strength - Trapezoidal method
- AS 1012.25.1:2020 Methods of testing concrete, Method 25.1: Determination of the fibre content of plastic state concrete (wash-out test)
- AS 3706.5:2000 Geotextiles - Methods of test - Determination of puncture resistance - Drop cone method
- AS 2001.2.1:1988 Methods of test for textiles - Physical tests - Determination of mean fibre diameter of textile fibres by measurement of projected images
- AS 4143.4:1993 Methods of test for fibre ropes - Impact strength index
Aerospace, Security and Defence Industries Association of Europe (ASD), Test method for carbon fiber sheets
- ASD-STAN PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area (Issue P 1)
- ASD-STAN PREN 2564-1988 Aerospace Series Carbon Fibre Laminates Test Method for the Determination of the Fibre and Resin Fractions and Porosity Content (Issue P 1)
- ASD-STAN PREN 2560-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin Flow (Issue P 1)
- ASD-STAN PREN 2558-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Percentage of Volatile Matter (Issue P 1)
- ASD-STAN PREN 2557-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of Mass Per Unit Area (Issue P 1)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Test method for carbon fiber sheets
- PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area (Issue P 1)
- PREN 2565-1987 Preparation of Carbon Fibre Reinforced Resin Panels for Test Purposes
- PREN 2564-1988 Aerospace Series Carbon Fibre Laminates Test Method for the Determination of the Fibre and Resin Fractions and Porosity Content (Issue P 1)
- PREN 2560-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin Flow (Issue P 1)
- PREN 2558-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Percentage of Volatile Matter (Issue P 1)
Professional Standard - Customs, Test method for carbon fiber sheets
- HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer
PL-PKN, Test method for carbon fiber sheets
- PN P04761-02-1992 Test methods for row materials Man-made fibres Determination of the length of staple fibres
The American Road & Transportation Builders Association, Test method for carbon fiber sheets
International Organization for Standardization (ISO), Test method for carbon fiber sheets
- ISO 11566:1996 Carbon fibre - Determination of the tensile properties of single-filament specimens
- ISO 22821:2021 Carbon-fibre-reinforced composites - Determination of fibre weight content by thermogravimetry (TG)
- ISO/PAS 11856:2003 Textile floor coverings - Test methods for the determination of fibre bind
Professional Standard - Commodity Inspection, Test method for carbon fiber sheets
- SN/T 0565-1996 Test method for length of the textile fibres for import and export with fibre length instrument
Professional Standard - Aviation, Test method for carbon fiber sheets
- HB 6741-1993 Method for compressive test of open hole on laminated sheet of carbon fiber composite materials
- HB 6740-1993 Open hole tensile test method for carbon fiber composite laminates
- HB 5440-1989 Tensile-tensile fatigue test method for carbon fiber resin matrix composites
- HB 7624-1998 Bending fatigue test method for carbon fiber composite laminates
- HB 6739-1993 Compression test method for carbon fiber composite laminates after impact
- HB 5439-1989 Tension-compression and compression-compression fatigue test methods for carbon fiber resin composites
- HB 7071-1994 Method for tensile test of edge delamination on laminated sheet of carbon fiber composite materials
- HB 7625-1998 Tensile test method for carbon fiber composite laminates in hot and humid environment
- HB 7626-1998 Compression test method for carbon fiber composite laminates in hot and humid environment
YU-JUS, Test method for carbon fiber sheets
Professional Standard - Ocean, Test method for carbon fiber sheets
- HY/T 050-1999 Test methods for hollow fiber ultrafiltration membranes
- HY/T 051-1999 Test methods for hollow fiber microporous membranes
- HY/T 049-1999 Test methods for hollow fiber reverse osmosis membranes
- HY/T 054.2-2001 Hollow fiber reverse osmosis technology----Testing methods for hollow fiber RO module
VE-FONDONORMA, Test method for carbon fiber sheets
BE-NBN, Test method for carbon fiber sheets
- NBN-EN 382-1-1994 Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards
- NBN-EN 382-2-1994 Fibreboards - Determination of surface absorption - Part 2: Test method for hardboards
ES-UNE, Test method for carbon fiber sheets
- UNE-EN 2850:2017 Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction (Endorsed by Asociación Española de Normalización in December of 2017.)
KR-KS, Test method for carbon fiber sheets
Jiangsu Provincial Standard of the People's Republic of China, Test method for carbon fiber sheets
- DB32/T 1824-2011 Determination of poultry muscle fiber properties by paraffin section method
Society of Automotive Engineers (SAE), Test method for carbon fiber sheets
- SAE J913-2021 Test Method for Wicking of Automotive Fabrics and Fibrous Materials
- SAE J913-2010 Test Method for Wicking of Automotive Fabrics and Fibrous Materials
- SAE J913-1994 TEST METHOD FOR WICKING OF AUTOMOTIVE FABRICS AND FIBROUS MATERIALS
- SAE J913-1996 Test Method for Wicking of Automotive Fabrics and Fibrous materials
CU-NC, Test method for carbon fiber sheets
- NC 40-123-1986 Textiles. Determination of Cotton Fibers Length. Testing Method
Professional Standard - Electron, Test method for carbon fiber sheets
- SJ/T 11504-2015 Test method for measuring surface quality of polished monocrystalline silicon carbide
- SJ/T 11503-2015 Test methods for measuring surface roughness of polished monocrystalline silicon carbide wafers
SAE - SAE International, Test method for carbon fiber sheets
- SAE J913-1985 Test Method for Wicking of Automotive Fabrics and Fibrous Materials
GM North America, Test method for carbon fiber sheets
- GM GM9337P-1998 Test Method to Determine Fiber Weight Loss and Wear on Carpet
International Electrotechnical Commission (IEC), Test method for carbon fiber sheets
- IEC 60793-1-34:2006 Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl
RO-ASRO, Test method for carbon fiber sheets