ZH
RU
ES

Feature Detection Capabilities

Feature Detection Capabilities, Total:499 items.

In the international standard classification, Feature Detection Capabilities involves: Ventilators. Fans. Air-conditioners, Diagnostic, maintenance and test equipment, Quality, Metrology and measurement in general, Fluid storage devices, Elements of buildings, Resistors, Structure and structure elements, Magnetic materials, Electrical and electronic testing, Non-destructive testing, Wastes, Civil engineering in general, Structures of buildings, Electric road vehicles, Medical sciences and health care facilities in general, Mechanical testing, Welding, brazing and soldering, Vocabularies, Rotating machinery, Vacuum technology, Fluid power systems, Fasteners, Electrical engineering in general, Farming and forestry, Acoustics and acoustic measurements, Bearings, Refrigerating technology, Equipment for petroleum and natural gas industries, Water quality, Protective equipment, Technical drawings, Leather technology, Company organization and management, Laboratory medicine, Optics and optical measurements, Analytical chemistry, Aids for disabled or handicapped persons, Components for electrical equipment, Occupational safety. Industrial hygiene, Earthworks. Excavations. Foundation construction. Underground works, Earth-moving machinery, Protection against fire, Radiation measurements, Construction industry, Galvanic cells and batteries, Wind turbine systems and other alternative sources of energy, Footwear, Construction materials, Power stations in general, Biology. Botany. Zoology, Applications of information technology, Pumps, Cutting tools, Burners. Boilers, Air quality, Chipless working equipment, Alarm and warning systems, Electronic display devices, Electrical equipment for working in special conditions, Miscellaneous domestic and commercial equipment, Plastics, Motor cycles and mopeds, Road vehicles in general, Iron and steel products, Energy and heat transfer engineering in general, Measurement of fluid flow, Industrial automation systems, Cellular materials, Commercial vehicles, Test conditions and procedures in general, Characteristics and design of machines, apparatus, equipment, Geology. Meteorology. Hydrology, Products of the chemical industry, Microbiology, Rubber, Lubricants, industrial oils and related products, Photography.

HU-MSZT, Feature Detection Capabilities

German Institute for Standardization, Feature Detection Capabilities

DIN 24163-1:1985 Fans; performance testing, standard characteristics
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN EN 14701-4:2019 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge
DIN EN 13477-2:2021-12 Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics; German version EN 13477-2:2021
DIN ISO 11843-2 Berichtigung 1:2008-06 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)
DIN ISO 11843-5:2010-08 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
DIN EN ISO 13997:1999 Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999); German version EN ISO 13997:1999
DIN 15400:1990 Lifting hooks; materials, mechanical properties, lifting capacity and stresses
DIN ISO 9962-2:1993 Manually operated draughting machines; characteristics, performance, inspection and marking; identical with ISO 9962-2:1992
DIN CEN/TS 16660:2015-08*DIN SPEC 19638:2015-08 Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity; German version CEN/TS 16660:2015
DIN 18132:2012 Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18132:1995 Soil, testing procedures and testing equipment - Determination of water absorption
DIN ISO 11843-1:2004 Capability of detection - Part 1: Terms and definitions (ISO 11843-1:1997, including Technical Corrigendum 1:2003)
DIN ISO 11843-1:2004-09 Capability of detection - Part 1: Terms and definitions (ISO 11843-1:1997, including Technical Corrigendum 1:2003)
DIN EN 13477-2:2010 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic; German version EN 13477-2:2010
DIN EN 13477-2:2013 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic; German version EN 13477-2:2010
DIN 53323:1974 Testing of leather; determination of the stress-strain behaviour during vaulting and bursting test
DIN 24163-2:1985 Fans; performance testing, standardized test airways
DIN EN 13068-1:2000-02 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties; German version EN 13068-1:1999
DIN 52459:1981 Testing of building sealants; determination of the water absorption of backfill material; retentive capacity
DIN 44974-2:1978-12 Electric household fans; characteristics of performance, tests

Jilin Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB22/T 1549-2012 Specifications for evaluation of testing capabilities of automobile comprehensive performance testing stations

British Standards Institution (BSI), Feature Detection Capabilities

BS ISO 11843-7:2012 Capability of detection. Methodology based on stochastic properties of instrumental noise
BS ISO 11843-7:2018 Tracked Changes. Capability of detection. Methodology based on stochastic properties of instrumental noise
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS PD CEN/TS 16660:2015 Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacit
PD ISO/TS 23367-1:2022 Nanotechnologies. Performance characteristics of nanosensors for chemical and biomolecule detection. Detection performance
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-1:2000 Capability of detection - Terms and definitions
BS ISO 11843-1:1997 Capability of detection - Terms and definitions
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS DD CEN/TS 15364:2006 Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
BS EN 1986-2:2001 Electrically propelled road vehicles - Measurement of energy performances - Thermal electric hybrid vehicles
BS EN ISO 16827:2014 Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities
PD ISO/TR 11843-8:2021 Capability of detection. Guidance for the implementation of the ISO 11843 series
BS EN IEC 61400-21-1:2019+A11:2020 Wind energy generation systems - Measurement and assessment of electrical characteristics. Wind turbines
BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance. Capability of measurement processes
BS ISO 11843-4:2003 Capability of detection - Methodology for comparing the minimum detectable value with a given value
BS ISO 17559:2003 Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
BS EN ISO 15548-1:2013 Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
BS ISO 13064-2:2012 Battery-electric mopeds and motorcycles. Performance. Road operating characteristics
BS EN 10273:2000 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN ISO 15548-2:2008 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification
BS EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification
BS EN ISO 15548-2:2013 Non-destructive testing. Equipment for eddy current examination. Probe characteristics and verification

YU-JUS, Feature Detection Capabilities

JUS C.A4.019-1986 Mechanlcal testing ofmetals. VVrapping test of wire
JUS B.B7.113-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of apparent density
JUS C.A5.062-1989 Metals tests. Determination of resistance to intergranular conosion by Monypenny Strauss test
JUS H.Z8.054-1984 Testing of engine antifreezes. Detsrmination of distillations characteristics

Danish Standards Foundation, Feature Detection Capabilities

DS/ISO 11843-7:2012 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
DS/EN 14701-4:2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DS/ISO 11843-1/Corr.1:2004 Capability of detection - Part 1: Terms and definitions
DS/ISO 11843-1:2003 Capability of detection - Part 1: Terms and definitions
DS/EN 14701-2:2013 Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration
DS/ISO 11843-4:2004 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
DS/EN 61400-21:2009 Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines
DS/EN 13068-1:2002 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
DS/ISO/TR 22514-4:2008 Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures

BE-NBN, Feature Detection Capabilities

NBN-ISO 4392-2:1990 Hydraulic fluid power - Determination of characteristics of motors - Startability
NBN-ISO 4707:1992 Cork. Stoppers. Sampling for inspection for dimensional characteristics

Professional Standard - Agriculture, Feature Detection Capabilities

122药典四部-2020 0900 Property inspection method 0952 Adhesion determination method
141药典四部-2015 0900 Property inspection method 0952 Adhesion determination method
121药典四部-2020 0900 Property inspection method 0951 Determination method for aerodynamic properties of fine particles of inhalation preparations
140药典四部-2015 0900 Property inspection method 0951 Determination method for aerodynamic properties of fine particles of inhalation preparations
125药典四部-2020 0900 characteristic inspection method 0983 cone penetration measurement method
144药典四部-2015 0900 characteristic inspection method 0983 cone penetration measurement method

DE-GPVA, Feature Detection Capabilities

AD 2000-Merkblatt HP30-2016 Manufacture and testing of pressure vessels. Performance of pressure tests
AD 2000-Merkblatt B 5-2016 eng Manufacture and testing of pressure vessels. Performance of pressure tests
AD 2000-Merkblatt HP801 No.10-2002 Manufacture and testing of pressure vessels.Special pressure vessels.Spray pressure vessels
AD 2000-Merkblatt HP801 No.25-2004 Manufacture and testing of pressure vessels.Special pressure vessels.Liquefied gas storage vessel installation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Feature Detection Capabilities

GB/T 9158-2015 Test methods of mechanics performance for windows and doors in building
GB/T 17993-2005 General requirements for the competence of automotive multiple-function test station
GB/T 28880-2012 Non-destructive testing.Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
GB/T 28280-2012 Plain bearings.Quality characteristics.Calculation of machine and process capabilities
GB/T 21486-2008 Hydraulic fluid power.Filter elements.Sequence of tests for verifying performance characteristics
GB/T 27669-2011 Non-destructive testing.Ultrasonic inspection.Evaluating electronic characteristics of ultrasonic test instruments
GB/T 29790-2013 Point-of-care testing (POCT).Requirements for quality and competence
GB/T 50269-1997 Code for measurement method of dynamic properties of subsoil
GB/T 50269-2015 Specifications for testing dynamic characteristics of foundations
GB/T 31960.10-2016 Technical specification of power energy efficiency monitoring system.Part 10:Test specification of power energy efficiency monitor terminal
GB/T 20320-2023 Measurement and evaluation method of electrical characteristics of wind turbines in wind power generation system
GB/T 14480.3-2008 Non-destructive testing.Equipment for eddy current examination.Part 3:System characteristics and verification
GB/T 29302-2012 Non-destructive testing instruments.Characterization and verification of phased array ultrasonic examination systems
GB/T 18451.2-2012 Power performance measurements of electricity producing wind turbines
GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
GB/T 36110-2018 Sealing performances and test procedures of museum showcase
GB/T 11543-2008 Surface active agents.The identification of emulsion for moderate to high viscosity and the evaluation method of emulsifying capability
GB/T 11543-1989 Surface active agents--The identification of emulsions of moderate to high viscosity and the method of evaluation of their capability of emulsifying
GB/T 22149-2008 Overhead projectors.Methods for measuring performance characteristics
GB/T 27664.1-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
GB/T 27664.2-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes

International Organization for Standardization (ISO), Feature Detection Capabilities

ISO/CD 11843-7 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case
ISO/TS 23367-1:2022 Nanotechnologies — Performance characteristics of nanosensors for chemical and biomolecule detection — Part 1: Detection performance
ISO 2320:2008 Prevailing torque type steel nuts - Mechanical and performance properties
ISO 22514-5:2019 Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
ISO 11170:2003 Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
ISO 1607-2:1978 Positive displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure
ISO 11843-7:2012 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11843-7:2018 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
ISO 1608-2:1989 Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure
ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
ISO/TR 15656:2003 Fire resistance - Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour
ISO 10765:2010 Footwear - Test method for the characterization of elastic materials - Tensile performance
ISO 11170:2013 Hydraulic fluid power - Sequence of tests for verifying performance characteristics of filter elements
ISO 17559:2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
ISO 2320:1972 Title missing - Legacy paper document
ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties
ISO 22514-7:2012 Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
ISO/DIS 15548-3:2006 Non-destructive testing-Equipment for eddy current examination-Part 3:System characteristics and verification
ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 9962-2:1992 Manually operated draughting machines; part 2: characteristics, performance, inspection and marking
ISO/TR 22514-4:2007 Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
ISO 22514-4:2016 Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
ISO 11843-5:2008/Amd 1:2017 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases; Amendment 1
ISO 18415:2007 Cosmetics - Microbiology - Detection of specified and non-specified microorganisms
ISO 18415:2017 Cosmetics - Microbiology - Detection of specified and non-specified microorganisms
ISO 18175:2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
ISO 22232-2:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
ISO 3051:1974 Gypsum plasters; Determination of mechanical properties

Korean Agency for Technology and Standards (KATS), Feature Detection Capabilities

KS Q ISO 11843-7:2019 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case
KS A ISO 21747-2008(2013) Statistical methods－Process performance and capability statistics for measured quality characteristics
KS B 0534-1995 Method for assessing the overall performance characteristics of ultrasonic pulse echo testing instrument
KS B ISO 1607-2:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics- Part 2:Measurement of ultimate pressure
KS B ISO 1607-2:2013 Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO 2320:2003 Prevailing torque type steel hexagon nuts－Mechanical and performance properties
KS B ISO 11170:2009 Hydraulic fluid power-Filter elements-Procedure for verifying performance characteristics
KS B ISO 11170:2014 Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements
KS B ISO 1608-2:2004 Vapour vacuum pumps-Measurement of performance characteristics-Part 2:Measurement of critical backing pressure
KS B ISO 1607-2-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO 1608-2:2013 Vapour vacuum pumps-Measurement of performance characteristics-Part 2:Measurement of critical backing pressure
KS Q ISO 22514-5:2021 Statistical methods in process management —Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
KS Q ISO 11843-2-2009(2019) Capability of detection－Part 2：Methodology in the linear calibration case
KS I ISO 15970-2010(2016) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS Q ISO 11843-5:2012 Capability of detection-Part 5:Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5:2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2023 Detection Capabilities Part 5: Methodology in Linear and Nonlinear Calibration Vessels
KS B 6930-2003(2018) Low vacuum pumps－Measurement of performance characteristics
KS B 8201-2004 Test method of thermal performance for solar storage tanks
KS B 8200-2006 Test method of thermal performance for solar collectors
KS B 8201-1999 Test method of thermal performance for solar storage tanks
KS Q ISO 11843-1:2009 Capability of detection－Part 1：Terms and definitions
KS Q ISO 11843-1-2009(2019) Capability of detection－Part 1：Terms and definitions
KS Q ISO 11843-7:2013 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
KS B 6315-2002(2012) Vapour vacuum pumps－Measurement of performance characteristics
KS B 6315-1987 Vapour vacuum pumps－Measurement of performance characteristics
KS A ISO 9962-2:2019 Manually operated draughting machines — Part 2: Characteristics, performance, inspection and marking
KS Q ISO 22514-6-2016(2021) Statistical methods in process management — Capability and performance — Part 6: Process capability statistics for characteristics following a multivariate normal distribution
KS C IEC 61400-21-2013(2018) Wind turbines－Part 21：Measurement and assessment of power quality characteristics of grid connected wind turbines
KS B ISO 17559:2005 Hydraulic fluid power-Electrically controlled hydraulic pumps-Test methods to determine performance characteristics
KS B ISO 17559:2013 Hydraulic fluid power－Electrically controlled hydraulic pumps－Test methods to determine performance characteristics
KS B ISO 16001:2012 Earth-moving machinery－Hazard detection systems and visual aids－Performance requirements and tests
KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
KS A ISO 9962-2:2014 Manually operated draughting machines — Part 2: Characteristics, performance, inspection and marking
KS A ISO 9962-2:2002 Manually operated draughting machines-Part 2:Characteristics, performance, inspection and marking
KS Q ISO 11843-4-2009(2019) Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value
KS Q ISO 22514-4:2011
KS Q ISO 22514-4-2017(2022) Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
KS Q ISO 22514-4:2017 Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
KS M ISO 18415:2009 Cosmetics-Microbiology-Detection of specified and non-specified microorganisms
KS B ISO 18175:2005 Non-destructive testing－Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
KS I ISO 27407-2014(2019) Hydraulic fluid power — Marking of performance characteristics on hydraulic filters
KS B 0535-1995 Method for measurement ox perforemance characteristics of ultrasonic probes

KR-KS, Feature Detection Capabilities

KS Q ISO 11843-7-2019 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
KS Q ISO 22514-5-2021 Statistical methods in process management —Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
KS Q ISO 11843-5-2018(2023) Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
KS A ISO 9962-2-2019 Manually operated draughting machines — Part 2: Characteristics, performance, inspection and marking

Hebei Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB13/T 5410-2021 The technical ability of the personnel of special equipment inspection and testing institutions shall be maintained
DB13/T 5270-2020 Basic requirements for the capabilities of testing and inspection institutions for safety facilities in hazardous locations

RU-GOST R, Feature Detection Capabilities

GOST 21342.3-1987 Variable resistors. Test methods for resistance law
GOST R ISO 21747-2010 Statistical methods. Process performance and capability statistics for measured quality characteristics
GOST R ISO 11170-2010 Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics
GOST R 54107-2010 Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 2. Measurement of ultimate pressure
GOST R 57689-2017 Medicines for medical applications. Detection of toxicity to reproduction and male reproductivity
GOST 24683-1981 Electrotechnical products. Methods of controlling resistance to attack by special media
GOST 27247-1987 Earth-moving machinery. Method of test for the measurement of drawbar pull
GOST ISO 11843-4-2005 Statistical methods. Capability of detection. Methodology for comparing the minimum detectable value with a given value
GOST 28924-1991 Grinding materials. Test methods of physical and physical-mechanical properties
GOST R ISO 22514-5-2021 Statistical methods. Process management. Part 5. Process capability and performance estimation for attributive characteristics
GOST R 50779.44-2001 Statistical methods. Process capability characteristics. Basic methods for calculation
GOST R ISO 11843-5-2012 Statistical methods. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases

Association Francaise de Normalisation, Feature Detection Capabilities

NF EN 14702-2:2006 Caractérisation des boues - Propriétés de sédimentation - Partie 2 : détermination de l'aptitude à l'épaississement
NF ISO 11843-5:2008 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF X06-075-5*NF ISO 22514-5:2020 Statistical methods in process management - Capability and performance - Part 5 : process capability estimates and performance for attributive characteristics
NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
NF A09-336*NF EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
NF X06-048-5*NF ISO 11843-5:2008 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
NF C97-627:1993 Hearing aids - Part 7 : measurement of performance characteristics of hearing aids for quality inspection for delivery purposes.
NF A09-460*NF EN 1518:1998 Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors.
NF ISO 11843-1:1998 Capacité de détection - Partie 1 : termes et définitions
NF E48-670*NF ISO 11170:2013 Hydraulic fluid power - Sequence of tests for verifying performance characteristics of filter elements
NF EN ISO 15548-1:2014 Essais non destructifs - Appareillage pour examen par courants de Foucault - Partie 1 : caractéristiques de l'appareil et vérifications
NF X30-478*NF EN 15875:2011 Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste.
XP X30-491*XP CEN/TS 16660:2015 Characterisation of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity
NF EN ISO 29862:2019 Rubans auto-adhésifs - Détermination des caractéristiques du pouvoir adhésif linéaire
NF X06-048-4*NF ISO 11843-4:2004 Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value.
NF A09-162*NF EN ISO 20339:2017 Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and verification
NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1
NF EN 13477-2:2021 Essais non destructifs - Essais d'émission acoustique - Caractérisation de l'équipement - Partie 2 : vérifications des caractéristiques de fonctionnement
NF E48-383:1989 Hydraulic fluid power. Motors. Determination of performances characteristics at constant flow and constant torque.
NF EN 54-13/IN1:2019 Systèmes de détection incendie - Partie 13 : évaluation de la compatibilité et de l'aptitude au raccordement des composants d'un système
NF EN 54-13+A1:2019 Systèmes de détection incendie - Partie 13 : évaluation de la compatibilité et de l'aptitude au raccordement des composants d'un système
NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
NF EN ISO/IEC 17025:2017 Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais
NF EN IEC 61853-3:2018 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 3 : caractéristiques assignées d'énergie des modules PV

United States Navy, Feature Detection Capabilities

NAVY MIL-STD-2203 A-1994 ENERGY MONITORING AND CONTROL SYSTEMS, PERFORMANCE VERIFICATION AND ENDURANCE TESTS

Taiwan Provincial Standard of the People's Republic of China, Feature Detection Capabilities

CNS 6663-1980 Method of Test for Tensile Properties of Magnetic Tape
CNS 6135.7-2000 Hearing aids-Part7: Measurement of the performance Characteristics of hearing aids for quality inspection for delivery purposes
CNS 6135-7-2000 Hearing aids-Part7: Measurement of the performance Characteristics of hearing aids for quality inspection for delivery purposes

国家市场监督管理总局、中国国家标准化管理委员会, Feature Detection Capabilities

GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 40681.5-2021 Statistical methods in monitoring process capability and performance—Part 5:Process capability estimates and performance for attributive characteristics
GB/T 21486-2019 Hydraulic fluid power—Filter elements—Sequence of tests for verifying performance characteristics
GB/T 40681.4-2021 Statistical methods in monitoring process capability and performance—Part 4: Process capability estimates and performance measures
GB/T 40268-2021 Determination of performance on immunomagnetic material
GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
GB/T 37365-2019 Die casting unit—Performance testing method
GB/T 18451.2-2021 Wind turbines—Power performance measurements of electricity producing
GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories
GB/T 33260.2-2018 Capability of detection—Part 2: Methodology in the linear calibration case

Japanese Industrial Standards Committee (JISC), Feature Detection Capabilities

JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
JIS B 8316-2:1999 Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure
JIS B 8317-2:1999 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
JIS B 8356-1:2000 Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 1: Filter elements -- Procedure for verifying performance characteristics
JIS B 8356-1:2017 Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 1: Filter elements -- Procedure for verifying performance characteristics
JIS Z 2324-4:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 4: Method of testing for performance characteristics of eddy current inspection system
JIS Z 8462-5:2011 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
JIS Z 2355-2:2016 Non-destructive testing -- Ultrasonic thickness measurement -- Part 2: Method for evaluating performance characteristics of ultrasonic thickness measuring equipment
JIS B 8619:1999 Thermostatic refrigerant expansion valves -- Methods of testing for performance
JIS B 8356-6:2000 Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 6: Filter elements -- Verification of flow fatigue characteristics
JIS Q 17025:2005 General requirements for the competence of testing and calibration laboratories

European Committee for Standardization (CEN), Feature Detection Capabilities

PD CEN/TS 16660:2015 Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity
EN 13477-2:2010 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic
PD CEN/TS 15364:2006 Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test
EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification
EN 13860-2:2003 Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 2: Probe characteristics and verification
EN 13860-3:2003 Non-destructive testing Eddy current examination Equipment characteristics and verification Part 3: System characteristics and verification
EN 863:1995 Protective clothing - Mechanical properties - Test method: Puncture resistance
CEN/TS 16660:2015 Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity
EN 1986-2:2001 Electrically Propelled Road Vehicles - Measurment of Energy Performances - Part 2: Thermal Electric Hybrid Vehicles
EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)

Jiangsu Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB32/T 4510-2023 Technical regulations for dynamic characteristics and dynamic response detection of engineering structures
DB32/T 4194-2022 Specifications for the expression of inspection and testing capabilities for the qualification accreditation of inspection and testing institutions
DB32/T 4550-2023 Work procedures for proficiency verification of inspection and testing institutions

BR-ABNT, Feature Detection Capabilities

Shandong Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB37/T 5025-2014 Technical specification for dynamic performance testing of building structures

Group Standards of the People's Republic of China, Feature Detection Capabilities

T/CITS 0021-2023 New energy traction battery air impermeability inspection equipment
T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester
T/CEEIA 586-2022 Wind energy generation systems - integrated inspection, test and evaluation method of operation and grid connection performance
T/CDZX 002-2023 Service evaluation standard for food inspection agencies
T/GDAQI 118-2023 Operation capability specifications for software inspection body and laboratory
T/GDCKCJH 051-2021 Performance requirements and test method for bar code verifier
T/CEACI A0006-2023 The core physico-chemical testing capability requirement for analyzing & testing personnel of inspection industry
T/GDSM 001-2019 Testing Methods of Optical Characteristics for Flexible Display
T/SCMES 2-2019 Physical and chemical testing personnel training and ability evaluation
T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
T/GDCKCJH 056-2022 Technical performance and test method of high temperature ternary polymer lithium-ion power battery for special vehicle
T/CEC 301-2020 Code for inspection of safety performance of conduits for power cables
T/GDAQI 047-2020 GeneralrequirementsforperformancetestingofintelligentInternetofthings
T/CGCPU 007-2023 Evaluation criteria of biological analysis and detection ability
T/CIET 004-2022 Special ability assessment standards for engineering quality testing institutions
T/CGCPU 007-2019 Evaluation Standards for Biosample Analysis and Detection Ability
T/ZPP 008-2022 Technical specification for inspection of power energy efficiency monitoring system
T/CECS G：F50-01-2023 Standards for Inspection and Evaluation of Flood Resistance of Highway Bridges
T/GDJD 006-2020 Performance classification and testing method ofintelligent clothes airing machine
T/GDCKCJH 046-2021 Performance requirements and test method for helium mass spectrometer leak detector
T/CICE 01-2019 Professional competence evaluation of commercial vehicle inspection and maintenance
T/CITS 0014-2022 General specification of capability evaluation for electronic and electrical testing engineers
T/CICE01-2019 Standards for professional competence evaluation of commercial vehicle inspection and maintenance
T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/GDCKCJH 049-2021 Performance requirements and test methods for ultraviolet energy meter

未注明发布机构, Feature Detection Capabilities

BS ISO 21747:2006 Statistical methods — Process performance and capability statistics for measured quality characteristics
BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case
BS EN ISO/IEC 17025:2017(2018) General requirements for the competence of testing and calibration laboratories

国家质量监督检验检疫总局, Feature Detection Capabilities

SN/T 4610-2016 Requirements for building testing capacity of health and quarantine laboratories for entry-exit special items

Guangdong Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB44/T 1756-2015 General requirements for the capabilities of electric vehicle comprehensive performance testing stations
DB44/T 1210-2013 Detection and Evaluation Method of Energy Consumption in Thermal Power Plants

Professional Standard - Speciality, Feature Detection Capabilities

ZB Q14002.4-1988 Quality testing method of concrete components of farm buildings Mechanical performance testing method

ZA-SANS, Feature Detection Capabilities

SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
SANS 12710:2003 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
SANS 11843-5:2009 Capability of detection Part 5: Methodology in the linear and non-linear calibration cases
SANS 11843-1:2009 Capability of detection Part 1: Terms and definitions
SANS 22514-4:2008 Statistical methods in process management - Capability and performance Part 4: Process capability estimates and performance measures

Professional Standard - Aviation, Feature Detection Capabilities

HB 7476-1996 Qualification of metal mechanical performance testing personnel
HB 7476-2016 Qualification and Certification of Mechanics Testers for Aeronautical Metals

Association of German Mechanical Engineers, Feature Detection Capabilities

DVS 0923-1-1986 Testing of the welding characteristics of flux for submerged-arc welding; testing of the current-carrying capacity

Standard Association of Australia （SAA）, Feature Detection Capabilities

AS ISO 11843.1:2004 Capability of detection - Terms and definitions
AS ISO/IEC 17025:2005/Amdt 1:2006
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories

Lithuanian Standards Office , Feature Detection Capabilities

LST EN 14701-4-2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
LST EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012)
LST EN 14701-2-2006 Characterization of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration
LST EN 13068-1-2001 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties

AENOR, Feature Detection Capabilities

UNE-EN 14701-4:2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
UNE 56532:1977 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. HYGROSCOPICITY CAPACITY.
UNE-EN 14701-2:2013 Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration
UNE-EN 61400-21:2009 Wind turbines -- Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

国家市场监督管理总局, Feature Detection Capabilities

RB/T 055-2020 Competence Guidelines for Conformity Assessment Service Characteristics Assessment Laboratories
RB/T 042-2020 Electrical inspection and testing requirements for management and technical capability evaluation of inspection and testing institutions
RB/T 043-2020 Inspection and testing agency management and technical capability evaluation construction project inspection and testing requirements
RB/T 044-2020 Inspection and testing agency management and technical capability evaluation lightning protection device testing requirements
RB/T 064-2021 Inspection and testing agency management and technical capability evaluation building material testing requirements
RB/T 041-2020 Ecological environment monitoring requirements for management and technical capability evaluation of inspection and testing institutions

PL-PKN, Feature Detection Capabilities

PN BN 6110-22-1967
PN T04704-07-1992 Hearing aids. Measurement of the performance characteristics of hearing aids for quality inspection for delivery purposes
PN BN 6094-07-1966
PN BN 6110-17-1966
PN M44005-1985 Rotodynamic pumps easurement of characteristic arameters
PN BN 6140-06-1966
PN M73241-02-1992 Hydraulic fluid power Determination of characteristics of motors Startability
PN C04800-1974 Surface active agents Determination of the wetting power

CN-STDBOOK, Feature Detection Capabilities

图书 3-9208 General knowledge for testing capacity building

Professional Standard - Machinery, Feature Detection Capabilities

JB/T 10379-2002 General test methods for determining heat transfer performance and flow resistance of heat exchangers
JB/T 11780-2014 Non-destructive testing instrument.Characterization and verification of array eddy current testing instrument
JB/T 4744-2000 Mechanical property tests of product welded test coupons for steel pressure vessels
JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
JB/T 12562-2015 Low pressure die-casting machine.Testing methods of technology capability
JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 5577-2002 Overhead projectors-methods for measuring performance characteristics

Institute of Electrical and Electronics Engineers (IEEE), Feature Detection Capabilities

IEEE 1522-2004 Trial-use standard for testability and diagnosability characterisics and metrics

Hunan Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB43/T 2208-2021 General requirements for the capabilities of grain inspection and testing institutions

Shanghai Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB31/T 1364-2022 Technical specification for proficiency verification of inspection and testing institutions
DB31/T 1401-2023

工业和信息化部, Feature Detection Capabilities

JB/T 10379-2022 General test method for thermal performance and fluid resistance characteristics of heat exchangers
YD/T 3490-2019 SDN network security capability testing requirements

Indonesia Standards, Feature Detection Capabilities

SNI 13-6980-2003 Cementing float equipment - Performance testing
SNI 05-4986-1999 Performance test method of skiving machines
SNI IEC 61400-21:2016 Turbin angin - Bagian 21: Pengukuran dan penilaian karakteristik kualitas daya dari turbin angin yang terkoneksi grid
SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories
SNI ISO/TS 11774:2013 Non-destructive testing - Performance based qualification
SNI 15-1572-1989 Detergen resistance of glaze, Test method

IN-BIS, Feature Detection Capabilities

IS 6849 Pt.3-1976

American Society for Testing and Materials (ASTM), Feature Detection Capabilities

ASTM F1470-01 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-02 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-09 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-12 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM E2491-23 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM E2491-08 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM D7036-04 Standard Practice for Competence of Air Emission Testing Bodies
ASTM D4473-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4473-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4473-03 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4473-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4473-08(2016) Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM E2281-15(2020) Standard Practice for Process Capability and Performance Measurement
ASTM E2281-08 Standard Practice for Process and Measurement Capability Indices
ASTM E1359-12 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM D1456-86(2005) Standard Test Method for Rubber Property8212;Elongation at Specific Stress
ASTM D1456-86(2001) Standard Test Method for Rubber Property8212;Elongation at Specific Stress
ASTM D1456-86(1996) Standard Test Method for Rubber Property8212;Elongation at Specific Stress
ASTM D2711-01a(2007)e1 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D2711-01a Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D2711-01 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D2711-99 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

Heilongjiang Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB23/T 3598-2023 Hemp Inspection and Testing Laboratory Personnel Competency Requirements

IX-SA, Feature Detection Capabilities

AS 502:1972

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Feature Detection Capabilities

GB/T 17993-2017 General requirements for the competence of automotive multiple-function inspection agency
GB/T 35394-2017 Non-destructive testing—X-ray digital radiography—System properties
GB/T 34015-2017 Recycling of traction battery used in electric vehicle—Test of residual capacity

Professional Standard - Certification and Accreditation, Feature Detection Capabilities

RB/T 214-2017 Competence assessment for inspection body and laboratory mandatory approval.Genaral requirements for inspection body and laboratory

CZ-CSN, Feature Detection Capabilities

CSN 72 2605 Z1-1996
CSN 36 1318-1985 Grils. Measurment of the performance characteristics
CSN 72 2605-1978 Testing of brick products. Determination of mechanical properties
CSN 36 1165-1985 Polishers. Measurement of the performance characteristics.
CSN 64 5432-1977 Testing of cellular materials. Determination of tensile properties
CSN 36 1185-1984 Kitchen machines. Measurement of the performance characteristics.
CSN 36 1313-1985 Ranges and ovens Measurment of the performance characteristics
CSN 36 1333-1984 Electrical appliances for heating liquids. Measurement of the peiformance characteristics

IT-UNI, Feature Detection Capabilities

ES-AENOR, Feature Detection Capabilities

Military Standard of the People's Republic of China-General Armament Department, Feature Detection Capabilities

GJB/Z 84-1996 Thermodynamic calculation method of propellant energy characteristics
GJB 9828-2020 Specifications for test instruments for pilots' ability to withstand stress and hypoxia
GJB 624.6-1988 Military aircraft scientific research flight test training requirements power plant performance characteristics

SE-SIS, Feature Detection Capabilities

SIS SS-ISO 1607-2:1991 Positive-displacement vacuum pumps — Measurement of performance characteris- tics — Part 2: Measurement of ultimate pressure
SIS SS IEC 737:1984 Nuclear instrumentation — In-core temperature or primary envelope temperature measurements in nuclear power reactors — Characteristics and test methods

Professional Standard-Safe Production, Feature Detection Capabilities

AQ 8006-2010 General requirements for the competence of work safety testing and inspecting organizations
AQ/T 8006-2018 General requirements for the capabilities of safety production testing and inspection institutions
AQ 5215-2013 Safety performance testing method for spray booth
AQ/T 5215-2013 Testing method for safety performance of spray booth

Professional Standard - Traffic, Feature Detection Capabilities

JT/T 649-2006 Multi-function automobile brake tester
JTG/T J21-2011 Specification for Inspection and Evaluation of Load-bearing Capacity of Highway Bridges

National Metrological Verification Regulations of the People's Republic of China, Feature Detection Capabilities

JJG(交通) 060-2005 Multi-function Automobile Brake Tester

American National Standards Institute （ANSI), Feature Detection Capabilities

ANSI N13.32-2008 Performance Testing of Extremity Dosimeters
ANSI/ISA 12.13.01-2002 Performance Requirements, Combustible Gas Detectors
ANSI/ISA 12.13.01-2002*IEC 61779-1 Performance Requirements, Combustible Gas Detectors
ANSI/ASTM/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI S3.46-1997 Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids

U.S. Military Regulations and Norms, Feature Detection Capabilities

ARMY MIL-HDBK-204 A NOTICE 1-2013 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-204A-1990 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS

Gansu Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB62/T 4160-2020 On-line detection method for comprehensive performance of in-use vacuum adiabatic cryogenic pressure vessel

Professional Standard - Electricity, Feature Detection Capabilities

DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations
DL/T 1758-2017 Technical Specifications for Mobile Power Energy Efficiency Detection System

中国国家认证认可监督管理委员会, Feature Detection Capabilities

RB/T 215-2017 Inspection and testing agency qualification accreditation capability evaluation food inspection agency requirements
RB/T 216-2017 Inspection and testing agency qualification accreditation capability evaluation food re-inspection agency requirements
RB/T 218-2017 Inspection and testing agency qualification accreditation capability evaluation requirements for motor vehicle inspection agencies

ES-UNE, Feature Detection Capabilities

UNE-EN ISO 20339:2018 Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and verification (ISO 20339:2017)
UNE-EN 13477-2:2022 Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics

Anhui Provincial Standard of the People's Republic of China, Feature Detection Capabilities

DB34/T 982-2017 Code for supervision and inspection of safety performance of simple pressure vessels

Professional Standard - Non-ferrous Metal, Feature Detection Capabilities

YS 5222-2000 Specification for subsoil dynamic property test of dynamic machine foundation
YS 5222-2000(条文说明) Test procedure for dynamic characteristics of foundation of power machinery

API - American Petroleum Institute, Feature Detection Capabilities

API TR 1149-2015 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (SECOND EDITION)
API PUBL 1149-1993 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (First Edition)

TH-TISI, Feature Detection Capabilities

TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories

CH-SNV, Feature Detection Capabilities

SN 058 253-1979

American Society of Quality Control （ASQC), Feature Detection Capabilities

ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E

GOSTR, Feature Detection Capabilities

GOST ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories

National Metrological Technical Specifications of the People's Republic of China, Feature Detection Capabilities

JJF 1261.20-2017 Power Transformer Energy Efficiency Measurement and Inspection Rules
JJF 1261.20-2015 Power Transformer Energy Efficiency Measurement and Inspection Rules

RO-ASRO, Feature Detection Capabilities

STAS 3519-1976 TESTS ON CONCRETES Inspection of waterproofness

Professional Standard - Meteorology, Feature Detection Capabilities

QX/T 92-2008 Test specification of calibration equipment for humidity instrument

GM Europe, Feature Detection Capabilities

GME GMI 60246-2007 Determination of the Compressibility of a Cellular Elastomer under a Specified Force (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14293.)

Professional Standard - Energy, Feature Detection Capabilities

NB/T 47016-2011 Mechanical property tests of product welded test coupons for pressure equipments

NZ-SNZ, Feature Detection Capabilities

NZS/BS 3601-1987 Carbon Steel Pipes and Tubes with Specified Room Temperature Properties for Pressure Purposes