ZH
RU
ES

Bulk Density Test Basis

Bulk Density Test Basis, Total:293 items.

In the international standard classification, Bulk Density Test Basis involves: Fertilizers, Cutting tools, Powder metallurgy, Products of the chemical industry, Construction materials, Fuels, Nuclear energy engineering, Refractories, Soil quality. Pedology, Inorganic chemicals, Milk and milk products, Air quality, Metalliferous minerals, Paint ingredients, Paper and board, Paper products, Measurement of volume, mass, density, viscosity, Ceramics, Tea. Coffee. Cocoa, Plastics, Cereals, pulses and derived products, Coals, Pesticides and other agrochemicals, Waxes, bituminous materials and other petroleum products, Road vehicles in general, Road engineering, Rubber and plastics products, Mining and quarrying, Magnetic materials, Particle size analysis. Sieving, Electricity. Magnetism. Electrical and magnetic measurements, Paints and varnishes, Aids for disabled or handicapped persons.

VN-TCVN, Bulk Density Test Basis

• TCVN 4778-2009 Coal.Determination of bulk density
• TCVN 4778-2015 Coal - Determination of bulk density for the use in charging of coke ovens
• TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
• TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities

Danish Standards Foundation, Bulk Density Test Basis

• DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
• DS/EN ISO 7837:2000 Fertilizeres - Determination of bulk density (loose) of fine-grained fertilizers
• DS/EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
• DS/EN 1015-6/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
• DS/EN 1015-6:1999 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
• DS/EN 1015-10/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
• DS/EN 1015-10:2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
• DS/EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
• DS/EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method
• DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
• DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
• DS/EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
• DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
• DS/EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
• DS/EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
• DS/EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens

National Metrological Verification Regulations of the People's Republic of China, Bulk Density Test Basis

• JJG(机械) 3-1990 Verification Regulations for Abrasive Bulk Density Meter

AENOR, Bulk Density Test Basis

• UNE 32205:1984 COKE. DETERMINATION OF BULK DENSITY.
• UNE-EN 1236:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE).
• UNE-EN 1237:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (TAPPED).
• UNE-EN ISO 7837:2001 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE) OF FINE-GRAINED FERTILIZERS. (ISO 7837:1992)
• UNE 53137:1977 PLASTICS. PVC RESINS. DETERMINATION OF THE COMPACTED APPARENT BULK DENSITY
• UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
• UNE-EN 1015-6:1999 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR
• UNE-EN 1015-6:1999/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
• UNE-EN 1015-10:2000/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
• UNE-EN 1097-3:1999 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS.
• UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
• UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
• UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
• UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
• UNE-EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
• UNE-EN ISO 10545-3:1997 CERAMIC TILES. PART 3: DETERMINATION OF WATER ABSORPTION, APPARENT POROSITY, APPARENT RELATIVE DENSITY AND BULK DENSITY. (ISO 10545-3:1995), INCLUDING TECHNICAL CORRIGENDUM 1:1997).
• UNE-EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens

Lithuanian Standards Office , Bulk Density Test Basis

• LST EN 1237-2002 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
• LST ISO 6782:1995 Aggregates for concrete. Determination of bulk density
• LST EN ISO 12625-3:2005 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005)
• LST EN 1236-2002 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
• LST EN 725-9-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
• LST ISO 8967:2006 Dried milk and dried milk products - Determination of bulk density (identical ISO 8967:2005)
• LST EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992)
• LST EN 1015-6-2002 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
• LST EN 1015-6-2002/A1-2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
• LST EN 1015-10-2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
• LST EN 1015-10-2002/A1-2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
• LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
• LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
• LST EN 725-8-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
• LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
• LST EN 1097-3-2002 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
• LST EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
• LST EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
• LST EN 12697-6-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
• LST EN 60404-13-2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip (IEC 60404-13:1995)

CZ-CSN, Bulk Density Test Basis

• CSN 44 1367-1963 Determination of the bulk density of coke

International Organization for Standardization (ISO), Bulk Density Test Basis

• ISO 9136:1989 Abrasive macrograins; determination of bulk density
• ISO 5311:1983 Fertilizers — Determination of bulk density (tapped)
• ISO 6782:1982 Aggregates for concrete; Determination of bulk density
• ISO/CD 18708:2023 Solid recovered fuels — Determination of bulk density
• ISO 9161:2004 Uranium dioxide powder - Determination of apparent density and tap density
• ISO 8967:2005 | IDF 134:2005 Dried milk and dried milk products — Determination of bulk density
• ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
• ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2: Microgrits
• ISO 7971-3:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method
• ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
• ISO 7971-2:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

YU-JUS, Bulk Density Test Basis

• JUS U.M1.009-1993 Concrete - Determination of bulk density of concrete
• JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content

Standard Association of Australia （SAA）, Bulk Density Test Basis

• AS 2879.8:2000(R2013)
• AS 1141.4:1996 Methods for sampling and testing aggregates Method 4: Bulk density of aggregate
• AS 1141.4:2000(R2013)
• AS ISO 10545.3:2020 Ceramic tiles, Method 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
• AS/NZS 2891.9.3:2014
• AS/NZS 2891.9.2:2014
• AS/NZS 2891.9.1:2014
• AS 1774.2:2001(R2013)
• AS 2300.4.3:1994 Methods of chemical and physical testing for the dairying industry - Dried milk and dried milk products - Determination of bulk density of dried milk
• AS 1774.5:2014 Refractories and refractory materials — Physical test methods, Method 5: Determination of bulk density, apparent porosity and true porosity (ISO 5017:2013, MOD)

Association Francaise de Normalisation, Bulk Density Test Basis

• NF ISO 3852:1989 Minerais de fer - Détermination de la masse volumique apparente
• NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
• NF EN ISO 10545-3:2018 Carreaux et dalles céramiques - Partie 3 : détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale
• NF EN ISO 17828:2016 Biocombustibles solides - Détermination de la masse volumique apparente
• NF EN ISO 9161:2021 Poudre de dioxyde d'uranium - Détermination de la masse volumique apparente et de la masse volumique après tassement
• NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
• NF EN ISO 845:2009 Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente
• NF EN 15761:2010 Supports de culture préformés - Détermination de la longueur, de la largeur, de la hauteur, du volume et de la masse volumique apparente
• NF EN ISO 29470:2020 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
• NF EN 1602:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
• NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
• NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
• NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
• NF ISO 15100:2001 Plastiques - Fibres de renfort - Fils coupés - Détermination de la masse volumique apparente
• NF EN ISO 23145-1:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 1 : masse volumique après tassement
• NF EN ISO 23145-2:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 2 : Masse volumique sans tassement
• NF EN ISO 3923-1:2018 Poudres métalliques - Détermination de la masse volumique apparente - Partie 1 : méthode de l'entonnoir
• NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
• NF ISO 5017:2013 Produits réfractaires façonnés denses - Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
• NF EN ISO 61:1999 Matières plastiques - Détermination de la masse volumique apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné
• NF EN 14617-1:2013 Pierre agglomérée - Méthodes d'essai - Partie 1 : détermination de la masse volumique apparente et du coefficient d'absorption d'eau
• NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
• NF B42-009:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 9 : determination of untamped bulk density.
• NF EN 993-1:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 1 : détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
• NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
• NF EN 12697-7:2022 Mélanges bitumineux - Méthodes d'essai - Partie 7 : détermination de la masse volumique apparente des éprouvettes bitumineuses par les rayons gamma
• NF EN 1097-3:1998 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 3 : méthode pour la détermination de la masse volumique en vrac et de la porosité intergranulaire
• NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet

IN-BIS, Bulk Density Test Basis

• IS 7190-1974
• IS 13858-1993 Instant tea - determination of free-flow and compacted bulk densities
• IS 7032 Pt.6-1986
• IS 1528 Pt.12-1974
• IS 7032 Pt.6-1975
• IS 1448 Pt.130-1988
• IS 5842-1970
• IS 5843-1970

Japanese Industrial Standards Committee (JISC), Bulk Density Test Basis

• JIS Z 2512:2006 Metallic powders -- Determination of tap density
• JIS R 6130:2002 Testing method for bulk density of artificial abrasives

未注明发布机构, Bulk Density Test Basis

• BS EN 1236:1995(2010) Fertilizers — Determination of bulk density (loose)
• BS EN 1237:1995(2010) Fertilizers — Determination of bulk density (tapped)
• BS ISO 8967:2005(2006) Dried milk and dried milk products — Determination of bulk density
• BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers
• BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
• DIN EN 384:2004 Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density
• BS ISO 3852:2007(2008) Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
• BS 3482-10:1991(1999) Methods of test for Desiccants — Part 10 : Determination of bulk density (dry basis)
• DIN EN 12390-7:2019 Testing of hardened concrete – Part 7: Bulk density of hardened concrete
• BS EN 1094-4:1995(1999) Insulating refractory products — Part 4 : Determination of bulk density and true porosity
• BS 1902-3.17:1990(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.17 Determination of volume and bulk density of dense shaped products (methods 1902 - 317)
• DIN EN ISO 7971-3:2019 Cereals – Determination of bulk density, so-called mass per hectoliter – Part 3: Routine procedures (ISO 7971-3:2019)
• BS 6404-13:1996(1999) Magnetic materials — Part 13 : Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip

Professional Standard - Chemical Industry, Bulk Density Test Basis

• HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts

British Standards Institution (BSI), Bulk Density Test Basis

• BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
• DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density
• BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
• BS ISO 8967:2005 Dried milk and dried milk products. Determination of bulk density
• BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
• BS ISO 1013:2020 Coke. Determination of bulk density in a large container
• DD CEN/TS 15401:2006 Solid recovered fuels — Methods for the determination of bulk density
• 21/30397451 DC BS ISO 567. Coke. Determination of bulk density in a small container
• BS EN ISO 11272:2017 Tracked Changes. Soil quality. Determination of dry bulk density
• 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
• BS ISO 567:2021 Tracked Changes. Coke. Determination of bulk density in a small container
• BS ISO 15100:2000 Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
• BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
• BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
• BS EN ISO 10545-3:2018 Tracked Changes. Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
• BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
• BS EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
• 21/30436585 DC BS EN 15761. Pre-shaped growing media. Determination of the dimensions measured and bulk density
• BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
• BS EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders - Untapped density
• BS EN ISO 7971-3:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Routine method
• BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
• 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
• BS EN 12697-7:2022 Tracked Changes. Bituminous mixtures. Test methods. Determination of the bulk density of bituminous specimens by gamma rays
• 18/30382725 DC BS EN 12697-6. Bituminous mixtures. Test methods. Part 6. Determination of bulk density of bituminous specimens
• BS 5752-11:1987 Methods of test for coffee and coffee products. Instant coffee: determination of free-flow and compacted bulk densities
• BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
• BS EN IEC 60404-13:2018 Tracked Changes. Magnetic materials. Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
• BS 1902 Sec.3.17:1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
• BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
• 20/30426156 DC BS EN 12697-7. Bituminous mixtures. Test methods. Part 7. Determination of the bulk density of bituminous specimens by gamma rays
• BS 5752-16:1996 Methods of test for coffee and coffee products. Green and roasted coffee. Determination of free-flow bulk density of whole beans (routine method)
• BS EN ISO 7971-2:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
• BS ISO 17190-9:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of flow rate and bulk density

German Institute for Standardization, Bulk Density Test Basis

• DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
• DIN EN ISO 17828:2016-05 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
• DIN CEN/TS 15401:2010-09*DIN SPEC 1122:2010-09 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
• DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density; German version EN 15761:2009 / Note: To be replaced by DIN EN 15761 (2022-01).
• DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
• DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
• DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
• DIN EN 1237:1995-08 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995
• DIN EN 1236:1995-08 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995
• DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
• DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
• DIN EN ISO 7837:2000-06 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
• DIN ISO 9136-2:2000-07 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
• DIN EN 15761:2022-01 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021 / Note: Date of issue 2021-12-10*Intended as replacement for DIN EN 15761 (2010-04).
• DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
• DIN EN ISO 10545-3:2018-06 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018); German version EN ISO 10545-3:2018
• DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
• DIN EN ISO 12625-3:2014-09 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014
• DIN EN 12697-6:2020 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
• DIN EN 12697-6:2020-05 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2020
• DIN EN ISO 7971-3:2020-02 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019); German version EN ISO 7971-3:2019
• DIN EN ISO 17892-2:2015-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
• DIN 52170-1:2023-02 Determination of composition of hardened concrete - Part 1: General, terms, sampling and dry-bulk density
• DIN EN 1094-4:1995-09 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995
• DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
• DIN EN 1097-3:1998-06 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
• DIN EN 772-4:1998-10 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
• DIN EN ISO 23145-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007); German version EN ISO 23145-1:2016
• DIN EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
• DIN EN ISO 23145-2:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012); German version EN ISO 23145-2:2016
• DIN EN IEC 60404-13:2020-06 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018); German version EN IEC 60404-13:2018 / Note: DIN EN 60404-13 (2008-05) remains valid alongside this...
• DIN EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
• DIN EN 12697-7:2020 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German and English version prEN 12697-7:2020
• DIN EN 12697-7:2022-04 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2022
• DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
• DIN EN 993-1:2019-03 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:2018
• DIN EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
• DIN EN ISO 7971-2:2019-06 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019); German version EN ISO 7971-2:2019

HU-MSZT, Bulk Density Test Basis

• MSZ 7779-1971

RU-GOST R, Bulk Density Test Basis

• GOST R 55450-2013 Organic fertilizers. Method for determination of bulk density
• GOST ISO 8460-2015 IInstant coffee. Determination of free-flow and compacted bulk densities
• GOST ISO 7971-3-2021 Cereals. Determination of bulk density, called mass per hectolitre. Part 3. Routine method
• GOST ISO 7971-3-2013 Determination of bulk density, called mass per hektolitre. Part 3. Routine method
• PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density

European Committee for Standardization (CEN), Bulk Density Test Basis

• CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
• EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)
• EN 1237:1995 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
• EN 20534:1993 Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density (ISO 534 : 1988)
• EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
• prEN ISO 23145-1 rev Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007)
• FprEN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
• EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids

Korean Agency for Technology and Standards (KATS), Bulk Density Test Basis

• KS A ISO 9161:2009 Uranium dioxide powder-Determination of apparent density and tap density
• KS E ISO 567-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
• KS L ISO 5017-2013(2018) Dense shaped refractory products?Determination of bulk density, apparent porosity and true porosity
• KS C IEC 60404-13-2002(2022) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
• KS C IEC 60404-13-2002(2017) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
• KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
• KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bulk Density Test Basis

• GB/T 23771-2009 Determination of bulk density for inorganic chemical products
• GB/T 16913.3-1997 Methods of dust character test--Part 3: Determination of bulk density--Natural bulk method
• GB/T 21877-2015 Dyestuffs and intermediate of dyes.Determination of tapping density
• GB/T 21877-2008 Dyestuffs and intermediate of dyes.Determination of tapping density
• GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
• GB/T 20316.2-2006 Abrasive grains. Determination of bulk density. Part 2: Microgrits
• GB/T 20316.1-2009 Abrasive grains.Determiantaion of bulk density.Part 1:Macrogrits
• GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities

Professional Standard - Machinery, Bulk Density Test Basis

• JB/T 7984.2-1999 Conventional abrasive.Determination of bulk density of macrogrits

International Dairy Federation (IDF), Bulk Density Test Basis

• IDF 134-2005 Dried milk and dried milk products - Determination of bulk density

GOSTR, Bulk Density Test Basis

• GOST 34260-2017 Glass fiber. Chopped strands. Determination of bulk density
• GOST R 58401.10-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determining of bulk density
• GOST R 58402.5-2019 Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Volumetric-functional design system. Method for determination of bulk density and emptiness of coarse aggregate after compaction

Group Standards of the People's Republic of China, Bulk Density Test Basis

• T/CISA 099-2021 Determination of apparent density,bulk density and porosity for iron tailings

CEN - European Committee for Standardization, Bulk Density Test Basis

• PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
• PD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
• PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens

CH-SNV, Bulk Density Test Basis

• SEV 1003-1959

ES-UNE, Bulk Density Test Basis

• UNE-EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015)
• UNE-EN ISO 10545-3:2018 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
• UNE-EN 12697-6:2022 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
• UNE-EN ISO 7971-3:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019)
• UNE-EN ISO 17892-2:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
• UNE-EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) (Endorsed by AENOR in June of 2016.)
• UNE-EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) (Endorsed by AENOR in June of 2016.)
• UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
• UNE-EN 772-4:1999 METHODS OF TEST FOR MASONRY UNITS - PART 4: DETERMINATION OF REAL AND BULK DENSITY AND OF TOTAL AND OPEN POROSITY FOR NATURAL STONE MASONRY UNITS
• UNE-EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
• UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)

American Society for Testing and Materials (ASTM), Bulk Density Test Basis

• ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
• ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
• ASTM D5057-90(1996) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
• ASTM D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
• ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
• ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
• ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
• ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
• ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
• ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
• ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
• ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
• ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
• ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
• ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
• ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
• ASTM D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
• ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
• ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
• ASTM C830-00(2023) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
• ASTM D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

Professional Standard - Commodity Inspection, Bulk Density Test Basis

• SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density

RO-ASRO, Bulk Density Test Basis

• STAS 5875-1980 PLASTICS Determination of bulk density of moulding mixtures that can be poured from a funnel

The American Road & Transportation Builders Association, Bulk Density Test Basis

• AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
• AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, Bulk Density Test Basis

• T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
• T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
• T19/T19M-2000 "Standard Method of Test for Bulk Density (""Unit Weight"") and Voids in Aggregate (Twentieth Edition; ASTM C29/C29M-97)"

AT-ON, Bulk Density Test Basis

• OENORM EN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

Professional Standard - Non-ferrous Metal, Bulk Density Test Basis

• YS/T 587.10-2006 Calcined coke for prebaked blocks. Testing methods. Part 10: Determination of bulk density (tapped)

CENELEC - European Committee for Electrotechnical Standardization, Bulk Density Test Basis

• EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet

Others:   Bulk Density Test Basis, Detection of Bulk Density.