ZH
RU
ES

Orthogonal test

Orthogonal test, Total:497 items.

In the international standard classification, Orthogonal test involves: Paints and varnishes, Environmental testing, MANUFACTURING ENGINEERING, Fasteners for aerospace construction, Electrical accessories, Test conditions and procedures in general, Electrical engineering in general, Quality, Electrical and electronic testing, Vibrations, shock and vibration measurements, Electronic components in general, Protection against fire, Freight distribution of goods, Metrology and measurement in general, Transformers. Reactors, Corrosion of metals, Insulating materials, Electromechanical components for electronic and telecommunications equipment, Testing of metals, Magnetic materials, Elements of buildings, Road vehicles in general, Dentistry, Organic chemicals, Paper and board, Welding, brazing and soldering, Electrical wires and cables, Telecommunication terminal equipment, Rubber, Construction materials, Road engineering, Insulation, Products of the textile industry, Mechanical testing, Power stations in general, Fluid power systems, Pumps, Shipbuilding and marine structures in general, Railway rolling stock, Reinforced plastics, Soil quality. Pedology, Electronic tubes, Installations in buildings, Rotating machinery, Aerospace electric equipment and systems, Telecontrol. Telemetering, Aids for disabled or handicapped persons, Packaging and distribution of goods in general, Products of the chemical industry, Transport, Applications of information technology, Road vehicle systems, Materials and components for railway engineering, Bearings, Radiocommunications, Lamps and related equipment, Lifting equipment, Aerospace fluid systems and components, Equipment for the rubber and plastics industries, Fibre optic communications, Commercial vehicles, Construction of railways, Medical equipment, Passenger cars. Caravans and light trailers, Electricity. Magnetism. Electrical and magnetic measurements, Interface and interconnection equipment, Power transmission and distribution networks, Software development and system documentation, Switchgear and controlgear, Ventilators. Fans. Air-conditioners, Acoustics and acoustic measurements, Fuels, Microbiology, Gas and steam turbines. Steam engines, Particle size analysis. Sieving, Iron and steel products, Protection against dangerous goods, Protective equipment, Thermodynamics and temperature measurements, Veterinary medicine, Textile machinery, Standardization. General rules, Internal combustion engines, Internal combustion engines for road vehicles, Materials for aerospace construction, Vocabularies.

Professional Standard - Agriculture, Orthogonal test

9 OIE陆生动物诊断试验和疫苗手册-2005 Pig brucellosis enzyme-linked immunosorbent assay (designated test for international trade)
14 OIE陆生动物诊断试验和疫苗手册-2005 Chicken infectious laryngotracheitis 2. Item d in serological test: enzyme-linked immunosorbent assay
5 OIE陆生动物诊断试验和疫苗手册-2005 Endemic bovine leukemia enzyme-linked immunosorbent assay (ELISA) (designated test for international trade)
12 OIE陆生动物诊断试验和疫苗手册-2005 Avian mycoplasma disease (Mycoplasma gallisepticum) 2. Serological test item c: enzyme-linked immunosorbent assay (ELISA)
3 OIE陆生动物诊断试验和疫苗手册-2005 Bovine brucellosis enzyme-linked immunosorbent assay (international trade designated test) indirect ELISA competition ELISA
2 OIE陆生动物诊断试验和疫苗手册-2005 Foot-and-mouth disease non-structural protein antibody test
17 OIE陆生动物诊断试验和疫苗手册-2005 Rabies item I: fluorescent antibody test (FAT)
1 OIE陆生动物诊断试验和疫苗手册-2005 Foot and Mouth Disease Enzyme-Linked Immunosorbent Assay (ELISA)
8 OIE陆生动物诊断试验和疫苗手册-2005 Goat and Sheep Brucellosis Item B 2nd Serological Test Enzyme-Linked Immunosorbent Assay: Indirect ELISA Competitive ELISA
16 OIE陆生动物诊断试验和疫苗手册-2005 Swine Influenza B 2: ELISA
4 OIE陆生动物诊断试验和疫苗手册-2005 r-interferon test for bovine tuberculosis hematological examination
13 OIE陆生动物诊断试验和疫苗手册-2005 Enzyme-linked immunosorbent assay for chicken infectious bronchitis
第3．1章OIE陆生动物诊断试验和疫苗手册-第七版 General guidelines - Laboratory methods for bacterial susceptibility testing
第1．1．5章OIE陆生动物诊断试验和疫苗手册-第七版 General Standard-Introduction-Principles and Methods of Validation of Diagnostic Tests for Infectious Diseases

European Committee for Standardization (CEN), Orthogonal test

EN ISO 2409:2020 Paints and varnishes - Cross-cut test (ISO 2409:2020)
EN ISO 2409:1994 Paints and varnishes - Cross-cut test ISO 2409: 1992
EN ISO 2409:2013 Paints and varnishes - Cross-cut test
EN 283:1991 Swap Bodies - Testing
prEN 60068-2-59-1992 Basic environmental testing; part 2: tests; test Fe: vibration, sine beat method (IEC 68-2-59:1990)
HD 323.2.52 S1-1987 Basic environmental testing procedures; part 2: tests; test Kb: salt mist, cyclic (sodium chloride solution)
EN ISO 7500-1:1999 Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines ISO 7500-1:1999
EN ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force- measuring system (ISO 7500-1:2015)

CEN - European Committee for Standardization, Orthogonal test

EN ISO 2409:2007 Paints and varnishes - Cross-cut test

British Standards Institution (BSI), Orthogonal test

BS EN 60068-2-6:2008 Environmental testing — Part 2-6: Tests — Test Fc: Vibration (sinusoidal)
BS EN 60068-2-59:1993 Environmental testing - Test methods - Test Fe and guidance - Vibration (sine-beat method)
BS EN 60068-2-57:2013 Environmental testing. Tests. Test Ff: Vibration. Time-history and sine-beat method
BS EN 283:1991 Swap bodies - Testing
BS EN 60068-2-50:2000 Environmental testing - Test methods - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
BS EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Dynamic stress tests - Test 6d - Vibration (sinusoidal)
BS EN 60068-2-51:2000 Environmental testing - Test methods - Tests - Tests Z/BFc - Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS EN 60068-2-6:1996 Environmental testing - Test methods - Test Fc - Vibration (sinusoidal)
BS 2011 Pt.2.2Z/AFc & Z/BFc:1986 Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
BS EN ISO 527-4:1997 Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN 14363:2005 Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests
BS EN 14363:2006 Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests
BS EN 62052-31:2016 Electricity metering equipment (AC). General requirements, tests and test conditions. Product safety requirements and tests
BS EN 60811-403:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Ozone resistance test on cross-linked compounds
BS EN 60068-2-75:2014 Environmental testing. Tests. Test Eh: Hammer tests
BS 7825-3.1:1997 Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties
BS EN 61300-2-1:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Vibration (sinusoidal)
BS EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Vibration (sinusoidal)
BS EN 61300-2-1:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Vibration (sinusoidal)
BS ISO 18375:2016 Heavy commercial vehicles and buses. Test method for yaw stability. Sine with dwell test
BS EN 13146-8:2012 Railway applications. Track. Test methods for fastening systems. In service testing
BS EN 13146-8:2002 Railway applications - Track - Test methods for fastening systems - In service testing
BS 2011-2.1T:1981 Environmental testing - Tests - Test T. Soldering
BS EN 60068-2-74:2000 Environmental testing - Test methods - Test Xc: Fluid contamination
BS EN ISO 2409:1995 Paints and varnishes - Cross-cut test
BS EN 60068-2-38:1999 Environmental testing - Test methods - Tests - Test Z/AD: composite temperature/humidity cyclic test
BS EN 60068-2-38:2009 Environmental testing - Tests - Test Z/AD - Composite temperature/humidity cyclic test
BS EN 60068-2-38:2010 Environmental testing. Tests. Test Z/AD. Composite temperature/humidity cyclic test
BS ISO 19365:2016 Passenger cars. Validation of vehicle dynamic simulation. Sine with dwell stability control testing
BS EN 13146-10:2017 Railway applications. Track. Test methods for fastening systems. Proof load test for pull-out resistance
BS EN 60068-2-52:1996 Environmental testing - Test methods - Tests - Test Kb - Salt mist cyclic (sodium chloride solution)
BS EN 60068-2-67:1996 Environmental testing - Test methods - Test Cy - Damp heat, steady state, accelerated test primarily intended for components
BS 7826-1:1995 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
BS IEC 60493-1:2011 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
BS EN 60068-2-10:2005 Environmental testing - Tests - Test J and guidance: Mould growth

Professional Standard - Machinery, Orthogonal test

JB/T 7510-1994 Technological parameter optimization method Orthogonal test method
JB/T 9444.9-1999 Basic environmental testing method of copying machines - Test F: Vibration (sine) test
JB/T 9444.5-1999 Basic environmental testing method of copying machines - Test D: Cyclic damp heat test
JB/T 7608-1994 Test method and limit value of dielectric loss tangent of high voltage AC motor coil
JB/T 7608-2006 Test method for measuring loss tangent of high voltage alternating current dynamo coil and limit value
JB/T 7079-1993 Spring Driven Shock Tester and Its Calibration
JB/T 12043.2-2015 Hydraulic timing advance plunger for diesel engine.Part 2: Test method

Electronic Components, Assemblies and Materials Association, Orthogonal test

ECA EIA-364-04A-2002 TP-04A Normal Force Test Procedure for Electrical Connectors

American National Standards Institute （ANSI), Orthogonal test

ANSI/EIA 364-04A:2001 TP-04, Normal Force Test Procedure for Electrical Connectors
ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements
ANSI/ASTM B810:2001 Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ANSI/ASTM E994:1996 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition
ANSI/SCTE 16-2012 Test Procedure for Hum Modulation
ANSI/IEEE 1445:1998 Standard for Digital Test Interchange Format (DTIF)
ANSI/UL 10Ca-2009 Standard for Safety for Positive Pressure Fire Tests of Door Assemblies
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/UL 10C-2009 Standard for Safety for Positive Pressure Fire Tests of Door Assemblies
ANSI/UL 10C-2001 Standard for Safety for Positive Pressure Fire Tests of Door Assemblies
ANSI/AAMI ST72-2002 Bacterial endotoxin - Test methodologies, routine monitoring and alternatives to batch testing
ANSI/ASTM A966:1996 Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
ANSI/SCTE 46-2007 Test Method for AC to DC Power Supplies

Standard Association of Australia （SAA）, Orthogonal test

AS 60068.2.6:2003 Environmental testing - Tests - Test Fc: Vibration (sinusoidal)
AS 60068.2.50:2003 Environmental testing - Tests - Test Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
AS 60695.10.3:2006 Fire hazard testing - Abnormal heat - Mould stress relief distortion test
AS 2582.11:2003 Complete, filled transport packages - Methods of test - Sinusoidal vibration tests using a variable frequency
AS 60068.2.75:2003 Environmental testing - Tests - Test Eh: Hammer tests
AS 4155.3:1993 Test methods for general access floors - Test for panel squareness
AS 60068.2.20:2004 Environmental testing - Tests - Test T: Soldering
AS 60068.2.2:2003 Environmental testing - Tests - Test B: Dry heat
AS 60068.2.11:2003 Environmental testing - Tests - Test Ka: Salt mist
AS 60068.2.54:2004 Environmental testing - Tests - Test Ta: Soldering - Solderability testing by the wetting balance method
AS 60068.2.41:2003 Environmental testing - Tests - Test Z/BM: Combined dry heat/low air pressure tests
AS 60068.2.68:2003 Environmental testing - Tests - Test L: Dust and sand
AS 60068.2.74:2003 Environmental testing - Tests - Test Xc: Fluid contamination
AS 60068.2.78:2003 Environmental testing - Tests - Test Cab: Damp heat, steady state
AS 60068.2.44:2004 Environmental testing - Tests - Guidance on test T: Soldering
AS 60068.2.39:2003 Environmental testing - Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
AS 60068.2.38:2003 Environmental testing - Tests - Test Z/AD: Composite temperature/humidity cyclic test
AS 60695.11.40:2006 Fire hazard testing - Test flames - Confirmatory tests - Guidance
AS 60068.2.9:2003 Environmental testing - Tests - Guidance for solar radiation testing
AS 4420.1:1996 Windows - Methods of test - Test sample, preparation for tests, and test sequence
AS 60068.2.42:2004 Environmental testing - Tests - Test Kc: Sulphur dioxide test for contacts and connections

International Electrotechnical Commission (IEC), Orthogonal test

IEC 60068-2-6/COR1:1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-6:1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-6:2007 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-59:1990 Environmental testing; part 2: tests methods; test Fe: vibration; sine-beat method
IEC 60068-2-57:2013 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
IEC 60695-10-2:2003 Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test
IEC 60068-2-6:1982 Basic environmental testing procedures. Part 2 : Tests. Test Fc and guidance: Vibration (sinusoidal)
IEC 60068-2-50:1983 Basic environmental testing procedures. Part 2 : Tests. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
IEC 60068-2-51:1983 Basic environmental testing procedures; part 2: tests; test Z/BFc: combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
IEC 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal)
IEC 60068-2-53:1984 Basic environmental testing procedures. Part 2 : Tests. Guidance to Tests Z/AFc and Z/BFc : Combined temperature (cold and dry heat) and vibration (sinusoidal) tests.
IEC 60695-10-3:2002 Fire hazard testing - Part 10-3: Abnormal heat; Mould stress relief distortion test
IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
IEC 60068-2-52:1984 Basic environmental testing procedures. Part 2 : Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test
IEC 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
IEC 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds

Japanese Industrial Standards Committee (JISC), Orthogonal test

JIS C 60068-2-6:1999 Environmental testing -- Part 2: Tests -- Test Fc: Vibration (sinusoidal)
JIS C 0040:1999 Environmental testing Part 2: Tests -- Test Fc: Vibration (sinusoidal)
JIS C 60068-2-6:2010 Environmental testing -- Part 2-6: Tests -- Test Fc: Vibration (sinusoidal)
JIS Q 17025:2000 General requirements for the competence of testing and calibration laboratories
JIS C 0040:1995 Basic environmental testing procedures Part 2: Tests, Test Fc and guidance: Vibration (sinusoidal)
JIS C 60068-2-59:2001 Environmental testing -- Part 2: Test methods Test Fe: Vibration -- Sine-beat method
JIS C 0056:2001 Environmental testing -- Part 2: Test methods Test Fe: Vibration -- Sine-beat method
JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS C 60068-2-50:1997 Basic environmental testing procedures Part 2: Tests Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
JIS C 60068-2-51:1997 Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
JIS C 0038:1997 Basic environmental testing procedures Part 2: Tests Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
JIS Z 3131:1976 Method of tension test for front fillet welded joint
JIS C 0037:1997 Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
JIS C 5402-6-4:2005 Connectors for electronic equipment -- Tests and measurements -- Part 6-4: Dynamic stress tests -- Test 6d: Vibration (sinusoidal)
JIS C 0039:1997 Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
JIS C 60068-2-53:1997 Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
JIS C 60695-10-3:2005 Fire hazard testing -- Part 10-3: Abnormal heat -- Mould stress relief distortion test
JIS C 60695-10-3:2021 Fire hazard testing -- Part 10-3: Abnormal heat -- Mould stress relief distortion test
JIS D 0802:2015 Intelligent transport systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures
JIS Z 9325:1996 General requirements for the competence of calibration and testing laboratories
JIS Q 17025:2005 General requirements for the competence of testing and calibration laboratories
JIS K 6225 AMD 1:2023 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests (Amendment 1)
JIS C 60068-2-75:2004 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS C 60068-2-75:2019 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS C 0044:1995 Environmental testing Part 2: Tests. Test Ed: Free fall
JIS C 60068-2-78:2004 Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state
JIS C 60068-2-78:2015 Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state
JIS L 0872:1975 Testing method for colour fastness to cross-dyeing of wool
JIS C 0024:2000 Environmental testing -- Part 2: Tests -- Test Kb: Salt mist, cyclic (sodium, chloride solution)
JIS C 0023:1989 Basic environmental testing procedures Part 2: Tests -- Test Ka: Salt mist
JIS C 0034:1996 Environmental testing Part 2: Tests -- Test R and guidance: Water
JIS C 0050:1996 Basic environmental testing procedures Part 2: Tests. Test T: Soldering

VN-TCVN, Orthogonal test

TCVN 7699-2-6-2009 Environmental testing.Part 2-6: Tests.Test Fc: Vibration (sinusoidal)
TCVN 5193-1990 Fluid power drive.Positive displacement pumps.Acceptance rules and methods testing
TCVN 7699-2-75-2011 Environmental testing.Part 2-75: Tests.Test Eh: Hammer tests

European Committee for Electrotechnical Standardization（CENELEC）, Orthogonal test

EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
HD 323.2.6 S2-1988 Basic Environmental Testing Procedures - Part 2: Tests. Test Fc and Guidance: Vibration (Sinusoidal)
HD 323.2.50 S1-1987 Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens
HD 323.2.59 S1-1991 Basic Environmental Testing Procedures Part 2: Tests Test Fe: Vibration - Sine Beat Method
HD 323.2.51 S1-1987 Basic Environmental Testing Procedures Part 2: Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non Heat-Dissipating Specimens
EN 60068-2-59:1993 Environmental Testing Part 2: Test Methods Test Fe: Vibration - Sine Beat Method (Remains Current)
EN 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
HD 323.2.30 S3-1988 Basic Environmental Testing Procedures - Part 2: Tests. Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle)
EN 60512-6-4:2002 Connectors for Electronic Equipment - Tests and Measurements - Part 6-4: Dynamic Stress Test 6d: Vibration (Sinusoidal)
EN 60068-2-30:2005 Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12 Hour Cycle)
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
HD 580 S1-1990 Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers
EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials

CENELEC - European Committee for Electrotechnical Standardization, Orthogonal test

EN 60068-2-6:1995 Environmental Testing Part 2 : Tests Test Fc : Vibration (Sinusoidal)
EN 60068-2-30:1999 Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat@ Cyclic (12 + 12 Hour Cycle)

Association Francaise de Normalisation, Orthogonal test

NF C20-706*NF EN 60068-2-6:2008 Environmental Testing - Part 2-6 : tests - Test Fc : vibration (sinusoidal).
NF C20-706:1995 Environmental testing. Part 2 : tests. Tests fc : vibration (sinusoidal).
NF H90-203*NF EN 283:1991 Swap bodies. Testing.
NF C20-700-2-57*NF EN 60068-2-57:2013 Environmental testing - Part 2-57 : tests - Test Ff : vibration - Time-history and sine-beat method
NF C20-759:1994 Environmental testing. Part 2 : test methods. Test Fe : vibration sine beat method.
NF C20-924-10-2:2004 Fire hazard testing - Part 10-2 : abnormal heat - Ball pressure test.
NF T20-660:1982 Butan-1-ol for industrial use. Methods of test.
NF ISO 1217:2009 Compresseurs volumétriques - Essais de réception
NF Q03-071:1983 Paper and board tests. Board crushing test. Static calibration of the crushing machine.
NF E60-123/A1*NF ISO 2407/A1:2016 Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy -Amendment 1
NF P98-253-2:1996 Test relating to pavements. Bituminous mixtures permanent deformation. Part 2 : repeated sinusoidal compression test.
NF C20-924-10-2*NF EN 60695-10-2:2014 Fire hazard testing - Part 10-2 : abnormal heat - Ball pressure test method
NF E48-032/A1:2012 Hydraulic fluid power - Cylinders - Acceptance tests - Amendment 1.
NF C93-400-6-4*NF EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4 : dynamic stress tests - Test 6d : vibration (sinusoidal).
NF G35-054-2/A1*NF EN ISO 11378-2/A1:2017 Textile floor coverings - Laboratory soiling tests - Part 2 : drum test - Amendment 1
NF EN 14343:2006 Pompes volumétriques rotatives - Essais de performances pour la réception
NF F01-363:2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests.
NF C42-160-2*NF EN 60477-2:1998 Laboratory resistors. Part 2 : laboratory a.c. resistors.
NF EN 60212:2011 Conditions normales à observer avant et pendant les essais de matériaux isolants électriques solides
NF F18-206:2010 Railway applications - Axleboxes - Performance testing.
NF F18-206/IN1:2010 Railway applications - Axleboxes - Performance testing.
NF C20-775:1998 Environmental testing. Part 2 : tests. Test Eh : hammer tests.
NF T30-038:2013 Paints and varnishes - Cross-cut test
NF T30-038:1994 Paints and varnishes. Cross-cut test.
NF H00-081:1993 Packaging. Complete, filled transport packages. Vibration tests using a sinusoidal variable frequency.
NF C20-700-2-75*NF EN 60068-2-75:2015 Environmental testing - Part 2-75 : tests - Test Eh : hammer tests
NF C32-011-507*NF EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507 : mechanical tests - Hot set test for cross-linked materials
NF A03-002-1:2005 Metallic materials - Verification of static uniaxial testing machines - Part 1: tension/compression testing machines - Verification and calibration of the force measuring system
NF C32-011-403*NF EN 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403 : miscellaneous tests - Ozone resistance tests on cross-linked compounds
NF EN 60811-507:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 507 : essais mécaniques - Essai d'allongement à chaud pour les matériaux réticulés
NF C64-111:2001 Synthetic testing of high-voltage alternating current circuit-breakers.
NF EN ISO 9018:2015 Essais destructifs des soudures sur matériaux métalliques - Essai de traction des assemblages en croix et à recouvrement
NF EN ISO 14323:2015 Soudage par résistance - Essais destructifs des soudures - Dimensions des éprouvettes et mode opératoire pour les essais de cisaillement par choc et les essai de traction par choc sur éprouvettes en croix des soudures par résistance par points et ...
NF EN 60811-403:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 403 : essais divers - Essai de résistance à l'ozone sur les mélanges réticulés

Korean Agency for Technology and Standards (KATS), Orthogonal test

KS C IEC 60068-2-6:2015 Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS C 0248-59-2001(2016) Environmental testing－Part 2：Test methods－ Test Fe : Vibration－Sine-beat method
KS C IEC 60068-2-53-2017(2022) Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests
KS F ISO 13785-1:2006 Reaction-to-fire tests for facades-Part 1:Intermediate-scale test
KS C 0240-1998 Basic environmental testing procedures Part 2 : Tests Test Fc and guidance : Vibration (sinusoidal)
KS M 2415-2006 Standard test method for n－heptane insolubles
KS M ISO 18899:2007 Rubber－Guide to the calibration of test equipment
KS M ISO 18899:2017 Rubber－Guide to the calibration of test equipment
KS C IEC 60512-6-4-2003(2008) Connectors for electronic equipment－Tests and measurements－Part 6－4：Dynamic stress tests－Test 6d：Vibration(sinusoidal)
KS C IEC 60512-6-4:2003 Connectors for electronic equipment-Tests and measurements-Part 6-4:Dynamic stress tests-Test 6d:Vibration(sinusoidal)
KS C 0248-59-2001 Environmental testing－Part 2：Test methods－ Test Fe : Vibration－Sine-beat method
KS C IEC 60512-6-4:2014 Connectors for electronic equipment－Tests and measurements－Part 6－4：Dynamic stress tests－Test 6d：Vibration(sinusoidal)
KS C 0240-1998(2013) Basic environmental testing procedures Part 2 : Tests Test Fc and guidance : Vibration (sinusoidal)
KS C 0237-1999(2009) Environmental testing test Cb：Damp heat, steady state
KS B ISO 7500-1:2003 Metallic materials-Verification of static uniaxial testing machines-Part 1:Tension/compression testing machines-Verification and calibration of the force-measuring system
KS B ISO 7500-1:2013 Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
KS C 0293-1999 Basic environmental testing procedures Part 2：Tests.Tests Z ¤ AFc：Combined cold ¤ vibration(sinusoidal) tests for both heatdissipating and nonheatdissipating specimens
KS M 2415-2006(2021) Standard test method for n-heptane insolubles
KS C 0227-2001 Basic environmental testing procedures-Part 2 : Tests-Test Db and guidance : Damp heat, cyclic(12+12-hour cycle)
KS M 0119-1993 Testing method for ion exchange resin
KS C 0293-1999(2012) Basic environmental testing procedures Part 2：Tests.Tests Z ¤ AFc：Combined cold ¤ vibration(sinusoidal) tests for both heatdissipating and nonheatdissipating specimens
KS R ISO 15828-2009(2019) Road vehicles－Offset frontal impact test procedure
KS P ISO 10328-7:2009 Prosthetics－Structural testing of lower-limb prostheses－Part 7：Test submission document
KS P ISO 10328-7:2004 Prosthetics－Structural testing of lower-limb prostheses－Part 7：Test submission document
KS C IEC 60811-507:2015 Electric and optical fibre cables — Test methods for non-metallic materials — Part 507: Mechanical tests — Hot set test for cross-linked materials
KS C IEC 60068-2-75-2017(2022) Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS C 2118-1996 Testing method for alternating-current magnetic properties of materials at power frequencies using the wattmeter- ammeter-voltmeter method and 25cm epstein test frame
KS M ISO 2409:2013 Paints and varnishes — Cross-cut test
KS C IEC 60427:2002 Synthetic testing of high-voltage alternating current circuit-breakers
KS M ISO 2409:2008 Paints and varnishes-Cross-cut test
KS C IEC 60427:2016 Synthetic testing of high－voltage alternating current circuit－breakers
KS I ISO 4870:2004 Acoustics-The construction and calibration of speech intelligibility tests
KS C IEC 60068-2-1:2010 Environmental testing－Part 2-1：Tests－Test A：Cold
KS C 0294-1999(2009) Basic environmental testing procedures Part 2：TestsGuidance to tests Z/AFc and Z/BFc：Combined temperature (cold and dry heat) and vibration(sinusoidal) tests
KS B ISO 14323-2007(2012) Resistance spot welding and projection welds－Destructive testing of welds－Specimen dimensions and procedure for impact sheaar test and cross－tension testing
KS C IEC 60068-2-2:2014 Environmental testing — Part 2-2: Tests — Test B: Dry heat
KS C IEC 60068-2-75:2010 Environmental testing-Part 2:Tests-Test Eh:Hammer tests
KS C IEC 60068-2-75:2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS B ISO 9513:2002 Metallic materials-Calibration of extensometers used in uniaxial testing
KS B ISO 9513:2013 Metallic materials－Calibration of extensometers used in uniaxial testing
KS C IEC 60811-403-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 403: Miscellaneous tests — Ozone resistance test on cross-linked compounds
KS B ISO 7500-2:2004 Metallic materials-Verification of static uniaxial testing machines-Part 2:Tension creep testing machines-Verification of the applied load
KS B ISO 7500-2:2013 Metallic materials－Verification of static uniaxial testing machines－Part 2：Tension creep testing machines－Verification of the applied load

国家市场监督管理总局、中国国家标准化管理委员会, Orthogonal test

GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.48-2018 Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method
GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）
GB/T 5170.19-2018 Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment
GB/T 5170.13-2018 Inspection methods for environmental testing equipments—Part 13: Mechanical vibrating type system for vibration(sinusoidal) test
GB/T 5170.15-2018 Inspection methods for environmental testing equipments—Part 15：Hydraulic vibrating type system for vibration(sinusoidal) test
GB/T 17215.231-2021 Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 31:Product safety requirements and tests
GB/T 4473-2018 Synthetic testing of high—voltage alternating current circuit—breakers

German Institute for Standardization, Orthogonal test

DIN EN 60068-2-59:1995 Environmental testing - Part 2: Tests methods; test Fe: Vibration, sine beat method (IEC 60068-2-59:1990); German version EN 60068-2-59:1993
DIN EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:2007); German version EN 60068-2-6:2008
DIN EN 60695-10-2:2004 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test (IEC 60695-10-2:2003); German version EN 60695-10-2:2003
DIN EN 14363:2005 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests; German version EN 14363:2005
DIN EN 14343:2006-11 Rotary positive displacement pumps - Performance tests for acceptance; German version EN 14343:2005
DIN EN 14343 Berichtigung 1:2009-05 Rotary positive displacement pumps - Performance tests for acceptance; German version EN 14343:2005, Corrigendum to DIN EN 14343:2006-11; German version EN 14343:2005/AC:2008
DIN EN 60695-10-3:2003 Fire hazard testing - Part 10-3: Abnormal heat; Mould stress relief distortion test (IEC 60695-10-3:2002); German version EN 60695-10-3:2002
DIN EN 12082:1998 Railway applications - Axleboxes - Performance testing; German version EN 12082:1998
DIN 49842-3:1986 Lamps for traffic lights; requirements and tests
DIN EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005
DIN EN ISO 7500-1 Bb.1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio
DIN EN 60068-2-75:1998 Environmental testing - Part 2: Tests; test Eh: Hammer tests (IEC 60068-2-75:1997); German version EN 60068-2-75:1997
DIN EN ISO 2409:1994 Paints and varnishes - Cross-cut test (ISO 2409:1992); German version EN ISO 2409:1994
DIN EN ISO 7500-1 Beiblatt 1:2021 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification and calibration of ten
DIN EN ISO 9227/A1:2023-11 Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/DAM 1:2023); German and English version EN ISO 9227:2022/prA1:2023 / Note: Date of issue 2023-09-29*Intended as an amendment to DIN EN ISO 92...
DIN EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004
DIN 54401:2000 Testing of ion exchangers (bead form) - Sampling

American Society for Testing and Materials (ASTM), Orthogonal test

ASTM E2010-99 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies
ASTM A772/A772M-00(2005) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2011) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2011)e1 Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM E2010-01 Standard Test Method for Positive Pressure Fire Tests of Window Assemblies (Withdrawn 2007)
ASTM D5112-98(2003) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D5112-98(2009) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D5112-98 Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM B810-01a(2017) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM D5607-02(2006) Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D2904-97 Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
ASTM D2904-97(2002) Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
ASTM D3279-12 Standard Test Method for n-Heptane Insolubles
ASTM B810-01 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B810-00 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B810-01a Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM D4467-94 Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data
ASTM D4467-94(2001) Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data
ASTM D712-47 Method of Test for Light Sensitivity of Traffic Paint
ASTM E1258-88(2003) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM C187-10 Standard Test Method for Normal Consistency of Hydraulic Cement
ASTM C187-11 Standard Test Method for Normal Consistency of Hydraulic Cement
ASTM D6505-00(2012) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D6505-00(2017) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM E2427-22 Standard Test Method for Acceptance by Performance Testing for Test Sieves
ASTM D797-82 Test Method for Rubber Property-Young's Modulus at Normal and Subnormal Temperatures
ASTM E423-71(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens

Professional Standard - Electron, Orthogonal test

SJ/Z 9001.18-1987 Basic environmental testing procedures--Part 2: Tests--Test Fc: Vibration(sinusoidal)
SJ/Z 9001.29-1987 Basic environmental testing procedures--Part 2: Tests--Test Z/BFc: Combined high temperature/vibration(Sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimen
SJ/Z 9001.28-1987 Basic environmental testing procedures--Part 2: Tests--Test Z/AFc: Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
SJ 20533-1995 Measuring methods of crossed field amplifier tubes
SJ 20115.4-1992 Environmental conditions and test methods for aircraft radar.Humidity/heat alteration test
SJ/Z 9001.42-1987 Basic environmental testing procedures--Part 2: Tests--Test Z/AFc and Z/BFc: Combined temperature (Cold and dry heat) and vibration (sinusoidol) tests for both heat-dissiputing and

Institute of Electrical and Electronics Engineers (IEEE), Orthogonal test

IEEE Std C57.98/COR-1998 Transformer impulse tests; Correction
IEEE 1671.1-2009 Trial-Use Standard for Automatic Test Markup Language (ATML) for exchanging automatic test equipment and test information via XML: Exchanging test descriptions
IEEE 1671.6-2008 Trial-use standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML: Exchanging test station information
IEEE 1671.4-2007 IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via eXtensible Markup Language (XML): Exchanging Test Configuration Information
IEEE 1671.5-2008 IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML: Exchanging Test Adapter Information
IEEE 1445-1998 Standard for Digital Test Interchange Format (DTIF)
IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

IT-UNI, Orthogonal test

UNI EN 78-1978
UNI 5294-1978 Mechanical tests of ferrous material. Reverse bend test for steel wires.

RO-ASRO, Orthogonal test

STAS 9904/7-1975 ELECTRICAL ROTATNG MACHINES Test methods Commutation test

IN-BIS, Orthogonal test

International Organization for Standardization (ISO), Orthogonal test

ISO 9227:2022/CD Amd 1:2023 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1
ISO 13785-2:2002 Reaction-to-fire tests for facades - Part 2: Large-scale tests
ISO 13785-1:2002 Reaction-to-fire tests for facades - Part 1: Intermediate-scale tests
ISO 410:1982 Metallic materials; Hardness test; Tables of Brinell hardness values for use in tests made on flat surfaces
ISO 755-3:1981 Butan-1-ol for industrial use; Methods of test; Part 3: Sulphuric acid colour test
ISO 18899:2004 Rubber - Guide to the calibration of test equipment
ISO 9227:2022/DAmd 1:2023 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of warning
ISO 7500-1:1986 Metallic materials; Verification of static uniaxial testing machines; Part 1 : Tensile testing machines
ISO 10328-7:1996 Prosthetics - Structural testing of lower-limb prostheses - Part 7: Test submission document
ISO 18375:2016 Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell test
ISO 19365:2016 Passenger cars - Validation of vehicle dynamic simulation - Sine with dwell stability control testing
ISO/TR 4870:1991 Acoustics; the construction and calibration of speech intelligibility tests
ISO 7500-1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO 4648:1978/Amd 1:1981 Rubber, vulcanized — Determination of dimensions of test pieces and products for test purposes — Amendment 1
ISO 755-1:1981 Butan-1-ol for industrial use; Methods of test; Part 1 : General
ISO 20344:2021/DAmd 1 Personal protective equipment — Test methods for footwear — Amendment 1
ISO 7895:1987 Facades made of components — Tests for resistance to positive and negative static pressure generated by wind

Professional Standard - Petroleum, Orthogonal test

SY/T 5134-1993 Basic environmental test methods for petroleum exploration and development instruments Test G: Vibration (sine) test
SY 6216-1996 Performance test method of crosslinking agent for fracturing
SY/T 6216-1996 Performance test method of crosslinking agent for fracturing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Orthogonal test

GB/T 2423.10-2008 Environmental testing for electric and electronic products.Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 6323.4-1994 Controllability and stability test procedure for automobiles-Returnability test
GB/T 3048.11-1994 Test methods for determining electrical properties of electric cables and wires.Dielectric dissipation factor measurement
GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
GB/T 2423.49-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
GB/T 2423.35-2005 Environmental testing for electric and electronic products.Part 2:Tests Tests Z/AFc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 2423.36-2005 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 2423.18-2012 Environmental testing.Part 2:Test methods.Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 3048.8-1994 Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products. Test Db:Damp heat,cyclic
GB/T 2423.35-1986 Basic environmental testing procedures for electric and electronic products--Test Z/AFc: Combined low temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 5170.14-2023 Inspection methods for environmental testing equipment Part 14: Electric vibration system for vibration (sinusoidal) testing
GB/T 15747-1995 Method of tension test for front fillet welded joint
GB/T 3048.11-2007 Test methods for electrical properties of electric cables and wires.Part 11: Test for dielectric dissipation factor
GB/T 5169.21-2006 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test
GB/T 2423.18-2000 Environmental testing-Part 2: Tests-Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.42-1995 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
GB/T 4857.7-2005 Packaging-Basic tests for transport packages-Part 7:Sinusoidal vibration test method at constant frequency
GB/T 4857.10-2005 Packaging-Basic tests for transport packages-Part 10:Sinusoidal vibration test method using at variable vibration frequency
GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
GB/T 7094-2002 Vibration (sinusoidal) test method for electrical installations in ships
GB/T 16905-1997 Test method for the crane of container front-handling mobile
GB/T 7094-2016 Vibration (sinusoidal) test method for electrical installations in ships
GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
GB/T 5169.21-2017 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test method
GB/T 3048.8-2007 Test methods for electrical properties of electric cables and wires.Part 8: AC voltage test
GB/T 18589-2001 Correction of atmospheric pressure for distillation test of products of coal carbonization
GB/T 4451-1984 Methods of vibration(sinusoidal) test for use in industrial process measurement and control instrument
GB/T 11117.2-1989 Knock test reference fuels--Reference fuel--n-Heptane
GB/T 5170.14-2009 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products.Electrodynamic vibrating type machines for vibration(sinusoidal)test
GB/T 2423.55-2023 Environmental testing Part 2: Test methods Test Eh: Hammer test
GB/T 2423.36-1986 Basic environmental testing procedures for electric and electronic products--Tests Z/BFc:Combined high temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 21853-2008 Chemicals.Partition coefficient(n-octanol/water).Shake flask method
GB/T 4473-1996 Synthetic testing of high-voltage alternating current circuit-breakers
GB/T 4473-2008 Synthetic testing of High-voltage alternating current circuit-breakers
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test

Professional Standard - Water Conservancy, Orthogonal test

SL 237-068-1999 Geotechnical Test Procedure - Cation Exchange Capacity Test

National Metrological Technical Specifications of the People's Republic of China, Orthogonal test

JJF 1230-2009 Calibration Specification of the Anthrompomorphic Test Device in Vehicle Frontal Collision Test
JJF 1803-2020 Calibration Specification for the Anthropomorphic Test Device (H-Ⅲ Female) of Vehicle Frontal Impact Test

AASHTO - American Association of State Highway and Transportation Officials, Orthogonal test

T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
T 129-2006 Standard Method of Test for Normal Consistency of Hydraulic Cement
T 129-2011 Standard Method of Test for Normal Consistency of Hydraulic Cement

Taiwan Provincial Standard of the People's Republic of China, Orthogonal test

CNS 3629-1989 Basic Environmental Testing Procedures Part 2: Tests, Test Fc and Guidance : Vibration (Sinusoidal)
CNS 7137-1997 Sine-vibration testing method for automobile parts
CNS 13298-1993 Method of Test for Water Permeability of Geotextiles by Permittivity
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
CNS 14969-2-75-2006 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
CNS 6169-1987 Method of Test for Alternators for Automobiles
CNS 9200-1982 Method of Corrective Test for Etched - Stem Mercury - in - Glass Thermometer (Partial Immersion Type)
CNS 318-1971 AC Circuit Breakers (for Short Circuit Test)

The American Road & Transportation Builders Association, Orthogonal test

AASHTO T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO T 129-2011 Standard Method of Test for Normal Consistency of Hydraulic Cement

Professional Standard - Medicine, Orthogonal test

YY/T 0991-2015 Clinical trial guideline for orthodontic brackets
YY/T 1546-2017 Test method for CT attenuation correction in SPECT imaging

Danish Standards Foundation, Orthogonal test

DS/IEC 68-2-6:1986 Basic environmental testing procedures. Part 2: Tests. Test Fc and guidance: Vibration (sinusoidal) with Amendment nr.1(1983) and Amendment no.2(1985)
DS/EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1
DS/IEC 68-2-50:1986 Basic environmental testing procedures. Part 2: Tests. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
DS/IEC 68-2-51:1986 Basic environmental testing procedures. Part 2: Tests. Test Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
DS 2363:1993 Measuring equipment. Sine bars. Requirements, testing, marking
DS/IEC 68-2-53:1986 Basic environmental testing procedures. Part 2: Tests. Guidance to Tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
DS/IEC 68-2-52:1986 Basic environmental testing procedures. Part 2: Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
DS/ISO 17892-12:2021 Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of liquid and plastic limits – Amendment 1
DS/IEC 68-2-59:1992 Environmental testing. Part 2: Tests. Test Fe: Vibration. Sine-beat method
DS/EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
DS/IEC 68-2-30:1986 Basic environmental testing procedures. Part 2: Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) with Amendment No.1(1985)
DS/EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials

NL-NEN, Orthogonal test

NEN 10068-2-59-1994 Environmental testing. Part 2: Test methods. Test Fe: Vibration. Sine beat method (IEC 68-2-59:1990)
NEN 3368-1971 Test methods for felt-backed PCV floor coverings
NEN 3303-1983 Hawser-laid and plaited ropes - Requirements and test methods

Professional Standard - Aerospace, Orthogonal test

QJ 1323.4-1987 Electromagnetic relay test method alternating damp heat test
QJ 1238.4-1987 Alternating Damp Heat Test of Cable Test Method on Missile Launch Vehicle
QJ 1238.17-1987 AC voltage test of cable test method on missile launch vehicle

KR-KS, Orthogonal test

KS C IEC 60068-2-53-2017 Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests
KS P ISO 10328-7-2004 Prosthetics－Structural testing of lower-limb prostheses－Part 7：Test submission document
KS R ISO 19365-2018(2023) Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability control testing

RU-GOST R, Orthogonal test

GOST 25872-1983 Facsimile apparatus with redundancy reduction means for weater map transmission and reception. Basic parameters
GOST 28203-1989 Basic environmental testing procedures. Part 2. Tests. Test Fc and quidance: Vibration ( sinusoidal )
GOST 10896-1978 Ion-exchange resins. Preparation of specimens for tests
GOST 17553-1972 Ion-exchange membranes. Methods for preparation of specimens for tests
GOST IEC 60811-507-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials
GOST R 53346-2009 Units of lower-limb orthoses. Technical requirements and test methods
GOST R 53346-2021 Units of lower-limb orthoses. Technical requirements and test methods
GOST IEC 60811-403-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 403. Miscellaneous tests. Ozone resistance test on cross-linked compounds

ESDU - Engineering Sciences Data Unit, Orthogonal test

ESDU 83029 D-1992 The correction of flight-test anemometric data.

Professional Standard - Electricity, Orthogonal test

DL/T 474.4-2006 Guide for insulation test on site AC voltage withstanding test
DL/T 474.4-2018 Guide for insulation test on site AC voltage withstanding test
DL 474.4-1992 Guidelines for Implementation of On-Site Insulation Tests AC Withstand Voltage Test
DL/T 909-2004 Code of performance test for positive pneumatic ash conveying systems
DL/T 274-2012 Hand-over test of ±800kV HVDC electric equipments
DL/T 1399.4-2020 Electric power test/inspection vehicle Part 4: AC withstand voltage test vehicle for switching appliances
DL/T 690-2013 Synthetic testing of high-voltage alternating current circuit-breakers
DL/T 1220-2013 Code for hand-over tests of series capacitor installation

Professional Standard - Textile, Orthogonal test

FZ/T 01054.3-1999 Test method for fabric style - Test method for interweave resistance

Military Standard of the People's Republic of China-General Armament Department, Orthogonal test

GJB 87-1986 Airborne fire control radar cross-link test and installation test rules
GJB 4.6-1983 Environmental test of ship electronic equipment, alternating damp heat test
GJB 797.16-1990 Environmental test methods for mine blasting equipment - alternating damp heat test
GJB 5549-2006 Test code for interconnection of airborne electronic equipments
GJB 3208-1998 New aircraft arrival test flight handover acceptance requirements
GJB 5549A-2021 Cross-linking test procedures for airborne electronic equipment

TH-TISI, Orthogonal test

TIS 2380.2-30-2010 Environmental testing.part 2-30: tests.test db:damp heat, cyclic (12 h + 12 h cycle)

CZ-CSN, Orthogonal test

CSN 110030-2002 Hand pumps - Testing and delivery

PL-PKN, Orthogonal test

PN E04606-03-1986 Basic environmental testing procedures Test Fe and ?uidance: Vibration (sinusoidal) [Translation of Publication IEC 68-2-6, (1982)]
PN E04160 ArkusZ85-1973 Electric cablei Methods o? ?eMing Crou?alk at?enua?ion ?est
PN E06105-02-1991 High-voltage alternating-current circuit-breakers. Type tests

Professional Standard-Ships, Orthogonal test

CB 1146.13-1985 Environmental test method test Kb for ship equipment: Alternating salt spray

U.S. Air Force, Orthogonal test

AIR FORCE MIL-PRF-32020-1998 TESTER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER

ES-UNE, Orthogonal test

UNE-EN 14343:2007/AC:2009 Rotary positive displacement pumps - Performance tests for acceptance

GB-REG, Orthogonal test

REG NASA-LLIS-0730--2000 Lessons Learned ?Sine-Burst Load Test

VDE - VDE Verlag GmbH@ Berlin@ Germany, Orthogonal test

FNN WIRKVERBRAUCHZAEHLER@ WECHSELSTROM-2009 Leitfaden fuer die Annahmepruefung von Wechselstrom-Wirkverbrauchzaehlern

GM Daewoo, Orthogonal test

GMKOREA EDS-T-7737-2011

Society of Automotive Engineers (SAE), Orthogonal test

SAE AIR4298-2014 Impulse Test Machine, Sine Wave, Equipment and Operation of
SAE AIR4298-1992 Impulse Test Machine, Sine Wave, Equipment and Operation of

Professional Standard - Commodity Inspection, Orthogonal test

SN/T 2498.1-2010 Basic environmental testing procedures for import and export fireworks-Test Db: Damp heat,cyclic

SE-SIS, Orthogonal test

SIS SS 13 71 31-1986 Concrete testing - Fresh concrete - Consistency - Modified vebe test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Orthogonal test

GB/T 32065.7-2015 Environmental test methods for oceanographic instruments—Part 7：Damp heat, cyclic
GB/T 2423.3-2016 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state

TR-TSE, Orthogonal test

TS 2689-1977 High - Voltage Alternatig - Current Circuit - Breakers Part 4 : Type Tests And Routine Tests
TS 2090-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ALECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Fc:VIBRATION (SINUSOIDAL)

Canadian General Standards Board （CGSB), Orthogonal test

CGSB 4.2 NO. 27.7-M89-CAN/CGSB-1989 Textile Test Methods Combustion Resistance of Mattresses - Cigarette Test Amendment 1: April 2002

YU-JUS, Orthogonal test

JUS H.B8.249-1987 Butan- l-ol for industrial use. Sulphuric acid colour test. Colorimetric method
JUS N.A5.721-1980 Basic environmental testing procedures. TestDb: Damp heat cyctic (12 +12 hour cyck)

GM Europe, Orthogonal test

JSAE - Society of Automotive Engineers of Japan@ Inc., Orthogonal test

JASO Z103-1983 Frontal Barrier Collision Test Procedure for Passenger Cars

CN-QIYE, Orthogonal test

Q/GDW 275-2009 Handover acceptance test of electrical equipment in ±800kV DC system
Q/GDW 1157-2013
Q/GDW 636-2011 Handover Test and Acceptance Procedures for Stationary DC Ice Melting Devices

Lithuanian Standards Office , Orthogonal test

LST EN ISO 5173:2010/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd.1:2011)
LST EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006)

BE-NBN, Orthogonal test

NBN-EN 60427-1994 Report on synthetic testing of high voltage alternating current circuit-breakers
NBN-ISO/TR 4870:1992 Le présent rapport technique existe en deux versions officielles (anglais, fran?ais).
NBN C 06-203-1977
NBN C 06-204-1977

ZA-SANS, Orthogonal test

SANS 2409:1992 Paints and varnishes - Cross-cut test

Zhejiang Provincial Standard of the People's Republic of China, Orthogonal test

DB33/T 2204-2019 Test procedures for self-luminous traffic signs

国家能源局, Orthogonal test

NB/T 42138-2017 High Voltage AC Circuit Breaker Test Guidelines

ES-AENOR, Orthogonal test

API - American Petroleum Institute, Orthogonal test

API TR 10TR5-2008 Methods for Testing of Solid and Rigid Centralizers (First Edition)
API TR 10TR5 RUSSIAN-2008 METHODS FOR TESTING OF SOLID AND RIGID CENTRALIZERS (First Edition)

国家铁路局, Orthogonal test

TB/T 3523.2-2018 Test methods for AC drive electric locomotives Part 2: Input characteristics test
TB/T 3523.1-2018 Test methods for AC drive electric locomotives Part 1: Output characteristics test

Professional Standard - Aviation, Orthogonal test

HB 6658-1992 Test method for degree of crosslinking of lightly crosslinked plexiglass

American Society of Mechanical Engineers (ASME), Orthogonal test

ASME PTC 6.1-1984 Interim test code for an alternative procedure for testing steam turbines

Group Standards of the People's Republic of China, Orthogonal test

T/CVMA 66-2021 Technical specification for cross-matching test in canine and feline

Professional Standard - Energy, Orthogonal test

DL/T 2587-2023 Handover test of high voltage flexible DC equipment

NZ-SNZ, Orthogonal test

NZS 3112.2:1986 Methods of Test for Concrete Part 2: Tests Relating to the Determination of Strength of Concrete (Incorporating Amendment 1: 03/1988 and Amendment 2: 07/2000)

AENOR, Orthogonal test

UNE-EN ISO 14460/A1:2002 Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods. Amendment 1: Modified flexion test. (ISO 14460:1999/Amd 1:2002)
UNE-EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials

European Telecommunications Standards Institute (ETSI), Orthogonal test

ETSI ES 203 119-3-2016 Methods for Testing and Specification(MTS); The Test Description Language (TDL); Part 3: Exchange Format (V1.2.1)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Orthogonal test

GJB 3196.40A-2005 Test methods of cartridge.Part 40:Correction factor measurement of powder,temperature to chamber pressure
GJB 3196.39A-2005 Test methods of cartridge.Part 39:Correction factor measurement of powder temperayure to velocity