ZH
RU
ES

parallel

parallel, Total:498 items.

In the international standard classification, parallel involves: Optical equipment, Fasteners, Cutting tools, Screw threads, Optics and optical measurements, Shafts and couplings, Components for aerospace construction, Machine tool systems, Shipbuilding and marine structures in general, Ground service and maintenance equipment, Hand-held tools, Iron and steel products, Refractories, Medical equipment, Bearings, Electrical wires and cables, Materials for aerospace construction, Cableway equipment, Machine tools, Industrial automation systems, Bridge construction, Gears, Wood, sawlogs and sawn timber, Thermodynamics and temperature measurements, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Aids for disabled or handicapped persons, Installations in buildings, Products of the textile industry, Tyres, Valves, Microprocessor systems, Services, Applications of information technology, Vocabularies, Road vehicles in general, Linear and angular measurements, Chipless working equipment, Air quality, Transport, Wood-based panels, Testing of metals, Woodworking equipment, Construction materials, Waxes, bituminous materials and other petroleum products, Ergonomics, Languages used in information technology, Paper and board.


Professional Standard - Machinery, parallel

SE-SIS, parallel

Japanese Industrial Standards Committee (JISC), parallel

KR-KS, parallel

IN-BIS, parallel

CZ-CSN, parallel

YU-JUS, parallel

HU-MSZT, parallel

BE-NBN, parallel

IT-UNI, parallel

PL-PKN, parallel

Korean Agency for Technology and Standards (KATS), parallel

Indonesia Standards, parallel

Defense Logistics Agency, parallel

RO-ASRO, parallel

ES-AENOR, parallel

Association Francaise de Normalisation, parallel

  • NF E22-177:1987 Parallel keys. Dimensions.
  • NF E66-200-2:1993 PARALLEL SHANKS FOR MILLING CUTTERS. PART 2 : DIMENSIONAL CHARACTERISTICS OF FLATTED PARALLEL SHANKS.
  • NF E22-175:1987 Keying. Assembly by means of parrallel keys. Dimensions.
  • NF A45-205:1983 Iron and steel. IPE section. Parallel flanged beams.
  • NF E66-057*NF ISO 7079:2017 Core drills with parallel shanks and with Morse taper shanks
  • NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
  • NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
  • NF A45-201:1983 Iron and steel. Broad, parallel-faced flanged beams. Dimensions.
  • NF E66-024*NF ISO 4206:2017 Counterbores with parallel shanks and solid pilots
  • NF E66-023*NF ISO 4205:2017 Countersinks, 90o, with parallel shanks and solid pilots
  • NF ISO 1708:1997 Conditions de réception des tours parallèles d'usage général - Contrôle de la précision
  • NF E66-350*NF ISO 9766:2012 Drills with indexable inserts - Cylindrical shanks with a parallel flat
  • NF E10-106:1990 Dimensional measuring methods. Part 7 : parallelisme deviation.
  • NF A45-255:1983 IRON AND STEEL. PARALLEL FLANGE CHANNEL SECTIONS (UAP -SECTIONS).
  • NF J41-313:1957 Shipbuilding. Mud traps. Type I. Body with parallel flanges.
  • NF A04-306*NF EN 10306:2002 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams.
  • NF C96-032:1992 IEC 822 VSB. Parallel sub-system bus of the IEC 821 VMEBUS.
  • NF E60-102:1976 Test conditions for numerical control parallel lathes. Testing of the accuracy.
  • NF E64-107:1986 Woodworking machines. Parallel link sawing machines. Nomenclature.
  • NF E60-101*NF ISO 1708:1997 Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.
  • NF P75-212:1997 Thermal insulating products for building applications. Determination of tensile strength parallel to faces.
  • NF EN ISO 15330:1999 Éléments de fixation - Essai de précharge pour la détection de la fragilisation par l'hydrogène - Méthode des plaques parallèles
  • NF ISO 19962:2019 Optique et photonique - Méthodes de mesure spectroscopique pour la diffusion intégrée par des éléments optiques à plans parallèles
  • NF E66-250*NF ISO 3294:2016 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

Taiwan Provincial Standard of the People's Republic of China, parallel

  • CNS 494-1990 Parallel Pipe Threads
  • CNS 12752-1990 Screw Thread Limit Gauges for Parallel Pipe Threads
  • CNS 12754-1990 Method of Test for Parallel Screw Gauges
  • CNS 9215-1982 Grooved Pins, Full Length Parallel Grooved with Chamfer
  • CNS 7110-1981 Cylindrical Roller Bearings, with Parallel Bore, Snap Ring Groove
  • CNS 6438-1980 Short Sounding Pipe Head of Self-Closing Parallel Cock Type
  • CNS 455-2005 Wood - Determination of ultimate shearing stress parallel to grain
  • CNS 8193-1982 Parallel Keys for Machine Tools, Dimension and Application
  • CNS 4847-1982 Hexagon Socket Pipe Plugs with Shoulder and Parallel Thread
  • CNS 4843-1982 Heavy Type Hexagon Head Pipe Plugs with Shoulder and Parallel Thread
  • CNS 5500-1985 Badial Self-aligning Ball Bearings, Parallel and Tapered Bore
  • CNS 4845-1982 Light Type Hexagon Head Pipe Plugs with Shoulder and Parallel Thread

Professional Standard - Aviation, parallel

PT-IPQ, parallel

  • NP 295-1963 Clous semenses à pointes plates
  • NP 2404-1988 Small tools Counterbores with parallel shanks and solid pilots
  • NP 2412-1988 Small tools Finishing reamers for Morse and metric tapers, with parallel shanks and Morse taper shanks

AT-ON, parallel

Professional Standard - Military and Civilian Products, parallel

  • WJ 1068-2004 Collimator series
  • WJ 2682-2007 Specification for multi-tube parallelism detector for artillery
  • WJ 1239-1980 Optical Instrument Assembly Universal Tool Parallel Clips
  • WJ 2636-2004 Method for adjusting the parallelism of each axis of self-propelled anti-aircraft gun weapon system

Professional Standard - Education, parallel

German Institute for Standardization, parallel

  • DIN 344:1981-10 Core drills with parallel shank
  • DIN 327-1:1989-04 Parallel shank slot drills; dimensions
  • DIN 5149:1973 Plane irons with parallel section for reform planes
  • DIN 844-1:1989-04 Parallel shank end mills; dimensions
  • DIN 338:2006-11 Parallel shank twist drills, jobber series
  • DIN 340:2006-11 Parallel shank twist drills, long series
  • DIN 1869:2006-11 Parallel shank twist drills, extra long series
  • DIN 1897:2006-11 Parallel shank twist drills, stub series
  • DIN 10:2009-12 Squares of parallel shanks for rotating tools
  • DIN 6518-1:1989-04 Corner rounding concave milling cutters with parallel shank; dimensions
  • DIN 327-2:1990-04 Parallel shank slot drills; technical delivery conditions
  • DIN 2179:1975-05 Machine Taper Pin Reamers with Parallel Shanks
  • DIN 52185:1976-09 Testing of wood; compression test parallel to grain
  • DIN 6595:1993-11 Drills with indexable inserts; parallel shanks
  • DIN 1809:2021-01 Driving tenons for tools with parallel shank
  • DIN 1835-1:1999-01 Parallel shanks for milling cutters - Part 1: Dimensions / Note: To be replaced by DIN 1835-1 (2022-08).
  • DIN 844-2:1990-04 Parallel shank end mills; technical delivery conditions
  • DIN 1866:2007-12 Countersinks 90°, with parallel shank solid pilot
  • DIN 373:2007-12 Counterbores with parallel shank and solid pilot
  • DIN 339:2006-11 Parallel shank twist drills for use in jig bushes
  • DIN EN ISO 8739:1998-03 Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
  • DIN 1833-2:1990-04 Parallel shank dovetail cutters; technical delivery conditions
  • DIN IEC 60822:1992 IEC 822 VSB; parallel sub-system bus of the IEC 821 VMEbus; identical with IEC 60822:1988; english version HD 576 S1:1990
  • DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
  • DIN 327:2023-04 Parallel shank slot drills - Dimensions and technical delivery conditions / Note: Date of issue 2023-03-24*Intended as replacement for DIN 327-1 (1989-04), DIN 327-2 (1990-04).
  • DIN 859:2007-12 Hand reamers with parallel shank - adjustable, slotted
  • DIN 212-1:2020-12 Machine reamers with parallel shank - Part 1: Continuous shanks
  • DIN 1898-1:2007-05 Taper pin hole drills - Part 1: Pin hole drills with parallel shank
  • DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
  • DIN 8037:2020-07 Twist drills with parallel shank with carbide tips
  • DIN 1026-2:2002-10 Hot rolled steel channels - Part 2: Parallel flange steel channels; Dimensions, masses and sectional properties
  • DIN 6535:2022-08 Hardmetal parallel shanks for machining tools - Dimensions / Note: Date of issue 2022-07-01*Intended as replacement for DIN 6535 (1992-02).
  • DIN 66349:1983 Interface for parallel measuring data communication; BCD-interface
  • DIN 1880-1:1993 Shell end mills with tenon and parallel key drive; dimensions
  • DIN 81208-25:2006 Manoeuvring of ships - Part 25: Parallel track test/trial
  • DIN 6883:1956 Taper Key Torque Transmission; Parallel Keys, Dimensions and Application
  • DIN 52367:2002 Particleboards - Determination of shear strength parallel to the surface
  • DIN 6518-2:1990-04 Corner rounding concave milling cutters with parallel shank; technical delivery conditions
  • DIN 851:2019-01 T-slot cutters with parallel shanks - Dimensions and technical specifications
  • DIN 844:2023-05 Parallel shank end mills; Dimensions and technical delivery conditions / Note: Date of issue 2023-03-31*Intended as replacement for DIN 844-1 (1989-04), DIN 844-2 (1990-04).
  • DIN EN ISO 8740:1998-03 Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
  • DIN 52185:1976 Testing of wood; compression test parallel to grain
  • DIN 6884:1956 Taper Key Torque Transmission; Gib-head Parallel Keys, Dimensions and Application
  • DIN 212-1:2020 Machine reamers with parallel shank - Part 1: Continuous shanks
  • DIN 52367:2017 Wood-based panels - Determination of shear strength parallel to the surface
  • DIN EN ISO 8740:1998 Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
  • DIN 52367:2017-05 Wood-based panels - Determination of shear strength parallel to the surface
  • DIN 6883:1956-02 Taper Key Torque Transmission; Parallel Keys, Dimensions and Application
  • DIN 6539:1991-05 Continuous parallel shank solid hardmetal twist drills; dimensions
  • DIN 212-2:2011-02 Machine reamers with parallel shanks - Part 2: Stepped shanks
  • DIN 1835-1:2022-08 Parallel shanks made of steel for cutting tools - Part 1: Dimensions / Note: Date of issue 2022-06-24*Intended as replacement for DIN 1835-1 (1999-01).
  • DIN 87303:2000 Squares with tapered and parallel sides for valves for shipboard use
  • DIN 1833-1:1989-04 Inverse dovetail cutters and dovetail cutters with parallel shank; dimensions
  • DIN 55230:1982 Machine tools; guillotine shears with parallel guided knife beam; constructional sizes
  • DIN EN 14086:2003 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method; German version EN 14086:2003

RU-GOST R, parallel

ES-UNE, parallel

Group Standards of the People's Republic of China, parallel

Society of Automotive Engineers (SAE), parallel

工业和信息化部, parallel

国家能源局, parallel

AENOR, parallel

Danish Standards Foundation, parallel

IX-ICAO, parallel

  • ICAO 9643-2004 Manual on Simultaneous Operations on Parallel or Near=Parallel Instrument Runways (SOIR) First Edition; AN/941

NL-NEN, parallel

未注明发布机构, parallel

民政部, parallel

NO-SN, parallel

  • NS 7009-1977 Description pattern for plates, sheets, foils and other parallel plane shapes
  • NS 5012-1977 Parallel involute gears - ISO system of accuracy
  • NS 5320-1977 Hand taps for pipe threads for parallel threads
  • NS 83-1969 Rectangular or square parallel keys and their corresponding keyways
  • NS 1716-1970 Valves and accessories for piping - Handwheels, parallel square hub
  • NS 5341-1977 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

International Organization for Standardization (ISO), parallel

  • ISO 2338:1972 Parallel pins, unhardened — Metric series
  • ISO 9766:1990 Drills with indexable inserts; cylindrical shanks with a parallel flat
  • ISO/CD 13672 Fasteners — Parallel grooved pins — Half-length diamond grooves
  • ISO/DIS 13672:2023 Fasteners — Parallel grooved pins — Half-length diamond grooves
  • ISO 17832:2009 Non-parallel steel wire and cords for tyre reinforcement
  • ISO 9766:2012 Drills with indexable inserts - Cylindrical shanks with a parallel flat
  • ISO 17832:2018 Non-parallel steel wire and cords for tyre reinforcement
  • ISO 1641-1:1978 End mills and slot drills; Part I : Milling cutters with parallel shanks
  • ISO/CD 8739 Fasteners — Parallel grooved pins, with pilot point — Full-length diamond grooves
  • ISO/CD 8740 Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
  • ISO/DIS 8740:2023 Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
  • ISO/DIS 8739:2023 Fasteners — Parallel grooved pins, with pilot point — Full-length diamond grooves
  • ISO/IEC TS 19570:2015 Programming Languages - Technical Specification for C++ Extensions for Parallelism

AGMA - American Gear Manufacturers Association, parallel

  • P84FTM5-1984 Manufacture of Precision Parallel Axis Gears
  • 917-B97-1997 Design Manual for Parallel Shaft Fine-Pitch Gearing

Xinjiang Provincial Standard of the People's Republic of China, parallel

FI-SFS, parallel

UY-UNIT, parallel

U.S. Air Force, parallel

Professional Standard - Urban Construction, parallel

  • CJ 3058-1996 Semi-parallel wire stay cable with tightly covered plastics sheath
  • CJ/T 3058-1996 Semi-parallel wire cables with plastic sheath

Professional Standard - Electron, parallel

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., parallel

Guangdong Provincial Standard of the People's Republic of China, parallel

Professional Standard - Aerospace, parallel

  • QJ 775.1-1983 Small combined die parallel positioning plate
  • QJ 775.2-1983 Small Combination Die Wide Parallel Positioning Plate
  • QJ 774.15-1983 Parallel bar-shaped positioning support for small combination punching die

GM Europe, parallel

  • GME4091-2002 Rechtwinkligkeits- und Parallelit盲tsmessung an Umlenkrollen Measurement of Angularity Parallelism Idler Toothed-Belt Drives English/German
  • GME 4091-2002 Measurement of Angularity Parallelism Idler Toothed-Belt Drives

Professional Standard - Traffic, parallel

  • JT/T 775-2016 Cable of parallel steel wires for large-span cable-stayed bridge
  • JT/T 775-2010 Stay cable of parallel steel wires for large-span cable-stayed bridge

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, parallel

Association Standard - China Gear Manufacturers Asscociation, parallel

BR-ABNT, parallel

Professional Standard - Chemical Industry, parallel

  • HG/T 2151-2011 Technical specifications for rubber parallel-plate plastometers
  • HG/T 2151-1991 Specifications for Rubber Parallel Plate (Williams) Plastometer

国家市场监督管理总局、中国国家标准化管理委员会, parallel

  • GB/T 38256-2019 Test method for optical axis parallelism of multiple optical paths
  • GB/T 40035-2021 Basic requirements for bilingual parallel corpus processing service

American Gear Manufacturers Association, parallel

  • AGMA 915-3A-1999 Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism
  • AGMA 915-3-A99-1999 Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism

SAE - SAE International, parallel

Lithuanian Standards Office , parallel

British Standards Institution (BSI), parallel

  • BS 84:2007 Parallel screw threads of Whitworth form – Requirements
  • BS ISO 17832:2018 Non-parallel steel wire and cords for tyre reinforcement
  • BS ISO 9766:2012 Drills with indexable inserts. Cylindrical shanks with a parallel flat
  • BS ISO 17832:2009 Non-parallel steel wire and cords for tyre reinforcement
  • BS 906-1:1972 Specification for engineers' parallels - Metric units
  • BS 906-2:1972 Specification for engineers' parallels - Imperial units
  • BS EN ISO 2338:1998 Parallel pins of unhardened steel and austenitic stainless steel
  • BS 7241:1990 Specification for IEC 822 VSB: parallel sub-system bus of the IEC 821 VME bus
  • BS PD ISO/IEC TS 19570:2015 Programming Languages. Technical Specification for C++ Extensions for Parallelism
  • BS EN ISO 8734:1998 Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)

AIA/NAS - Aerospace Industries Association of America Inc., parallel

  • NAS883-2013 MIRROR TARGETS@ OPTICAL TOOLING FRONT SURFACE AND PLANO-PARALLEL (Rev 1)
  • NAS883-1982 Mirror Targets - Optical Tooling Front Surface and Plano- Parallel

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., parallel

GOSTR, parallel

  • GOST R 57837-2017 Hot-rolled steel I-beams with parallel edges of flanges. Specifications
  • GOST R ISO 9766-2019 Drills with indexable inserts. Cylindrical shanks with a parallel flat. Basic dimensions

Henan Provincial Standard of the People's Republic of China, parallel

VN-TCVN, parallel

  • TCVN 5220-1990 Metal cutting machines.Methods of parallelism inspection of the axis to plane

Aerospace Industries Association, parallel

  • AIA NAS 883-1982 Mirror Targets - Optical Tooling Front Surface and Plano- Parallel

CU-NC, parallel

  • NC 90-01-65-1989 Standards System for Metrological Assurance. Planoparallel Measures. Methods and Means of Verification
  • NC 43-13-1968 Particle boards and fibre boards Tensile strength parallel to the surface

National Aeronautics and Space Administration (NASA), parallel

  • NASA NACA-RM-E54F11-1954 Experimental heat-transfer and friction coefficients for air flowing through stacks of parallel flat plates

CO-ICONTEC, parallel

National Metrological Verification Regulations of the People's Republic of China, parallel

  • JJG 828-1993 Verification Regulation of Laser Measuring Instrument for Paralleism of Micrometer
  • JJG(化工) 107-1991 Verification Regulations for Rubber Parallel Plate (Williams Type) Plastometer

National Metrological Technical Specifications of the People's Republic of China, parallel

  • JJF 1252-2010 Calibration Specification for Measuring Instrument for Laser Paralleism of Micrometers

ESDU - Engineering Sciences Data Unit, parallel

International Federation of Trucks and Engines, parallel

TR-TSE, parallel

  • TS 3459-1980 WOOD — DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN

Professional Standard - Petrochemical Industry, parallel

  • NB/SH/T 0813-2010 Test method for the apparent viscosity of bitumens using the parallel plate plastometer

Military Standard of the People's Republic of China-General Armament Department, parallel

  • GJB 9561-2018 Plane optical element surface parallel difference interference detection method Plane fitting method

  parallelism, blank parallel, parallel thread, Parallel connector, parallel sample, parallel thread, blank parallel, parallel value, Parallelism, parallel, Parallel handle, Parallel connector, Parallel circle, Parallel measurement, parallel enrichment, Parallel deviation, parallel blank, Parallel range, parallel processing, parallel not parallel.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved