ZH
RU
ES

Shrinkage test mold

Shrinkage test mold, Total:498 items.

In the international standard classification, Shrinkage test mold involves: Plastics, Leather technology, Wood, sawlogs and sawn timber, Products of the textile industry, Electrical accessories, Rubber and plastics products, Equipment for the metallurgical industry, Textile fibres, Rubber, Refractories, Equipment for the chemical industry, Components and accessories for telecommunications equipment, Non-textile floor coverings, Insulating materials, Glass, Testing of metals, Insulation, Earthworks. Excavations. Foundation construction. Underground works, Ceramics, Seals, glands, Fibre optic communications, Compressors and pneumatic machines, Construction materials, Protection against fire, Soil quality. Pedology, Textile machinery, Ventilators. Fans. Air-conditioners, Structures of buildings, Civil engineering in general, Pipeline components and pipelines, Pumps, Hydraulic energy engineering, Petroleum products in general, Clothes, Mechanical testing, Fluid power systems, Thermodynamics and temperature measurements, Hydraulic construction, Raw materials for rubber and plastics, Optical equipment, Radiation measurements, Electricity. Magnetism. Electrical and magnetic measurements, Food products in general, Prepackaged and prepared foods, Special purpose vehicles, Cellular materials, Electrical wires and cables, Coals, Beverages, Solar energy engineering, Analytical chemistry, Gas and steam turbines. Steam engines.


Malaysia Standards, Shrinkage test mold

  • MS 1501-2000 Method of test for measuring shrinkage from mould dimensions of moulded plastics

RU-GOST R, Shrinkage test mold

  • GOST 26288-1984 Leather. Methods of test for shrinkage
  • GOST 12175-1990 Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests
  • GOST 28563-1990 General-purpose mobile compressor station. Methods of testing
  • PNST 47-2015 Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests
  • GOST 27078-2014 Thermoplastics pipes. Longitudinal reversion. Test method and parameters
  • GOST 15113.0-1977 Food concentrates. Rules of acceptance, sampling and preparation of samples
  • GOST 18336-2017 Rigid cellular plastics. Method of test for compressive modulus of elasticity
  • GOST R 51135-2010 Liqueur-vodka products. Acceptance rales and test methods
  • GOST 20073-1981 General-purpose stationary air piston compressors. Acceptance rules and methods of tests

KR-KS, Shrinkage test mold

  • KS F 2203-2023 Test method for shrinkage of wood
  • KS C IEC 60811-1-3-2020 Common test methods for insulating and sheathing materials of electric and optical cables — Part 1-3: General application —Methods for determining the density — Water absorption tests —Shrinkage test
  • KS M ISO 3380-2019 Leather－Physical and mechanical tests－Determination of shrinkage temperature up to 100℃
  • KS C IEC 60811-503-2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 503: Mechanical tests — Shrinkage test for sheaths
  • KS C IEC 60811-503-2018(2023) Electric and optical fibre cables — Test methods for non-metallic materials — Part 503: Mechanical tests — Shrinkage test for sheaths

Korean Agency for Technology and Standards (KATS), Shrinkage test mold

  • KS K 0423-2012 Test method for dimensional change of spun yarn
  • KS L 3303-2007 Testing method for reheat shrinkange of insulating fire bricks
  • KS L 3303-2017 Testing method for reheat shrinkange of insulating fire bricks
  • KS L 3307-2007 Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
  • KS L 3307-1964 Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
  • KS L 3307-1987 Test method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating
  • KS L 4004-1997(2022) Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS F 2203-1994 Method of test for shrinkage of wood
  • KS F 2203-2020 Test method for shrinkage of wood
  • KS F 2203-1999 Method of test for shrinkage of wood
  • KS B ISO 1217:2002 Displacement compressors-Acceptance tests
  • KS B ISO 1217-2002(2012) Displacement compressors－Acceptance tests
  • KS B ISO 1217:2013 Displacement compressors－Acceptance tests
  • KS M ISO 3380:2004 Leather－Physical and mechanical tests－Determination of shrinkage temperature up to 100℃
  • KS K 0602-2001 TESTING METHOD FOR SHRINKAGE OF WOOL CLOTH; RELAXATION METHOD
  • KS F 2305-2022 Test method for shrinkage limit of soils
  • KS K 0602-1986 TESTING METHOD FOR SHRINKAGE OF WOOL CLOTH; RELAXATION METHOD
  • KS L 4004-1997(2017) Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS L 4004-1982 Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS L 4004-1987 Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS K 0812-2001 TESTING METHOD FOR SHRINGKAGE IN LAUNDERING AND DIMENSIONAL RESTORABILITY OF KNIT FABRE(WASH WHEEL METHOD)
  • KS K 0812-1982 TESTING METHOD FOR SHRINGKAGE IN LAUNDERING AND DIMENSIONAL RESTORABILITY OF KNIT FABRE(WASH WHEEL METHOD)
  • KS C IEC 60811-1-3:2020 Common test methods for insulating and sheathing materials of electric and optical cables — Part 1-3: General application —Methods for determining the density — Water absorption tests —Shrinkage test
  • KS L 3303-2017(2022) Testing method for reheat shrinkange of insulating fire bricks
  • KS F 2305-2020 Standard test method for shrinkage limit of soils
  • KS L 3303-1987 Testing method for reheat shrinkange of insulating fire bricks
  • KS K 0474-2001 TESTING METHOD FOR SHRINKAGE IN DRY CLEANING:MACHINE METHOD
  • KS K 0476-1998 TESTING METHOD FOR SHRINKAGE OF TEXTILES : WASCATOR METHOD
  • KS F 2504-2007 Testing method for density and absorption of fine aggregates
  • KS F 2595-2021 Standard test method for drying shrinkage crack in concrete
  • KS F 2503-2007 Testing method for density and absorption of coarse aggregate
  • KS F 2503-1982 Testing method for density and absorption of coarse aggregate
  • KS C IEC 60650:2009 Analogue counting ratemeters-Characteristics and test methods
  • KS L 3117-2015 Testing method for residual linear expansion and contraction of refractory bricks
  • KS L 3117-2010 Testing method for residual linear expansion and contraction of fire brick
  • KS C IEC 60650-2009(2019) Analogue counting ratemeters－Characteristics and test methods
  • KS M ISO 3380:2019 Leather－Physical and mechanical tests－Determination of shrinkage temperature up to 100℃
  • KS K 0600-2001 TESTING METHOD FOR SHRINKAGE IN LAUNDERING (COTTON AND/OR LINEN CLOTH ) : WASH WHEEL METHOD
  • KS K 0600-1987 TESTING METHOD FOR SHRINKAGE IN LAUNDERING (COTTON AND/OR LINEN CLOTH ) : WASH WHEEL METHOD
  • KS K 0600-1979 TESTING METHOD FOR SHRINKAGE IN LAUNDERING (COTTON AND/OR LINEN CLOTH ) : WASH WHEEL METHOD
  • KS C IEC 60811-503:2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 503: Mechanical tests — Shrinkage test for sheaths

Japanese Industrial Standards Committee (JISC), Shrinkage test mold

  • JIS L 1042:1992 Testing methods for shrinkage percentage of woven fabrics
  • JIS R 2613:1985 Testing method for reheat shrinkage of insulating fire bricks
  • JIS R 2208:1976 Test method for permanent linear change of refractory brick on reheating
  • JIS B 8341:2008 Displacement compressors -- Acceptance tests
  • JIS R 2617:1985 Testing method for thermal expansion and shrinkage of insulating fire bricks
  • JIS C 2132:1976 Testing methods of heat shrinkable tubing for electrical insulation
  • JIS A 1209:1990 Test method for shrinkage parameters of soils
  • JIS A 1209:2000 Test method for shrinkage parameters of soils
  • JIS A 1209:2009 Test method for shrinkage parameters of soils
  • JIS L 1057:1992 Testing methods for shrinkage percentage by ironing of woven and knitted fabrics
  • JIS B 7263-5:2021 Test methods for telescopic systems -- Part 5: Test methods for transmittance
  • JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
  • JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
  • JIS K 6557-7:2016 Leather -- Physical and mechanical tests -- Determination of shrinkage temperature
  • JIS B 7263-7:2018 Test methods for telescopic systems -- Part 7: Test methods for limit of resolution
  • JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials

Taiwan Provincial Standard of the People's Republic of China, Shrinkage test mold

  • CNS 14925-2005 Wood - Determination of volumetric shrinkage
  • CNS 459-2005 Wood - Determination of longitudinal, radial and tangential shrinkage
  • CNS 8038-1983 Method of Test for Shrinkage Percentage of Woven Fabrics
  • CNS 12474-1988 Method of Test for Shrinkage Percentage by Ironing of Woven and Knitted Fabrics
  • CNS 8783-1988 Method of Test for Contraction Percentage of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 5263-1986 Method of Test for Shrinkage Factors of Soils
  • CNS 11742-1986 Method of Test for Reheat Shrikage of Insulating Fire Bricks
  • CNS 618-1990 Method of Test for Permanent Linear Change of Refractory Brick on Reheating
  • CNS 8784-1988 Method of Test for Tensile of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 12766-1990 Method of Test for Permanent Linear Change on Castable Refractories
  • CNS 8790-1988 Method of Test for Thermal Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8794-1988 1
  • CNS 8788-1988 Method of Test for Water Absorption of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8793-1988 Method of Test for Combustion Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8795-1988 Method of Test for Copper Corrosion of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8789-1988 Method of Test for Solvent Resistance of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8791-1988 Method of Test for Low-Temperature Characteristics of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8785-1988 Method of Test for Electric Strength of Heat Shrinkable Tubing for Electrical Insulation
  • CNS 8792-1988 Method of Test for Thermal Impact Resistance of Heat Shrinkable Tubing for Electrical Insulation

TR-TSE, Shrinkage test mold

  • TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS
  • TS 3460-1980 PLASTICS - AMORPHOUS THERMOPLASTIC MOULDING MATERIALS — PREPARATION OF TEST SPECIMENS WITH A DEFINED LEVEL OF SHRINKAGE —PART 1: TEST SPECIMENS IN THE FORM OF PARALLELEPIPEDIC BARS (INJECTION MOULDING AND COMPRESSION MOULDING)

American Society for Testing and Materials (ASTM), Shrinkage test mold

  • ASTM D6289-03 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
  • ASTM D2259-02(2016)e1 Standard Test Method for Shrinkage of Yarns
  • ASTM D955-89(1996) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • ASTM D955-00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • ASTM D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • ASTM D2102-02(2007) Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
  • ASTM D2102-02(2018) Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
  • ASTM D7983-17(2022) Standard Test Method for Shrinkage of Carpet Backing Fabrics
  • ASTM D4974-04 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D4974-04(2011) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D6289-13 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
  • ASTM F36-15(2021) Standard Test Method for Compressibility and Recovery of Gasket Materials
  • ASTM C596-01 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • ASTM C596-96e1 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • ASTM C426-06 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM D628-95(1999) Standard Specification for Asbestos Tubular Sleeving
  • ASTM D628-95(2004) Standard Specification for Asbestos Tubular Sleeving
  • ASTM D6289-98 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
  • ASTM D6289-08 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
  • ASTM C326-03 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
  • ASTM C326-09 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
  • ASTM D5591-04 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • ASTM D5591-98a Standard Test Method for Thermal Shrinkage Force of Yarn and Cord Using the Testrite Thermal Shrinkage Force Tester
  • ASTM D5591-02 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • ASTM D5591-04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • ASTM D5591-04(2011) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • ASTM D2732-03 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM D2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM D2259-02(2011) Standard Test Method for Shrinkage of Yarns
  • ASTM D2453-03 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
  • ASTM D2453-15 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
  • ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • ASTM D2259-96 Standard Test Method for Shrinkage of Yarns
  • ASTM D2259-02(2006)e1 Standard Test Method for Shrinkage of Yarns
  • ASTM D2259-02 Standard Test Method for Shrinkage of Yarns
  • ASTM D2259-21 Standard Test Method for Shrinkage of Yarns
  • ASTM D2259-02(2016) Standard Test Method for Shrinkage of Yarns
  • ASTM D4974-99 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D4974-02 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2671-21 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
  • ASTM D6076-03 Standard Test Method for Shrinkage Temperature of Leather
  • ASTM D7983-17 Standard Test Method for Shrinkage of Carpet Backing Fabrics
  • ASTM D6076-18(2023) Standard Test Method for Shrinkage Temperature of Leather
  • ASTM D6076-08(2013) Standard Test Method for Shrinkage Temperature of Leather
  • ASTM D5104-02 Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
  • ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D2102-02 Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
  • ASTM D2102-96 Standard Test Method for Shrinkage of Textile Fiber Bundle Test
  • ASTM D2671-00 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
  • ASTM D2671-00(2007)e1 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
  • ASTM D4974-01 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D4974/D4974M-22 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D4974-04(2016) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • ASTM D1329-08 Standard Test Method for Evaluating Rubber Propertyx2014;Retraction at Lower Temperatures (TR Test)
  • ASTM D2102-02(2012)e1 Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
  • ASTM D1329-16(2021) Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
  • ASTM C1241-00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
  • ASTM D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM C1241-00 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
  • ASTM C1241-14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
  • ASTM D1917-03(2017) Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
  • ASTM D1329-02 Standard Test Method for Evaluating Rubber Property8212;Retraction at Lower Temperatures (TR Test)
  • ASTM D5104-96 Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
  • ASTM C1608-05 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
  • ASTM C1608-12 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
  • ASTM D8042-16 Test Method for Shrinkage Temperature of Wet Blue and Wet White
  • ASTM D8042-18(2023) Test Method for Shrinkage Temperature of Wet Blue and Wet White
  • ASTM D4943-95 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
  • ASTM E434-10(2015) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
  • ASTM C1148-92a(2008) Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
  • ASTM C1608-06 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
  • ASTM D427-04 Test Method for Shrinkage Factors of Soils by the Mercury Method
  • ASTM C1608-07 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
  • ASTM C1148-92a(1997)e1 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
  • ASTM D427-98 Test Method for Shrinkage Factors of Soils by the Mercury Method
  • ASTM C356-03 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  • ASTM D1229-03(2008) Standard Test Method for Rubber Property-Compression Set at Low Temperatures
  • ASTM D2014-97(2004) Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM D4943-02 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
  • ASTM C878/C878M-03 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
  • ASTM D2014-97 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM D2014/D2014M-19 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM D2014/D2014M-20 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM C878/C878M-22 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
  • ASTM C426-22 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM D2014-97(2010) Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM C1608-17 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
  • ASTM D4943-08 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
  • ASTM C426-23 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C642-21 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
  • ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM C426-99 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-05 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C596-07 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • ASTM C596-09 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • ASTM C426-16 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C878/C878M-14 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
  • ASTM C426-15 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-15e1 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM D3493-14 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
  • ASTM D3493-16 Standard Test Method for Carbon Black&x2014;Oil Absorption Number of Compressed Sample (COAN)
  • ASTM C356-87(1997) Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  • ASTM C356-17 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  • ASTM C1579-06(2012) Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
  • ASTM C1579-13 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
  • ASTM C878-95a Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

Professional Standard - Aviation, Shrinkage test mold

  • HB 5350.1-2004 Test method for properties of investment casting pattern materials-Part 1:Determination of linear shrinkage
  • HB 5350.1-1986 Method for determination of linear shrinkage of investment casting mold material
  • HB 5353.2-2004 Test method for properties of investment casting ceramic core-Part 2:Determination of sintered shrinkage
  • HB 5353.2-1986 Method for determination of firing shrinkage of investment casting ceramic cores

International Organization for Standardization (ISO), Shrinkage test mold

  • ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
  • ISO 2921:1975 Title missing - Legacy paper document
  • ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
  • ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
  • ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage
  • ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
  • ISO 1217:1975 Displacement compressors — Acceptance tests
  • ISO 1217:2009 Displacement compressors - Acceptance tests
  • ISO 1217:1986 Displacement compressors; Acceptance tests
  • ISO 1217:1996 Displacement compressors - Acceptance tests
  • ISO/TS 17431:2006 Fire tests - Reduced-scale model box test
  • ISO 2557-1:1976 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injection mouldin
  • ISO 3380:2002 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
  • ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
  • ISO 18740:2016 Turbocompressors - Performance test code - Simplified acceptance test
  • ISO 1217:2009/Amd 1:2016 Calculation of isentropic efficiency and relationship with specific energy
  • ISO 1217:1975/Amd 1:1988 Displacement compressors; acceptance tests; amendment 1
  • ISO 294-4:2001/cor 1:2007 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage TECHNICAL CORRIGENDUM 1 (Second Edition)
  • ISO/DIS 13061-14 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage
  • ISO/DIS 13061-13 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage
  • ISO 3380:2002 | IULTCS/IUP 16 Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 degrees C
  • ISO/TR 19688:2019 Rotodynamic pumps — Hydraulic performance acceptance test using a model pump

British Standards Institution (BSI), Shrinkage test mold

  • BS EN 62329-2:2006 Heat shrinkable moulded shapes - Methods of test
  • BS ISO 1217:1997 Displacement compressors - Acceptance tests
  • BS ISO 1217:2010 Displacement compressors. Acceptance tests
  • BS ISO 1217:2009 Displacement compressors - Acceptance tests
  • BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
  • BS ISO 1217:2009+A1:2016 Displacement compressors. Acceptance tests
  • BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
  • BS EN 12617-2:2005 Products and systems for the protection and repair of concrete structures - Test methods - Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
  • BS EN 12617-2:2004(2005) Products and systems for the protection and repair of concrete structures - Test methods - Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
  • BS ISO 18740:2016 Turbocompressors. Performance test code. Simplified acceptance test
  • BS EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes. Methods of test
  • BS EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of shrinkage and expansion
  • BS EN 60811-503:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for sheaths
  • BS 2782-6 Method 643A:1976 Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications
  • BS EN 60193:1999 Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests
  • BS EN 60193:2006 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
  • BS EN 15429-3:2015 Sweepers. Efficiency of particulate matter collection. Testing and Evaluation
  • BS EN IEC 60794-1-211:2021 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Sheath shrinkage, method F11
  • BS EN ISO 3380:2003 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 degrees C

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Shrinkage test mold

  • GB/T 14235.4-1993 Testing method for linear contraction of pattern materials in investment casting
  • GB/T 6505-2001 Test method for thermal shrinkage of synthetic filament yarns
  • GB/T 6505-2008 Testing method for thermal shrinkage of man-made filament yarns
  • GB/T 43015-2023 Test method for dry heat shrinkage of synthetic short fibers
  • GB/T 13465.5-2009 Test method of contraction of the impermeable graphite phenolic aldehyde agglomerant
  • GB/T 6505-2017 Man-made fiber.Test method for thermal shrinkage of filament yarns (after treatment)
  • GB/T 3853-1998 Displacement compressor--Acceptance tests
  • GB/T 426-1978 Test methods of shrinkage for printed and dyed fabrics
  • GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
  • GB/T 12622-1990 Test method for compressibility and recovery of gaskets for pipe flanges
  • GB/T 12622-2008 Standard test method for compressibility and recovery of gaskets for pipe flanges
  • GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
  • GB/T 11972-1997 Test methods for dry shrinkage of aerated concrete
  • GB/T 30709-2014 Standard test method for compressibility and recovery of laminated composite gasket materials
  • GB/T 34108-2017(英文版) Metallic materials—High strain rate compression test method at ambient temperature
  • GB/T 30312-2013 Test method for thermal shrinkage of yarns and cords
  • GB/T 42900-2023 High temperature compression test method for metallic materials with high strain rate
  • GB/Z 32585-2016 1000MW-class Francis turbine model acceptance test guidelines
  • GB/T 15613-2023 Model acceptance tests of turbines, storage pumps and pump turbines
  • GB/T 20671.2-2006 Classification system and test methods for nonmetallic gasket materials-Part2:Standard test method for compressibility and recovery of gasket materials

Professional Standard - Military and Civilian Products, Shrinkage test mold

  • WJ 750-1994 Test method for shrinkage of glue for optical instruments

Professional Standard - Machinery, Shrinkage test mold

Professional Standard - Textile, Shrinkage test mold

  • FZ/T 50004-2011 Testing method for shrinkage in hot airof polyester staple fibers
  • FZ/T 50004-1991 Test method for dry heat shrinkage of polyester staple fiber
  • FZ 50004-1991 Test method for dry heat shrinkage of polyester staple fiber
  • FZ/T 50050-2020 Test method for dry heat shrinkage of synthetic fiber industrial filament
  • FZ/T 50023-2014 Testing method for different shrinkage of polyester partially oriented/drawn bi-shrinkage filament yarns
  • FZ/T 98016-2017 Fabric Shrinkage Tester Type A
  • FZ/T 20014-1997 Test method of ironing shrinkage for wool fabric

Professional Standard - Chemical Industry, Shrinkage test mold

  • HG/T 2380-1992 Test method for shrinkage of graphite phenolic adhesive

YU-JUS, Shrinkage test mold

  • JUS G.S2.608-1980 Plastics. Thermosetting moulding materials. Determination of shrinkage of compression moulded test specimens in the form of bars

American National Standards Institute （ANSI), Shrinkage test mold

Lithuanian Standards Office , Shrinkage test mold

  • LST EN 1842-2002 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
  • LST 1413.9-1997 Mortar. Testing methods. Determination of shrinkage. expansion deformation
  • LST EN 1367-4-2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
  • LST EN 62329-2-2007 Heat shrinkable moulded shapes - Part 2: Methods of test (IEC 62329-2:2006)

FI-SFS, Shrinkage test mold

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Shrinkage test mold

  • GJB 5873-2006 Determination of the linear shrinkage rate of molded vulcanizate

Military Standard of the People's Republic of China-General Armament Department, Shrinkage test mold

  • GJB 8614-2015 Determination of linear shrinkage of molded vulcanized rubber
  • GJB 17.13-1984 Test methods for aviation wires and cables Shrinkage test

German Institute for Standardization, Shrinkage test mold

  • DIN EN 62329-2:2007 Heat shrinkable moulded shapes - Part 2: Methods of test (IEC 62329-2:2006); German version EN 62329-2:2006
  • DIN 52184:1979 Testing of wood; determination of swelling and shrinkage
  • DIN 53866-4:1979 Testing of textiles; shrinkage of single and plied yarns, determination of shrinkage in steam
  • DIN EN 1842:1997-11 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
  • DIN 50131:1974 Testing of Metallic Materials; Determination of Shrinkage
  • DIN 50131:1974-07 Testing of Metallic Materials; Determination of Shrinkage
  • DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
  • DIN 53464:1962 Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials
  • DIN EN ISO 3380:2003 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2002); German version EN ISO 3380:2002
  • DIN EN 1367-4:2008-06 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:2008
  • DIN 55543-4:2017-03 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
  • DIN EN 12390-16:2019 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
  • DIN EN 12390-16:2019-12 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete; German version EN 12390-16:2019
  • DIN EN 13872:2004-04 Method of test for smoothing and/or levelling compounds - Determination of shrinkage; German version EN 13872:2004
  • DIN 47645:1989 Plastic heat shrinking caps for telecommunication cables; requirements, tests
  • DIN 1945-1:1980-11 Displacement compressor; thermodynamic acceptance and performance test
  • DIN 1945-1:1980 Displacement compressor; thermodynamic acceptance and performance test
  • DIN 52450:1985 Testing of inorganic non-metallic building materials; determination of shrinkage and expansion on small specimens
  • DIN 18122-2:2000 Soil - investigation and testing - Part 2: Determination of the shrinkage limit
  • DIN EN 13872 Corrigendum 1:2004 Methods of test for smoothing and/or levelling compounds - Determination of shrinkage Corrigendum 1 to English version of DIN EN 13872:2004-04
  • DIN EN ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2015); German version EN ISO 3380:2015
  • DIN EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion; German version EN 12617-4:2002

Association Francaise de Normalisation, Shrinkage test mold

  • NF C93-649-2*NF EN 62329-2:2006 Heat shrinkable moulded shapes - Part 2 : methods of test
  • NF EN 1842:1997 Plastiques - Matières à mouler thermodurcissables (SMC-BMC) - Détermination du retrait au moulage par compression.
  • NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
  • NF EN 13872:2004 Méthode d'essai pour les mortiers de lissage et/ou d'égalisation - Détermination du retrait
  • NF E51-260:1998 Displacement compressors. Acceptance tests.
  • NF E51-260*NF ISO 1217:2009 Displacement compressors - Acceptance tests
  • NF EN 12390-16:2019 Essais pour béton durci - Partie 16 : détermination du retrait du béton
  • NF P15-433:1994 Methods of testing cement. Determination of shrinkage and swelling.
  • NF ISO 1217:2009 Compresseurs volumétriques - Essais de réception
  • NF EN 50289-3-4:2001 Câbles de communication - Spécifications des méthodes d'essai - Partie 3-4 : méthodes d'essais mécaniques - Résistance à la traction, allongement et rétraction de l'isolant et de la gaine
  • NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
  • NF C93-537-3-4*NF EN 50289-3-4:2001 Communication cables - Specifications for test methods - Part 3-4 : mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath
  • NF G07-131:1982 Textiles. Testing of fabrics and garnments containing wool. Determination of shrinkage due to felting during washing.
  • NF EN 1367-4:2008 Essais pour déterminer les propriétés thermiques et l'altérabilité des granulats - Partie 4 : détermination du retrait au séchage
  • NF E44-502:1991 Small power hydraulic turbines. Field acceptance test.
  • NF G07-304:1982 Textiles. Tests on textured yarns. Determination of rate of residuel shrinkage.
  • NF E17-401-4:2007 Heat meters - Part 4 : pattern approval tests.
  • NF P18-977-4*NF EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4 : determination of shrinkage and expansion.
  • NF ISO 1217/A1:2016 Compresseurs volumétriques - Essais de réception - Amendement 1 : calcul de du rendement isenthropique et relation avec l'énergie spécifique
  • NF E51-271*NF ISO 18740:2016 Turbocompressors - Performance test code - Simplified acceptance test
  • NF C93-643-201:1993 Spécification pour gaines isolantes souples - Troisième partie : spécifications particulières aux types particuliers de gaines - Feuille 201 : gaine souple thermorétractable en PVC réticule, pour usage général, avec rapport de rétrécissement ...
  • NF B51-020-14*NF ISO 13061-14:2017 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 14 : determination of volumetric shrinkage
  • NF P18-977-2*NF EN 12617-2:2005 Products and systems for the protection and repair of concrete structures - Test methods - Part 2 : shrinkage of crack injection product based on polymer binder : volumetric shrinkage.
  • NF C55-493*NF EN 60193:2000 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
  • NF B51-020-13*NF ISO 13061-13:2017 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 13 : determination of radial and tangential shrinkage
  • NF C32-011-503*NF EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503 : mechanical tests - Shrinkage test for sheaths
  • NF EN 60811-503:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 503 : essais mécaniques - Essai de rétraction des gaines
  • NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
  • NF EN IEC 60193:2019 Turbines hydrauliques, pompes d'accumulation et pompes-turbines - Essais de réception sur modèle
  • NF G52-012*NF EN ISO 3380:2016 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 oC
  • NF EN ISO 2505:2005 Tubes en matières thermoplastiques - Retrait longitudinal à chaud - Méthodes d'essai et paramètres
  • NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
  • NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
  • NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
  • FD E44-174*FD ISO/TR 19688:2019 Rotodynamic pumps - Hydraulic performance acceptance test using a model pump

International Electrotechnical Commission (IEC), Shrinkage test mold

  • IEC 62329-2:2006 Heat shrinkable moulded shapes - Part 2: Methods of test
  • IEC 60497:1976 International code for model acceptance tests of storage pumps
  • IEC 60193:1965 International code for model acceptance test of hydraulic turbines
  • IEC 62677-2:2017 Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test
  • IEC 60650:1979 Analogue counting ratemeters. Characteristics and test methods
  • IEC 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
  • IEC 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
  • IEC TS 63106-2:2022 Simulators used for testing of photovoltaic power conversion equipment - Recommendations - Part 2: DC power simulators
  • IEC TS 63106-1:2020 Simulators used for testing of photovoltaic power conversion equipment - Recommendations - Part 1: AC power simulators
  • IEC 60193:1999 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
  • IEC 60193/AMD1:1977 International code for model acceptance test of hydraulic turbines

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Shrinkage test mold

  • GB/T 34848-2017 Determination of shrinkage character for heat-shrinkable films
  • GB/T 31334.4-2016 Test methods for dipped canvas—Part 4:Hot air thermal shrinkage
  • GB/T 3853-2017 Displacement compressors—Acceptance tests
  • GB/T 34645-2017 Contractile strain ratio testing of metal materials tubing
  • GB/T 34108-2017 Metallic materials—High strain rate compression test method at ambient temperature

CH-SNV, Shrinkage test mold

国家市场监督管理总局、中国国家标准化管理委员会, Shrinkage test mold

  • GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
  • GB/T 38711-2020 Test method for reheating shrinkage of ultrathin glass—Laser method
  • GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method

Danish Standards Foundation, Shrinkage test mold

  • DS/EN 1842:1998 Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage
  • DS/EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
  • DS/EN 62329-2:2007 Heat shrinkable moulded shapes - Part 2: Methods of test
  • DS/EN 13872:2004 Method of test for smoothing and/or levelling compounds - Determination of shrinkage
  • DS/EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
  • DS/EN 60193:2001 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
  • DS/EN ISO 3380:2003 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 degrees C
  • DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
  • DS/EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations

Professional Standard - Water Conservancy, Shrinkage test mold

IN-BIS, Shrinkage test mold

CEN - European Committee for Standardization, Shrinkage test mold

  • EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
  • EN ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100° C
  • PREN 12390-16-2018 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete

European Committee for Standardization (CEN), Shrinkage test mold

  • EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
  • EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
  • EN ISO 3380:2002 Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 degrees C ISO 3380: 2002
  • EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion
  • prEN 480-3-1991 Admixtures for concrete, mortar and grout; test methods; part 3: determination of shrinkage and expansion

SE-SIS, Shrinkage test mold

(U.S.) Ford Automotive Standards, Shrinkage test mold

AR-IRAM, Shrinkage test mold

PL-PKN, Shrinkage test mold

BE-NBN, Shrinkage test mold

ZA-SANS, Shrinkage test mold

  • SANS 3380:2010 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
  • SANS 6085:2006 Concrete tests - Initial drying shrinkage and wetting expansion of concrete
  • SANS 3001-GR10:2008 Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage

AENOR, Shrinkage test mold

  • UNE-EN 1367-4:2009 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
  • UNE-EN 13872:2004 Method of test for smoothing and/or levelling compounds - Determination of shrinkage
  • UNE-EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
  • UNE-EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
  • UNE-EN 50289-3-4:2001 Communication cables - Specifications for test methods -- Part 3-4: Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath.
  • UNE-EN 60193:2002 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.

Standard Association of Australia （SAA）, Shrinkage test mold

Indonesia Standards, Shrinkage test mold

HU-MSZT, Shrinkage test mold

RO-ASRO, Shrinkage test mold

  • STAS 2833-1980 Tests of concretes. DETERMINAT ION OF AXIAL SHRINKAGE OF HARDENED CONCRETE
  • STAS 11388/6-1984 CABLES AND CORDS METHODS OF TEST Methods for determining the density, water absorption tests and shrinkage test

IT-UNI, Shrinkage test mold

未注明发布机构, Shrinkage test mold

  • BS EN 1367-4:2008(2009) Tests for thermal and weathering properties of aggregates Part 4 : Determination of drying shrinkage
  • BS EN 60811-1-3:1995(2002) Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1 - 3 : General application — Methods for determining the density — Water absorption tests — Shrinkage test
  • BS 2782-6-method 643A:1976(1999) Methods of testing Plastics — Part 6 : Dimensional properties — Method 643A : Shrinkage on heating of film intended for shrink wrapping applications
  • BS 1571-2:1975(2009) Specification for Testing ofpositive displacement compressors and exhausters — Part 2 : Methods for simplified acceptance testing for air compressors and exhausters

National Metrological Technical Specifications of the People's Republic of China, Shrinkage test mold

National Metrological Verification Regulations of the People's Republic of China, Shrinkage test mold

NO-SN, Shrinkage test mold

  • NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit

ES-UNE, Shrinkage test mold

  • UNE-EN 12390-16:2020 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
  • UNE-EN 62329-2:2006 Heat shrinkable moulded shapes -- Part 2: Methods of test (IEC 62239-2:2006). (Endorsed by AENOR in February of 2007.)
  • UNE-EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test (Endorsed by Asociación Española de Normalización in March of 2018.)

ES-AENOR, Shrinkage test mold

The American Road & Transportation Builders Association, Shrinkage test mold

  • AASHTO T 92-1997(R2009) Standard Method of Test for Determining the Shrinkage Factors of Soils
  • AASHTO T 85-2010 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • AASHTO T 85-2013 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • AASHTO T 85-2014 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • AASHTO T 85-2021 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • AASHTO T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems

AASHTO - American Association of State Highway and Transportation Officials, Shrinkage test mold

  • T 92-1997 Standard Method of Test for Determining the Shrinkage Factors of Soils
  • T 85-2013 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • T 85-2014 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • T 85-2010 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • T 85-2008 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
  • T92-1997 Standard Method of Test for Determining the Shrinkage Factors of Soils (Twentieth Edition)

CENELEC - European Committee for Electrotechnical Standardization, Shrinkage test mold

  • EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
  • EN 60995:1994 Determination of the Prototype Performance from Model Acceptance Test of Hydraulic Machines with Consideration of Scale Effects
  • EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations

工业和信息化部, Shrinkage test mold

  • YS/T 1551-2022 Room temperature high strain rate compression test method for titanium alloys

TH-TISI, Shrinkage test mold

  • TIS 110-1974 Standard method of test for drying shrinkage of concrete block

Professional Standard - Light Industry, Shrinkage test mold

  • QB/T 2713-2005 Leather-Physical and mechanical tests-Determination of shrinkage temperature
  • QB/T 1271-2012 Fur.Physical and mechanical tests.Determination of shrinkage temperature

IX-SA, Shrinkage test mold

GM North America, Shrinkage test mold

  • GM GM9753P-1991 Tensile and Shrinkage Test for Expanding Adhesives and Sealers

CZ-CSN, Shrinkage test mold

  • CSN 46 5732-1963 Peats and peat moulds. Sampling, testing and acceptance
  • CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests

Association of German Mechanical Engineers, Shrinkage test mold

  • VDI 2045 Blatt 2-1993 Acceptance and performance tests on turbo compressors and displacement compressors; theory and examples

Professional Standard - Energy, Shrinkage test mold

  • NB/T 11004-2022 Regulations for model acceptance tests of hydraulic turbines and pump turbines

SG-SPRING SG, Shrinkage test mold

  • SS 323 Pt.F2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F2 : Determination Of Unrestrained Linear Thermal Shrinkage

European Committee for Electrotechnical Standardization（CENELEC）, Shrinkage test mold

  • EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
  • EN IEC 60193:2019 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests

Group Standards of the People's Republic of China, Shrinkage test mold

  • T/CSTM 00244-2021 Metallic materials – Method of physical simulation tests – Part 1： Hot axisymmetric compression testing

NZ-SNZ, Shrinkage test mold

  • NZS 4402.2.6:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.6: Determination of the Linear Shrinkage

VN-TCVN, Shrinkage test mold

  • TCVN 7125-2007 Leather.Physical and mechanical tests.Determination of shrinkage temperature up to 100 degrees C

  Product shrinkage test, Shrinkage test, Shrinkage test mold, Shrinkage test, Free shrinkage test, Shrinkage Ratio Test, Test method for shrinkage of glue for optical instruments, Standard test method for hot-air heat shrinkage of yarn and rope using a heat-shrinkage oven, Shrinkage measurement test.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved