ZH
RU
ES

Bending strength

Bending strength, Total:379 items.

In the international standard classification, Bending strength involves: Footwear, Wood, sawlogs and sawn timber, Vibrations, shock and vibration measurements, Construction materials, Rubber, Mining and quarrying, Ceramics, Glass, Wood-based panels, Semi-manufactures of timber, Paper and board, Kitchen equipment, Solar energy engineering, Piezoelectric and dielectric devices, Gears, Structures of buildings, Measurement of force, weight and pressure, Medical equipment, Leather technology, Inorganic chemicals, Elements of buildings, Adhesives, Materials for aerospace construction, Technical drawings, Seals, glands, Rubber and plastics products, Electromechanical components for electronic and telecommunications equipment, Cellular materials, Aerospace electric equipment and systems, Miscellaneous domestic and commercial equipment, Integrated circuits. Microelectronics, Iron and steel products, Materials for the reinforcement of composites, Mechanical testing, Powder metallurgy, Refractories, Products of the textile industry, Products of the chemical industry.

CZ-CSN, Bending strength

CSN ON 49 0193-1967 Bending strenght
CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
CSN 73 1353-1976 Determiiiation of tensilo and flexui al strengths of cellular concreto
CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination

(U.S.) Ford Automotive Standards, Bending strength

FORD FLTM BS 005-1-2000 FLEXURAL STRENGTH OF PAPER BOARD

Indonesia Standards, Bending strength

SNI 12-0565-1989 Bending strength test of shoes
SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

AASHTO - American Association of State Highway and Transportation Officials, Bending strength

DIVISION I 9.17-1996 Flexural Strength (Interim 1997; Interim 1998)
T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

SE-SIS, Bending strength

SIS SS 83 10 16-1989 Gutters - Determination of bending strength
SIS 23 51 06-1964 Fibre building boards. Determination of bending strength
SIS SS 13 73 08-1982 Autoclaved aerated concrete - Determination of bending strength

Taiwan Provincial Standard of the People's Republic of China, Bending strength

CNS 13976-1997 Method of test for flexural strength of dimensional stone
CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
CNS 14387-1999 Method of test for bending strength of fine ceramic joint
CNS 12701-1990 Method of Test for Flexural Strength ( Modulus of Rupture ) of High Performance Ceramics
CNS 13382-19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 13382.19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates

AENOR, Bending strength

UNE 83509:2004 CONCRETE WITH FIBERS. FLEXURE STRENGTH
UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE 67037:1999 HOLLOW CLAY BLOCKS FOR FLOORS. FLEXURE STRENGHT TEST.
UNE-EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
UNE-EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
UNE 56537:1979 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHT AGAINST STATIC FLEXION.
UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bending strength

GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
GB/T 4741-1999 Standard test method for bending strength of ceramic materials
GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
GB/T 14390-2008 Fine ceramics (advanced ceramics,advanced technical ceramics).Test methos for flexural strength of monolithic ceramics at elevated temperature
GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 39011.3-2020 Mechanical pencils for technical drawings-Part 3: Black leads-Bending strengths of HB leads
GB/T 39542.3-2020 Mechanical pencils for technical drawings—Part 3:Black leads—Bending strengths of HB leads
GB/T 42895-2023 Bending strength test method of microelectromechanical system (MEMS) technology silicon-based MEMS microstructure
GB/T 14208-1993 Textile glass--Rovings--Determination of flexural strength of rod composites
GB/T 10062.3-2003 Calculation of load capacity of bevel gear--Part 3:Calculation of tooth root strength
GB/T 9966.2-2001 Test methods for natural facing stones Part 2: Dry and wet test methods for flexural strength
GB/T 9966.2-2020 Test methods for natural stone—Part 2:Determination of dry,wet and after freezing flexural strength

TR-TSE, Bending strength

TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2477-1976 Wood - Determination of Impact Bending Strength

Professional Standard - Chemical Industry, Bending strength

HG/T 3844-2008 Ebonite.Determination of cross breaking strength

RU-GOST R, Bending strength

GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST ISO 9585-2011 Implants for surgery. Determination of bending strength and stiffness of bone plates
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending
GOST 18228-1994 Sintered metal materials excluding hard metals. Determination of transverse rupture strength
GOST 18228-1985 Powder metallurgy. Determination of bending strength limit

Association Francaise de Normalisation, Bending strength

NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF EN ISO 5402-2:2018 Cuir - Détermination de la résistance à la flexion - Partie 2 : méthode de flexion d'empeigne
NF EN ISO 5402-1:2022 Cuir - Détermination de la résistance à la flexion - Partie 1 : méthode au flexomètre
NF P19-105*NF EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete.
NF EN ISO 17694:2016 Chaussures - Méthodes d'essai pour les tiges et les doublures - Résistance à la flexion
NF P18-430-5:2012 Testing hardened concrete - Part 5 : flexural strength of test specimens.
NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
NF E04-707-3:1994 Mechanical pencils. Part 3 : black leads. Bending strengths of hb leads.
NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
NF EN ISO 10545-4:2019 Carreaux et dalles céramiques - Partie 4 : détermination de la résistance à la flexion et de la force de rupture
NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
NF ISO 2493-2:2020 Papier et carton - Détermination de la résistance à la flexion - Partie 2 : rigidimètre Taber
NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass
NF ISO 22389-2:2020 Structures en bois - Résistance à la flexion des poutres en I - Partie 2 : performances des composants et exigences de production
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF E23-030-3*NF ISO 6336-3:2020 Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength
NF EN ISO 17138:2022 Céramiques techniques - Propriétés mécaniques des composites céramiques à température ambiante - Détermination de la résistance en flexion
NF EN 3745-512:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 512 : résistance à la flexion
NF E23-030-3:2006 Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength.
NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
NF L54-002-059*NF EN 2591-416:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416 : contact bending strength
NF EN 12789:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous air à pression atmosphérique - Détermination de la résistance en flexion
NF EN 12788:2006 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous atmosphère inerte - Détermination de la résistance en flexion
NF EN 843-1:2007 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 1 : détermination de la résistance à la flexion

Lithuanian Standards Office , Bending strength

LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 538-2000 Clay roofing tiles for discontinuous laying - Flexural strength test
LST EN 12390-5-2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 843-1-2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
LST EN 2591-416-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength

Danish Standards Foundation, Bending strength

DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS/EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
DS/EN 12390-5:2013 Testing hardened concrete - Part 5: Flexural strength of test specimens
DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
DS/EN 2591-416:2002 Aerospace series - Elements of electrical and optical connetion - Test methods - Part 416: Contact bending strength

German Institute for Standardization, Bending strength

DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:1999
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 538:1994-11 Clay roofing tiles for discontinuous laying - Flexural strength test; German version EN 538:1994
DIN EN 12390-5:2019 Testing hardened concrete - Part 5: Flexural strength of test specimens
DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
DIN EN 12390-5:2019-10 Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2019
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
DIN EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000
DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
DIN EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:2016
DIN EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000
DIN 51030:2015-01 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
DIN EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN 51030:2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN 17468-1:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets; German and English version prEN 17468-1:2020
DIN EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
DIN EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens; English version of DIN EN 12390-5:2009-07
DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
DIN EN 17468-1:2022-09 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets; German version EN 17468-1:2022
DIN EN 17468-2:2022-09 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German version EN 17468-2:2022
DIN EN 843-1:2008-08 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006

国家市场监督管理总局、中国国家标准化管理委员会, Bending strength

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 37781-2019 Test methods for bending strength of glass
GB/T 3480.3-2021 Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength

Korean Agency for Technology and Standards (KATS), Bending strength

KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS P ISO 9585:2010 Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585-2010(2016) Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585:2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS G ISO 9177-3:2002 Mechanical pencils-Part 3:Black leads-Bending strengths of HB leads
KS F 2232-2016 Testing method for bending strength of polystyrene composite wood wool cement boards
KS G ISO 9177-3:2014 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS G ISO 9177-3:2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS A ISO 9177-3:2002 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS G ISO 9177-3-2017(2022) Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS B ISO 6336-3-2015(2020) Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
KS B ISO 6336-3:2006 Calculation of load capacity of spur and helical gears-Part 3:Calculation of tooth bending strength
KS B ISO 6336-3:2015 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS L ISO 17565-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for flexural strength of monolithic ceramics at elevated temperature
KS M ISO 3597-2-2012(2017) Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
KS L ISO 17565:2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for flexural strength of monolithic ceramics at elevated temperature
KS L ISO 14704:2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature

AT-ON, Bending strength

ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells
ONORM B 4650 Teil.4-1977 Steel structures; buckling of circular cylindrical Shells
ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM B 4650 Teil.5-1980 Steel structures; buckling of circular cylindrical Shells with gradually varying thickness
OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load

RO-ASRO, Bending strength

STAS 9966-1974 HARDBOARD Determination of static bending slrength
STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 6084-1985 FINISHED LEATHERS Strength determination at repeated flexion of leather and coating

International Organization for Standardization (ISO), Bending strength

ISO 3348:1975 Wood; Determination of impact bending strength
ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates
ISO 9177-3:1994 Mechanical pencils - Part 3: Black leads - Bending strengths of HB leads
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 22389-1:2010 Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
ISO 9177-3:2022 Mechanical pencils for technical drawings — Part 3: Black leads — Bending strengths of HB leads
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
ISO 6336-3:1996 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
ISO 6336-3:2019 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
ISO 17565:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
ISO 14704:2000 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature

PL-PKN, Bending strength

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne

IPC - Association Connecting Electronics Industries, Bending strength

IPC TM-650 2.4.4.1A-1994 Flexural Strength of Laminates (at Elevated Temperature)
IPC TM-650 2.4.4B-1994 Flexural Strength of Laminates (at Ambient Temperature)

Japanese Industrial Standards Committee (JISC), Bending strength

JIS A 1106:1993 Method of test for flexural strength of concrete
JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
JIS B 1759:2013 Estimation of tooth bending strength of cylindrical plastic gears
JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature

Professional Standard - Building Materials, Bending strength

JC/T 676-1997 Test method for flexure of glass material
JC/T 263-1993 Performance test method for cast stone products. Bending strength test

European Committee for Standardization (CEN), Bending strength

prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
EN 1052-2:1999 Methods of Test for Masonry - Part 2: Determination of Flexural Strength
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 12372:2006 Natural stone test methods - Determination of flexural strength under concentrated load
FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions (Incorporates Amendment A1: 2013)
EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
EN 10268:1998 Cold-Rolled Flat Products Made of High Yield Strength Micro-Alloyed Steels for Cold Forming - General Delivery Conditions Ratified European Text
EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
EN 1052-2:2016/AC:2016 Methods of test for masonry - Part 2: Determination of flexural strength
EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength
FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
DD ENV 820-1-1993 Advanced Technical Ceramics - Monolithic Ceramics - Thermomechanical Properties - Part 1: Determination of Flexural Strength at Elevated Temperatures

Society of Automotive Engineers (SAE), Bending strength

SAE TS356-1-1987 TS356 Test for Electrical Connectors Contact Bending Strength
SAE AMS3777/9B-1995 Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 3000 (13,345 N) Breaking Strength
SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
SAE AMS6386C-2000 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
SAE AMS5857A-2000 Steel, Corrosion Resistant, Bars and Wire 19Cr 10Ni (SAE 30304) High Yield Strength Solution Heat Treated and Cold Worked

British Standards Institution (BSI), Bending strength

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
BS EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
BS EN 12390-5:2009 Testing hardened concrete Part 5: Flexural strength of test specimens
BS EN 12390-5:2019 Tracked Changes. Testing hardened concrete. Flexural strength of test specimens
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 12372:2006 Natural stone test methods — Determination of flexural strength under concentrated load
BS EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions
BS EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS EN 658-3:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength
BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
BS ISO 6336-3:1997 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS ISO 6336-3:1996 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength - Corrigendum 1
BS EN 17468-1:2022 Fibre cement products. Determination of pull through and shear resistance and bending strength calculations - Flat sheets
BS EN 17468-2:2022 Fibre-cement products. Determination of pull through and shear resistance and bending strength calculations - Profiled sheets
BS EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength
BS EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
BS 3531 Sec.23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with small test surface areas
BS EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with large test surface areas
18/30377016 DC BS ISO 6336-3. Calculation of load capacity of spur and helical gears. Part 3. Calculation of tooth bending strength

未注明发布机构, Bending strength

BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 1881-118:1983(1998) Testing concrete — Part 118 : Method for determination of flexural strength
DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength
BS ISO 6336-3:2019(2020) Calculation of load capacity of spur and helical gears Part 3 : Calculation of tooth bending strength
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

VN-TCVN, Bending strength

TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength

American Society for Testing and Materials (ASTM), Bending strength

ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

Professional Standard - Aerospace, Bending strength

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

Standard Association of Australia （SAA）, Bending strength

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.10(Int):2001 Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 degrees Celsius or boiling temperature

Group Standards of the People's Republic of China, Bending strength

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen

ZA-SANS, Bending strength

SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete
SANS 9177-3:2009 Mechanical pencils Part 3: Black leads - Bending strengths of HB leads

Professional Standard - Aviation, Bending strength

HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
HB 5434.6-2004 Test methods for aircraft wheel friction materials-Part 6:Test method for bend strength

TH-TISI, Bending strength

TIS 1683-1998 Implants for surgery.determination of bending strength and stiffness of bone plates

KR-KS, Bending strength

KS P ISO 9585-2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS A ISO 9177-3-2002 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS G ISO 9177-3-2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS G ISO 9177-3-2023 Mechanical pencils for technical drawings — Part 3: Black leads — Bending strengths of HB leads
KS L ISO 14704-2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS M ISO 12986-2-2016 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 2：Determination of flexural strength by the foru-point method

American Gear Manufacturers Association, Bending strength

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
AGMA 91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
AGMA 2003-B97-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth
AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth

AGMA - American Gear Manufacturers Association, Bending strength

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods
13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
218.01-1982 Standard for Rating the Pitting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth
908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur@ Helical and Herringbone Gear Teeth

Professional Standard - Medicine, Bending strength

YY/T 0342-2002 Implants for surgery----Determination of bending strength and stiffness of bone plates

国家药监局, Bending strength

YY/T 0342-2020 Implants for surgery----Determination of bending strength and stiffness of bone plates

CEN - European Committee for Standardization, Bending strength

PREN 12390-5-2017 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 12372:1999 Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Load

Guangdong Provincial Standard of the People's Republic of China, Bending strength

DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength

ES-UNE, Bending strength

UNE-EN 12390-5:2020 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
UNE-EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength (Endorsed by AENOR in January of 2007.)
UNE-EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength. (Endorsed by AENOR in April of 2002.)
UNE-EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bending strength

GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength

IN-BIS, Bending strength

工业和信息化部, Bending strength

JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Bending strength

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

The American Road & Transportation Builders Association, Bending strength

AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

NZ-SNZ, Bending strength

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

IT-UNI, Bending strength

EC 1-2020 UNI ISO 6336-3:2020 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
UNI 4818-P14-1974

NL-NEN, Bending strength

NVN-ENV 658-3-1992 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 3: Determination of flexural strength

Professional Standard - Electron, Bending strength

SJ/T 11833.4-2022 Cover glass for mobile display devices Part 4: Mechanical test methods Biaxial bending strength (ring to ring)