ZH
RU
ES
Fracture toughness
Fracture toughness, Total:376 items.
In the international standard classification, Fracture toughness involves: Conducting materials, Testing of metals, Ceramics, Plastics, Textile fibres, Non-ferrous metals, Powder metallurgy, Welding, brazing and soldering, Pipeline components and pipelines, Cutting tools, Nuclear energy engineering, Materials for the reinforcement of composites, Paper and board, Reinforced plastics, Products of non-ferrous metals, Materials for aerospace construction, Rubber and plastics products, Glass, Test conditions and procedures in general, Waxes, bituminous materials and other petroleum products, Lifting equipment, Construction materials, Mechanical testing.
WRC - Welding Research Council, Fracture toughness
- BULLETIN 486-2003 INDEXING FRACTURE TOUGHNESS DATA
- BULLETIN 458-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: APPLICATION OF MASTERCURVE FRACTURE TOUGHNESS METHODOLOGY FOR FERRITIC STEELS
- BULLETIN 457-2000 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: FRACTURE TOUGHNESS OF FERRITIC STEELS AND ASTM REFERENCE TEMPERATURE (TA)
- BULLETIN 205-1975 FRACTURE TOUGHNESS AND RELATED CHARACTERISTICS OF THE CRYOGENIC NICKEL STEELS
- BULLETIN 375-1992 THE SIGNIFICANCE OF THE A/W RATIO ON FRACTURE TOUGHNESS OF A-36 STEEL
- BULLETIN 403-1995 METALLURGICAL AND FRACTURE TOUGHNESS STUDIES OF A516-70 STEEL: )METALLURGICAL CHARACTERIZATION OF THE HAZ IN A516-70 AND EVALUATION OF FRACTURE TOUGHNESS SPECIMENS ; II)COMPARISON OF THE CTOD FRACTURE
- BULLETIN 345-1989 ASSESSING FRACTURE TOUGHNESS AND CRACKING SUSCEPTIBILITY OF STEEL WELDMENTS - A REVIEW
- BULLETIN 266-1981 WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 1: WELD SIMULATION TESTING ; WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 2: WIDE PLATE TESTING
- BULLETIN 459-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: MASTER CURVE STRATEGIES FOR RPV ASSESSMENT
- BULLETIN 261-1980 EFFECTS OF POROSITY ON THE FACTURE TOUGHNESS OF 5083@ 5456@ AND 6061 ALUMINUM ALLOY WELDMENTS
- BULLETIN 140-1969 FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL ALUMINUM ALLOYS
- BULLETIN 413-1996 DEVELOPMENT OF CRITERIA FOR ASSESSMENT OF REACTOR VESSELS WITH LOW UPPER SHELF FRACTURE TOUGHNESS
- BULLETIN 528- DEVELOPMENT OF MATERIAL FRACTURE TOUGHNESS RULES FOR ASME B&PV CODE SECTION VIII DIVISION 2
- BULLETIN 134-1968 PROCEDURES FOR FRACTURE TOUGHNESS CHARACTERIZATION AND INTERPRETATIONS TO FAILURE-SAFE DESIGN FOR STRUCTURAL TITANIUM ALLOYS
- BULLETIN 130-1968 ADVANCES IN FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND IN QUANTITATIVE INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL STEELS
- BULLETIN 358-1990 THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTURE TOUGHNESS OF A HIGH-STRENGTH LOW-STRAIN HARDENING STEEL
- BULLETIN 279-1982 WELDABILITY AND FRACTURE TOUGHNESS OF QUENCHED AND TEMPERED 9% NICKEL STEEL: PART I – WELD SIMULATION TESTING; AND PART II – WIDE PLATE TESTING
- BULLETIN 351-1990 AN ANALYTICAL COMPARISON OF SHORT CRACK AND DEEP CRACK CTOD FRACTURE SPECIMENS OF AN A36 STEEL ; THE EFFECTS OF CRACK DEPTH ON ELASTIC-PLASTIC CTOD FRACTURE TOUGHNESS; A COMPARISON OF THE J-INTEGRAL A
- BULLETIN 120-1967 THE PROPERTIES AND MICROSTRUCTURE OF SPRAY-QUENCHED THICK-SECTION STEELS;DETERMINATION OF FRACTURE TOUGHNESS OF HEAVY-SECTION PRESSURE VESSEL STEELS USING A FRACTURE MECHANICS APPROACH; NOTCH PROPERT
- BULLETIN 418-1997 CONSTRAINT EFFECTS ON FRACTURE BEHAVIOR: I) THE EFFECT OF CRACK DEPTH (A) AND CRACK-DEPTH TO WIDTH RATIO (A/W) ON THE FRACTURE TOUGHNESS OF A533-B STEEL ; II) AN ANALYTICAL INVESTIGATION OF THE EFFECT
American Welding Society (AWS), Fracture toughness
- WRC 457:2000 Fracture Toughness Master Curve Development: Fracture Toughness Of Ferritic Steels And ASTM Reference Temperature (To)
- WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels
- WRC 577:2020 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region
- WRC 540:2014 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region
- WRC 205:1975 Fracture Toughness and Related Characteristics of the Cryogenic Nickel Steels
- WRC 459:2001 Fracture Toughness Master Curve Development: Strategies For RPV Assessment
- WRC 375:1992 The Significance Of The a/W Ratio On Fracture Toughness Of A-36 Steel
- WRC 345:1989 Assessing Fracture Toughness And Cracking Susceptibility Of Steel Weldments - A Review
- WRC 140:1969 Fracture Toughness Characterization Procedures and Interpretations to Fracture-Safe Design for Structural Aluminum Alloys
- WRC 261:1980 Effects of Porosity on the Facture Toughness of 5083, 5456, and 6061 Aluminum Alloy Weldments
- WRC 134:1968 Procedures For Fracture Toughness Characterization and Interpretations to Failure-Safe Design for Structural Titanium Alloys
- WRC 130:1968(1976) Advances in Fracture Toughness characterization Procedures and in Quantitative Interpretations to Fracture-Safe Design for Structural Steels
- WRC 528:2010 Development Of Material Fracture Toughness Rules For ASME B&PV Code Section VIII, Division 2
- WRC 279:1982 Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation Testing
- WRC 266:1981 Part 1: Weldability and Fracture Toughness of 5% Ni Steel-Part 1: Weld Simulation Testing
- WRC 358:1990 The Effect Of Crack Depth To Specimen Width Ratio On The Elastic-Plastic Fracture Toughness Of A High-Strength Low-Strain Hardening Steel
- WRC 413:1996 Development of Criteria for Assessment of Reactor Vessels with Low Upper Shelf Fracture Toughness: Part 1 & Part 2
ESDU - Engineering Sciences Data Unit, Fracture toughness
国家市场监督管理总局、中国国家标准化管理委员会, Fracture toughness
- GB/T 38338-2019 Test method for fracture toughness of carbon materials
- GB/T 38769-2020 Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
- GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method
IPC - Association Connecting Electronics Industries, Fracture toughness
Association Francaise de Normalisation, Fracture toughness
- NF ISO 3060:2017 Fibres de coton- Détermination de la ténacité de rupture des faisceaux plats
- NF G07-080:1972 Method for determination of breaking tenacity of flat bundles of cotton fibers.
- NF A03-180:2006 Metallic materials - Determination of plane-strain fracture toughness.
- NF EN ISO 20501:2022 Céramiques techniques - Analyse statistique de Weibull des données de résistance à la rupture
- NF G07-307:1987 Textiles - Essais des fibres - Détermination de la ténacité de rupture des faisceaux de fibres de laine.
- NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
- NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
- NF EN ISO 18756:2005 Céramiques techniques - Détermination de la ténacité à la rupture des céramiques monolithiques à température ambiante par fissuration superficielle en flexion
- XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- NF EN ISO 24370:2023 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette entaillée en chevron
- NF L17-025*NF EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I GIC
- NF EN ISO 23146:2016 Céramiques techniques - Méthodes d'essai pour la détermination de la ténacité à la rupture des céramiques monolithiques - Méthode sur éprouvette à entaille en V sur une seule face (Méthode SEVNB)
- NF L17-026*NF EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- NF EN 6033:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode I - GIC
- NF EN 6034:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC
- NF EN ISO 15732:2005 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette préfissurée sur une seule face (méthode SEPB)
- NF B41-220-3*NF EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3 : chevron notched beam (CNB) method.
- NF B43-212*NF EN ISO 23146:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method
- NF ISO 15024:2002 Composites plastiques renforcés de fibres - Détermination de la ténacité à la rupture interlaminaire en mode I, Gic, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles
British Standards Institution (BSI), Fracture toughness
- PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
- BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
- BS EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
- BS EN ISO 12737:2011 Metallic materials. Determination of plane-strain fracture toughness
- BS EN ISO 12737:2006 Metallic materials. Determination of plane-strain fracture toughness
- BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
- BS ISO 23524:2022 Plastics. Determination of fracture toughness of films and thin sheets. Essential work of fracture (EWF) method
- 22/30389141 DC BS ISO 23524. Plastics. Determination of fracture toughness of films and thin sheets: the essential work of fracture (EWF) method
- BS ISO 27306:2010 Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
- BS ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
- PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
- BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
- BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- BS ISO 17281:2002 Plastics - Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s)
- 17/30290146 DC BS ISO 18485. Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
- 15/30293838 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
- 20/30394397 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
- BS EN ISO 15653:2018 Tracked Changes. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
- BS ISO 26843:2015 Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
- BS ISO 27306:2016 Tracked Changes. Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
- BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
- BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
- BS DD CEN/TS 14425-3:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3:Chevron notched beam (CNB) method
- BS DD CEN/TS 14425-3:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
- BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
- BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
- DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
- BS ISO 13586:2000 Plastics - Determination of fracture toughness (Gic and Kic) - Linear elastic fracture mechanics (LEFM) approach
- BS ISO 13586:2018 Plastics. Determination of fracture toughness (GIC and KIC). Linear elastic fracture mechanics (LEFM) approach
- BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 14425-5:2004 Advanced technical ceramics-Test methods for determination of fracture toughness of monolithic ceramics-Part 5:Single-edge vee-notch beam (SEVNB) method
- BS DD CEN/TS 14425-5:2005 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
- BS ISO 21113:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramic thin plates at room temperature
- BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
- DD CEN/TS 14425-5:2004 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
- BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
- BS EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
- BS EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
- BS EN ISO 18756:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
- BS EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
American Society for Testing and Materials (ASTM), Fracture toughness
- ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
- ASTM B646-97 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-12 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-04 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-03 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-06 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-17 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B646-19 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- ASTM B771-87(2001) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
- ASTM E2818-11(2019) Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
- ASTM B771-11(2021) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
- ASTM E399-90(1997) Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E399-08 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
- ASTM E399-09 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
- ASTM E399-06e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
- ASTM E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
- ASTM B645-98 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
- ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
- ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
- ASTM B645-02 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM E399-20a Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E399-23 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
- ASTM B645-21 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM B645-10(2015) Standard Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM B645-10 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM E1304-97(2008) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
- ASTM E1304-97 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
- ASTM E1304-97(2014)e1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
- ASTM E1304-97(2020) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
- ASTM B909-17 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
- ASTM D2524-22 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18 in. (3.2 mm) Gage Length
- ASTM C1421-15 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM E1922-97 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
- ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM B909-21a Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
- ASTM D3217-01 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
- ASTM D3217-95 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
- ASTM D3217-01a Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
- ASTM D3217/D3217M-20 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
- ASTM E399-06 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
- ASTM E399-17 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
- ASTM E399-20 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials
- ASTM E399-19 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials
- ASTM E1922/E1922M-22 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM D5045-14(2022) Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
- ASTM D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
- ASTM D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
- ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM E1922-04 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM E1922-04(2010)e1 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM D1294-22 Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4 mm) Gage Length
- ASTM D5528-01 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D5528-94a Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D5528-01(2007) Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D5528-01(2007)e3 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D5528/D5528M-21 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D5528-01(2007)e1 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D5528-01(2007)e2 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D7905/D7905M-14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D6671/D6671M-19 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM D6671/D6671M-06 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM D6671/D6671M-22 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM D6671/D6671M-13e1 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
American Society of Mechanical Engineers (ASME), Fracture toughness
- ASME SEC XI D1 NMA APP G-2002 Appendix G Fracture Toughness Criteria for Protection Against Failure
- ASME N-640-2001 Alternative Reference Fracture Toughness for Development of P-T Limit Curves Section XI, Division 1
- ASME N-629-2001 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Section XI, Division 1; SUPP 6 R(2002)
Society of Automotive Engineers (SAE), Fracture toughness
- SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
- SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
- SAE AMS5867B-2015 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
- SAE AMS5867C-2021 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
- SAE AMS5867B-2010 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
- SAE AMS5867A-2006 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed
- SAE AMS5867-2000 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed
- SAE AMS5867A-2001 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed UNS S41000
- SAE AMS4931-1992 TITANIUM ALLOY BARS, FORGINGS, AND RINGS 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
- SAE AMS4931F-2019 Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
- SAE AMS4931G-2019 Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
- SAE AMS4931E-2015 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)
- SAE AMS4931B-2002 Titanium Alloy Bars, Forgings, and Rings 6Al 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
- SAE AMS4938A-2009 Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Transverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
- SAE AMS4335-2011 Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
- SAE AMS4335-2001 Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
- SAE AMS4249A-2005 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) UNS A43570
- SAE AMS4249-1992 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing)
- SAE AMS4249A-2012 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing)
- SAE AMS6474-1996 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
- SAE AMS6474-2002 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
- SAE AMS6474A-2012 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
- SAE AMS4938A-2017 Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Traverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
- SAE AMS4938-1999 Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Transverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
- SAE AMS4938-2004 Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Transverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
Korean Agency for Technology and Standards (KATS), Fracture toughness
- KS L 1608-2014(2019) Testing method for fracture toughness of fines ceramics at elevated temperature
- KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
- KS B ISO 12737:2002 Metallic materials-Determination of plane-strain fracture toughness
- KS B ISO 12737:2015 Metallic materials－Determination of plane－strain fracture toughness
- KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
- KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
- KS M ISO 11673:2005 Unplasticized polyvinylchloride(PVC-U) pressure pipes-Determination of the fracture toughness properties
- KS M ISO 17958:2014 Paper and board — Determination of fracture toughness — Constant rate of elongation method(1.7 mm/s)
- KS M ISO 11673-2005(2020) Unplasticized polyvinylchloride(PVC－U) pressure pipes－Determination of the fracture toughness properties
- KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 13586-2012(2022) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
- KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
- KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
- KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
- KS M ISO 17281-2007(2017) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
- KS M ISO 17281-2007(2022) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
- KS M ISO 13586:2012 Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO TS 17958:2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
- KS M ISO 13586:2007 Plastics--Determination of fracture toughness (GIC and KIC)--Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 17281:2007 Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
- KS L ISO 18756-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method
- KS L ISO 18756-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method
- KS L ISO 18756:2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method
SAE - SAE International, Fracture toughness
- SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF
- SAE AMS5867-1992 Steel@ Corrosion and Heat Resistant@ Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness@ Annealed (UNS S41000)
- SAE AMS4931-1987 TITANIUM ALLOY BARS@ FORGINGS@ AND RINGS 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)
- SAE AMS4931A-1993 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed@ Fracture Toughness (UNS R56400)
- SAE AMS4335A-2017 Forgings@ Aluminum Alloys 2xxx and 7xxx@ Heat-Treated@ Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
- SAE AMS6474B-2018 Forgings@ Hardenable Steels and Corrosion-Resistant Steels Heat-Treated@ Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
- SAE AMS4249B-2018 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) (UNS A43570)
International Organization for Standardization (ISO), Fracture toughness
- ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness
- ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
- ISO 12737:1996 Metallic materials - Determination of the plane-strain fracture toughness
- ISO 12737:2010 Metallic materials — Determination of plane-strain fracture toughness
- ISO 23524:2022 Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
- ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes - Determination of the fracture toughness properties
- ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
- ISO 27306:2016 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
- ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO/TS 17958:2013 Paper and board - Determination of fracture toughness - Constant rate of elongation method (1,7 mm/s)
- ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
- ISO 13586:2018 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach
- ISO 26843:2015 Metallic materials - Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
- ISO 12135:2002/Cor 1:2008 Metallic materials — Unified method of test for the
determination of quasistatic fracture toughness
TECHNICAL CORRIGENDUM 1
- ISO 13586:2000 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) - Linear elastic fracture mechanics (LEFM) approach
- ISO 17281:2002 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) at moderately high loading rates (1 m/s)
- ISO 17281:2018 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
- ISO 21113:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramic thin plates at room temperature
- ISO 18756:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
PL-PKN, Fracture toughness
- PN H04335-1987 Metals Test method for piane — strain fracture toughness
IN-BIS, Fracture toughness
Japanese Industrial Standards Committee (JISC), Fracture toughness
- JIS R 1617:1994 Testing method for fracture toughness of fine ceramics at elevated temperature
- JIS R 1617:2002 Testing method for fracture toughness of fine ceramics at elevated temperature
- JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
- JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
- JIS K 7086:1993 Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics
CEN - European Committee for Standardization, Fracture toughness
- EN ISO 12737:2010 Metallic materials - Determination of plane-strain fracture toughness
- EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
- EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- PD CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method
European Committee for Standardization (CEN), Fracture toughness
- EN ISO 12737:1999 Metallic Materials - Determination of Plane-Strain Fracture Toughness
- EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
- CWA 18011:2023 Guidelines for the evaluation of the plane stress fracture toughness of advanced high strength steel sheets in the frame of fracture mechanics
- EN 843-7:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
- EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
- EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
- PD CEN/TS 14425-3:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method
- PD CEN/TS 14425-1:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1:Guide to test method selection
- EN 843-8:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
German Institute for Standardization, Fracture toughness
- DIN EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); English version of DIN EN ISO 12737
- DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
- DIN EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
- DIN EN ISO 12737:2011 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010); German version EN ISO 12737:2010
- DIN EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010); German version EN ISO 15653:2010
- DIN EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
- DIN EN 6033:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
- DIN EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - G[IIC]; German and English version EN 6034:2015
- DIN EN 6034:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - G[IIC]; German and English version EN 6034:2015
- DIN CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method; German version CEN/TS 14425-5:2004
- DIN CEN/TS 14425-1:2003-11 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
- DIN EN ISO 18756:2005-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003); German version EN ISO 18756:2005
- DIN EN ISO 15732:2005-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003); German version EN ISO 15732:2005
- DIN CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
- DIN EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003); German version EN ISO 18756:2005
未注明发布机构, Fracture toughness
- DIN EN ISO 12737:1999 Metallic materials – Determination of plane-strain fracture toughness
- BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1
- BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen
Professional Standard - Aviation, Fracture toughness
- HB 5279-1984 Test method for surface crack fracture toughness of sheet metal
- HB 7718.1-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 1:Test method of mode Ⅰ interlaminar fracture toughness
- HB 7718.2-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 2:Test method of mode Ⅱ interlaminar fracture toughness
- HB 7402-1996 GIC test method for mode I interlaminar fracture toughness of carbon fiber composite laminates
- HB 7403-1996 GⅡC test method for mode Ⅱ interlaminar fracture toughness of carbon fiber composite laminates
API - American Petroleum Institute, Fracture toughness
Professional Standard - Machinery, Fracture toughness
- JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material
Professional Standard - Energy, Fracture toughness
- NB/T 20230-2013 Fracture toughness requirements for materials uesd for coolant pressure boundary of pressurized water reactor
The Aluminum Association, Fracture toughness
- AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing
Professional Standard - Nuclear Industry, Fracture toughness
- EJ/T 721-1992 Fracture Toughness Requirements of PWR Coolant Pressure Boundary Materials
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fracture toughness
- GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach
- GB/T 23806-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam(SEPB)method
- GB/T 41738-2022 Test method for mode I interlaminar fracture toughness(GIC) of fibre metal laminates
- GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials
American National Standards Institute （ANSI), Fracture toughness
- ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
YU-JUS, Fracture toughness
- JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)
- JUS C.A4.083-1995 Mechanical testing of metals - Elementary concepts and properties relating to fractrure testing
Danish Standards Foundation, Fracture toughness
- DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- DS/EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
- DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- DS/EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
- DS/CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection
- DS/EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
- DS/CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method
ES-UNE, Fracture toughness
- UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
- UNE-EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC (Endorsed by AENOR in January of 2016.)
- UNE-EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC (Endorsed by AENOR in January of 2016.)
- UNE-EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) (Endorsed by AENOR in August of 2005.)
- UNE-EN ISO 23146:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (ISO 23146:2012) (Endorsed by AENOR in June of 2016.)
- UNE-EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003) (Endorsed by AENOR in August of 2005.)
Military Standard of the People's Republic of China-General Armament Department, Fracture toughness
- GJB 586-1988 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates
- GJB 586A-2021 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates
Lithuanian Standards Office , Fracture toughness
- LST EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
- LST EN 14425-3-2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
AENOR, Fracture toughness
- UNE-EN ISO 15653:2011 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
KR-KS, Fracture toughness
- KS M ISO TS 17958-2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
RU-GOST R, Fracture toughness
- GOST R 57994-2017 Polymer composites. Test methods for fracture toughness definition and energy release speeds
- GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
- GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
- GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GB-REG, Fracture toughness
- REG NASA-TN-D-7173-1973 Effect of specimen thickness of fatigue-crack-growth behavior and fracture toughness of 7075-T6 and 7178-T6 aluminum alloys
National Aeronautics and Space Administration (NASA), Fracture toughness
- NASA-TM-X-3316-1975 An investigation of fracture toughness, fatigue-crack growth, sustained-load flaw growth, and impact properties of three pressure vessel steels
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Fracture toughness
- PREN 6034-1995 Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode II - GIIc (Edition P1)
- PREN 6033-1995 Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode I - GIc (Edition P1)