ZH
RU
ES
How to test linear shrinkage?
How to test linear shrinkage?, Total:80 items.
In the international standard classification, How to test linear shrinkage? involves: Products of the textile industry, Plastics, Earthworks. Excavations. Foundation construction. Underground works, Rubber and plastics products, Refractories, Glass, Construction materials, Mechanical testing, Civil engineering in general, Textile auxiliary materials, Products of the chemical industry, Structures of buildings, Wood, sawlogs and sawn timber.
RU-GOST R, How to test linear shrinkage?
IN-BIS, How to test linear shrinkage?
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, How to test linear shrinkage?
- GJB 5873-2006 Determination of the linear shrinkage rate of molded vulcanizate
Professional Standard - Chemical Industry, How to test linear shrinkage?
- HG/T 2625-1994 Determination of Linear Shrinkage of Epoxy Casting Resin
Military Standard of the People's Republic of China-General Armament Department, How to test linear shrinkage?
- GJB 8614-2015 Determination of linear shrinkage of molded vulcanized rubber
- GJB 3308-1998 Radar feeder subsystem performance test method Voltage standing wave ratio loss Rated power receiver end leakage power transmission phase
Indonesia Standards, How to test linear shrinkage?
American Society for Testing and Materials (ASTM), How to test linear shrinkage?
- ASTM D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D4974-04 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
- ASTM D4974-04(2011) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
- ASTM C356-03 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- ASTM C426-06 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
- ASTM C356-87(1997) Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- ASTM C356-17 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- ASTM D2732-03 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D6289-03 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
Japanese Industrial Standards Committee (JISC), How to test linear shrinkage?
- JIS R 2208:1976 Test method for permanent linear change of refractory brick on reheating
Professional Standard - Aviation, How to test linear shrinkage?
- HB 5350.1-2004 Test method for properties of investment casting pattern materials-Part 1:Determination of linear shrinkage
- HB 5353.2-2004 Test method for properties of investment casting ceramic core-Part 2:Determination of sintered shrinkage
国家市场监督管理总局、中国国家标准化管理委员会, How to test linear shrinkage?
- GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method
IT-UNI, How to test linear shrinkage?
SG-SPRING SG, How to test linear shrinkage?
- SS 323 Pt.F2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F2 : Determination Of Unrestrained Linear Thermal Shrinkage
NZ-SNZ, How to test linear shrinkage?
- NZS 4402.2.6:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.6: Determination of the Linear Shrinkage
TR-TSE, How to test linear shrinkage?
- TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS
International Organization for Standardization (ISO), How to test linear shrinkage?
- ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
- ISO/DIS 13061-14 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage
- ISO/DIS 13061-13 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage
- ISO 6836:1983 Surface active agents; Mercerizing agents; Evaluation of the activity of wetting products for mercerization by determination of the shrinkage rate of cotton
ZA-SANS, How to test linear shrinkage?
- SANS 3001-GR10:2008 Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage
Standard Association of Australia （SAA）, How to test linear shrinkage?
British Standards Institution (BSI), How to test linear shrinkage?
- 20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
- BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
- BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
- BS EN 12617-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of early age linear shrinkage for structural bonding agents
- BS EN 12617-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of linear shrinkage for polymers and surface protection systems (SPS)
- 15/30279972 DC BS ISO 13061-14. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 14. Determination of volumetric shrinkage
- BS 6319-12:1992 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion
- 15/30273233 DC BS ISO 13061-13. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 13. Determination of radial and tangential shrinkage
Association Francaise de Normalisation, How to test linear shrinkage?
- NF EN 1367-4:2008 Essais pour déterminer les propriétés thermiques et l'altérabilité des granulats - Partie 4 : détermination du retrait au séchage
- NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
- NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
- NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
- NF T73-417:1983 Surface active agents. Mercerizing agents. Evaluation of the activity of wetting products for mercerization by determination of the shrinkage rate of cotton.
- NF B51-020-14*NF ISO 13061-14:2017 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 14 : determination of volumetric shrinkage
- NF P18-977-3*NF EN 12617-3:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 3 : determination of early age linear shrinkage for structural bonding agents.
- NF B51-020-13*NF ISO 13061-13:2017 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 13 : determination of radial and tangential shrinkage
- NF ISO 13061-14:2017 Propriétés physiques et mécaniques du bois - Méthodes d'essais sur petites éprouvettes de bois sans défauts - Partie 14 : détermination du retrait volumique
未注明发布机构, How to test linear shrinkage?
- BS EN 1367-4:2008(2009) Tests for thermal and weathering properties of aggregates Part 4 : Determination of drying shrinkage
- BS 2782-6-method 643A:1976(1999) Methods of testing Plastics — Part 6 : Dimensional properties — Method 643A : Shrinkage on heating of film intended for shrink wrapping applications
German Institute for Standardization, How to test linear shrinkage?
- DIN EN 1367-4:2008-06 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:2008
- DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
- DIN EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
- DIN EN ISO 294-4:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018
- DIN EN 12617-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS); German version EN 12617-1:2003
American National Standards Institute （ANSI), How to test linear shrinkage?
- ANSI/ASTM D2732:1997 Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
AASHTO - American Association of State Highway and Transportation Officials, How to test linear shrinkage?
- T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems
Danish Standards Foundation, How to test linear shrinkage?
- DS/EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
- DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- DS/EN 12617-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents
- DS/EN 12617-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
Lithuanian Standards Office , How to test linear shrinkage?
- LST EN 1367-4-2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
- LST EN 12617-3-2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents
- LST EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
- LST EN 12617-1-2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
AENOR, How to test linear shrinkage?
- UNE-EN 1367-4:2009 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
- UNE-EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
- UNE-EN 12617-1:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS).
ES-UNE, How to test linear shrinkage?
- UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
CEN - European Committee for Standardization, How to test linear shrinkage?
- EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
European Committee for Standardization (CEN), How to test linear shrinkage?
- EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
- EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- EN 12617-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to test linear shrinkage?
- GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
VN-TCVN, How to test linear shrinkage?
- TCVN 5457-1991 Surface active agents.Mercerizing agents.Evaluation of the activity of wetting products for mercerization by determination of the shrinkage rate of cotton
YU-JUS, How to test linear shrinkage?
- JUS N.N6.503-1989 Radiocommunications. Aerials for the reception of television and sound broadcasting in the frequency range 30 MHz to 1000 MHz. Mechanical properties and anvironmental test