ZH

RU

ES

Check standard carbon content

Check standard carbon content, Total:500 items.

In the international standard classification, Check standard carbon content involves: Petroleum products in general, Inorganic chemicals, Water quality, Measurement of volume, mass, density, viscosity, Coals, Fuels, Raw materials for rubber and plastics, Soil quality. Pedology, Construction materials, Testing of metals, Ceramics, Rubber and plastics products, Non-ferrous metals, Analytical chemistry, Plastics, Iron and steel products, Rubber, Paints and varnishes, Organic chemicals, Powder metallurgy, Road vehicles in general, Nuclear energy engineering, Milk and milk products, Construction of waterways and ports, Domestic safety, Alarm and warning systems, Lubricants, industrial oils and related products, Refractories, Products of the chemical industry, TESTING, Farming and forestry, Natural gas, Air quality, Insulating fluids, Construction industry, Company organization and management, Semiconducting materials, Textile fibres, Metalliferous minerals, Electricity. Magnetism. Electrical and magnetic measurements, Non-destructive testing, Surface treatment and coating, Wood, sawlogs and sawn timber, Road engineering, Pharmaceutics, Equipment for petroleum and natural gas industries, IT terminal and other peripheral equipment, Food products in general, Structures of buildings, Crude petroleum, Leather technology, Ferrous metals, Linear and angular measurements, Metrology and measurement in general, Protection of and in buildings, Materials for aerospace construction, Paper and board, Cereals, pulses and derived products, Languages used in information technology, Pipeline components and pipelines, Wood-based panels, Protective equipment, Medical equipment, Farm buildings, structures and installations, Insulating materials, Glass, Standardization. General rules.


HU-MSZT, Check standard carbon content

American Society for Testing and Materials (ASTM), Check standard carbon content

  • ASTM D7662-15(2020) Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
  • ASTM D7633-10a Standard Test Method for Carbon BlackCARBON CONTENT
  • ASTM D4129-05 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-05(2013) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D1756-96(2000) Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
  • ASTM D1756-96 Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
  • ASTM D1756-02 Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
  • ASTM D1619-03(2008) Standard Test Methods for Carbon Blackx2014;Sulfur Content
  • ASTM D7633-10 Standard Test Method for Carbon BlackCARBON CONTENT
  • ASTM D7633-13(2022) Standard Test Method for Carbon Black—Carbon Content
  • ASTM D1619-16 Standard Test Methods for Carbon Black&x2014;Sulfur Content
  • ASTM D7633-13 Standard Test Method for Carbon Blackmdash;Carbon Content
  • ASTM D7771-11 Standard Test Method for Determination of Benzo-x03B1;-Pyrene (BaP) Content in Carbon Black
  • ASTM D7771-17a Standard Test Method for Determination of Benzo-&x3b1;-Pyrene (BaP) Content in Carbon Black
  • ASTM D7633-10b Standard Test Method for Carbon BlackCARBON CONTENT
  • ASTM D7633-13(2018) Standard Test Method for Carbon BlackCARBON CONTENT
  • ASTM D4944-98 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester Method
  • ASTM D4373-21 Standard Test Method for Rapid Determination of Carbonate Content of Soils
  • ASTM D4373-02(2007) Standard Test Method for Rapid Determination of Carbonate Content of Soils
  • ASTM C831-18 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
  • ASTM D4373-02 Standard Test Method for Rapid Determination of Carbonate Content of Soils
  • ASTM D4373-14 Standard Test Method for Rapid Determination of Carbonate Content of Soils
  • ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5904-02 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5904-02(2009) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D4373-96 Standard Test Method for Calcium Carbonate Content of Soils
  • ASTM E1568-03 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
  • ASTM D2866-94(2004) Standard Test Method for Total Ash Content of Activated Carbon
  • ASTM D1603-01 Standard Test Method for Carbon Black In Olefin Plastics
  • ASTM D1603-94 Standard Test Method for Carbon Black In Olefin Plastics
  • ASTM D1603-06 Standard Test Method for Carbon Black Content in Olefin Plastics
  • ASTM A27/A27M-10 Standard Specification for Steel Castings, Carbon, for General Application
  • ASTM D1603-14 Standard Test Method for Carbon Black Content in Olefin Plastics
  • ASTM D7662-13 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
  • ASTM D7662-15 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
  • ASTM A27/A27M-08 Standard Specification for Steel Castings, Carbon, for General Application
  • ASTM D7662-10 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
  • ASTM D7662-11 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
  • ASTM D1619-10 Standard Test Methods for Carbon Black&x2014;Sulfur Content
  • ASTM D4129-98 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-98(2003) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D412-98a(2002)e1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers8212;Tension
  • ASTM D412-06ae1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomersx2014;Tension
  • ASTM A794-06 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
  • ASTM A794-97 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
  • ASTM UOP703-09 Carbon on Catalysts by Induction Furnance Combustion and Infrared Detection
  • ASTM D3618-85a(1999) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM D3618-05(2022) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM D361-65 Standard test method for lead content in paint and dry paint films
  • ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM E1019-00 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
  • ASTM E1019-18 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
  • ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM D6505-00(2006) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D6505-00 Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM C831-98(2008) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
  • ASTM C831-98(2013) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes?
  • ASTM C831-98(2017) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes&x2009;
  • ASTM C831-98(2017)e1 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes&x2009;
  • ASTM E1019-03 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
  • ASTM E1019-02 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
  • ASTM D3192-02 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
  • ASTM D3192-09 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
  • ASTM D3192-09(2014) Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
  • ASTM D6505-00(2012) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D6505-00(2017) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM C1592/C1592M-21 Standard Guide for Making Quality Nondestructive Assay Measurements
  • ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
  • ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
  • ASTM C1592/C1592M-09 Standard Guide for Making Quality Nondestructive Assay Measurements
  • ASTM C1853-17 Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method
  • ASTM E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
  • ASTM D5291-02(2007) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
  • ASTM D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
  • ASTM D4530-06e1 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D4530-15 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM E1753-04 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM C1099-92(1997) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
  • ASTM C1099-92(2002) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
  • ASTM C1099-07(2019) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
  • ASTM D4218-15 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
  • ASTM D1886-03 Standard Test Methods for Nickel in Water
  • ASTM D3866-02 Standard Test Methods for Silver in Water
  • ASTM D3866-92(1996) Standard Test Methods for Silver in Water
  • ASTM D3372-02(2007)e1 Standard Test Method for Molybdenum in Water
  • ASTM D3558-03 Standard Test Methods for Cobalt in Water
  • ASTM D3866-07 Standard Test Methods for Silver in Water
  • ASTM D3372-92(1996) Standard Test Method for Molybdenum in Water
  • ASTM D3372-02 Standard Test Method for Molybdenum in Water
  • ASTM D2361-02 Standard Test Method for Chlorine in Coal
  • ASTM D3373-03(2007)e1 Standard Test Method for Vanadium in Water
  • ASTM D3373-03 Standard Test Method for Vanadium in Water
  • ASTM D1619-99 Standard Test Methods for Carbon Black-Sulfur Content
  • ASTM D1619-16a Standard Test Methods for Carbon Black&x2014;Sulfur Content
  • ASTM D3859-03 Standard Test Methods for Selenium in Water
  • ASTM C1233-98 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
  • ASTM C1233-15 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
  • ASTM C831-98 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
  • ASTM C831-98(2003) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
  • ASTM D5173-15 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • ASTM D6385-99 Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
  • ASTM D6385-99(2006) Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
  • ASTM D6385-99(2011) Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
  • ASTM D1827-92(1996)e1 Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM E1753-01 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM E1753-95 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D1506-99 Standard Test Methods for Carbon Black-Ash Content
  • ASTM D1506-99(2007) Standard Test Methods for Carbon Black-Ash Content
  • ASTM E1584-23 Standard Test Method for Assay of Nitric Acid
  • ASTM E1569-93(1998) Standard Test Method for Determination of Oxygen in Tantalum Powder
  • ASTM D4530-00 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D6524-00(2006) Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
  • ASTM D4530-03 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D4530-06 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D4530-11 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D5173-15(2023) Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • ASTM D4888-88(1999) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D7202-06 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Fluorescence Detection
  • ASTM D7202-11 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Optical Fluorescence Detection
  • ASTM D5292-99(2004) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D1827-92(2002) Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM D5292-99 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D5292-99(2009) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D1827-92(2002)e1 Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM E1852-96(2001) Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
  • ASTM D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM E1852-19 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
  • ASTM D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
  • ASTM D2913-96 Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM D1918-95(2004)e1 Standard Test Method for Asbestos Content of Asbestos Textiles
  • ASTM E314-00 Standard Test Methods for Manganese in Iron Ores
  • ASTM E314-00(2005) Standard Test Methods for Manganese in Iron Ores
  • ASTM D3343-05(2010) Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
  • ASTM D2913-20 Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM D3343-16 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
  • ASTM D7959-15 Standard Test Method for Chloride Content Determination
  • ASTM D4530-07 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5292-99(2014) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D5292-99(2004)e1 Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM E1852-08 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D7026-04 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
  • ASTM D7026-13 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
  • ASTM D6317-98(2009) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D7719-21 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
  • ASTM D7719-21a Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel
  • ASTM D7719-14b Standard Specification for High-Octane Unleaded Fuel
  • ASTM D6567-00(2006) Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
  • ASTM D6567-00 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
  • ASTM C1233-03 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
  • ASTM C1233-09 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
  • ASTM D4370-01(2023) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
  • ASTM D2987-88(2002) Standard Test Method for Moisture Content of Asbestos Fiber
  • ASTM D2987-88(2002)e1 Standard Test Method for Moisture Content of Asbestos Fiber
  • ASTM E45-05e1 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E45-05 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM D2987-88(2006) Standard Test Method for Moisture Content of Asbestos Fiber
  • ASTM E371-99 Standard Test Method for the Determination of Boron in Ferroboron
  • ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
  • ASTM E45-11 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E45-11a Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E45-05e3 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E45-13 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM C454-10 Standard Test Method for Disintegration of Carbon Refractories by Alkali
  • ASTM D4442-20 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
  • ASTM E1852-96e1 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
  • ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D7923-17 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • ASTM D6866-11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
  • ASTM D7923-17ae1 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • ASTM D7923-19 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D7923-16 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • ASTM D6317-98(2004) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D6317-98 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM C1843-16 Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate
  • ASTM A659/A659M-10 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
  • ASTM A659/A659M-12 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
  • ASTM D5347-95(2001) Standard Test Method for Determination of the Ash Content of Fats and Oils
  • ASTM D5347-95 Standard Test Method for Determination of the Ash Content of Fats and Oils
  • ASTM D5347-95(2006) Standard Test Method for Determination of the Ash Content of Fats and Oils
  • ASTM F1856-04(2009) Standard Practice for Determining Toner Usage for Printer Cartridges
  • ASTM E45-18 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E45-97(2002) Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
  • ASTM D3230-06 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D3230-05a Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D3230-05 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D6018-96(2001) Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM D6018-96 Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM D6018-96(2006) Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM E1569-03 Standard Test Method for Determination of Oxygen in Tantalum Powder
  • ASTM D3230-99 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D512-04 Standard Test Methods for Chloride Ion In Water
  • ASTM D3230-99(2004) Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D3230-08 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D3230-09 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D512-10 Standard Test Methods for Chloride Ion In Water
  • ASTM E45-97e2 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E45-18a Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM D3230-13 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • ASTM D7637-10 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
  • ASTM D512-12 Standard Test Methods for Chloride Ion In Water
  • ASTM E45-18a(2023) Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM E2005-05 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
  • ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D3731-87(1998) Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • ASTM D5227-01 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • ASTM D5227-01(2008)e1 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • ASTM D5227-21 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • ASTM C173/C173M-14 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM D3731-87(2012) Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • ASTM D5227-13 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • ASTM D4988-96(2006) Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
  • ASTM D4988-96 Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
  • ASTM D4988-96(2001) Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
  • ASTM D5227-95 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • ASTM D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
  • ASTM D2191-97(2001) Standard Test Method for Acetaldehyde Content of Vinyl Acetate
  • ASTM D2791-07 Standard Test Method for On-line Determination of Sodium in Water
  • ASTM F1779-97(2003) Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM F1779-97 Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM D2191-06 Standard Test Method for Acetaldehyde Content of Vinyl Acetate
  • ASTM D2191-97 Standard Test Method for Acetaldehyde Content of Vinyl Acetate
  • ASTM D1552-90e1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D1552-95 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D6017-97(2003) Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
  • ASTM D4574-02 Standard Test Methods for Rubber Chemicals8212;Determination of Ash Content
  • ASTM F1779-08 Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM D1552-83 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D4929-99 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D1603-11 Standard Test Method for Carbon Black Content in Olefin Plastics
  • ASTM D3171-11 Standard Test Methods for Constituent Content of Composite Materials
  • ASTM D4929-04 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-15a Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM F1779-08(2014) Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM D8010-18 Standard Test Method for Determination of Water Soluble Alkali Content in Coal
  • ASTM D6505-00(2022) Standard Test Method for Assay of normal-Propyl Bromide Content
  • ASTM D3731-20 Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • ASTM D5832-98(2021) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
  • ASTM D1552-16 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
  • ASTM D1552-15 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
  • ASTM D8010-16 Standard Practice for Determination of Water Soluble Alkali Content in Coal
  • ASTM D6316-00 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
  • ASTM D6316-09b Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
  • ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4984-89(1999) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4984-20 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM C173/C173M-12 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM D4442-15 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
  • ASTM D5599-17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5599-18 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM E2031-99(2016) Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
  • ASTM D4281-95 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
  • ASTM E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
  • ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2522-03 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D2522-95 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM E1771-95(2001) Standard Test Method for Determination of Copper in Anode and Blister Copper
  • ASTM D2522-03(2008) Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D4574-06(2012) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Ash Content
  • ASTM E1771-95 Standard Test Method for Determination of Copper in Anode and Blister Copper
  • ASTM E2575-08 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys
  • ASTM E1600-23 Standard Test Methods for Determination of Gold in Cyanide Solutions
  • ASTM C1233-15(2021) Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
  • ASTM D2522-03(2008)e1 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM A1033-18(2023) Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
  • ASTM E1568-13 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
  • ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D6023-07 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
  • ASTM D6023-16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
  • ASTM D6317-15 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
  • ASTM E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D1142-95 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D7232-06(2016) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
  • ASTM D6866-06 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
  • ASTM D6866-06a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
  • ASTM D6866-04 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
  • ASTM D6866-04a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
  • ASTM D6866-05 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
  • ASTM E1019-08 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
  • ASTM D6307-05 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D6307-04 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D7419-07 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
  • ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM A1033-18 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
  • ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM C559-90(2010) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
  • ASTM E1447-09 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
  • ASTM D4984-06(2011) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4984-06(2015) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4629-12(2017) Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D2685-95(2003) Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
  • ASTM D2685-11 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
  • ASTM D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil

ZA-SANS, Check standard carbon content

  • SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces
  • SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
  • SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
  • SANS 318:2005 Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)

VE-FONDONORMA, Check standard carbon content

German Institute for Standardization, Check standard carbon content

  • DIN 51726:2004 Testing of solid fuels - Determination of the carbonate carbon dioxide content
  • DIN 51075-3:1982 Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content
  • DIN 51075-5:1982 Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content
  • DIN 51075-2:1984 Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content
  • DIN 51796:1976 Testing of liquid mineral hydrocarbons; determination of mercaptan sulfur content, potentiometric and amperometric methods
  • DIN 51796:2010 Testing of liquid mineral hydrocarbons - Determination of mercaptan sulfur content - Potentiometric method
  • DIN 51075-4:1982 Testing of ceramic materials; chemical analysis of silicon carbide; determination of the free silicon content
  • DIN 51863-1:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; nickel carbonate method
  • DIN V 51408-2:1987 Testing of mineral oil hydrocarbons; determination of chlorine content; microcoulometric determination, oxidation method
  • DIN 51408-1:1983 Testing of liquid petroleum hydrocarbons; determination of chlorine content; Wickbold combustion method
  • DIN 51777-1:1983 Testing of mineraloil hydrocarbons and solvents; determination of water content according to Karl Fischer; direct method
  • DIN 51933:2012-12 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
  • DIN 50438-2:1982 Testing of materials for semiconductor technology; determination of impurty content in silicon by infrared absorption; carbon
  • DIN EN 10247:2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures; English version of DIN EN 10247:2007-07
  • DIN EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
  • DIN EN 10247:2017-09 Micrographic examination of the non-metallic inclusion content of steels using standard pictures; German version EN 10247:2017
  • DIN 52241-7:1986 Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of manganese content calculated as MnO

National Metrological Verification Regulations of the People's Republic of China, Check standard carbon content

  • JJG(石油) 40-1995 Verification Regulation of the Pressure Calcareous Rock Meter
  • JJG 872-1994 Verification Regulation of Standard Measuring Coils of Magnetic Flux
  • JJG(石油) 02-1990 Verification rules for standard orifice plate for natural gas flow measurement
  • JJG 887-2014 Standard Tapered Roller Tester
  • JJG 887-1995 Verification Regulation of Standard Tapered Roller Tester
  • JJG 783-1992 Verification Regulation of Angle Measuring Instrument for Bearing Ring

Professional Standard - Ferrous Metallurgy, Check standard carbon content

  • YB/T 169-2014 Metallographic test method of sorbite in high carbon steel wire rod
  • YB/T 169-2000 Metallographic test mothod for the sobit percent in the high carbon steel wire rod
  • YB/T 9008-1998 Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey
  • YB/T 9008-1998(条文说明) Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey(EXPLANATION)

AASHTO - American Association of State Highway and Transportation Officials, Check standard carbon content

  • TP 78-2009 Standard Specification for Detecting the Presence of Phosphorous in Asphalt Binder
  • T 196M/T 196-2005 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • T 196M/T 196-2009 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • T 196M/T 196-2011 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • T 137-2004 Standard Method of Test for Air Content of Hydraulic Cement Mortar
  • T 137-2012 Standard Method of Test for Air Content of Hydraulic Cement Mortar
  • T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
  • T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

YU-JUS, Check standard carbon content

  • JUS F.S3.011-1989 Standard method of test far wool content of raw wool. Laboratorv scale
  • JUS C.A3.013-1987 Determination ofcontent of non-metallic inclusions in stee/. Micrographic method using standarddiagrams

Professional Standard - Commodity Inspection, Check standard carbon content

  • SN/T 0541.5-2009 Inspecting method of import and export standard rubber.Determination of nitrogen content
  • SN/T 0541.3-1996 Inspecting method for import and export standard rubber.Determination of ash content
  • SN/T 0541.4-1996 Inspecting method for import and export standard rubber.Determination of volatile content
  • SN/T 0541.3-2010 Inspection method for import and export standard rubber.Part 3:Determination of ash content
  • SN/T 0541.4-2010 Inspection for import and export standard rubber.Part 4:Determination of volatile matter content

Military Standard of the People's Republic of China-General Armament Department, Check standard carbon content

  • GJB 533.6-1988 Detection method for 45 components of submarine cabin air. Calibration tube method for determination of carbon dioxide content.
  • GJB 533.2-1988 Detection method for 45 components of submarine cabin air - Determination of carbon monoxide content Calibration tube method
  • GJB/J 3410-1998 Calibration procedures for high-accuracy roundness and cylindricity measurement standard devices
  • GJB 533.29-1988 Detection method for 45 components of submarine cabin air. Determination of Freon-11, chloroform, and carbon tetrachloride content by gas chromatography.

Korean Agency for Technology and Standards (KATS), Check standard carbon content

  • KS D ISO 11873:2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
  • KS D ISO 11873-2011(2016) Hardmetals-Determination of sulfur and carbon contents in cobalt metal powders-Infrared detection method
  • KS F 2596-2019 Standard test method for measuring carbonation depth of concrete
  • KS D ISO 16592-2011(2021) Microbeam analysis-Electron probe microanalysis-Guidelines for determining the carbon content of steels using a calibration curve method
  • KS D ISO 9441-2002(2022) Steel-Determination of niobium content-PAR spectrophotometric method
  • KS M 2414-2011(2016) Standard test method for sulfur in petroleum products (high-temperature method)
  • KS F 2717-2013(2018) Standard test method for chloride ion content in hardened concrete
  • KS F 2104-2013(2018) Standard test method of organic matter contents in soils by ignition loss
  • KS D ISO 16592:2011 Microbeam analysis-Electron probe microanalysis-Guidelines for determining the carbon content of steels using a calibration curve method
  • KS D ISO 16592-2011(2016) Microbeam analysis-Electron probe microanalysis-Guidelines for determining the carbon content of steels using a calibration curve method

KR-KS, Check standard carbon content

  • KS D ISO 11873-2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method

The American Road & Transportation Builders Association, Check standard carbon content

  • AASHTO T 237-2005 Standard Method of Test for Testing Epoxy Resin Adhesive
  • AASHTO T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition
  • AASHTO T 255-2000 Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying
  • AASHTO T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
  • AASHTO T 291-1994(R 2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
  • AASHTO T 290-1995 Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil
  • AASHTO T 137-2021 Standard Method of Test for Air Content of Hydraulic Cement Mortar
  • AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
  • AASHTO T 121M/T 121-2016 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • AASHTO T 121M/T 121-2011 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • AASHTO T 121M/T 121-2015 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

ES-AENOR, Check standard carbon content

Professional Standard - Traffic, Check standard carbon content

  • JTS 258-2008 Standard for Quality Inspection of Port and Waterway Engineering Survey

American National Standards Institute (ANSI), Check standard carbon content

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Check standard carbon content

  • IEEE 1650-2005 Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes

Professional Standard - Non-ferrous Metal, Check standard carbon content

  • YS/T 587.15-2023 Calcined coke for prebaked blocks— Part 15: Determination of total carbon,hydrogen and nitrogen contents

Institute of Electrical and Electronics Engineers (IEEE), Check standard carbon content

  • NFPA (Fire) 720 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment, 2015 Edition
  • IEEE Std 1650-2005 IEEE Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
  • IEEE Std P1650/D10 Approved IEEE Draft Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes (Replaced by 1650-2005)

NL-NEN, Check standard carbon content

  • NEN-EN 196-21-1993 Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement

Association Francaise de Normalisation, Check standard carbon content

  • NF EN 1784:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse des hydrocarbures
  • NF L17-422*NF EN 2559:1997 Aerospace series. Carbon fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area.
  • NF A04-116:2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures.
  • NF A04-116*NF EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Check standard carbon content

  • GB/T 10561-2005 Steel.Determination of content of nonmetallic inclusions.Micrographic method using standards diagrams
  • GB/T 10561-2023 Standard grading chart microscopic examination method for determination of non-metallic inclusion content in steel
  • GB/T 17290-1998 Petroleum measurement systems--Calibration--Temperature corrections for use with volumetric reference measuring systems

RU-GOST R, Check standard carbon content

  • GOST R 56881-2016 Biomass. Determination of the ash content by standard method
  • GOST R 55955-2014 Standard practice for determination of gas content of coal
  • GOST R ISO 4967-2015 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams
  • GOST R 56886-2016 Wood Fuels. Determination of moisture content by standard method
  • GOST R 56888-2016 Wood Fuel. Determination of ash content by standard method
  • GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
  • GOST 8.235-1977 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification
  • GOST 8.395-1980 State system for ensuring the uniformity of measurements. Reference conditions of measurements while calibrating. General requirements
  • GOST R 8.925-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics
  • GOST R EN 13274-6-2011 Occupational safety standards system. Respiratory personal protective devices. Methods of test. Part 6. Determination of carbon dioxide content of the inhalation air
  • GOST 22238-1976 Nondestractiv testing. Mesure-reference for thickness gauges of coverings. General principles
  • GOST R 57975.1-2017 Associated oil gas. Determination of composition by gas chromatography method. Part 1. Determination of hydrocarbons C1-C8+ and inorganic gases content by flame ionization detector and thermal conductivity detector
  • GOST EN 13274-6-2016 Occupational safety standards system. Respiratory protective devices. Methods of test. Part 6. Determination of carbon dioxide content of the inhalation air
  • GOST 33577-2015 Activated carbon. Standard test method for determination of water-soluble substances content

CZ-CSN, Check standard carbon content

  • CSN 80 0074-1981 Te-jtiles. "Dotermination of standard ary roass and moisturo content

Hebei Provincial Standard of the People's Republic of China, Check standard carbon content

  • DB13/T 2768.2-2018 Graphene powder material detection method part 2: Determination of carbon, nitrogen, hydrogen, sulfur, oxygen element content

Underwriters Laboratories (UL), Check standard carbon content

  • UL 1524-1999 UL Standard for Safety Carbon Monoxide Gas Detectors for Marine Use (Second Edition; Reprint with Revisions Through and Including December 15@ 2000)
  • UL 2034-1992 UL Standard for Safety Single and Multiple Station Carbon Monoxide Detectors (First Edition; Reprint with Revisions Through and Including August 08@ 1995)

工业和信息化部, Check standard carbon content

  • YB/T 4726.1-2018 Determination of zinc content in iron-containing dust mud EDTA standard solution titration method

Aeronautical Radio Inc., Check standard carbon content

Group Standards of the People's Republic of China, Check standard carbon content

  • T/CIET 002-2022 Provisions for the Administration of Engineering Quality inspection institutions
  • T/HNCAA 032-2022 Standard for compiling construction project quality inspection and testing report
  • T/CIET 004-2022 Special ability assessment standards for engineering quality testing institutions
  • T/CECS G:H15-01-2023 Standards for Quality Inspection and Evaluation of Highway Reconnaissance Products
  • T/CIET 006-2022 Credit evaluation standard for engineering quality inspection institutions
  • T/CASME 527-2023 Quality Standard and detection method of cannabis herb
  • T/CI 036-2022 Content Index of High Resistant Starch Potato and Its Detection Method
  • T/HNCAA 044-2023 Standard for foaming quality and testing methods of foamed asphalt
  • T/CI 037-2022 Content Index of High Resistant Starch Rice for Cooking and Processing and Its Detection Method
  • T/HNCAA 031-2022 Electronic Archives Management Standards for Construction Quality Inspection and Testing Institutions
  • T/SDCA 004-2021 Management specifiaction of reference material for quality and safety inspection of agricultural products
  • T/HZQT 00005-2022 Textile Testing Laboratory Quality Management—Standard Substance Management?
  • T/HNCAA 033-2022 Standard for testing soil subgrade resilience modulus by falling ball method

Professional Standard - Construction Industry, Check standard carbon content

  • JGJ/T 454-2019 Intelligent building engineering quality inspection standard

KE-KEBS, Check standard carbon content

PK-PSQCA, Check standard carbon content

  • PS 1522-1982 PAKISTAN STANDARD METHOD FOR DETERMINATION OF ALKALI CONTENT IN WOOL
  • PS 1554-1982 PAKISTAN STANDARD METHOD FOR THE DETERMI-NATION OF ACID CONTENT IN WOOL

Professional Standard - Urban Construction, Check standard carbon content

  • CJJ/T 164-2011 Standard for quality inspection of shield tunnel segment
  • CJ 26.29-1991 Municipal sewage water quality inspection method standard Determination of total organic carbon non-dispersive infrared method

Shandong Provincial Standard of the People's Republic of China, Check standard carbon content

  • DB37/T 5262-2023 Technical Standard for Quality Inspection of Underground Holes and Grooves
  • DB37/T 5166-2020 Intelligent building engineering quality inspection and acceptance standards

PT-IPQ, Check standard carbon content

  • NP 3844-1989 COMBUST?VEIS S?LIDOS Carv?es Determina??o da humidade total. Método ISO

European Committee for Standardization (CEN), Check standard carbon content

  • EN 10247:2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
  • EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
  • EN ISO 10893-10:2011/A1:2020 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultr

National Fire Protection Association (NFPA), Check standard carbon content

  • NFPA 720-2009 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment Effective Date: 10/10/2008
  • NFPA 720-2015 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment (Effective Date: 9/3/2014)

American Association, Check standard carbon content

  • ASSE 5000 SERIES-2004 Professional Qualifications Standard for Backflow Prevention Assembly Testers, Repairers and Surveyors

UY-UNIT, Check standard carbon content

CU-NC, Check standard carbon content

  • NC 90-04-21-1988 Standards System for Metrological Assurance. Measurement of Volume Contained in Storing Vessel by Means of the Sounding Method. General Rules

PL-PKN, Check standard carbon content

US-FCR, Check standard carbon content

British Standards Institution (BSI), Check standard carbon content

  • BS EN 10247:2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
  • BS IEC 62525:2007 Standard test interface language (STIL) for digital test vector data
  • BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

Danish Standards Foundation, Check standard carbon content

  • DS/EN 10247:2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures

Lithuanian Standards Office , Check standard carbon content

  • LST EN 10247-2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures

ES-UNE, Check standard carbon content

  • UNE-EN 10247:2018 Micrographic examination of the non-metallic inclusion content of steels using standard pictures

International Organization for Standardization (ISO), Check standard carbon content

  • ISO 4967:2013 Steel.Determination of content of non-metallic inclusions.Micrographic method using standard diagrams
  • ISO 4967:1998 Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams

中华人民共和国国家卫生和计划生育委员会, Check standard carbon content

  • GB 17022-1997 Criteria for quality assessment of field semi-quantitative test kit of salt iodine

Heilongjiang Provincial Standard of the People's Republic of China, Check standard carbon content

  • DB23/T 3350-2022 Heilongjiang Provincial Construction Engineering Quality Inspection Organization On-site Inspection Technology Management Standard

API - American Petroleum Institute, Check standard carbon content

  • API MPMS 6.7-1991 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons

Professional Standard - Agriculture, Check standard carbon content

  • NY/T 2243-2012 Construction standard of supervision of supervision and testing center for quality and safety of agri-products at provincial level
  • NY/T 2242-2012 Construction standard of supervision and testing center for quality and safety of agri-products of ministry of agriculture
  • NY/T 2244-2012 Construction standard of supervision and testing center for quality and safety of agri-products at municipal level

Professional Standard - Tobacco, Check standard carbon content

  • YC/T 169.8-2002 Testing physical and chemical characteristics of tow for cigarette----Part 8: Moisture content
  • YC/T 169.9-2002 Testing physical and chemical characteristics of tow for cigarette----Part 9: Lubricant content

CEN - European Committee for Standardization, Check standard carbon content

  • DD ENV 10247-1998 Micrographic Examination of the Nonmetallic Inclusion Content of Steels Using Standard Pictures (Incorporating Corrigendum April 2000)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved