ZH
RU
ES

Bulk Density Test Method

Bulk Density Test Method, Total:435 items.

In the international standard classification, Bulk Density Test Method involves: Nuclear energy engineering, Construction materials, Measurement of volume, mass, density, viscosity, Fertilizers, Particle size analysis. Sieving, Ceramics, Paper and board, Products of the chemical industry, Paint coating equipment, Packaging and distribution of goods in general, Coals, Non-metalliferous minerals, Soil quality. Pedology, Fuels, Cereals, pulses and derived products, Road engineering, Milk and milk products, Refractories, Protection of and in buildings, Road vehicles in general, Inorganic chemicals, Plastics, Paints and varnishes, Earthworks. Excavations. Foundation construction. Underground works, Equipment for entertainment, Analytical chemistry, Glass, Farming and forestry, Paper production processes, Metalliferous minerals, Printed circuits and boards, Pumps, Linear and angular measurements, Geology. Meteorology. Hydrology, Beverages, Electronic display devices, Metrology and measurement in general, Seals, glands, Waxes, bituminous materials and other petroleum products, Petroleum products in general, Cutting tools, Testing of metals, Organic chemicals, Mining and quarrying, Adhesives, Pulps, Audio, video and audiovisual engineering, Tea. Coffee. Cocoa, Paint ingredients, Applications of information technology, Materials for aerospace construction, Air quality, Products of the textile industry, Graphic technology, Reinforced plastics, Semiconducting materials, Crude petroleum, Raw materials for rubber and plastics, Cellular materials, Textile fibres, Rubber, Textile auxiliary materials, Optoelectronics. Laser equipment, Vibrations, shock and vibration measurements.

American Society for Testing and Materials (ASTM), Bulk Density Test Method

ASTM C1770-21 Standard Test Method for ?Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide
ASTM C1770-13 Standard Test Method for ???Determination of Loose and Tapped Bulk Density of Plutonium Oxide
ASTM C1162-90(2004) Standard Test Method for Loose Density of Asbestos
ASTM C1162-90(2004)e1 Standard Test Method for Loose Density of Asbestos
ASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM C520-15(2020) Standard Test Methods for Density of Granular Loose Fill Insulations
ASTM C520-15 Standard Test Methods for Density of Granular Loose Fill Insulations
ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
ASTM D6737-01(2006) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
ASTM D6737-01 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM C1162-90(1999) Standard Test Method for Loose Density of Asbestos
ASTM C1162/C1162M-90(2015) Standard Test Method for Loose Density of Asbestos
ASTM C1162/C1162M-90(2009)e1 Standard Test Method for Loose Density of Asbestos
ASTM D4292-10 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
ASTM C1374-97 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM C1374-03 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM C1374-03(2009) Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM D2480-82e1 Test Method for Maturity Index and Linear Density of Cotton Fibers by the Causticaire Method
ASTM C357-07(2009)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C559-90(2005) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM C1374-14 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM D4531-15 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
ASTM C1374-18(2023) Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM C838-96(2005) Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C520-98 Standard Test Methods for Density of Granular Loose Fill Insulations
ASTM C520-04 Standard Test Methods for Density of Granular Loose Fill Insulations
ASTM C520-04(2010) Standard Test Methods for Density of Granular Loose Fill Insulations
ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM C1374-18 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM E295-82(2006) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM C664-10(2020) Standard Test Methods for Thickness of Diffusion Coating
ASTM E295-82(2019) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM F1315-00 Standard Test Method for Density of a Sheet Gasket Material
ASTM F1315-00(2006) Standard Test Method for Density of a Sheet Gasket Material
ASTM F1315-00(2014) Standard Test Method for Density of a Sheet Gasket Material
ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique
ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM C1039-85(2005) Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM C134-95(2005) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM C729-11 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E295-82(2014) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM D6347/D6347M-05 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM C134-95(2010) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
ASTM D4052-18a Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-18 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4052-16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D1875-95 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D2202-00(2023) Standard Test Method for Slump of Sealants
ASTM C1039-85(2015) Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM C693-93(2003) Standard Test Method for Density of Glass by Buoyancy
ASTM E1935-97(2013) Standard Test Method for Calibrating and Measuring CT Density
ASTM E1935-97(2019) Standard Test Method for Calibrating and Measuring CT Density
ASTM C134-95(2016) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
ASTM D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D792-98 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D792-00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D792-13 Standard Test Methods for Density and Specific Gravity lpar;Relative Densityrpar; of Plastics by Displacement
ASTM C1735-17 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM B567-98(2009) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
ASTM D1210-96(2004) Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D1210-96 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D3775-02 Standard Test Method for Fabric Count of Woven Fabric
ASTM D3775-03 Standard Test Method for Fabric Count of Woven Fabric
ASTM D7305-08 Standard Test Method for Reflection Density of Printed Matter
ASTM D7305-08a(2020) Standard Test Method for Reflection Density of Printed Matter
ASTM D3800-16 Standard Test Method for Density of High-Modulus Fibers
ASTM D2854-09(2019) Standard Test Method for Apparent Density of Activated Carbon
ASTM D4052-15 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM C1735-17(2021) Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM C1735-11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D7777-12 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM D1217-93(1998) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D792-20 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM C20-00(2010) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM D2591-01 Method of Test for Linear Density of Elastomeric Yarn (Short Length Speciments)
ASTM D1513-99ae1 Standard Test Method for Carbon Black, Pelleted-Pour Density
ASTM D1622-98 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D6937-04 Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D6937-08 Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D8171-18 Standard Test Methods for Density Determination of Flax Fiber
ASTM D6717-07(2018) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D4380-20 Standard Test Method for Determining Density of Construction Slurries
ASTM D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D2726-05a Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726/D2726M-14 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2937-00e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM C729-75(1995)e1 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM C729-75(2000) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D1907-01 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907-97 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907/D1907M-12(2018) Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1875-03(2018) Standard Test Method for Density of Adhesives in Fluid Form
ASTM C729-11(2016) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D1657-89 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer

RU-GOST R, Bulk Density Test Method

GOST EN 1236-2013 Fertilizers. Method of determination of bulk density without loose
GOST 22567.12-1982 Synthetic detergents. Method for determination of flowability
GOST R 50019.1-1992 Graphite. Method for determination of bulk density
GOST 16190-1970 Sorbents. Method for determination of bulk density
GOST 30046-1993 Cereals. Determination of bulk density, called ''mass per hectolitre'' (reference method)
GOST R 51462-1999 Dried milk products. Method for determination of bulk density
GOST 2409-2014 Refractories. Method for determination of bulk density, apparent and true porosity, water absorption
GOST 2409-1980 Refractory materials and articles. Method of water absorption, bulk density, apparent and true porosities determination
GOST 25927-1995 Coke. Determination of bulk density in a small container
GOST 25927-1983 Coal coke. Method of determination of the bulk density in a small container
GOST ISO 6669-2016 Green and roasted coffee. Determination of free-flow bulk density of whole beans. Routine method
GOST 10181.2-1981 Concrete mixture. Test method of determination of density
GOST R EN 13528-2-2010 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Part 2. Specific requirements and test methods
GOST R 57713-2017 Polymer composites. Test methods for determination of density and relative density by displacement

Korean Agency for Technology and Standards (KATS), Bulk Density Test Method

KS L 1624-2017 Testing method for untapped density of fine ceramic powders
KS M 7021-1995 Testing method for thickness and bulk density of paper and paperboard
KS M 7021-1985 Testing method for thickness and bulk density of paper and paperboard
KS F 2346-2017 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS F 2346-1982 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS F 2346-2022 Test method for unconsolidated undrained strength of cohesive soils in triaxial compression test
KS F 2475-1987(1997) METHOD OF TEST FOR UNIT WEIGHT AND AIR CONTENT (GRAVIMETRIC)OF FRESH POLYMER-MODIFIED MORTAR
KS F 2475-1987 METHOD OF TEST FOR UNIT WEIGHT AND AIR CONTENT (GRAVIMETRIC)OF FRESH POLYMER-MODIFIED MORTAR
KS M 0004-2019 Test methods for density and relative density of chemical products
KS F 2593-2009 Standard test method for bulk density of soil
KS E 3065-1996(2001) IRON ORES-DETERMINATION OF DENSITY
KS E 3065-1974 IRON ORES-DETERMINATION OF DENSITY
KS L 6509-2001 Testing method for bulk density of artificial abrasives
KS F 2504-2020 Standard test method for density and water absorption rate of fine aggregates
KS F 2504-1987 Standard test method for density and water absorption rate of fine aggregates
KS L 6509-1974 Testing method for bulk density of artificial abrasives
KS M 1033-2017 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
KS M 7055-2006 TESTING METHOD FOR DENSITY OF PULPWOOD AND WOODCHIPS
KS F 2593-2014 Standard test method for moisture density of soil
KS M 7055-1982 TESTING METHOD FOR DENSITY OF PULPWOOD AND WOODCHIPS
KS F 2901-2008 Test methods for thickness and density of sprayed fire resistive material applied to structural members
KS F 2311-2016(2021) Test method for soil density by the sand replacement method
KS M 7055-1973(2002) TESTING METHOD FOR DENSITY OF PULPWOOD AND WOODCHIPS
KS F 2311-2022 Test method for density of soil in place by sand-cone method
KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2347-2007 Testing method for density of soil in place by the rubber-ballon method
KS F 2347-1982 Testing method for density of soil in place by the rubber-ballon method
KS K ISO 23733:2009 Textiles-Chenille yarns-Test method for the determination of linear density
KS K ISO 23733:2014 Textiles — Chenille yarns — Test method for the determination of linear density

Japanese Industrial Standards Committee (JISC), Bulk Density Test Method

JIS P 8118:1994 Testing method for thickness and bulk density of paper and paperboard
JIS R 1628:1997 Test methods for bulk density of fine ceramic powder
JIS R 6130:2002 Testing method for bulk density of artificial abrasives
JIS K 5101-12-1:2004 Test methods for pigments -- Part 12: Apparent density or apparent specific volume -- Section 1: Loose packing method
JIS P 8014:1994 Testing method for density of pulpwood and woodchips
JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
JIS A 1214:2001 Test method for soil density by the sand replacement method
JIS A 1214:2013 Test method for soil density by the sand replacement method

国家机械工业局, Bulk Density Test Method

JB/T 8264.1-1999 Test method for bulk density of carrier

Group Standards of the People's Republic of China, Bulk Density Test Method

T/CAB 0111-2021 Test method for sheets spreading capability of folding carton sheets
T/REIANM 0302-2022 Sintered NdFeB alloy powder—Determination of Density Part 1 ：Determination of Aerated Bulk density
T/SBX 028-2019 TFT mixed liquid crystal density test method
T/CVIA 113-2023 Dynamic Test Method of Laser Display Speckle Contrast
T/IAWBS 010-2019 Detection method for measuring the surface Detection method for measuring the surface quality and micropipe densityof polished monocrystalline silicon carbide wafers-Laser Scattering Method
T/REIANM 0303-2022 Sintered NdFeB alloy powder—Determination of Density Part 2 ：Determination of Packed Bulk Density

German Institute for Standardization, Bulk Density Test Method

DIN 52102:2006 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calcualtion of the ratio of density
DIN 52102:2013 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
DIN 51918:1999 Testing of carbonaceous materials - Determination of bulk density by buoyancy method and the open porosity by impregnation with water - Solid materials
DIN EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table; German version EN 13286-5:2003
DIN EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value; German version EN 13286-46:2003
DIN EN 1097-3:1998-06 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
DIN EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content; Vibrating hammer; German version EN 13286-4:2003
DIN EN 13286-48:2005 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation; German version EN 13286-48:2005
DIN EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters; German version EN 13286-3:2003
DIN EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume)
DIN EN 12130:2018-10 Feather and down - Test methods - Determination of the fill power (massic volume); German version EN 12130:2018
DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
DIN ISO 5725-3:2003 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction; German version EN 13286-2:2010
DIN EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; introduction and general requirements and sampling; German version EN 13286-1:2003
DIN EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; German version EN 13286-41:2003
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN EN 772-13:2000 Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); German version EN 772-13:2000
DIN EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for determination of the direct tensile strength of hydraulically bound mixtures; German version DIN EN 13286-40:2003
DIN EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003

Association Francaise de Normalisation, Bulk Density Test Method

NF B42-001-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9 : determination of un-tamped bulk density.
NF P98-846-4*NF EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4 : test methods for laboratory reference density and water content - Vibrating hammer
NF P98-846-5*NF EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5 : test methods for laboratory reference density and water content - Vibrating table
NF P18-650-3*NF EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3 : determination of loose bulk density and voids
NF P98-846-46*NF EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46 : test method for the determination of the moisture condition value
NF P98-846-2:2005 Unbound and hydraulically bound mixtures - Part 2 : test methods for the determination of the laboratory reference density and water content - Proctor compaction.
NF P98-846-2*NF EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2 : test methods for laboratory reference density and water content - Proctor compaction.
NF P98-846-48*NF EN 13286-48:2005 Unbound and hydraulically bound mixtures - Part 48 : test method for the determination of degree of pulverisation
NF P15-435:2021 Cement testing methods - Determination of density
NF P12-310/A1*NF EN 1015-10/A1:2007 Methods of test for mortar for masonry - Part 10 : determination of dry bulk density of hardened mortar
NF P12-104*NF EN 772-4:1999 Methods of test for masonry units. Part 4 : determination of real and bulk density and of total and open porosity for natural stone masonry units.
NF D90-206*NF EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume)
NF T40-005*NF ISO 19983:2017 Rubber - Determination of precision of test methods
NF P98-846-1*NF EN 13286-1:2004 Unbound and hydraulically bound mixtures - Part 1 : Test methods for laboratory reference density and water content - Introduction and general requirements.
NF B40-321:1995 Methods of test for dense shaped refractory products. Part 1 : determination of bulk density, apparent porosity and true porosity.
NF P98-846-41*NF EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41 : test method for the determination of the compressive strength of hydraulically bound mixtures.
NF P98-846-3*NF EN 13286-3:2004 Unbound and hydraulically bound mixtures - Part 3 : test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
NF EN 15586:2008 Textiles - Méthodes d'essai des tissus pour l'étanchéité aux fibres : essai par frottement
NF P98-846-40*NF EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40 : test method for the determination of the direct tensile strength of hydraulically bound mixtures.
NF G07-150:1984 Textiles. Tests for fabrics. Method for the determination of the surface density.
NF EN 14831:2005 Éléments de fixation - Aptitude au serrage - Méthode d'essai simplifiée Couple/Angle
NF P98-880-1*NF EN 13880-1:2004 Hot applied joint sealants - Part 1 : test method for the determination of density at 25o C

British Standards Institution (BSI), Bulk Density Test Method

BS DD CEN/TS 15103:2005 Solid biofuels — Methods for the determination of bulk density
BS DD CEN/TS 15103:2006 Solid biofuels - Methods for the determination of bulk density
BS EN 13286-46:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the moisture condition value
BS EN 13286-4:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer
BS EN 13286-5:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table
BS EN 993-1:1995 Methods of test for dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
BS EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids
BS EN 13286-48:2005 Unbound and hydraulically bound mixtures - Test method for the determination of degree of pulverisation
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
BS 1016-108.5:1992 Methods for analysis and testing of coal and coke - Tests special to coke - Determination of density and porosity
BS EN 13286-3:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
BS EN ISO 787-11:1995 General methods of test for pigments and extenders. Determination of tamped volume and apparent density after tamping
BS 1016 Sec.108.5:1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of density and porosity
BS 812-2:1995 Testing aggregates - Methods for determination of density
BS EN 13286-41:2003 Unbound and hydraulically bound mixtures - Test method for determination of the compressive strength of hydraulically bound mixtures
BS EN 12697-7:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-56:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-7:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the bulk density of bituminous specimens by gamma rays
BS EN 12697-48:2021 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-55:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-53:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-54:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 13286-40:2003 Unbound and hydraulically bound mixtures - Test method for determination of the direct tensile strength of hydraulically bound mixtures
BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
BS EN 13286-42:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
BS 4140-10:1986 Methods of test for aluminium oxide. Determination of untamped density
BS EN 13880-1:2003 Hot applied joint sealants - Test method for the determination of density at 25 °C
BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
BS 5711-4:1979 Methods of sampling and test for glycerol - Determination of density and relative density
BS 812 Pt.2:1995 Testing aggregates - Methods for determination of density
BS 5350-B1:1978 Methods of test for adhesives - Determination of density
21/30388650 DC BS ISO 19983. Rubber. Determination of precision of test methods
BS EN 12130:2018 Tracked Changes. Feather and down. Test methods. Determination of the fill power (massic volume)
BS ISO 17785-2:2018 Testing methods for pervious concrete - Density and void content
BS ISO 19983:2022 Tracked Changes. Rubber. Determination of precision of test methods

ZA-SANS, Bulk Density Test Method

SANS 567:2007 Coke - Determination of bulk density in a small container

International Organization for Standardization (ISO), Bulk Density Test Method

ISO 1013:1995 Coke - Determination of bulk density in a large container
ISO 567:1995 Coke - Determination of bulk density in a small container
ISO 567:2021 Coke - Determination of bulk density in a small container
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-3:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 23733:2007 Textiles - Chenille yarns - Test method for the determination of linear density

Standard Association of Australia （SAA）, Bulk Density Test Method

AS 1774.2:2001 Refractories and refractory materials - Physical test methods - Determination of bulk density of granular materials
AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear surface moisture-density gauge - Backscatter mode
AS 1141.4:2000 Methods for sampling and testing aggregates - Bulk density of aggregate
AS/NZS 2891.14.1.2:2013
AS/NZS 4266.4(Int):2001 Reconstituted wood-based panels - Methods of test - Density
AS 4489.10.1:1997 Test methods for limes and limestones - Bulk density - Quicklime and hydrated lime
AS/NZS 2891.14.4:2013
AS 2341.7:1993 Methods of testing bitumen and related roadmaking products - Determination of density using a density bottle
AS/NZS 1301.426s:1994 Methods of test for pulp and paper - Determination of thickness and apparent bulk density or apparent sheet density
AS 1289.5.6.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS 2341.7:1993(R2013)
AS 1289.5.5.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
AS 1289.5.8.5:1998(R2013)
AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1683.4:1992 Methods of test for elastomers - Rubber, vulcanized - Determination of density
AS/NZS 2891.14.2:2013
AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
AS 4133.2.1.1:2005 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and calliper techniques
AS 4133.2.1.2:2005 Methods of testing rocks for engineering purposes - Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and buoyancy techniques

The American Road & Transportation Builders Association, Bulk Density Test Method

AASHTO T 297-1994 Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils
AASHTO T 296-2010 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
AASHTO T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
AASHTO T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods

VN-TCVN, Bulk Density Test Method

TCVN 5227-2007 Coke.Determination of bulk density in a small container
TCVN 5228-2007 Coke.Determination of bulk density in a large container
TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)
TCVN 6355-5-2009 Bricks.Test methods.Part 5: Determination of bulk density.

Professional Standard - Military and Civilian Products, Bulk Density Test Method

WJ 1772.2-1988 Shotgun bullet test method - Scatter density test method for shotgun bullet

European Committee for Standardization (CEN), Bulk Density Test Method

EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
EN 13286-46-2003E Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
prEN 993-1-1993 Methods of test for dense shaped refractory products; part 1: determination of bulk density, apparent porosity and true porosity
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters
EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content; Vibrating hammer
EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table
EN 13286-48:2005 Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
EN 13286-48-2005E Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; Introduction, general requirements and sampling
EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-41:2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
prEN 772-13-1992 Methods of test for masonry units; part 13: determination of net and gross dry density of masonry units
EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
EN 13286-40-2003E Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures

CEN - European Committee for Standardization, Bulk Density Test Method

EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction

Professional Standard - Commodity Inspection, Bulk Density Test Method

SN/T 4237-2015 Methods of testing the filling power for inspection of import and export down and feathers.Multifunctional filling power testing apparatus method

Indonesia Standards, Bulk Density Test Method

SNI 13-3602-1994 Coke, Determination of opponent relative density
SNI 13-3603-1994 Coke, Determination of true relatif density
SNI 1742-2008 Testing methods for light solidity of soils
SNI 06-0427-1989 Plastic materials, Determination of bulk density
SNI 01-0702-1989 Wood, Test method for mass density of woodchips
SNI 6792-2008 Testing methods of soil density in the field by sleeve methods
SNI 19-4956-1998 Test method for relative density, specific gravity and density (of homogeneous liquid)
SNI 19-1129-1989 Test method for gas concentration in welding environment
SNI 14-0700-1998 Test method for mass density of wood for pulp

SE-SIS, Bulk Density Test Method

SIS 20 03 07

TH-TISI, Bulk Density Test Method

TIS 1353.7-1998 Standard test methods for paper and paper board.part 7:determination of thickness and apparent bulk density or apparent sheet density

Professional Standard - Aviation, Bulk Density Test Method

HB 5441.4-1989 Performance testing of powder metallurgy products and powders - Test method for bulk density of metal powders
HB 5351.2-2004 Test method for properties of investment casting slurry-Part 2:The densimeter method for the determination of density

PT-IPQ, Bulk Density Test Method

NP EN 1097-3-2000 Tests for machanical and physical properties of aggregates Part 3:Determination of loose bulk density and voids
NP 3290-1988 Methods of testing windows Water tightness test under static pressure

AENOR, Bulk Density Test Method

UNE-EN 1097-3:1999 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS.
UNE 40241-2:1975 PRECISIONS IN THE METHOD OF DETERMINING THE CONTENT IN CISTERNIC ACID OF HYDROLIZED OF WOOL BY MEANS OF ELECTROPHORESIS ON PAPER AND COLOURIMETRY.
UNE 59535:2007 Footwear. Test methods for soles. Determination of global density.

NZ-SNZ, Bulk Density Test Method

AS/NZS 1580.202.2:1995 Paints and Related Materials - Methods of Test Method 202.2: Density of Water-Dispersed Paints Subject to Foaming
NZS 4407.4.2.2:1991 Methods of sampling and testing road aggregates Test 4.2.2 Method using a nuclear surface moisture-density gauge - Backscatter mode
NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density
NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
NZS 4402.5.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bulk Density Test Method

GB/T 6609.25-2004 Chemical analysis methods and determination of physical performance of alumina Determination of untamped density
GB/T 7962.20-1987 Colourless optical glass test methods--Density
GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
GB/T 611-2006 Chemical reagent-General method for the determination of density
GB/T 611-1988 Chemical reagent--General method for the determination of density
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
GB/T 13216.5-1991 Test methods for glycerines--Determination of density at 20℃
GB/T 6609.25-2023 Methods of chemical analysis and determination of physical properties of alumina - Part 25: Determination of bulk and tapped densities
GB/T 1423-1996 Method of measurement of density for precious metals and their alloys
GB/T 41765-2022 Test method for dislocation density of monocrystalline silicon carbide
GB/T 13477.2-2002 Test method for building sealants Part 2: Determination of density
GB/T 18856.6-2008 Test methods for coal water mixture.Part 6:Determination of density
GB/T 13739-2011 Test methods for laser beam widths,divergence angle and transverse mode
GB/T 12496.1-1999 Test methods of wooden activated carbon-Determination of apparent density
GB/T 6148-1985 Test method for temperature-resistance coefficient of precision resistance alloys
GB/T 6148-2005 Test method for temperature-resistance coefficient of precision resistance alloys
GB/T 7962.20-2010 Test methods of colourless optical glass.Part 20:Density

American National Standards Institute （ANSI), Bulk Density Test Method

ANSI/ASTM F1932/F1932M:1998 Standard Test Method for Measuring Sleeping Bag Loft
ANSI/ASHRAE 145.1-2015 Laboratory Test Method for Assessing the Performance of Gas-Phase Air-Cleaning Systems: Loose Granular Media

YU-JUS, Bulk Density Test Method

JUS C.A2.038-1987 Physical tests of meta/s. Determination ofapparent density ofmetallic povvders. Funnel method
JUS C.A2.039-1987 Physical tests of metafs. ?etermination of apparent density of metallic povvders. Oscillating funnel method
JUS C.A2.037-1987 Phisical tests ofmetafs. Determination ofapparentdensity ofmetallic povvders. Scott volumeter method
JUS B.B8.032-1980 Testing of natural stone. Determination of bulk density, density, coefficient of density, and porosity

Professional Standard - Agriculture, Bulk Density Test Method

NY/T 1817-2009 Test method for wool density on sheep skin Wool stemple method

CZ-CSN, Bulk Density Test Method

CSN 56 0216 Cast.3-1979 Testing methods for wir.os. etermination of density
CSN 66 8102 Cast.2-1989 Smokeless powders. Methods of testing. Determination of density
CSN 66 8102 Cast.2-1997
CSN 56 0210 Cast.3-1981 Testing methods for alcoholic beverages. Determination of density
CSN 49 0162 Cast.2-1985 Testing of properties of particleboards. Density. Testing method for density rangc in board area
CSN 49 0142-1989 Tests of wood based panels. Method of density determination
CSN 66 8102 Cast.3-1978 Smokeless powders. Methods of testing. Determination of bulk density

Professional Standard - Electron, Bulk Density Test Method

SJ/T 10861-1996 Test method for optical density of chromium blanks
SJ/T 11033-1996 Test methods for density of electronic glass - Sink-float comparator method

Danish Standards Foundation, Bulk Density Test Method

DS/EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids

Lithuanian Standards Office , Bulk Density Test Method

LST EN 1097-3-2002 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
LST 1361.7-1995 Mineral aggregates for road construction. Testing methods. Determination of absolute density, dry bulk density, compactness and porosity
LST 1360.6-1995 Soils for road construction. Testing methods. Determination of density of soil

中国气象局, Bulk Density Test Method

QX/T 536-2020 Forward scattering visibility meter test method

NO-SN, Bulk Density Test Method

NS 8011-1982 Geotechnical testing - Laboratory methods - Density

PL-PKN, Bulk Density Test Method

PN C89286-05-1989 Polyethylene Iow density Methods of testing
PN C04404-02-1986 Pigments for paints General methcds of test Determination of density
PN C89085-03-1987 Epoxy resins Methods of testing Determination of density (specific gravity)
PN C04404-03-1986 Pigments for paints General testing methods Determination of bulk density
PN BN 7439-04-1965 Reproduction photography Test methods The marking of optical density
PN P04754-1988 Jet-textured yarn of linear density belo w 1000 dtex Methods of tests

国家市场监督管理总局、中国国家标准化管理委员会, Bulk Density Test Method

GB/T 39688-2020 Test method for determining density of ceramic coatings
GB/T 611-2021 Chemical reagent—General method for the determination of density
GB/T 5252-2020 Test method for dislocation density of monocrystal germanium
GB/T 8760-2020 Test method for dislocation density of monocrystal gallium arsenide
GB/T 13477.2-2018 Test method for building sealants－Part 2：Determination of density

Professional Standard - Non-ferrous Metal, Bulk Density Test Method

YS/T 581.14-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 14:Determination of untamped density
YS/T 617.8-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder.Part 8: Determination of apparent density

CU-NC, Bulk Density Test Method

NC 40-128-1987 Textiles. Determination of Stitch Density. Testing Methods
NC 82-05-5-1984 Wines. Testing Methods. Determination of Relatiy and Absolute Density
NC 33-28-1984 Oil and Oil Derivatives. Determination of Density. Testing Methods
NC 43-33-1987 Artificial and Natural Wood Industry. Natural Wood. Determination of Apparent Density Testing Methods

ES-UNE, Bulk Density Test Method

UNE-EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume) (Endorsed by Asociación Española de Normalización in October of 2018.)

Professional Standard - Machinery, Bulk Density Test Method

JB/T 9141.1-1999 Test method for density of flexible graphite sheets
JB/T 9141.1-2013 Flexible graphite sheets.Part 1: Test method for density

Military Standard of the People's Republic of China-General Armament Department, Bulk Density Test Method

GJB 1047.9-1990 Black powder test method Determination of density
GJB 772.113-1994 Test methods for explosives - Wet method for determination of bulk density
GJB 772.114-1994 Test methods for explosives - Dry method for determination of bulk density
GJB 1047.10-1990 Black powder test method - Determination of false density
GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method
GJB 771.101-1989 Gunpowder Performance Test Methods Determination of Bulk Density
GJB 6612-2008 Test method for aerodynamic force measurements in hypersonic low density wind tunnel
GJB 1047.9A-2020 Test Methods for Black Powder Part 9: Determination of Density
GJB 1047.9A-2004 Test Methods for Black Powder Part 9: Determination of Density

IN-BIS, Bulk Density Test Method

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Bulk Density Test Method

ASHRAE 145.1-2008 Laboratory Test Method for Assessing the Performance of Gas-Phase Air-Cleaning Systems: Loose Granular Media
ASHRAE 145.1-2015 Laboratory Test Method for Assessing the Performance of Gas-Phase Air-Cleaning Systems: Loose Granular Media

SG-SPRING SG, Bulk Density Test Method

SS 323 Pt.A2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part A2 : Determination Of Density By The Density-Gradient Technique

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Bulk Density Test Method

GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method

GOSTR, Bulk Density Test Method

GOST 28725-1990 Instruments for measuring the level of liquids and loose materials. General technical requirements and test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bulk Density Test Method

GB/T 34520.3-2017 Test methods for continuous silicon carbide fiber—Part 3：Linear density and density

Professional Standard - Aerospace, Bulk Density Test Method

QJ 1964-1990 Evaluation Method of Precision and Accuracy of Wind Tunnel Dynamometer Test

AASHTO - American Association of State Highway and Transportation Officials, Bulk Density Test Method

T 191-2002 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
T 191-2014 Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method
T 355-2018 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2016 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 133-1991 Standard Method of Test for Density of Hydraulic Cement (ASTM C188-89)

RO-ASRO, Bulk Density Test Method

STAS 8728/2-1970 POLYVINYL ACETATE AQUEOUS DISPERSIONS Methods of test Determination of wihte point temperature

未注明发布机构, Bulk Density Test Method

DIN EN ISO 4259-1:2020 Petroleum products – Precision of measurement methods and results – Part 1: Determination of precision data of test methods

Professional Standard - Light Industry, Bulk Density Test Method

QB/T 1642-2012 Test method for apparent porosity and bulk density of ceramic body
QB/T 1642-1992 Test method for apparent porosity and bulk density of ceramic body

KR-KS, Bulk Density Test Method

KS K ISO 23733-2014 Textiles — Chenille yarns — Test method for the determination of linear density