ZH
RU
ES

d-peak represented by

d-peak represented by, Total:369 items.

In the international standard classification, d-peak represented by involves: Television and radio broadcasting, Electricity. Magnetism. Electrical and magnetic measurements, Services, Law. Administration, Finances. Banking. Monetary systems. Insurance, Information sciences. Publishing, Standardization. General rules, Testing of metals, Materials for aerospace construction, Aircraft and space vehicles in general, Acoustics and acoustic measurements, Character sets and information coding, Dentistry, Vocabularies, Linear and angular measurements, Analytical chemistry, Valves, Components for aerospace construction, Medical equipment, Electronic component assemblies, Textile machinery, Road engineering, Applications of information technology, Software development and system documentation, Electrical engineering in general, Protection against electric shock, Electronic components in general, Pumps, Water quality, Fertilizers, Quantities and units, Technical drawings, Welding, brazing and soldering, Environmental protection, Electrical equipment for working in special conditions, Mechanical structures for electronic equipment, Internal combustion engines, Nuclear energy engineering, Aerospace electric equipment and systems, Telecommunication systems, Quality, Wastes, Paper and board, Construction materials.

HU-MSZT, d-peak represented by

American National Standards Institute （ANSI), d-peak represented by

ANSI/NEMA MW 1000-2016 Magnet Wire (Incorporated Corrections to Annex D Table D.1@ Table D.2@ and Table D.3)
ANSI/ATIS 0300251A-2020 ATIS Supplement A to ATIS-0300251, Structure for the Representation of Service Providers for Information Exchange
ANSI/INCITS 310-1998 Information Technology - Representation of Time for Information Interchange Replaces ANSI NCITS 310-1998

NEMA - National Electrical Manufacturers Association, d-peak represented by

NEMA MW 1000-2016 Magnet Wire (Incorporated Corrections to Annex D Table D.1@ Table D.2@ and Table D.3)

International Telecommunication Union (ITU), d-peak represented by

ITU-R BS.1771-2006 Requirements for loudness and true-peak indicating meters
ITU-R BS.1771-2012 Requirements for loudness and true-peak indicating meters
ITU-T M.3342-2006 Guidelines for the definition of SLA representation templates Study Group 4
ITU-T X.670-2004 Use of registration agents to register names subordinate to country names in the X.660 RH-name-tree SERIES X: DATA NETWORKS AND OPEN SYSTEM COMMUNICATIONS OSI networking and system aspects Naming Addressing and Registration Study Group 17
ITU-T H.845.11-2015 Conformance of ITU-T H.810 personal health devices: PAN/LAN/TAN interface Part 5K: Peak expiratory flow monitor: Agent (Study Group 16)
ITU-T Y.2770 ERRATUM 1-2013 Requirements for deep packet inspection in next generation networks; Erratum 1

European Committee for Electrotechnical Standardization（CENELEC）, d-peak represented by

HD 479-1986 Oscilloscopes and Peak Voltmeters for Impulse Tests
EN 60051-6:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 6: Special Requirements for ohmmeters (Impedance Meters) and Conductance Meters
EN 62104:2007 Characteristics of DAB receivers (Incorporating corrigendum August 2007)

AGMA - American Gear Manufacturers Association, d-peak represented by

P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth

(U.S.) Ford Automotive Standards, d-peak represented by

FORD ESB-M5H9-F-2000 LAMINATE, NYLON FABRIC/POLYURETHANE FOAM, CHALET PATTERN Supersedes ESB-M5H9-D [Replaced: FORD ESB-M5H9-D, FORD ESB-M5H9-D]
FORD FLTM BN 024-2-2001 FLAMMABILITY TEST FOR AUTOMOTIVE INTERIOR MATERIALS (Replaces ASTM D 1654)
FORD FLTM BN 024-02-2001 FLAMMABILITY TEST FOR AUTOMOTIVE INTERIOR MATERIALS Replaces ASTM D 1654
FORD WE990-1996 SURFACE DISCONTINUITIES OF NUTS
FORD WSK-M4D755-A1-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WA990-2002 Surface Discontinuities of Bolts and Studs Replaces JFS 02.01.07 [Replaced: JAGUAR JFS 02.01.07]
FORD WSE-M97B44-D-2002 COOLANT, ORGANIC ADDITIVE TECHNOLOGY (OAT), CONCENTRATE, FOR PASSENGER CAR AND LIGHT TRUCK ***TO BE USED WITH FORD WSS-M99P1111-A*** [Superseded: FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97
FORD FLTM BJ 113-2-2001 OXIDATION-CORROSION TEST FOR GREASES (MODIFIED ASTM D 942 OXIDATION TEST) (Replaces FLTM BJ 013-02)
FORD WD950 APPENDIX A-1993 MATERIAL AND PERFORMANCE REQUIREMENTS FOR CASE HARDENED CARBON STEEL THREAD CUTTING SCREWS - TYPE D
FORD FLTM BJ 113-02-2001 OXIDATION-CORROSION TEST FOR GREASES (MODIFIED ASTM D 942 OXIDATION TEST) Replaces FLTM BJ 013-02
FORD WSB-M2F177-A-2003 FABRIC, VINYL COATED, MULTI-PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** REPLACES ESB-M2F127-A,B,C,D
FORD WSS-M3H120-A2-2003 CARPET, POLYPROPYLENE, RANDOM VELOUR FUSED BACK ***TO BE USED WITH FORD WSS-M99P1111-A***

Indonesia Standards, d-peak represented by

SNI 04-6628-2001 Oscilloscopes and peak voltmeter for impulse tests
SNI ISO 19145:2016 Informasi geografis - Register representasi lokasi titik geografis

Korean Agency for Technology and Standards (KATS), d-peak represented by

KS X 6301-2008(2013) Codes for the representation of currencies and funds
KS C 5967-1995 Codes for the representation of currencies and funds
KS X 6301-2015 Codes for the representation of currencies and funds
KS X 1510-2-2008(2019) Codes for the representation of names of countries and their subdivisions-Part 2 : country subdivision code
KS M ISO 7553-2007(2012) Fertilizers－Sampling－Minimum mass of increment to be taken to be representative of the total sampling unit
KS X 1510-3-2008(2019) Codes for the representation of names of countries and their subdivisions－Part 3：Code for formerly used names of countries
KS P ISO 16202-1:2021 Dentistry — Nomenclature of oral anomalies —Part 1: Code for the representation of oral anomalies

IN-BIS, d-peak represented by

Federal Aviation Administration (FAA), d-peak represented by

FAA 14 CFR PART 183-2011 Representatives of the administrator

British Standards Institution (BSI), d-peak represented by

BS 6647:1985 Guide to oscilloscopes and peak voltmeters for impulse tests
BS ISO 4217:2015 Codes for the representation of currencies
BS EN 16992:2017 Competency for Customs Representatives
BS EN ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions - Country code
BS 6840-10:1991 Sound system equipment. Methods for specifying and measuring the characteristics of peak programme level meters
BS ISO 4217:2008 Codes for the representation of currencies and funds
BS EN 24217:1994 Codes for the representation of currencies and funds
BS EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions. Country codes
BS EN ISO 3166-1:2006 Codes for the representation of names of countries and their subdivisions - Country codes
PD ISO/TS 21231:2019 Water quality. Characterization of analytical methods. Guidelines for the selection of a representative matrix
BS ISO 3166-3:2013 Codes for the representation of names of countries and their subdivisions. Code for formerly used names of countries
BS ISO 3166-2:2020 Codes for the representation of names of countries and their subdivisions - Country subdivision code
BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
BS EN 4694:2017 Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F
BS ISO 3166-3:2020 Codes for the representation of names of countries and their subdivisions - Code for formerly used names of countries
BS ISO 15924:2022 Information and documentation. Codes for the representation of names of scripts
BS EN ISO 23747:2009 Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
BS ISO 639-4:2010 Codes for the representation of names of languages - General principles of coding of the representation of names of languages and related entities, and application guidelines
BS ISO 639-6:2010 Codes for the representation of names of languages. Alpha-4 code for comprehensive coverage of language variants
BS ISO 639-6:2009 Codes for the representation of names of languages - Alpha-4 code for comprehensive coverage of language variants
BS EN ISO 128-100:2020 Technical product documentation. General principles of representation. Index
19/30391701 DC BS ISO 3166-2. Codes for the representation of names of countries and their subdivisions. Part 2. Country subdivision code
19/30353615 DC BS EN ISO 3166-1. Codes for the representation of names of countries and their subdivisions. Part 1. Country code
BS EN 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. Erosion test method for metal materials with surface processing
19/30391704 DC BS ISO 3166-3. Codes for the representation of names of countries and their subdivisions. Part 3. Code for formerly used names of countries
BS EN 62739-1:2013 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. Erosion test method for metal materials without surface processing
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS EN ISO 2157:2016 Tracked Changes. Dentistry. Nominal diameters and designation code numbers for rotary instruments

Aerospace Industries Association/ANSI Aerospace Standards, d-peak represented by

AIA/NAS NASM28728/5-2010 DIAL, CONTROL, MULTITURN COUNTERS, THREE-DIGITS Rev 1 [Superseded: DLA MIL-D-28728/5 B CANC NOTICE 2, DLA MIL-D-28728/5 B NOTICE 1, DLA MIL-D-28728/5 B, DLA MIL-D-28728/5]
AIA/NAS NASM28728/8-2010 DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, .88 DIAMETER Rev 1 [Superseded: DLA MIL-D-28728/8 B CANC NOTICE 2, DLA MIL-D-28728/8 B NOTICE 1, DLA MIL-D-28728/8 B, DLA MIL-D-28728/8]
AIA/NAS NASM28728/7-2010 DIAL, CONTROL, MULTITURN COUNTERS, 100 - TURN COUNTERS, 4 - DIGIT Rev 1 [Superseded: DLA MIL-D-28728/7 CANC NOTICE 3, DLA MIL-D-28728/7 NOTICE 2, DLA MIL-D-28728/7]
AIA/NAS NASM28728/6-2010 DIAL, CONTROL, MULTITURN COUNTERS, THREE-DIGIT, ILLUMINATED AND NON-ILLUMINATED Rev 1 [Superseded: DLA MIL-D-28728/6 B CANC NOTICE 2, DLA MIL-D-28728/6 B NOTICE 1, DLA MIL-D-28728/6 B, DLA MIL-D-28728/6]
AIA/NAS NASM28728/3-2011 DIAL, CONTROL, MULTITURN COUNTERS, 10 - TURN COUNTER, CONCENTRIC (1.810 - INCH DIAMETER) Rev 1 [Superseded: DLA MIL-D-28728/3 A CANC NOTICE 3, DLA MIL-D-28728/3 A NOTICE 2, DLA MIL-D-28728/3 A, DLA MIL-D-28728/3 (1), DLA MIL-D-28728/3]
AIA/NAS NASM15981-2010 FASTENERS, EXTERNALLY THREADED, SELF-LOCKING DESIGN AND USAGE LIMITATIONS FOR Rev 1 [Superseded: NAVY MS15981 REV D CANC NOTICE 2, NAVY MS15981 REV D VALID NOTICE 1, NAVY MS15981 REV D]
AIA/NAS NASM35140-2011 STRAP, RETAINING, ONE HOLE FOR PIPE, RIGID CONDUIT AND CABLE Rev 1 [Superseded: DLA MS35140 REV D CANC NOTICE 1, DLA MS35140 REV D, DLA MS35140 REV C, DLA MS35140 REV A]

European Committee for Standardization (CEN), d-peak represented by

EN 16992:2017 Competency for Customs Representatives
EN ISO 16202-1:2020 Dentistry - Nomenclature of oral anomalies - Part 1: Code for the representation of oral anomalies (ISO 16202-1:2019)
EN 4694:2017 Aerospace series - Tie rod with integrated bolts - Assembly code D@ E and F
EN ISO 3166-1:2006 Codes for the Representation of Names of Countries and Their Subdivisions - Part 1: Country Codes
prEN 23166-1990 Codes for the representation of names of countries (ISO 3166:1988, edition 3)
prEN 24217-1990 Codes for the representation of currencies and funds (ISO 4217:1990, edition 4)
EN 1966:2002 Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method Supersedes ENV 1966: 1995
PD CEN/TR 16363:2012 Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries
EN ISO 10545-2:1997 Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality Supersedes EN 98: 1991

International Organization for Standardization (ISO), d-peak represented by

ISO 4217:1987 Codes for the representation of currencies and funds
ISO 4217:1981 Title missing - Legacy paper document
ISO 4217:2015 Codes for the representation of currencies
ISO 3166:1988 Codes for the representation of namens of countries
ISO 3166:1993 Codes for the representation of namens of countries
ISO 4217:2008 Codes for the representation of currencies and funds
ISO 4217:2001 Codes for the representation of currencies and funds
ISO 4217:1990 Codes for the representation of currencies and funds
ISO 4217:1995 Codes for the representation of currencies and funds
ISO 3166-2:2020 Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code
ISO/IEC 5218:2004 Information technology - Codes for the representation of human sexes
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions.Part 1: Country codes
ISO 16202-1:2019 Dentistry — Nomenclature of oral anomalies — Part 1: Code for the representation of oral anomalies
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions — Part 1: Country code
ISO 4217:2001/Cor 1:2004 Codes for the representation of currencies and funds; Technical Corrigendum 1
ISO 15924:2004 Information and documentation - Codes for the representation of names of scripts
ISO 3166-3:2020 Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries
ISO/TS 21231:2019 Water quality — Characterization of analytical methods — Guidelines for the selection of a representative matrix
ISO/TR 7553:1987 Fertilizers; Sampling; Minimum mass of increment to be taken to be representative of the total sampling unit
ISO 12803:1997 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
ISO 639-6:2009 Codes for the representation of names of languages - Part 6: Alpha-4 code for comprehensive coverage of language variants
ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results

Association Francaise de Normalisation, d-peak represented by

NF Z09-001*NF EN 16992:2017 Competency for customs representatives
NF K10-020:2005 Codes for the representation of currencies and funds.
NF K10-020:1995 Codes for the representation of currencies and funds.
NF ISO 639-1:2003 Codes pour la représentation des noms de langue - Partie 1 : code alpha-2
NF ISO 639-2:1999 Codes pour la représentation des noms de langue - Partie 2 : code alpha-3
NF EN 4694:2017 Série aérospatiale - Bielle avec axes intégrés - Code assemblage D, E et F
NF Z44-000-1:2007 Codes for the representation of names of countries and their subdivision - Part 1 : country codes.
NF Z44-000-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1 : country codes
NF Z44-000:1997 Codes for the representation of names of countries and their subdivision. Part 1 : country codes.
NF EN ISO 3166-1:2020 Codes pour la représentation des noms de pays et de leurs subdivisions - Partie 1 : codes de pays
NF E05-015/A1:2009 Geometrical Product Specifications (GPS) - Surface texture : profile method - Terms, definitions and surface texture parameters - Amendment 1 : peak count number.
NF L35-104*NF EN 4694:2017 Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F
NF ISO 639-3:2007 Codes pour la représentation des noms de langues - Partie 3 : code alpha-3 pour un traitement exhaustif des langues
NF ISO 639-5:2008 Codes pour la représentation des noms de langue - Partie 5 : code alpha-3 pour les familles de langues et groupes de langues
FD T90-230:2015 Water quality - Characterization of analytical methods - Guide for selection of a matrix representative of a scope of application
NF Z44-000-2:2008 Codes for the representation of names of countries and their subdivision - Part 2 : country subdivision code.
NF Z44-000-2:2014 Codes for the representation of names of countries and their subdivisions - Part 2 : country subdivision code
NF Z44-000-2:2020 Codes for the representation of names of countries and their subdivisions - Part 2 : country subdivision code
NF ISO 3166-2:2020 Codes pour la représentation des noms de pays et de leurs subdivisions - Partie 2 : code pour les subdivisions de pays
NF X03-002-3*NF ISO 639-3:2007 Codes for the representation of names of languages - Part 3 : alpha-3 code for comprehensive coverage of languages
NF Z44-000-3:2014 Codes for the representation of names of countries and their subdivisions - Part 3 : code for formerly used names of countries
NF Z44-000-3:2020 Codes for the representation of names of countries and their subdivisions - Part 3 : Code for formerly used names of countries
NF ISO 3166-3:2020 Codes pour la représentation des noms de pays et de leurs subdivisions - Partie 3 : code pour les noms de pays antérieurement utilisés
NF ISO 5783:2020 Transmissions hydrauliques - Code pour l'identification des plans de pose et des logements de cartouche
NF C93-742-2*NF EN 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead free solder alloy - Part 2 : erosion test method for metal materials with surface processing
NF S91-162-1*NF EN ISO 16202-1:2020 Dentistry - Nomenclature of oral anomalies - Part 1 : code for the representation of oral anomalies
NF C93-742-1*NF EN 62739-1:2014 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1 : erosion test method for metal materials without surface processing

AENOR, d-peak represented by

UNE-EN 16992:2017 Competency for Customs Representatives
UNE 40007:1955 REPRESENTATIVE SIGNS OF TEXTILE MACHINERY. SPINNING.
UNE 40008:1957 REPRESENTATIVE SIGNS OF MACHINERY. TEXTURE (WEAVING).
UNE 40228-2:1974 METHOD TO OBTAIN SUBSAMPLES REPRESENTATIVE OF WOOL WITH ITS SUINT.
UNE 206011:2014 Solar thermal electric plants. Procedure for generating a Representative Solar Year
UNE 40151-4:1974 GENERAL CONVERSION TABLE TO SUBSTITUTE TRADITIONAL NUMBERS OF YARNS BY ROUND OFF VALUES OF TEX SYSTEM.
UNE 40009:2002 TEXTILE MACHINERY. REPRESENTATIVE SIGNS OF TEXTILE MACHINERY. WASHING, BLEACHING, DYEING, FINISHING.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, d-peak represented by

GB/T 12406-2022 Codes for the representation of currencies
GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 12406-1996 Codes for the representation of currencies and funds
GB/T 12406-2008 Codes for the representation of currencies and funds
GB/T 5185-1985 Welding,brazing,braze welding and soldering of metals--List of processes for symbolic representation on drawings
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
GB/T 16833-2002 Electronic data interchange for administration,commerce and transport (EDIFACT)--Code lists

German Institute for Standardization, d-peak represented by

DIN 8304:1989 Hairsprings for watches and clocks; code-numbers
DIN EN 16992:2017-04 Competency for Customs Representatives; German version EN 16992:2017
DIN EN ISO 3166-1:2007 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006); English version of DIN EN ISO 3166-1:2007-03
DIN EN ISO 3166-1:2020-12 Codes for the representation of names of countries and their subdivisions - Part 1: Country code (ISO 3166-1:2020); English version EN ISO 3166-1:2020
DIN EN 4694:2018-04 Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F; German and English version EN 4694:2017
DIN 65079:1987-12 Aerospace; alkaline cleaning of metallic surfaces; code numbers 0020 and 0021
DIN ISO 3166-3:2015-03 Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries (ISO 3166-3:2013) / Note: To be replaced by DIN ISO 3166-3 (in preparation).
DIN 65079:1987 Aerospace; alkaline cleaning of metallic surfaces; code numbers 0020 and 0021
DIN ISO 3166-3:2023 Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries (ISO 3166-3:2020); Text in German and English
DIN ISO 3166-3:2023-03 Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries (ISO 3166-3:2020); Text in German and English / Note: Date of issue 2023-02-03*Intended as replacement for DIN ISO 3166-3 (201...
DIN ISO 3166-3:2023-10 Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries (ISO 3166-3:2020)
DIN EN ISO 3166-1 Berichtigung 1:2008 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006); German version EN ISO 3166-1:2006, Corrigendum to DIN EN ISO 3166-1:2007-03; German version EN ISO 3166-1:2006/AC:2007
DIN EN 62739-2:2017-04 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing (IEC 62739-2:2016); German version EN 62739-2:2016
DIN EN ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions - Part 1: Country code (ISO 3166-1:2020); English version EN ISO 3166-1:2020

AR-IRAM, d-peak represented by

RO-ASRO, d-peak represented by

STAS SR ISO 639:1995 Code for the representation of names of languages
STAS 8780-1986 COOKS FOR THE REPRESENTIATION OF NAMES OF LANGUAGES
STAS 8953-1985 Technical drawings REPRESENTATION OF ROLLING BEARINGS
STAS 9951-1987 Techninal drawings SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES
STAS SR EN 28631-1996 Information technology - Program constructs and conventions for their representation
STAS SR ISO 7518:1996 Tehnical drawings. Construction drawings. Simplified representation of demolition and rebuilding
STAS 9618-1983 Information processing REPRESENTATION OF SI AND OTHER UNITS IN SYSTEMS WITH LIMITED CHARACTER SETS

The Society for Protective Coatings (SSPC), d-peak represented by

SSPC PA 17-2012 Procedure for Determining Conformance to Steel Profile/Surface Roughness/Peak Count Requirements

SSPC - The Society for Protective Coatings, d-peak represented by

PA 17-2012 Procedure for Determining Conformance to Steel Profile/Surface Roughness/Peak Count Requirements

GM North America, d-peak represented by

GM VOL I SEC D-1987 Section D - Table of Contents/Numerical Index
GM GM9220P-1998 Procedure for Color and Finish Inspection Replaced by SAE J361
GM GM6170M-2011 Material and Performance Requirements for Case Hardened (Thread Cutting) Tapping Screws Type D Type F Type T (Issue 3; Do Not Use on New Programs; Replaced by ISO 2702)
GM GM6170M-1989 Material and Performance Requirements for Case Hardened (Thread Cutting) Tapping Screws Type D Type F Type T
GM GM4746M-2011 Diesel Fuel, Grade Low Sulfur No.2-D, Climatized, Factory Fill (Issue 2; Do Not Use on New Programs; No Replacement)

United States Navy, d-peak represented by

NAVY A-A-59216-1998 DITCHING MACHINES, BOOM TYPE; CRAWLER-MOUNTED, DED [Superseded: NAVY OO-D-2747 CANC NOTICE 1, NAVY OO-D-2747]
NAVY MIL-PRF-24667 C-2008 COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION [Superseded: NAVY MIL-D-23003A CANC NOTICE 2, NAVY MIL-D-23003A NOTICE 1, NAVY MIL-D-23003A REINST NOTICE 2, NAVY MIL-D-23003A CANC NOTICE 1, NAVY MIL-D-23003A (1), NAVY MIL-D-23003
NAVY A-A-59241-1998 DISTRIBUTORS, WATER TANK, TRUCK MOUNTED FRONT AND REAR SPRAY [Superseded: NAVY KKK-D-2778 CANC NOTICE 1, NAVY KKK-D-2778]
NAVY MIL-L-19140 E (2)-1997 LUMBER AND PLYWOOD, FIRE-RETARDANT TREATED [Use In Lieu Of: NAVY MIL-L-0019140 D]
NAVY A-A-59244-1998 DRILL, PNEUMATIC DRIFTER, SELF-PROPELLED, CRAWLER MOUNTED (TRACK DRILL) [Superseded: NAVY OO-D-2776 CANC NOTICE 1, NAVY OO-D-2776]
NAVY MIL-T-23991 E INT AMD 2-1979 TRAINING DEVICES, MILITARY; GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-T-0023991 D (1)]
NAVY MIL-STD-3001-1-2001 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) [Superseded: NAVY MIL-DTL-23618 H, NAVY MIL-M-23618 G, NAVY MIL-M-23618 F, NAVY MIL-M-23618 E, NAVY MIL-M-23618 D, NAVY MIL-M-23618

CZ-CSN, d-peak represented by

CSN 01 0182-1977 Code for the representatíon of names of countries
CSN 01 0190-1985 Codes for the representation of names of countries
CSN 46 6164-1978 Performace recording and progcny testing of pigs
CSN 46 7106-1994 Terminology of animal breeding. Performance recording and progeny testing cattle

BE-NBN, d-peak represented by

NBN-ISO 639:1992 Code for the representation of names of languages
NBN-EN 23166-1995

TR-TSE, d-peak represented by

TS 2182-1976 CODES FOR THE REPRESENTATION OF NAMES OF COUNTRIES
TS 3250-1979 DOCUMENTATION - BIBLIOGRAPHICAL REFERENCES ABBREVIATIONS OF TYPICAL WORDS

Defense Logistics Agency, d-peak represented by

DLA A-A-59376-1999 DRILLING MACHINE, RADIAL, BENCH-MOUNTED, SLIDING ARM AND SWIVEL-HEAD, HAND-FEED [Superseded: DLA MIL-D-45815 E CANC NOTICE 1, DLA MIL-D-45815 E, DLA MIL-D-45815 D VALID NOTICE 1, DLA MIL-D-45815 D, DLA MIL-D-45815 C (1), DLA MIL-D-45815 C, DLA MIL
DLA MIL-DTL-8834 H-2005 SWITCHES, TOGGLE, POSITIVE BREAK, GENERAL SPECIFICATION FOR [Use In Lieu Of: DLA MIL-S-008834 D SUPP 1]
DLA A-A-59568-2001 GAGES, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE [Superseded: DLA GG-G-91 D CANC NOTICE 2, DLA GG-G-91 D VALID NOTICE 1, DLA GG-G-91 D, DLA GG-G-91 C, DLA GG-G-91 B INT AMD 2, DLA GG-G-91 B]
DLA A-A-59564-2001 CONTAINERS, FLUID, FOR PAINT SPRAY EQUIPMENT [Superseded: DLA RR-C-550 D CANC NOTICE 1, DLA RR-C-550 D (1), DLA RR-C-550 D, DLA RR-C-550 C, DLA RR-C-550 B, DLA RR-C-550 A, DLA RR-C-550 (1), DLA RR-C-550]

US-CFR-file, d-peak represented by

CFR 7-2.31-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart D: Delegations of authority to other general officers and agency heads. Section2.31:General counsel.
CFR 7-2.28-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart D: Delegations of authority to other general officers and agency heads. Section2.28:Chief financial officer.
CFR 7-2.29-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart D: Delegations of authority to other general officers and agency heads. Section2.29:Chief economist.
CFR 7-2.30-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart D: Delegations of authority to other general officers and agency heads. Section2.30:Director, office of budget and program analysis
CFR 7-2.37-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart D: Delegations of authority to other general officers and agency heads. Section2.37:Director, office of small and disadvantaged bus
CFR 7-2.38-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart D: Delegations of authority to other general officers and agency heads. Section2.38:Director, office of tribal relations.
CFR 11-110.14-2014 Federal elections. Part110:Contribution and expenditure limitations and prohibitions. Section110.14:Contributions to and expenditures by delegates and delegate committees.
CFR 14-1204.503-2014 Aeronautics and Space. Part1204:Administrative authority and policy. Subpart5:Delegations and Designations. Section1204.503:Delegation of authority to grant easements.
CFR 18-389.101-2015 Conservation of power and water resources. Part389:OMB control numbers for commission information collection requirements. Section389.101:OMB control numbers assigned pursuant to the Paperwork Reduction Act.
CFR 10-490.307-2014 Energy. Part490:Alternative fuel transportation program. SubpartD:Alternative Fuel Provider Vehicle Acquisition Mandate. Section490.307:Process for granting exemptions.

VN-TCVN, d-peak represented by

TCVN 6558-2008 Codes for the representation of currencies and funds
TCVN 7217-1-2007 Codes for the representation of names of countries and their subdivisions.Part 1: Country codes

YU-JUS, d-peak represented by

JUS I.B8.002-1989 Codes for the representatioa of currencies and fuu?s
JUS I.B8.002/1-1991 Codes for representation of currencies and funds. Amendments
JUS I.B8.002/4-1993 Codes for representation of currencies and funds - Amendments
JUS I.B8.002/5-1993 Codes for the representation of currencies and funds - Amendments
JUS U.E8.018-1981 Determination of representative value of transient deflactin for flexible pavements

Danish Standards Foundation, d-peak represented by

DS/ISO 4217:1983 Codes for the representation of currencies and funds
DS/ISO 4217/Corr. 1:2008 Codes for the representation of currencies and funds
DS/ISO 4217:2008 Codes for the representation of currencies and funds
DS/EN ISO 3166-1/AC:2010 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes
DS/EN ISO 3166-1:2010 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes
DS/ISO 3166-3:1999 Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries
DS/ISO 639-5:2008 Codes for the representation of names of languages - Part 5: Alpha-3 code for language families and groups
DS/ISO 3166-2:2008 Codes for the representation of names of countries and their subdivisions - Part 2: Country subdivision code
DS/ISO 639-3:2007 Codes for the representation of names of languages - Part 3: Alpha-3 code for comprehensive coverage of languages
DS/ISO 639-6:2010 Codes for the representation of names of languages - Part 6: Alpha-4 code for comprehensive coverage of language variants

ZA-SANS, d-peak represented by

SANS 4217:2009 Codes for the representation of currencies and funds
SANS 3166-1:2007 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
SANS 528-3:2008 Codes for the representation of names of languages Part 3: Alpha-3 code for comprehensive coverage of languages

ES-UNE, d-peak represented by

UNE-ISO 639-1:2022 Codes for the representation of names of languages. Part 1: Alpha-2 code.
UNE-ISO 639-2:2022 Codes for the representation of names of languages. Part 2: Alpha-3 code.
UNE-ISO 639-5:2022 Codes for the representation of names of languages. Part 5: Alpha-3 code for language families and groups.
UNE-EN ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions - Part 1: Country code (ISO 3166-1:2020) (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN 4694:2017 Aerospace series - Tie Rod with integrated bolts - Assembly Code D, E and F (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-ISO 639-3:2022 Codes for the representation of names of languages. Part 3: Alpha-3 code for comprehesive coverage of languages.
UNE-EN 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing (Endorsed by AENOR in November of 2016.)

ES-AENOR, d-peak represented by

Standard Association of Australia （SAA）, d-peak represented by

AS/NZS 2632.2:1999 Codes for the representation of names of countries and their subdivisions - Country subdivision code
AS/NZS 2632.3:1999 Codes for the representation of names of countries and their subdivisions - Codes for formerly used names of countries
AS/NZS 2632.1:2020 Codes for the representation of names of countries and their subdivisions, Part 1: Country code
AS/NZS ISO 15924:2022 Information and documentation — Codes for the representation of names of scripts
AS/NZS 2632.2:2020 Codes for the representation of names of countries and their subdivisions, Part 2: Country subdivision code
IEC 60529:1989+AMD1:1999 CSV/COR2:2007 Corrigendum 2 — Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989+AMD1:1999 CSV/COR3:2009 Corrigendum 3 — Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989+AMD1:1999 CSV/COR1:2003 Corrigendum 1 — Degrees of protection provided by enclosures (IP Code)
AS/NZS 2632.3:2020 Codes for the representation of names of countries and their subdivisions, Part 3: Code for formerly used names of countries

PL-PKN, d-peak represented by

PN M01133-1992 Technical drawings. Representation of splines and serrations
PN M01137-1978 Technical drawings. Conventional representation of gears and chain wheels
PN-EN ISO 3166-1-2021-03 E Codes for the representation of names of countries and their subdivisions -- Part 1: Country code (ISO 3166-1:2020)
PN M42007-04-1989 Industrial automation and measurements ymbolic representation on diagrams dditional graphical symbols
PN M01120-1988 Engineering drawing. Simplification drawings. Representation and designation of centre holes
PN M42007-02-1990 |lndustrial automation and measurements ymbolic representation on diagrams esignations for computer system unctions
PN M01117-03-1992 Engineering drawings. Simplified drawings of seals. Static seals. Simplified representation

未注明发布机构, d-peak represented by

BS 6840-10:1991(1999)*IEC 268-10:1991 Sound system equipment — Part 10 : Methods for specifying and measuring the characteristics of peak programme level meters

SE-SIS, d-peak represented by

SIS SMS 668-1944

SG-SPRING SG, d-peak represented by

TR 3-2001 Performance of Managing Agents for private sector residential properties

NL-NEN, d-peak represented by

NEN-ISO 4217:1994 Codes for the representation of currencies and funds (ISO 4217:1990)

CENELEC - European Committee for Electrotechnical Standardization, d-peak represented by

DD ENV 50 269-1997 Assessment and Representative Testing of High-Voltage Machines

ESDU - Engineering Sciences Data Unit, d-peak represented by

TD MEMO 6511 A-1969 A method for estimating the pressure distribution between the crest and the trailing edge on the surface of an aerofoil section in a sonic stream.

国家市场监督管理总局、中国国家标准化管理委员会, d-peak represented by

GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy

Lithuanian Standards Office , d-peak represented by

LST ISO 639-2:2003 Codes for the representation of names of languages. Part 2: Alpha-3 code (idt ISO 639-2:1998)
LST ISO 639-1:2003 Codes for the representation of names of languages. Part 1: Alpha-2 code (idt ISO 639-1:2002)
LST EN ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015)
LST ISO 4217:2008 Codes for the representation of currencies and funds (ISO 4217:2008, identical)
LST ISO 3166-3:2002 Codes for the representation of names of countries and their subdivisions. Part 3: Code for formerly used names of countries (idt ISO 3166-3:1999)
LST EN ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions - Part 1: Country code (ISO 3166-1:2020)
LST EN ISO 3166-1:2007 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006)
LST ISO 4217:2008/AC1:2008 Codes for the representation of currencies and funds (ISO 4217:2008/Cor.1:2008)
LST ISO 3166-2:2008 Codes for the representation of names of countries and their subdivisions - Part 2: Country subdivision code (ISO 3166-2:2007, identical)
LST EN ISO 3166-1:2007/AC:2008 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006/Cor 1:2007)

IT-UNI, d-peak represented by

National Aeronautics and Space Administration (NASA), d-peak represented by

NASA-TP-2256-1984 Natural laminar flow experiments on modern airplane surfaces
NASA NPD 1371.5 REV B-1999 Coordination and Authorization of Access by Foreign Nationals and Foreign Representatives to NASA
NASA NPD 9050.3 REV F-2007 Administrative Control of Appropriations and Funds [Superseded: NASA NASA NPD 7000.3 REV E, NASA NASA NPD 7000.3 REV D]
NASA NACA-TM-737-1934 Conversion of energy in cross-sectional divergences under different conditions of inflow

IX-ECMA, d-peak represented by

ECMA TR 105-2012 A Shaped Noise File Representative of Speech (1st Edition)

ECMA - European Association for Standardizing Information and Communication Systems, d-peak represented by

TR 105-2012 A Shaped Noise File Representative of Speech (1st Edition)

U.S. Military Regulations and Norms, d-peak represented by

ARMY MIL-P-13041 E VALID NOTICE 2-2004 PROJECTILE, 4.2 INCH, SMOKE, M328A1, WP FILLING [Use In Lieu Of: ARMY MIL-P-0013041 D]
ARMY XX-D-385 E-1982 DISPENSING PUMP, HAND DRIVEN, LIQUID PETROLEUM FUEL [Use In Lieu Of: ARMY XX-D-00385 A]

Institute of Interconnecting and Packaging Electronic Circuits (IPC), d-peak represented by

IPC 2251-2003 Design Guide for the Packaging of High Speed Electronic Circuits

Professional Standard - Textile, d-peak represented by

FZ/T 90069-1995 Requirements for the size of the fillet radius represented by the graphics at the junction of the surface of the part

American Society for Testing and Materials (ASTM), d-peak represented by

ASTM E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1337-90 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM D8008-15 Standard Practice for Representative Field Sampling of Traffic Paints
ASTM D6044-96(2015) Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D6044-96 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D6044-96(2003) Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D6044-21 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D6044-96(2009) Standard Guide for Representative Sampling for Management of Waste and Contaminated Media

Aerospace, Security and Defence Industries Association of Europe (ASD), d-peak represented by

ASD-STAN PREN 4059-2001 Aerospace Series Filler Rods and Filler Wires for Welding in Steel Diameter 0,5 mm Less Than or Equal to D Less Than or Equal to 5,0 mm Dimensions (Edition P 2; Supersedes Edition P 1: November 1997;)
ASD-STAN PREN 4694-2012 Aerospace series Tie rod with integrated bolts Assembly code D, E and F Edition P 1
ASD-STAN PREN 4694-2015 Aerospace series Tie rod with integrated bolts Assembly code D, E and F (Edition P 2)

AT-ON, d-peak represented by

OENORM EN ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions - Part 1: Country code (ISO 3166-1:2020)

CH-SNV, d-peak represented by

SN EN ISO 3166-1:2021 Codes for the representation of names of countries and their subdivisions - Part 1: Country code (ISO 3166-1:2020)

International Electrotechnical Commission (IEC), d-peak represented by

IEC 60529:1989/AMD2:2013/COR1:2013 Corrigendum 1 - Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/AMD1:1999/COR3:2009 Corrigendum 3 - Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/AMD1:1999/COR1:2003 Corrigendum 1 - Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/AMD1:1999/COR2:2007 Corrigendum 2 - Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/AMD2:2013/COR2:2015 Corrigendum 2 - Degrees of protection provided by enclosures (IP Code)
IEC 60062:2016/COR1:2016 Corrigendum 1 - Marking codes for resistors and capacitors
IEC 60079-1:2014/ISH1:2020 Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-1:2014/COR1:2018 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"; Corrigendum 1
IEC 60529:1989/AMD2:2013/COR1:2019 Corrigendum 1 - Amendment 2 - Degrees of protection provided by enclosures (IP Code)
IEC TR 62096:2009 Nuclear power plants - Instrumentation and control important to safety - Guidance for the decision on modernization

US-DOT, d-peak represented by

DOT 49 CFR PART 1325-2010 EXTENSION OF CREDIT TO CANDIDATES FOR FEDERAL OFFICE OR THEIR REPRESENTATIVES

US-FCR, d-peak represented by

FCR FED PUB(OS)73-95-1973 REPRESENTATIVE CONSTRUCTION COSTS HIGHER EDUCATION ACADEMIC FACILITIES
FCR FED PUB(OS)74-6-1974 REPRESENTATIVE CONSTRUCTION COSTS OF HOSPITALS AND RELATED HEALTH FACILITIES
FCR COE ER 380-1-18-1996 TECHNOLOGY TRANSFER, DISCLOSURE OF INFORMATION AND CONTACTS WITH FOREIGN REPRESENTATIVES
FCR COE EP 415-1-261 VOL 2-1992 QUALITY ASSURANCE REPRESENTATIVE'S GUIDE PILE DRIVING, DAMS, LEVEES AND RELATED ITEMS
FCR COE EP 415-1-261 VOL 3-1992 QUALITY ASSURANCE REPRESENTATIVE'S GUIDE ARCHITECTURAL AND STRUCTURAL FEATURES IN BUILDING CONSTRUCTION

Professional Standard - Civil Aviation, d-peak represented by

AP-183-03-1995 Procedures for Appointment and Management of Appointed Representatives for Maintenance Supervision
AP-21-13-1998 Work procedures for production supervision on behalf of foreign airworthiness authorities
AP-183-06-1997 Procedures for Appointing and Administering Appointed Representatives of Maintenance Personnel Licensing Examiners

American Petroleum Institute (API), d-peak represented by

API RP 5SI-2006(2012) Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, d-peak represented by

PREN 4694-2015 Aerospace series Tie rod with integrated bolts Assembly code D@ E and F (Edition P 2)
PREN 4694-2012 Aerospace series Tie rod with integrated bolts Assembly code D@ E and F (Edition P 1)

Canadian General Standards Board （CGSB), d-peak represented by

CGSB 4.159-75-CAN/CGSB-1975 Universal System for Designating Linear Density (Tex System)
CGSB 4.160-75-CAN/CGSB-1975 Integrated Conversion Table for Replacing Traditional Yarn Numbers by Rounded Values in the Tex System, Standard for

Society of Automotive Engineers (SAE), d-peak represented by

SAE GEIASTD0006-2008 Requirements for Using Solder Dip to Replace the Finish on Electronic Piece Parts
SAE ARINC442-2005 GUIDELINES FOR THE SUPPLY OF CHART DRIVEN MODELS/SOURCE CODE FOR TRAINING PURPOSES
SAE AMS-I-7444-1998 Insulation Sleeving, Electrical, Flexible [Superseded: AIR FORCE MIL-I-7444 D CANC NOTICE 3, AIR FORCE MIL-I-7444D NOTICE 2, AIR FORCE MIL-I-7444D (2), AIR FORCE MIL-I-7444D VALID NOTICE 1, AIR FORCE MIL-I-7444D (1), AIR FORCE MIL-I-7444D, AIR FORCE MI

IETF - Internet Engineering Task Force, d-peak represented by

RFC 6019-2010 BinaryTime: An Alternate Format for Representing Date and Time in ASN.1
RFC 7700-2015 Preparation@ Enforcement@ and Comparison of Internationalized Strings Representing Nicknames
RFC 8266-2017 Preparation@ Enforcement@ and Comparison of Internationalized Strings Representing Nicknames
RFC 7385-2014 IANA Registry for P-Multicast Service Interface (PMSI) Tunnel Type Code Points

The American Road & Transportation Builders Association, d-peak represented by

AASHTO M 242M/M 242-2012 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Superseded: AASHTO M 242M]

AASHTO - American Association of State Highway and Transportation Officials, d-peak represented by

T 73-2003 Standard Method of Test for Flash Point by Pensky-Martens Closed Cup Tester (ASTM Designation: D 93-02a; No Replacement)
T 47-1998 Standard Method of Test for Loss on Heating of Oil and Asphaltic Compounds (ASTM Designation: D 6-95 (2000); No Replacement)

American Society of Mechanical Engineers (ASME), d-peak represented by

ASME SI-9 Errata-1982 Guide for metrication of codes and standards SI (metric) units
ASME 2324-2001 Use of Automated Ultrasound Leak Detection System in Lieu of Visual Inspections Required by UG-100(d) Section VIII, Division 1
ASME SEC II D APPENDIX 8-2001 Appendix 8 Applying Linear Interpolation to the Section II, Part D Tables to Determine the Metric Values

American Gear Manufacturers Association, d-peak represented by

AGMA 9009-D02-2002 Flexible Couplings - Nomenclature for Flexible Couplings
AGMA 92FTM9-1992 Representative Form Accuracy of Gear Tooth Flanks on the Prediction of Vibration and Noise of Power Transmission

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, d-peak represented by

ITU-T H.845.11-2016 Conformance of ITU-T H.810 personal health devices: PAN/LAN/TAN interface Part 5K: Peak expiratory flow monitor: Agent (Study Group 16)

U.S. Air Force, d-peak represented by

AIR FORCE MIL-T-25624 G ADMIN NOTICE 2-2005 TRANSMITTER, PRESSURE, TRU-80/A, OIL ENGINE-MOUNTED, 0-100 PSI [Use In Lieu Of: AIR FORCE MIL-T-0025624 D (1)]

Alliance of Telecommunications Industry Solutions （ATIS), d-peak represented by

ATIS 0300220-2005 Representation of the Communications Industry Manufacturers, Suppliers, and Related Service Companies for Information Exchange [Superseded: ATIS 0322000]
ATIS 0300251A-2020 ATIS Supplement A to ATIS-0300251, Structure for the Representation of Service Providers for Information Exchange
ATIS 0300223-2009 Structure and Representation of Network Channel (NC) and Network Channel Interface (NCI) Codes for Information Exchange Pre-Pub [Superseded: ATIS T1.223]

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., d-peak represented by

IEEE 21-1964 Requirements and Test Code for OUTDOOR APPARATUS BUSHINGS (Includes ERRATA)
IEEE 1528 ERTA-2013 Errata to IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

ITE - Institute of Transportation Engineers, d-peak represented by

LP-629-2001 Alternative Treatments for At-Grade Pedestrian Crossings (Errata: 7/9/2003)

IFI/FASTNR - Industrial Fastener Institute, d-peak represented by

533-1982 Surface Discontinuities on Metric Nuts (Superseded by ASTM F 812/F 812M)

Society of Motion Picture and Television Engineers (SMPTE), d-peak represented by

SMPTE 278M-1996 Television Digital Recording - 19-mm Type D-6 - Content of Helical Data and Time and Control Code Records
SMPTE ST 278M-1996 Television Digital Recording - 19-mm Type D-6 - Content of Helical Data and Time and Control Code Records

ECIA - Electronic Components Industry Association, d-peak represented by

EIA-364-71B-2001 TP-71b Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets (Revision of EIA-364-71A; Errata July 13@ 2001)

Institute of Electrical and Electronics Engineers (IEEE), d-peak represented by

IEEE/ASTM SI 10/COR-2013 Errata to American National Standard for Metric Practice

RU-GOST R, d-peak represented by

GOST R 56056-2014 Procedure for definition of representative sample at certification of management systems of the organizations with multiple sites
GOST R 7.0.15-2013 System of standards for information, librarianship and publishing. Codes for the representation of names of scripts

PH-BPS, d-peak represented by

PNS ISO 16202-1:2021 Dentistry - Nomenclature of oral anomalies - Part 1: Code for the representation of oral anomalies

KR-KS, d-peak represented by

KS P ISO 16202-1-2021 Dentistry — Nomenclature of oral anomalies —Part 1: Code for the representation of oral anomalies

Japanese Industrial Standards Committee (JISC), d-peak represented by

JIS C 62739-1:2015 Test method for erosion of wave soldering equipment using molten lead-free solder alloy -- Part 1: Erosion test method for metal materials without surface processing

Instrument Society of America (ISA), d-peak represented by

ISA 67.06.01-2002 Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants

GB-REG, d-peak represented by

REG 29 CFR PART 44-2011 PROCESS FOR ELECTING STATE AGENCY EMPLOYMENT STATISTICS REPRESENTATIVES FOR CONSULTATIONS WITH DEPARTMENT OF LABOR

US-GSA, d-peak represented by

GSA AA-F-358 H INT AMD 2-2001 FILING CABINET, LEGAL AND LETTER SIZE, UNINSULATED, SECURITY
GSA AA-F-358 H-2000 FILING CABINET, LEGAL AND LETTER SIZE, UNINSULATED, SECURITY

ANSI - American National Standards Institute, d-peak represented by

X3.32-1973 GRAPHIC REPRESENTATION OF THE CONTROL CHARACTERS OF AMERICAN NATIONAL STANDARD CODE FOR INFORMATION INTERCHANGE

API - American Petroleum Institute, d-peak represented by

API BULL S2-1928 OFFICIAL LIST A. P. I. PUBLICATIONS ON STANDARDS@ CODES@ AND POSTERS (Fifth Edition)

IEC - International Electrotechnical Commission, d-peak represented by

PAS 62212-2001 "Specification and Characterization Methods for Nonwoven ""E"" Glass Mat (Edition 1.0; No Replacement)"

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., d-peak represented by

ASHRAE D-MECP15-2-2014 Modeling and Energy Consumption with Parallel and Series VAV Terminal Units with ECM and PSC Motors (Third Edition; Product Code: D-MECP15-2)