ZH
RU
ES

Drop hammer impact test bench

Drop hammer impact test bench, Total:379 items.

In the international standard classification, Drop hammer impact test bench involves: Mechanical testing, Standardization. General rules, Paints and varnishes, Plastics, Waxes, bituminous materials and other petroleum products, Equipment for the chemical industry, Rubber and plastics products, Protection of and in buildings, Petroleum, petroleum products and natural gas handling equipment, Testing of metals, Protection against dangerous goods, Equipment for the rubber and plastics industries, Reinforced plastics, Pipeline components and pipelines, Glass, Vibrations, shock and vibration measurements, Protective equipment, Cases. Boxes. Crates, Ground service and maintenance equipment, Footwear, Products of the chemical industry, Raw materials for rubber and plastics, Elements of buildings, Environmental testing, Road engineering, Analytical chemistry, Freight distribution of goods, Structure and structure elements, Electrical and electronic testing, Vibration and shock with respect to human beings, Hand-held tools, Construction materials, Insulating materials, Packaging and distribution of goods in general, Cellular materials, Ceramics, Linear and angular measurements, Test conditions and procedures in general, Installations in buildings, Products of the textile industry, Electromechanical components for electronic and telecommunications equipment, Materials and components for railway engineering.

Professional Standard - Light Industry, Drop hammer impact test bench

QB/T 2918-2007 Case and bag.Test method for impact resistance by means of falling weight

National Metrological Verification Regulations of the People's Republic of China, Drop hammer impact test bench

JJG 541-2005 Falling Body Type Shock Testing Machines
JJG 541-1988 Verification Regulation of Body Type Shock Testing Machine
JJG 1174-2021 Shock and Bump Testing Machines
JJG 145-1982 Verification Regulation of Pendulum Impact Testing Machine
JJG 145-2007 Pendulum Impact Testing Machines
JJG 931-1998 Verification Regulation of Instruments for Measuring Monent of Pendulum of Impact Tester
JJG(轻工) 15-1989 Verification rules for bicycle pedal shaft impact test bench

Professional Standard - Machinery, Drop hammer impact test bench

JB/T 12275-2015 Drop-weight impact testing machines used for metallic materials
JB/T 9389-2008 Specification for falling weight impact testing machines used for non-metallic materials
JB/T 7406.3-1994 Testing machine terminology - Vibration table and shock table
JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions

National Metrological Technical Specifications of the People's Republic of China, Drop hammer impact test bench

JJF 1445-2014 Calibration Specification for Falling Weight Impact Testing Machines
JJF 1300-2011 Program of Pattern Evaluation of Pendulum Impact Testing Machines
JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine
JJF 1320-2011 Calibration Specification for Instrumented Charpy Pendulum Impact Testing Machines

Taiwan Provincial Standard of the People's Republic of China, Drop hammer impact test bench

CNS 13784-1996 General Rules for Testing Impact Strength of Rigid Plastic by the Falling Weigth Method
CNS 10703-1993 Method of Pendulum Impact Test for Bumpers of Passenger Cars
CNS 13335-1994 Method of Test for Dart Impact Resistance of Plastic Films and Sheets
CNS 2999-2004 Packaging－Complete, filled transport packages－Vertical impact test by dropping

British Standards Institution (BSI), Drop hammer impact test bench

BS 3900-E3:1973 Methods of test for paints - Impact (falling weight) resistance
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS EN ISO 13802:2015 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
BS EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
BS EN ISO 148-1:2010 Metallic materials. Charpy pendulum impact test. Test method
BS EN ISO 148-2:2009 Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Verification of testing machines
BS EN 10045-2:1993(1999) Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
PAS 170-1:2017 Vehicle security barriers. Low speed impact testing. Trolley impact test method for bollards
BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS EN ISO 28927-10:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Percussive drills, hammers and breakers
BS EN ISO 148-2:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-3:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS EN ISO 148-1:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Test method
BS ISO 29584:2015 Glass in building. Pendulum impact testing and classification of safety glass
BS EN 12600:2002(2010) Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN 22248:1993 Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping
BS EN ISO 14556:2023 Tracked Changes. Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
BS EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Impact tests (free connectors) - Test 7a - Free fall (repeated)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Drop hammer impact test bench

GB/T 14153-1993 General test method for impact resistance of rigid plastics by means of falling weight
GB 11548-1989 Test method for impact resistance of rigid plastic sheets (dropping weight method)
GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
GB/T 27863-2011 Packaging for dangerous goods.The requirement for impact surface of impact test by dropping
GB/T 3808-2002 Verification of pendulum-type impact testing machines(ISO 148-2:1998,Metallic materials--Charpy pendulum impact test--Part 2: Verification of test machines,MOD)
GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter
GB/T 8809-2015 Pendulum impact resistance of plastic film
GB/T 8809-1988 Test method for pendulum impact resistance of plastic films
GB/T 21189-2007 Verification of pendulum impact-testing machines used for charpy,lzod and tensile impact-testing of plastics
GB/T 229-2007 Metallic materials- Charpy pendulum impact test method
GB/T 18658-2002 Charpy V reference test pieces for verification of pendulum-type impact testing machines (ISO 148-3:1998,Metallic materials--Charpy pendulum impact test--Part 3: Preparation and characterization of charpy V reference test pieces for verification of test
GB/T 19748-2005 Steel.Charpy V-notch pendulum impact test.Instrumented test method
GB/T 18658-2018 Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines
GB/T 9639-1988 Plastics-Film and sheeting-Determination of impact resistance--Free falling dart method

Professional Standard - Petroleum, Drop hammer impact test bench

SY 0040-2013 Test method for impact resistance of pipeline anti-corrosion coating (drop weight test method)
SY/T 0040-2013 Test method for impact resistance of pipeline coatings.(Falling weight test)
SY/T 0040-1997 Test method for impact resistance of pipeline caotings(Falling weight test)

Korean Agency for Technology and Standards (KATS), Drop hammer impact test bench

KS F 2379-2017(2022) Testing method for deflections with a falling-weight-type impulse load device
KS F 2379-2017 Testing method for deflections with a falling-weight-type impulse load device
KS M ISO 13802-2016(2021) Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS B ISO 148-2:2004 Metallic materials-Charpy pendulum impact test-Part 2:Verification of test machines
KS B ISO 148-2:2013 Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS M ISO 6272-2-2013(2018) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2018) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS M ISO 13802:2012 Plastics-Verification of pendulum impact-testing machines-Charpy, Izod and tensile impact-testing
KS M ISO 13802:2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS B 5546-2003(2018)
KS B 5546-1993
KS D ISO 148-1:2007 Metallic materials-Charpy pendulum impact test-Part 1:Test method
KS D ISO 148-1:2015 Metallic materials-Charpy pendulum impact test-Part 1:Test method
KS W 2549-2002(2012) Tests, impact, shock absorber landing gear, aircraft
KS W 2549-1982 Tests, impact, shock absorber landing gear, aircraft
KS W 2549-1987 Tests, impact, shock absorber landing gear, aircraft
KS B 5546-2003 Pendulum－Type impact testing machines for non－metallic materials
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS C 0239-1995(2015) Environmental testing Part 2:Test methods Test Eg:Impact, spring hammer.
KS D ISO 148-1-2007(2012) Metallic materials－Charpy pendulum impact test－Part 1：Test method
KS B ISO 14556-2002(2012) Steel－Charpy V－notch pendulum impact test－Instrumented test method
KS T ISO 2248:2009 Packaging－Complete, filled transport packages－Vertical impact test by dropping
KS B 8301-2011 Landing doors impact force test for lifts-Method and procedures

工业和信息化部, Drop hammer impact test bench

HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing
JB/T 13810-2020 Instrumented Charpy Pendulum Impact Testing Machine

Standard Association of Australia （SAA）, Drop hammer impact test bench

AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)
AS/NZS 2512.3.2:1997 Methods of testing protective helmets - Determination of impact energy attenuation - Striker drop test
AS 2582.4:2003 Complete, filled transport packages - Methods of test - Vertical impact test by dropping
AS 2001.2.8:2001 Methods of test for textiles - Physical tests - Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf)

Professional Standard - Chemical Industry, Drop hammer impact test bench

HG/T 3213-1987 Drop impact test of polypropylene pall packing

American Society for Testing and Materials (ASTM), Drop hammer impact test bench

ASTM G14-04 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2018) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM G14-04(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM E680-79(1999) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
ASTM E680-79(2018) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D3420-14 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-08a Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-21 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-95(2002) Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-08 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D7136/D7136M-15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM D256-10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D8161-17 Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM G13/G13M-13 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
ASTM G13/G13M-21 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
ASTM D5487-16 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM C1870-18 Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D5487-16(2022) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D1709-04 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-03 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM G13-89(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test) (Withdrawn 2003)
ASTM D4272-99 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D2463-10a Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM F3007-19 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
ASTM D1709-01 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-98 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-15a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-08 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-09 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D2463-95 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-95(2001) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-95(2005) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-10 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-10b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM F3007-13 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
ASTM D1709-22 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D7136/D7136M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

PT-IPQ, Drop hammer impact test bench

NP 269-1962 Métaux. Essa! de choo Oharpy isur éprouvette entaillée

Japanese Industrial Standards Committee (JISC), Drop hammer impact test bench

JIS B 7722:1990 Charpy impact testing machines
JIS B 7722:1999 Charpy pendulum impact test -- Verification of testing machines
JIS R 3110:2021 Pendulum impact test method for glass in building
JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method
JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
JIS B 7739:1989 Pendulum-type impact testing machines for non-metallic materials
JIS B 7722:2018 Metallic materials -- Charpy pendulum impact test -- Verification of testing machines
JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
JIS B 7739:2011 Pendulum-type impact-testing machines for Non-Metallic Materials -- Verification of testing machines
JIS K 7111-1:2006 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS K 7111-2:2006 Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test
JIS C 0046:1993 Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer
JIS K 7124:1987 Testing method for dart impact resistance of plastic film and sheeting
JIS W 2509:1979 Tests, impact, shock absorber landing gear, aircraft
JIS B 7740:2018 Metallic materials -- Charpy pendulum impact test -- Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
JIS K 7077:1991 Testing method for charpy impact strength of carbon fiber reinforced plastics

German Institute for Standardization, Drop hammer impact test bench

DIN EN ISO 13802:2016-07 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015
DIN EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000); English version of DIN EN ISO 13802:2006-06
DIN EN ISO 179-1:2006 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005
DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999
DIN 51222:2017 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN ISO 148-2:2017-05 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016); German version EN ISO 148-2:2016
DIN EN 10045-1:1991 Charpy impact test on metallic materials; part 1: test method; german version EN 10045-1:1990
DIN EN ISO 148-1 Beiblatt 1:2014-02 Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces
DIN EN ISO 148-1:2017-05 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016); German version EN ISO 148-1:2016
DIN 51222:2016 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN 12600:2003-04 Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002
DIN EN ISO 148-3:2017-04 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN EN 12600:2003 Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002
DIN EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015); German version EN ISO 13802:2015
DIN EN 22248:1993 Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992
DIN EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008); English version of DIN EN ISO 148-2:2009-09
DIN EN ISO 14556:2023-08 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023); German version EN ISO 14556:2023
DIN EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN EN ISO 13802:2016 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015
DIN EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010
DIN EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008); English version of DIN EN ISO 148-3:2009-06
DIN ISO 7765-2:2008 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994)
DIN EN 22248:1993-02 Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992

Association Francaise de Normalisation, Drop hammer impact test bench

NF EN ISO 13802:2015 Plastiques - Vérification des machines d'essai de choc pendulaire - Essais de choc Charpy, Izod et de choc-traction
NF T51-902*NF EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
NF A03-012:1992 Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).
NF T30-017-1*NF EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter
NF T30-017-2*NF EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter
NF T51-902:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing.
NF T70-501:1995 Energetic materials for defense. Safety, vulnerability. Determination of impact sensitivity. Test with 30 kg fallhammer.
NF A03-011-2:2009 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines.
NF A03-015:2001 Steel - Charpy V-notch pendulum impact test - Instrumented test method.
NF A03-011:1990 Metallic materials. Charpy impact test. Part 1 : test method.
NF A03-011-3:2009 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
NF A03-011-1:2011 Metallic materials - Charpy pendulum impact test - Part 1 : test method.
NF A03-011-2*NF EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines
NF EN 12600:2003 Verre dans la construction - Essai au pendule - Méthode d'essai d'impact et classification du verre plat
NF E90-321-10*NF EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10 : percussive drills, hammers and breakers
NF P78-223*NF EN 12600:2003 Glass in building - Pendulum test - Impact test method and classification for flat glass.
NF A03-015*NF EN ISO 14556:2015 Metallic maerials - Charpy V-notch pendulum impact test - Instrumented test method
NF H00-042-1*NF EN 22248:1993 Packaging. Complete, filled transport packages. Vertical impact test by dropping.
NF H00-042-2:1990 Packaging. Complete, filled transport packages. Vertical toppling impact test.
NF A03-011-3*NF EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

ES-UNE, Drop hammer impact test bench

UNE-EN ISO 13802:2016 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
UNE-EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)
UNE-EN 12600:2003 ERRATUM:2011 Glass in building - Pendulum test - Impact test method and classification for flat glass.

RO-ASRO, Drop hammer impact test bench

STAS SR EN 10045-2-1994 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
STAS 7238-1980 PENDULUM IMPACT TESTING MACHIXES, FOR TESTING MATERIALS

未注明发布机构, Drop hammer impact test bench

BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals

Danish Standards Foundation, Drop hammer impact test bench

DS/EN ISO 13802:2006 Plastics – Verification of pendulum impact-testing machines – Charpy, Izod and tensile impact-testing
DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
DS/EN 12600:2003 Glass in building - Pendulum test - Impact test method for flat glass
DS/IEC 68-2-63:1993 Environmental testing. Part 2: Test methods. Test Eg: Impact, spring hammer
DS/EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
DS/ISO 2248:1986 Packaging. Complete, filled transport packages. Vertical impact test by dropping
DS/EN ISO 14556/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
DS/EN 22248:1993 Packaging. Complete, filled transport packages. Vertical impact test by dropping
DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
DS/IEC 68-2-62:1992 Environmental testing. Part 2: Test methods. Test Ef: Impact,pendulum hammer

European Committee for Standardization (CEN), Drop hammer impact test bench

prEN ISO 13802 rev Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
EN 10054-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN ISO 148-1:2010 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
EN 10045-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
EN 22248:1992 Packaging - Complete, Filled Transport Packages - Vertical Impact Test by Dropping (ISO 2248: 1985)
EN 22244:1992 Packaging - Complete, Filled Transport Packages - Horizontal Impact Tests (Horizontal or Inclined Plane Test - Pendulum Test) (ISO 2244: 1985)
EN ISO 14556:2023 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
EN ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997)
prEN ISO 148-3 rev Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
FprEN ISO 14556 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO/FDIS 14556:2023)
EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method
EN ISO 179-1:2000 Plastics - Determination of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test ISO 179-1:2000 + A1:2005; Includes amendment A1:2005

International Organization for Standardization (ISO), Drop hammer impact test bench

ISO/CD 13802 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
ISO 13802:1999 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels
ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 13802:1999/cor 1:2000 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1
ISO 148-1:2009 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 179-2:1997/cor 1:1998 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test; Technical Corrigendum 1
ISO 179-1:2000/Amd 1:2005 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test; Amendment 1
ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
ISO 14556:2023 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 2248:1972 Title missing - Legacy paper document
ISO 2248:1985 Packaging; Complete, filled transport packages; Vertical impact test by dropping
ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 2244-1:1972 Packaging — Complete, filled transport packages — Part 1: Horizontal impact tests (Inclined plane test, pendulum test)
ISO 7765-2:1994 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test
ISO 2248-1:1972 Packaging — Complete, filled transport packages — Part 1: Vertical impact test by dropping

BE-NBN, Drop hammer impact test bench

NBN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
NBN-EN 10045-1-1992 Metallic materials - Charpy impact test - Part 1: Test method

国家市场监督管理总局、中国国家标准化管理委员会, Drop hammer impact test bench

GB/T 3808-2018 Verification of pendulum-type impact testing machines
GB/T 39814-2021 Test method for impact strength of ultrathin glass—Ball drop method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 19748-2019 Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Drop hammer impact test bench

GJB 5403.2-2005 Test method of launch safety of explosive charge Part 2: Drop hammer impact test
GJB 5383.2-2005 Test methods of sensitivity and stability for pyrotechnic Part 2: Test for impact sensitivity falling weight method

VN-TCVN, Drop hammer impact test bench

TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter
TCVN 4871-1989 Packaging and transport packages.Vertical impact tests by dropping

RU-GOST R, Drop hammer impact test bench

GOST 33496-2015 Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST 25387-1982 Complete, filled transport packages. Rolling and topping tests
GOST R ISO 148-1-2013 Metallic materials. Charpy pendulum impact test. Part 1.Test method
GOST 18425-1973 Complete, filled transport packages. Vertical impact test by dropping
GOST 32564.2-2013 Glass and glass products. Test method for resistance to impact of hammer and axe
GOST R 53655.2-2009 Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 2. Instrumented puncture test

SE-SIS, Drop hammer impact test bench

SIS 11 23 50 E-1974 Slagprovning med U-provstav i Charpy-hejare
SIS 11 03 21-1966 Calibration of pendulum impact testing machines Charpy
SIS 11 03 20-1966 Calibration of pendulum impact testing machines Charpy
SIS SS-EN 10 045-1-1990 Metallic materials — Charpy impact test — Part 1: Test method
SIS 11 03 21 E-1974 Kontroll av Charpy-hejare. Verifiering med kontrollstavar

American National Standards Institute （ANSI), Drop hammer impact test bench

ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ANSI/ASTM D5420:1998 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ANSI/ASTM D2463:1995 Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers (08.02)
ANSI/ASTM D5628:2001 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Weight) (08.03)

KR-KS, Drop hammer impact test bench

KS M ISO 13802-2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 6272-2-2013(2023) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2023) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter

Lithuanian Standards Office , Drop hammer impact test bench

LST EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000)
LST EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
LST EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
LST EN 12600-2003 Glass in building - Pendulum test - Impact test method and classification for flat glass
LST EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000)
LST EN ISO 14556:2000/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces (ISO 14556:2000/Amd 1:2006)
LST EN 22248-2001 Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985)
LST EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008)

CEN - European Committee for Standardization, Drop hammer impact test bench

EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy@ Izod and tensile impact-testing
EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter
EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills@ hammers and breakers
EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines

GOSTR, Drop hammer impact test bench

GOST 34373-2017 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
GOST 18425-2018 Complete, filled transport packages. Vertical impact test by dropping

Professional Standard - Railway, Drop hammer impact test bench

TB/T 1961-1987 Vehicle buffer performance and drop weight test method

NL-NEN, Drop hammer impact test bench

NEN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)

AT-ON, Drop hammer impact test bench

ONORM EN 10045-2-1993 Metalhc matenals - Charpy impact test - Part 2: Verif ication of the testing machine (pendulum impact)
ONORM ISO 2248:1988 Packaging; complete, filled transport packages; vertical impact fest by dropping
ONORM EN 22244-1993 Packaging - Complete, filled transport packages -Horizontal impact tests (horizontal or inclined plane test - Pendulum test) (ISO 2244:1985)

IN-BIS, Drop hammer impact test bench

CZ-CSN, Drop hammer impact test bench

CSN 26 9313-1986 Plastic crates. Vertical impact test by dropping
CSN 77 0210-1967 Impact resistance tests of foils by the free falling-DART method
CSN 77 0631-1978 Transport packages and complete, filled transport packages. Vertical impact test by dropping

国家质量监督检验检疫总局, Drop hammer impact test bench

SN/T 4955-2017 Test method for non-marking of shoe soles - pendulum impact method

未注明发布机构, Drop hammer impact test bench

BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals

Professional Standard - Aviation, Drop hammer impact test bench

HB 8619-2021 Test method for drop weight impact damage resistance of aerospace polymer matrix composite laminates
HB 7067-1994 Drop weight impact test method for transparent plastic panels

Malaysia Standards, Drop hammer impact test bench

MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)
MS 133 Pt.E7-2000 Methods of test for paints and varnishes:Part E7:Resistance to impact (Falling ball test) (First revision)

Professional Standard - Aerospace, Drop hammer impact test bench

QJ 3039-1998 Test method for drop weight impact sensitivity of composite solid propellants

AENOR, Drop hammer impact test bench

UNE-EN ISO 6272-2:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
UNE-EN ISO 6272-1:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
UNE-EN 12600:2003 Glass in building - Pendulum test - Impact test method and classification for flat glass.
UNE-EN ISO 148-1:2017 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
UNE-EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
UNE-EN 22248:1994 PACKAGING. COMPLETE, FILLED TRANSPORT PACKAGES. VERTICAL IMPACT TEST B DROPPING. (ISO 2248:1985).

International Electrotechnical Commission (IEC), Drop hammer impact test bench

IEC 60068-2-62:1991 Environmental testing; part 2: test methods; test Ef: impact, pendulum hammer
IEC 60068-2-63:1991 Environmental testing; part 2: test methods; test Eg: impact, spring hammer

Society of Automotive Engineers (SAE), Drop hammer impact test bench

SAE AS6053A-2012 Tests, Impact, Shock Absorber Landing Gear, Aircraft

ZA-SANS, Drop hammer impact test bench

SANS 148-1:2007 Metallic materials - Charpy pendulum impact test Part 1: Test method

GM North America, Drop hammer impact test bench

GM GMN10041-2003 Kapuskasing Drop Impact Test for Finished Leather

Canadian General Standards Board （CGSB), Drop hammer impact test bench

CGSB 1-GP-71 METH 147.2-1978 Methodes D'Essai Des Peintures Et Pigments Resistance Aux Chocs Methode De La Bille Tombante

Group Standards of the People's Republic of China, Drop hammer impact test bench

T/CPF 0056-2023 Test method for fusion of polystyrene foam— Falling cone impact method

YU-JUS, Drop hammer impact test bench

JUS Z.M8.015-1984 Packaging. Complete, filled transport packages. Horizonta! impact test (inclined plane test, pendulum test)
JUS Z.M8.014-1984 Packaging. Complete, filled transport packages. Vertical impact test by free fali

Aerospace, Security and Defence Industries Association of Europe (ASD), Drop hammer impact test bench

ASD-STAN PREN 2003-3-1998 Aerospace Series Steel Test Methods Part 3: Calibration of Pendulum Impact Machines (Edition P 1)

国家铁路局, Drop hammer impact test bench

TB/T 3449-2016 Rockfall impact test method and evaluation of flexible passive protection products for railway slopes