ZH
RU
ES

LDPE Standard Infrared

LDPE Standard Infrared, Total:152 items.

In the international standard classification, LDPE Standard Infrared involves: Plastics, Rubber and plastics products, Electrical accessories, Small craft, Pipeline components and pipelines, Lubrication systems, Water quality, Raw materials for rubber and plastics, Packaging materials and accessories, Insulating fluids, Insulating materials, Non-destructive testing, Installations in buildings, Aerospace fluid systems and components, Organic chemicals, Medical equipment, Wastes.

American Society for Testing and Materials (ASTM), LDPE Standard Infrared

ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D4635-08 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-01 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-95 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-08a Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM F2160-01 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2160-05 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM F2619/F2619M-19 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2619/F2619M-20 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2649-08 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM F2619/F2619M-13 Standard Specification for High-Density Polyethylene 40;PE41; Line Pipe
ASTM F2649-14(2023) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3981-95 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-08 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D831-94(1999)e1 Standard Test Method for Gas Content of Cable and Capacitor Oils
ASTM D8318-20 Standard Specification for Low-Density Poly (Vinylidene Fluoride) Based Material Intended for Use in Wire and Cable Jacketing
ASTM F2160-10 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2160-16 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM F1759-97 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F2649-14(2019) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM D3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM F2160-08 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2160-22 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2160-22a Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F3202-19 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
ASTM F3202-19a Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
ASTM F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D3485-15 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D3900-15 Standard Test Methods for Rubber&x2014;Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D5017-96(2003)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D5017-96 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D5017-96(2009)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM F2737-10 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F2737-10a Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D2839-10 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D2839-16 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D3900-17 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-17(2021) Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM F2737-11(2021) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F2649-14 Standard Specification for Corrugated High Density Polyethylene &40;HDPE&41; Grease Interceptor Tanks
ASTM F2737-11(2017) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
ASTM D5594-98(2012) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5594-18 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5594-18a Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5017-17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D3485-22 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM D2839-16(2023) Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D2839-05 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM F1759-97(2018) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F2487-13(2017) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM D5815-95(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC)
ASTM D5594-98 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D2839-96 Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D2839-02 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM F3034-15(2020) Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM F3034-13 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM F2487-13 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM F2487-21 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM F2102-17 Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F3034-15 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM D5524-94(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography
ASTM F2102-13 Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM D7066-04(2017) Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM D5524-94 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography
ASTM D1996-97 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
ASTM F2487-06 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
ASTM F3034-14 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene &40;HDPE&41;
ASTM F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM F2487-06(2012) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
ASTM D7066-04 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM F2102-06e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2102-06 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2102-01 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2102-01e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM D5815-95 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC)

GM North America, LDPE Standard Infrared

GM GMP.PE.063-1991 Polyethylene - Low Density, Homopolymer, Inj. Molded, UV Stable
GM GMP.PE.012-1997 Polyethylene - Low Density, UV Stabilized, Blow Molding Grade (Revision B)

(U.S.) Ford Automotive Standards, LDPE Standard Infrared

FORD WSL-M98D29-A-2010 COMPOSITE, FUEL TANK HIGH DENSITY POLYETHYLENE (PE-HD), LINEAR LOW DENSITY POLYETHYLENE (PE-LLD) TIE LAYERS, ETHYLENE VINYL ALCOHOL (E/VAL) BARRIER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M99D52-A-2008 POLYETHYLENE FILM, LOW DENSITY - STRETCH***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M3G102-A-2005 TAPE, LOW DENSITY POLYVINYL CHLORIDE FOAM PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D311-A-2008 POLYETHYLENE, HIGH DENSITY - EXTRUSION GRADE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SL-M4D9575-B-2008 POLYETHYLENE, HIGH DENSITY, LOW MFI ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G102-B-2007 TAPE, LOW DENSITY POLYVINYL CHLORIDE FOAM PRESSURE SENSITIVE, SUPERSOFT ***TO BE UESD WITH FORD WSS-M99P1111-A***
FORD WSB-M4D880-A-2006 POLYETHYLENE (PE), LINEAR LOW DENSITY MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D233-C-2007 POLYVINYL CHLORIDE COPOLYMER FOAM, HIGH DENSITY ***TO BE USED WITH FORD M99P1111-A***
FORD ESB-M4D233-C-2009 POLYVINYL CHLORIDE COPOLYMER FOAM - HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D383-A2-2006 POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H104-A5-2008 CARPET, POLYPROPYLENE, DILOUR, NEEDLED, - LATEX BACKCOATED, LDPE EXTRUSION BACKED - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D800-A-2010 POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D645-A-2009 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D815-A1-2006 POLYPROPYLENE (PP) FOAM, CLOSED CELL, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSG-M1C218-B2-2010 GREASE, PTFE, LIGHT CONSISTENCY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSG-M4D901-A1-2010 POLYETHYLENE, HIGH DENSITY (PE-HD) BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G102-B2-2007 TAPE, LOW DENSITY POLYVINYL CHLORIDE/NITRILE FOAM, PRESSURE SENSITIVE, ULTRA SOFT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M1L123-A-2003 CABLE, LOW TENSION, POLYETHYLENE INSULATED, REDUCED WALL THICKNESS, BARE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESL-M4D197-A2-2008 POLYETHYLENE, HIGH DENSITY BLOW MOLDING COMPOUND, GASOLINE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4G252-E2-2009 SEALER, VINYL, LOW DENSITY, EXTRUDABLE, SPRAYABLE ABRASION RESISTANT, NON-PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D871-A5-2006 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A***
FORD ESB-M1L123-A2-2003 CABLE, LOW TENSION, POLYETHYLENE INSULATED, REDUCED WALL THICKNESS, TINNED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M1L123-A
FORD WSS-M2D505-A2-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 60 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A3-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 70 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A4-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 75 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A5-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 90 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4G265-B-2003 SEALER, PVC, SOLVENT FREE, AIRLESS SPRAYABLE LOW TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WRS-M3H155-A1-2015 CARPET, POLYESTER, NON WOVEN, DILOUR, LATEX AND LOW DENSITY POLYETHYLENE BACKED, MOLDABLE 350 G/M2 (10.0 OZ) NOMINAL FACE ***TO BE USED WITH FORD WSS-M99P1111-A***

Liaoning Provincial Standard of the People's Republic of China, LDPE Standard Infrared

DB21/T 3090-2018 Standards for construction of high-density polyethylene fishing vessels

AENOR, LDPE Standard Infrared

UNE 53331:1997 IN PLASTICS. UNPLASTIZED POLY(VINYL CHLORIDE) AND HIGH AND MEDIUM DENSITY POLYETHYLENE (PE) PIPES. CRITERION FOR THE ASSESSMENT OF PIPES FOR PLASTICS PIPING SYSTEMS WITH CAR WITHOUT PRESSURE UNDER EXTERNAL LOADS.

American National Standards Institute （ANSI), LDPE Standard Infrared

ANSI/UL 651A-2011 Standard for Safety for Type EB and A Rigid PVC Conduit and HDPE Conduit
ANSI/UL 651Aa-2011 Standard for Safety for Type EB and A Rigid PVC Conduit and HDPE Conduit

Group Standards of the People's Republic of China, LDPE Standard Infrared

T/GDC 25-2019 Throttling standard parts connected to high-density polyethylene (HDPE) winding reinforced pipe

Society of Automotive Engineers (SAE), LDPE Standard Infrared

SAE MA2172-1990 Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 ℃, 21,000 kPa, Lightweight Beam Seal, Straight to 90 Degrees, Metric FSC 4720

Professional Standard - Medicine, LDPE Standard Infrared

YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy

AT-ON, LDPE Standard Infrared

ONORM B 5170-2001 Low density polyethylene pipes(PE 40) for water pipelines - Dimensions, requirements, tests, marking of conformity

German Institute for Standardization, LDPE Standard Infrared

DIN 53383-2:1983 Testing of plastics; testing of oxidation stability by means of ageing in an oven; polyethylene of high density (PE-HD), infra red spectroscopic (IR) determination of the carbonyle content

Association Francaise de Normalisation, LDPE Standard Infrared

NF E29-480:1994 Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.

Standard Association of Australia （SAA）, LDPE Standard Infrared

RUL PL.33-2002 Rulings to plumbing and piping systems Standards - Encasing high-density polyethylene (HDPE) in concrete (Ruling to AS/NZS 3500.2.2:1996)