ZH

RU

ES

architectural coating voc

architectural coating voc, Total:500 items.

In the international standard classification, architectural coating voc involves: Paints and varnishes, Products of the chemical industry, Paint ingredients, Production in the chemical industry, Paint coating processes, Interior finishing, Construction materials, Rubber and plastics products, Protection of and in buildings, Protection against fire, Ceramics, Surface treatment and coating, Iron and steel products, Paint coating equipment, Construction industry, Construction equipment, Construction of waterways and ports, Air quality, Environmental protection, Test conditions and procedures in general, Construction technology, Products of the textile industry, Analytical chemistry, Elements of buildings, Energy and heat transfer engineering in general, GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION, Occupational safety. Industrial hygiene, Domestic safety, Non-ferrous metals, Equipment for entertainment, Buildings, Hydraulic construction, Cellular materials, Corrosion of metals, Structures of buildings, Materials for the reinforcement of composites, Road vehicle systems, Farm buildings, structures and installations, Wood-based panels, Plastics, Installations in buildings, Vocabularies, Inks. Printing inks, Refractories, Wastes, Measurement of volume, mass, density, viscosity, Products of non-ferrous metals, Quantities and units, Heat recovery. Thermal insulation.


ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., architectural coating voc

  • ASHRAE AT-01-13-2001 Modeling and Measurement of VOC Emissions from Building Materials
  • ASHRAE KC-03-11-4-2003 A New Mass Transfer Based Model of VOC Emissions from Building Materials
  • ASHRAE 4356-2000 Measurements of VOC Adsorption/Desorption Characteristics of Typical Interior Building Materials (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 5@ Number
  • ASHRAE 4508-2002 A Critical Review on Studies of Volatile Organic Compound (VOC) Corption by Building Materials (RP-1097)
  • ASHRAE 4578-2002 Effects of Environmental Conditions on the VOC Sorption by Building Materials - Part I: Experimental Results (RP-1097)
  • ASHRAE 4616-2003 Effects of Environmental Conditions on the Sorption of VOCs on Building Materials - Part II: Model Evaluation (RP-1097)

Group Standards of the People's Republic of China, architectural coating voc

  • T/ZZB 0293-2017 Coil coatings for architectures
  • T/SDTL 01-2020 Impasto art paint for construction
  • T/HSSX 0002-2022 Impasto art paint for construction
  • T/HSSX 0003-2022 Thin coat type art paint for construction
  • T/SDTL 02-2020 Thin coat type art paint for construction
  • T/SDTL 04-2022 Architectural Inorganic Interior Coatings
  • T/GDJSKB 007-2022 Sound insulation coating for building floor
  • T/SHHJ 000015-2021 Elastomeric wall coatings
  • T/SHHJ 000015-2023 Elastomeric wall coatings
  • T/CSTM 00632.3-2022 Technical requirement for coatings used in architectural finishing engineering—Part 3: Inorganic architectural coatings system
  • T/SDTL 09-2022 Thick-coated Art Coating Argentite for Architecture
  • T/ZS 0199-2021 Technical standard for architectural coatings
  • T/CBMF 62-2019 Sepiolite for architectural coating materials
  • T/QGCML 821-2023 Real stone paint architectural coating
  • T/CSRE 15001-2022 Rare earth thermal insulation coatings for building glass
  • T/ZZB 2809-2022 Textured solar heat reflective thermal insulation coatings for buildings
  • T/ZZB 0155-2016 Waterborne multicolor architectural coatings for exterior wall
  • T/LJH 017-2019 Purple sand dry powder interior wall coatings for construction
  • T/SSLX 0002-2019 Special Powder Coatings for Spraying Aluminum Mold Frame in High-end Buildings
  • T/SHHJ 000017-2021 Waterborne multicolor architectural coatings
  • T/SHHJ 000017-2023 Waterborne multicolor architectural coatings
  • T/SHHJ 000030-2021 Technical specification of application for exterior wall coating
  • T/QGCML 820-2023 Liquid inorganic coatings for building interior and exterior walls
  • T/CBMF 190-2022 Silicone elastic architectural coating
  • T/ZZB 2723-2022 Radiation heat insulation coating for building exterior wall
  • T/FSS 47-2022 Foshan Standard Artistic coatings for interior wall
  • T/CADBM 32-2021 Water-based colorful stone-like paint for building exterior walls
  • T/FSS 46-2022 Foshan Standard Building Exterior Wall Imitation Stone Paint
  • T/GDTL 018-2023 Technical specification for building sound insulation coating
  • T/SDTL 05-2021 Determination of scrub resistance (roller brush) of artistic paint coatings for architectural use
  • T/ZZB 1091-2019 Photo-catalytic self-cleaning coatings for building exteriors
  • T/GDTL 016-2022 Cement mortar block for testing of architectural coatings performance
  • T/CECS 750-2020 Technical specification for the application of architectural reflective and thermal insulation coatings
  • T/CASME 531-2023 Aerogel coating for building exterior wall insulation
  • T/CECS 10296-2023 Construction Robot Floor Coating Application Robot
  • T/QGCML 1848-2023 Waterproof paint application device for building waterproofing projects
  • T/CSTM 00632.2-2022 Technical requirement for coatings used in architectural finishing engineering—Part 2: Exterior wall coatings system
  • T/CSTM 00632.1-2022 Technical requirement for coatings used in architectural finishing engineering—Part 1: Interior wall coatings system
  • T/CSTM 00632.4-2022 Technical requirement for coatings used in architectural finishing engineering—Part 4: Floor coatings system
  • T/SHHJ 000038-2022 Technical requirements for green low-carbon building materials Architectural coatings
  • T/SCDA 018-2018 PTS Waterproof Coating System Building Construction
  • T/FWHX 002-2021 Polymer Emulsion Architectural Waterproof Coatings
  • T/SHHJ 000032-2021 Technical specification for application of anti-corrosive coatings on building steel structures
  • T/CBMF 85-2020 Limit of harmful substances of building waterproof coatings
  • T/GDTL 012-2021 Self-cleaning coatings for surface of construction steel structure
  • T/CSCP 0013-2017 Atmospheric Environment Corrosion Test of Architectural Coatings
  • T/ZS 0247-2021 Technical specification for external wall granite like coatings
  • T/ZZB 2269-2021 Sand textured building coating based on synthetic resin emulsion for exterior wall
  • T/CBMCA 016-2020 Technical specification for interior inorganic architectural coating material
  • T/FCEAS 003-2020 Technical specification for the application of colorful reflective heat-insulating architectural coatings
  • T/SDTL 03-2021 Limits of harmful substances in water-based art paints for construction
  • T/CASME 110-2022 Coated fabrics for building shading
  • T/ZZXJX 064-2021 Water-based architectural coatings finishing engineering construction and acceptance regulations
  • T/SCS 1-2022 Green product—Building floor sound insulation coating
  • T/SHHJ 000016-2021 Sand textured building coating based on synthetic resin emulsion
  • T/CNCIA 01004-2017 Waterborne graphene electromagnetic shielding coating for architecture
  • T/SHHJ 000016-2023 Sand textured building coating based on synthetic resin emulsion
  • T/GDTL 017-2022 Non-asbetos fiber cement flat sheets for testing of architectural coatings performance
  • T/GSTX 001-2020 Technical specification for the application of synthetic resin emulsion architectural exterior wall coatings
  • T/NBTL 010-2019 Sand-in-Water Colorful Architectural Coatings and Construction Specifications
  • T/ZS 0234-2021 Technical standard for the application of photo-catalytic self-cleaning coatings for building exteriors
  • T/CWEA 16-2021 Specification for epoxy resin coatings of hydraulic structures
  • T/SCDA 053-2021 EPIC1 Application Technical Standards for Composite Airgel Thermal Insulation Coating System for Buildings
  • T/SCDA 053-2023 EPIC1 technical standards for the application of composite airgel thermal insulation coating systems for buildings
  • T/ZZB 1802-2020 Prepainted steel sheet and strip for building
  • T/SCDA 132-2023 Application technical standard of HB building airgel thermal insulation coating system
  • T/CECS 807-2021 Technical specification for the application of fire retardant coatings and fire retardant treatment agents for building wood structures
  • T/CPCIF 0001-2017 Technical specification for green-design Product assessment water-borne architectural coating materials
  • T/SCDA 082-2021 Dayan self-repair F-100 waterproof coating system building structure
  • T/ZZB 1135-2019 Stone-grain-pattern coated aluminium panels and strips for building decoration
  • T/HBTL 005-2022 Content limits of volatile organic compounds in architectural coatings
  • T/CNCIA 02001-2017 Green Design Product Evaluation Technical Specification Water-based Architectural Coatings
  • T/FJBS 5-2022 Tea Saponin for Building Materials
  • T/CBMF 94-2020 Coated Al-Mg-Si aluminum alloy plate for building envelope
  • T/SHCDA 000001-2020 Attribute identification and management for solid wastes of water-based architectural coatings
  • T/CSTM 00438-2022 Bedding mortar material for prefabricated building
  • T/LLX 0004-2022 Non-architectural aluminum alloy decorative profile powder sprayed material
  • T/CBCSA 17-2019 Pressing and formation powder for building ceramics
  • T/CIC 408-2023 Copper stag used in building ceramice
  • T/CSTE 0248-2022 Technical requirements of fly ash for building materials
  • T/CISA 181-2021 Quality grading method of prepainted steel sheet and strip for building

Taiwan Provincial Standard of the People's Republic of China, architectural coating voc

  • CNS 11728-2000 Fire-retardant paints for buildings
  • CNS 8645-1988 Method of Test for Waterproofing of Buildings
  • CNS 8903-1982 Sealing Compounds for Ssaling and Glazing in Buildings
  • CNS 15080-2007 Maximum volatile organic compound content limit value for architectural coatings
  • CNS 13812-2003 Rolled steels for building structure
  • CNS 8901-1982 Oil Based Caulking Compounds for Building
  • CNS 8904-1982 Method of Test for Sealing Compounds for Sealing and Glazing in Buildings
  • CNS 13133-1993 Glossary of Terms Used in Building Sealant for Joint
  • CNS 8902-1982 Method of Test for Oil Based Caulking Compounds for Building

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, architectural coating voc

  • GB/T 20623-2006 Emulsions for architectural coatings
  • GB/T 25261-2018 Solar heat reflecting insulation coatings for buildings
  • GB/T 25261-2010 Solar heat reflecting insulation coating for buildings
  • GB/T 35466-2017 Determination of the emission of volatile organic compounds form wood-plastic composite for construction
  • GB/T 9779-2015 Multi-layer coatings for architecture
  • GB/T 9779-2005 Multi-layer coatings for architecture
  • GB/T 9779-1988 Multi wall architectural coatings
  • GB/T 31815-2015 Self-cleaning coatings for building exteriors
  • GB/T 9265-1988 Determination for alkali resistance of film of architectural paints and coatings
  • GB/T 9265-2009 Determination for alkali resistance of film of architectural paints and coatings
  • GB/T 9266-1988 Determination of scrub resistance of film of architectural paints and coatings
  • GB/T 9266-2009 Determination of scrub resistance of film of architectural paints and coatings
  • GB/T 16777-1997 Test methods for building waterproof coatings
  • GB/T 16777-2008 Test methods for building waterproofing coatings
  • GB 24408-2009 Limit of harmful substances of exterior wall coatings
  • GB/T 9780-1988 Test method for dirt resistance of film of architectural coatings and paint
  • GB/T 9780-2005 Test method for dirt pickup resistance of film of architectural coatings and paints
  • GB/T 9780-2013 Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint
  • GB/T 21088-2007 Classification and definition of the waterborne additives for architectural coatings
  • GB/T 28886-2012 Plastic door for buildings
  • GB/T 28887-2012 Plastic window for buildings
  • GB/T 29499-2013 Synthetic resin curtain-wall-imitation coating on architectural
  • GB 30981-2014 Limit of harmful substances of anticorrosion coatings for construction steel structure
  • GB/T 9269-1988 Determination of viscosity of architectural paints and coatings--Stormer viscosimeter method
  • GB/T 29499-2013(英文版) Curtainwallimitation synthetic resin coating for buildings
  • GB/T 31415-2015 Paints and varnishes.Performance requirements for protective paint systems for offshore and related structures
  • GB/T 26742-2011 The row materials for architectural and sanitary ceramics.Clay

BR-ABNT, architectural coating voc

IX-SA, architectural coating voc

Association Francaise de Normalisation, architectural coating voc

  • NF T30-804:1981 Building paints. Specifications of microporous cladding paints.
  • NF T30-803:1979 Exterior building paints. Determination of the alkali resistance of microporous cladding paints.
  • FD T30-807:2015 Paints and varnishes - Paints for building - Data sheet of coating material
  • NF T30-801:1979 Exterior building paints. Conventional determination of the water permeability of microporous cladding paints.
  • NF T30-802:1979 Exterior building paints. Conventional determination of the water permeability of microporous cladding paints.
  • NF T34-722:2016 Paints and vanishes - Coating material and coating systems for exterior masonry and concrete - Fa?ade coatings classification
  • NF T34-750-1*NF EN 12206-1:2021 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from thermosetting coating powder
  • NF G37-141:2008 Rubber or plastics coated fabrics - Safety of temporary structures (tents)- Specification for coated fabrics intended for tents and related structures.
  • NF P74-201-2:1994 DTU 59.1 - Painting - Private market - Building painting works - Part 2 : particular specifications book.
  • NF T34-721-1:1996 PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE. PART 1 : CLASSIFICATION. (EUROPEAN STANDARD EN 1062-1).
  • NF EN 12206-1:2021 Peintures et vernis - Revêtement de l'aluminium et de ses alliages pour des applications architecturales - Partie 1 : revêtements à partir de peinture en poudre thermodurcissable
  • NF T34-750-1:2011 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from coating powder.
  • NF T34-602:2009 Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures.
  • NF X46-035:2021 Lead survey - Detection of lead prior to works in coatings and construction materials and products
  • NF P74-201-1-2:2013 Building works - Thin, semi-thick, thick paint coatings - Part 1-2 : general criteria for choice of materials
  • NF EN 13279-2:2014 Liants-plâtres et enduits à base de plâtre pour le bâtiment - Partie 2 : méthodes d'essai
  • NF EN 13279-1:2008 Liants-plâtres et enduits à base de plâtre pour le bâtiment - Partie 1 : définitions et exigences
  • NF DTU 27.2 P2:2020 Travaux de bâtiment - Réalisation de revêtements par projection de produits pâteux - Partie 2 : cahier des clauses administratives spéciales types
  • NF EN 13438:2013 Peintures et vernis - Revêtements de poudre organique pour produits en acier galvanisé ou sherardisé utilisés dans la construction
  • NF DTU 27.2 P1-2:2020 Travaux de bâtiment - Réalisation de revêtements par projection de produits pâteux - Partie 1-2 : critères généraux de choix des matériaux
  • NF T30-800:1979 Exterior building paints. Preparation of test panels of steel-cement-silica.
  • NF DTU 27.2 P1-1:2020 Travaux de bâtiment - Réalisation de revêtements par projection de produits pâteux - Partie 1-1 : cahier des clauses techniques types
  • NF DTU 25.1 P1-2:2010 Travaux de bâtiment - Enduits intérieurs en plâtre - Partie 1-2 : critères généraux de choix des matériaux (CGM)
  • NF DTU 42.1 P2:2007 Travaux de bâtiment - Réfection de façades en service par revêtements d'imperméabilité à base de polymères - Partie 2 : cahier des clauses spéciales
  • NF A92-121:2005 Vitreous and porcelain enamels - Characteristics of enamel coatings to steel panels intended for architecture.
  • NF DTU 59.3 P1-2:2023 Travaux de bâtiment - Peinture de sols - Partie 1-2 : critères généraux de choix des matériaux
  • NF DTU 25.1 P2:2010 Travaux de bâtiment - Enduits intérieurs en plâtre - Partie 2 : cahier des clauses administratives spéciales types
  • NF DTU 25.1 P1-1:2010 Travaux de bâtiment - Enduits intérieurs en plâtre - Partie 1-1 : cahier des clauses techniques types (CCT)

Professional Standard - Chemical Industry, architectural coating voc

  • HG/T 4104-2009 Water based fluororesin coatings used in architecture
  • HG/T 4842-2015 Elastomeric emulsions for archiectural coatings
  • HG/T 3951-2007 Water based colorants for architectural coatings
  • HG/T 4343-2012 Waterborne multicolor architectural coatings
  • HG/T 4567-2013 Elastomeric middle coatings for architecture
  • HG/T 5065~5069-2016 Clear varnishes for architectural coatings, dispersants for water-based coatings, water-based alkyd resins for coatings, iron phosphorus powder antirust pigments and transparent iron oxide pigments for coatings (2016)
  • HG/T 20720-2020 Code for construction and acceptance of water-based anti-corrosion coatings for industrial building steel structures

Japanese Industrial Standards Committee (JISC), architectural coating voc

  • JIS K 5661:1970 Fire-retardant paints for buildings
  • JIS K 5658:1992 Fluoro resin paint for architecture
  • JIS K 5658:2002 Fluoro resin paint for architecture
  • JIS K 5657:1992 Polyurethane resin paint for steel structures
  • JIS K 5656:2002 Polyurethane resin paint for architecture
  • JIS A 6909:2021 Coating materials for textured finishes of buildings
  • JIS A 6909:2003 Coating materials for textured finishes of buildings
  • JIS A 6909:2014 Coating materials for textured finishes of buildings
  • JIS A 6909:2000 Coating materials for textured finishes of buildings
  • JIS K 5658:2010 Long durable top coats for constructions
  • JIS A 6909 AMD 1:2006 Coating materials for textured finishes of buildings (Amendment 1)
  • JIS A 6909 AMD 2:2010 Coating materials for textured finishes of buildings (Amendment 2)
  • JIS A 1903:2008 Determination of the emission of volatile organic compounds (VOC) for building products -- Passive method
  • JIS A 1903:2015 Determination of the emission of volatile organic compounds (VOC) by building products -- Passive method
  • JIS A 6021:2022 Liquid-applied compounds for waterproofing membrane coating of buildings
  • JIS A 5801:1975 Fire-retardant woods for buildings
  • JIS A 5751:1995 Oil based caulking compounds for buildings
  • JIS A 1911:2006 Determination of the emission of formaldehyde for building materials and building related products -- Large chamber method
  • JIS A 1911:2015 Determination of the emission of formaldehyde by building materials and building related products -- Large chamber method
  • JIS A 6021:2000 Liquid-applied compounds for waterproofing membrane coating of buildings
  • JIS A 6021:2011 Liquid-applied compounds for waterproofing membrane coating of buildings
  • JIS A 8971:2008 Scaffolding for roof construction and installation

RU-GOST R, architectural coating voc

  • GOST 33290-2015 Paint materials used in building. General specifications
  • GOST R 52491-2005 Coating materials, used in building. General specifications
  • GOST 30246-2016 Continuously rolled shett steel with paint coating for building. Specifications
  • GOST R 56460-2015 Building structures. Method of fire hazard testing for external coating
  • GOST 4.224-1983 Quality ratings system. Building. Sealants and caulking materials and products. Nomenclature of characteristics
  • GOST 16349-1985 Cycling mixers for building materials. Specifications
  • GOST 31705-2011 Sound absorbing materials used in buildings. Assessment of sound absorption

Professional Standard - Construction Industry, architectural coating voc

  • JG/T 304-2011 Anti-graffiti and/or stickresist coatings for buildings
  • JG/T 338-2011 Thermal insulation coatings for building glass
  • JG/T 172-2014 Elastomeric wall coatings
  • JG/T 172-2005 Elastomeric wall coatings
  • JG/T 446-2014 Architectural phosphorescent coating
  • JG/T 224-2007 Anticorrosive coatings for building steel structure
  • JG/T 23-2001 The preparation of plate specimens for testing of bulding paints and coatings
  • JG/T 445-2014 Architectural inorganic powder coatings
  • JG/T 444-2014 Architectural inorganic brick imitating coatings
  • JG/T 26-2002 Inorganic building coating for external wall
  • JG/T 235-2008 Architectural reflective thermal insulation coatings
  • JG/T 235-2014 Architectural reflective thermal insulation coating
  • JGJ/T 359-2015 Technical specification for application of architectural reflective thermal insulation coating
  • JG/T 25-2017 Test method for temperature change resistance of architectural coatings
  • JG/T 25-1999 Determination for freeze-thaw resistance of film of building coatings
  • JG/T 24-2018 Sand textured building coating based on synthetic resin emulsion
  • JG/T 24-2000 Sand textured building coating based on synthetic resin emulsion
  • JGJ/T 287-2014 Standard for energy efficiency test of solar heat reflecting insulation coatings of buildings
  • JG/T 133-2000 Fluorocarbon coatings on architectural aluminum extrusions and panels
  • JG/T 395-2012 Membrane products for building
  • JG/T 415-2013 Limit and test method of harmful substances in fire-retardant coating
  • JG/T 5011.12-1992 Construction machinery and equipment.General specification for paints
  • JG/T 174-2005 Thermal barrier strip for construction industry

British Standards Institution (BSI), architectural coating voc

  • BS 6150:2019 Code of practice for painting of buildings
  • BS 6150:1991 Code of practice for painting of buildings
  • BS 4800:2011 Schedule of paint colours for building purposes
  • BS 4800:1989 Schedule of paint colours for building purposes
  • BS 6150:2006 Painting of buildings - Code of practice
  • BS 6150:2006+A1:2014 Painting of buildings.Code of practice
  • BS EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder
  • BS EN 12206-1:2021 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from thermosetting coating powder
  • BS EN 13438:2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes
  • BS EN 13438:2006 Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes
  • BS EN 1062-1:2004 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Classification
  • BS EN 15619:2008+A1:2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
  • BS EN 15619:2008 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
  • BS EN 13438:2013 Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
  • 19/30393860 DC BS EN 12206-1. Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Part 1. Coatings prepared from thermosetting coating powder
  • BS 5502-21:1990 Buildings and structures for agriculture - Code of practice for selection and use of construction materials
  • BS 8216:1991 Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
  • BS 4901:1976 Specification for plastics colours for building purposes
  • BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Products for building interior applications
  • BS EN 10169-2:2006 Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
  • BS 5502-75:1993 Buildings and structures for agriculture. Code of practice for the design and construction of forage stores
  • BS 8202-1:1995 Coatings for fire protection of building elements - Code of practice for the selection and installation of sprayed mineral coatings
  • BS EN 14431:2004 Vitreous and porcelain enamels-Characteristics of the enamel coatings applied to steel panels intended for architecture
  • BS EN 14431:2005 Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
  • BS EN ISO 14713-2:2010 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Hot dip galvanizing
  • BS EN ISO 14713-2:2020 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Hot dip galvanizing
  • BS EN ISO 14713-2:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Hot dip galvanizing

Henan Provincial Standard of the People's Republic of China, architectural coating voc

工业和信息化部, architectural coating voc

  • HG/T 5065-2016 Varnish for architectural coatings
  • YS/T 680-2016 Powder coating for aluminum alloy building profiles
  • JC/T 1040-2020 Heat reflective insulation coating for building exterior surfaces
  • YS/T 728-2016 Acrylic electrophoretic coating for aluminum alloy building profiles
  • JC/T 2599-2021 Volatile organic compound (voc) release test method for resilient flooring used in building decoration
  • YB/T 4456-2022 Color coated steel sheets and strips for construction
  • JC/T 2607-2021 Pre-roller coated metal sheets for building roofing
  • HG/T 5682-2020 Green design product evaluation technical specifications for water-based architectural coatings
  • YB/T 4690-2018 Refractory spray coating for blast furnace infrastructure
  • YB/T 4691-2018 Refractory spray coating for hot blast stove infrastructure
  • JC/T 1017-2020 Polymer emulsion for building waterproofing materials

Korean Agency for Technology and Standards (KATS), architectural coating voc

住房和城乡建设部, architectural coating voc

  • JG/T 572-2019 Fire retardant coatings for building wood structures
  • JG/T 512-2017 General technical requirements for building exterior wall coatings
  • JG/T 540-2017 Flexible imitation stone facing materials for construction

Canadian General Standards Board (CGSB), architectural coating voc

Professional Standard - Building Materials, architectural coating voc

  • JC/T 2079-2011 Elastomeric stucco for building
  • JC/T 1017-2006 Polymer emulsions for building waterproofing coatings
  • JC/T 60013-2022 Technical specification for application of multi-layer architectural coatings
  • JC/T 1040-2007 Exterior reflective thermal insulating coatings on buildings
  • JC/T 864-2008 Polymer emulsion architectural waterproof coating
  • JC/T 864-2000 Polymer emulsion architectural waterproof coating
  • JC/T 2663-2022 Test method for water absorption of architectural waterproof coating film
  • JC 1066-2008 Limit of harmful substances of building waterproof coatings
  • JC/T 24-2000 Synthetic resin emulsion sand wall architectural coating
  • JC/T 884-2001 Building sealant intended to be used in color coated steel plates
  • JC/T 2438-2018 Auluminium panels and coils with single fluorocarbonfilm for building decoration
  • JC/T 1046.1-2007 Glazes and stains for building and sanitary ceramics Part 1: Glazes for building and sanitary ceramics
  • JC/T 1046.2-2007 Glazes and stains for building and sanitary ceramics Part 2: Stains for building and sanitary ceramics
  • JC/T 2328-2015 Colored sand for building decoration

CZ-CSN, architectural coating voc

Professional Standard - Non-ferrous Metal, architectural coating voc

  • YS/T 680-2008 Powder for coating profiles of aluminium alloy for architecture
  • YS/T 728-2010 Acrilic eletrodeposition paint for aluminium alloy extruded profiles for architecture

Standard Association of Australia (SAA), architectural coating voc

  • HB 73.4-1995 Handbook of Australian Paint Standards - Architectural paints
  • AS 3730.27:2006 Guide to the properties of paints for buildings - Clear coatings for interior timber floors
  • AS 3730.29:2006 Guide to the properties of paints for buildings - Solvent-borne - Exterior/interior - Paving paint
  • AS 3730.15:2006 Guide to the properties of paints for buildings - Primer - Latex - For metallic zinc surfaces
  • AS 3730.16:2006 Guide to the properties of paints for buildings - Latex - Self-priming timber finish - Exterior
  • AS 3730.7:2006 Guide to the properties of paints for buildings - Latex - Exterior - Flat
  • AS 3730.8:2006 Guide to the properties of paints for buildings - Latex - Exterior - Low-gloss
  • AS 3730.9:2006 Guide to the properties of paints for buildings - Latex - Exterior - Semi-gloss
  • AS 3730.12:2006 Guide to the properties of paints for buildings - Latex - Interior - Gloss
  • AS 3730.1:2006 Guide to the properties of paints for buildings - Latex - Interior - Flat
  • AS 3730.2:2006 Guide to the properties of paints for buildings - Latex - Interior - Semi-gloss
  • AS 3730.13:2006 Guide to the properties of paints for buildings - Primer - Wood - Solvent-borne - Interior/exterior
  • AS 3730.17:2006 Guide to the properties of paints for buildings - Primer - Wood - Latex - Interior/exterior
  • AS 3730.21:2006 Guide to the properties of paints for buildings - Primer - Solvent-borne - For ferrous metallic surfaces
  • AS 3730.22:2006 Guide to the properties of paints for buildings - Concrete and masonry sealer - Solvent-borne - Interior/exterior
  • AS 3730.100:2006 Guide to the properties of paints for buildings - Introduction and list of guides
  • AS 4361.2:1998 Guide to lead paint management - Residential and commercial buildings
  • AS 3730.25:2006 Guide to the properties of paints for buildings - Clear finish - Solvent-borne - Interior
  • AS 3730.0:2006 Guide to the properties of paints for buildings - General information on the specification, purchasing and testing of paints
  • AS 3730.14:2006 Guide to the properties of paints for buildings - Undercoat - Solvent-borne - Interior/exterior
  • AS 3730.10:2006 Guide to the properties of paints for buildings - Latex - Exterior - Gloss
  • AS 3730.5:2006 Guide to the properties of paints for buildings - Solvent-borne - Interior - Semi-gloss
  • AS 3730.28:2006 Guide to the properties of paints for buildings - Wood stain - Solvent-borne - Exterior
  • AS 3730.6:2006 Guide to the properties of paints for buildings - Solvent-borne - Interior/exterior - Full gloss enamel
  • AS 3730.3:2006 Guide to the properties of paints for buildings - Latex - Interior - Low gloss
  • AS 3730.18:2006 Guide to the properties of paints for buildings - Undercoat/sealer - Latex - Interior/exterior
  • AS 3730.100:1994 Guide to the properties of paints for buildings Part 100: Introduction and list of guides
  • AS 3730.26:1993 Guide to the properties of paints for buildings Part 26: Floor varnish- Moisture cured
  • AS 3730.30:1993 Guide to the properties of paints for buildings Part 30: Stain sealer-Latex
  • AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
  • AS 3730.24:1993 Guide to the properties of paints for buildings Part 24: Wood stain-Solvent-Borne-Interior

Shanghai Provincial Standard of the People's Republic of China, architectural coating voc

  • DB31/T 15-1998 Healthy Building Interior Wall Coatings
  • DB31/ 711-2013 Energy Consumption Quotas per Unit Product of Architectural Coatings
  • DB31/ 711-2020 Energy Consumption Quotas per Unit Product of Architectural Coatings

The Society for Protective Coatings (SSPC), architectural coating voc

  • SSPC QP 9-2008 Standard for Evaluating Qualifications of Painting Contractors Who Apply Architectural Paints and Coatings

American Society for Testing and Materials (ASTM), architectural coating voc

  • ASTM D5069/D5069M-13(2019) Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
  • ASTM D5324-16(2022) Standard Guide for Testing Water-Borne Architectural Coatings
  • ASTM D5150-92(2003) Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
  • ASTM E1797-12(2017)e1 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM D4946-89(2003) Standard Test Method for Blocking Resistance of Architectural Paints
  • ASTM D5324-16 Standard Guide for Testing Water-Borne Architectural Coatings
  • ASTM E1796-20 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM D5150-92(2009) Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
  • ASTM D5150-92(2013) Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
  • ASTM D5146-98 Standard Guide to Testing Solvent-Borne Architectural Coatings
  • ASTM D4946-89(1999) Standard Test Method for Blocking Resistance of Architectural Paints
  • ASTM D5324-98 Standard Guide for Testing Water-Borne Architectural Coatings
  • ASTM D4946-89(2017) Standard Test Method for Blocking Resistance of Architectural Paints
  • ASTM D5324-10 Standard Guide for Testing Water-Borne Architectural Coatings
  • ASTM E1796-03(2016) Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM A755/A755M-03(2008) Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
  • ASTM D5146-03 Standard Guide to Testing Solvent-Borne Architectural Coatings
  • ASTM D5324-03 Standard Guide for Testing Water-Borne Architectural Coatings
  • ASTM D4946-89(2008)e1 Standard Test Method for Blocking Resistance of Architectural Paints
  • ASTM D5146-10(2019) Standard Guide to Testing Solvent-Borne Architectural Coatings
  • ASTM D4946-89(2012) Standard Test Method for Blocking Resistance of Architectural Paints
  • ASTM D3730-17(2022) Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
  • ASTM D5146-10 Standard Guide to Testing Solvent-Borne Architectural Coatings
  • ASTM D2064-91(1998) Standard Test Method for Print Resistance of Architectural Paints
  • ASTM D2064-91(2012) Standard Test Method for Print Resistance of Architectural Paints
  • ASTM D2064-91(2016) Standard Test Method for Print Resistance of Architectural Paints
  • ASTM D2064-91(2003) Standard Test Method for Print Resistance of Architectural Paints
  • ASTM D2064-91(2008) Standard Test Method for Print Resistance of Architectural Paints
  • ASTM E1795-20 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM E1795-20a Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM E1795-17 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM D5150-92(1997)e1 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
  • ASTM D5150-92(2017) Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
  • ASTM E1494-92(2002) Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
  • ASTM D3730-17 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
  • ASTM D6266-00a(2017) Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
  • ASTM D7787/D7787M-13(2022) Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
  • ASTM E1494-92(2010) Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
  • ASTM D3450-15(2020) Standard Test Method for Washability Properties of Interior Architectural Coatings
  • ASTM D3450-15 Standard Test Method for Washability Properties of Interior Architectural Coatings
  • ASTM D7514-09 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
  • ASTM E1494-92(1996) Standard Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials
  • ASTM D7394-08 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • ASTM D3450-00(2005) Standard Test Method for Washability Properties of Interior Architectural Coatings
  • ASTM D3450-00 Standard Test Method for Washability Properties of Interior Architectural Coatings
  • ASTM D3450-00(2010)e1 Standard Test Method for Washability Properties of Interior Architectural Coatings
  • ASTM C1841-22 Standard Specification for Interior Radiation Control Coating (IRCC) for Building Applications
  • ASTM D5069-07 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
  • ASTM C1848-17 Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
  • ASTM D4851-07(2015) Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
  • ASTM C1483-04 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
  • ASTM B101-22 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • ASTM D7489-09(2017) Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
  • ASTM D7514-14(2022) Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

ZA-SANS, architectural coating voc

  • SANS 10305-1:2005 Painting of buildings Part 1: Paint and paint selection
  • SANS 10305-3:2005 Painting of buildings Part 3: Paint types
  • SANS 10305-2:2005 Painting of buildings Part 2: Paint application and defects
  • SANS 1796:2009 Application of durable organic powder coatings for architectural aluminium
  • SANS 1578:2006 Durable organic powders for coating of external architectural aluminium
  • SANS 1796:2003 Coatings of durable organic powder for external architectural aluminium

PL-PKN, architectural coating voc

  • PN B10285-1969 Pointing of buildings with points, lacquers and enamels on binders others than water
  • PN B89020-1993 Building plastics products. Coating for hand-rails in plastified poly (vinyl chloride)
  • PN B10280-1969 Painting works by water paints and aqucous emulsion paints in buildinge
  • PN B10102-1991 Paints for building facades. Requirements and tests
  • PN-EN 12206-1-2021-10 E Paints and varnishes -- Coating of aluminium and aluminium alloys for architectural purposes -- Part 1: Coatings prepared from thermosetting coating powder
  • PN B32250-1988 Building materials Water for betons and mortars

Anhui Provincial Standard of the People's Republic of China, architectural coating voc

  • DB34/T 1505-2011 Technical specification for the application of architectural reflective and thermal insulation coatings

国家市场监督管理总局、中国国家标准化管理委员会, architectural coating voc

  • GB 18582-2020 Limit of harmful substances of architectural wall coatings
  • GB/T 34909-2018 Evaluation standard of material-saving for civil building

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), architectural coating voc

  • ASHRAE AT-01-13-1-2001 Correlations between the Internal Diffusion and Equilibrium Partition Coefficients of Volatile Organic Compounds (VOCs) in Building Materials and the VOC Properties

US-FCR, architectural coating voc

Danish Standards Foundation, architectural coating voc

  • DS/EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
  • DS/EN 12206-1:2021 Paints and varnishes – Coating of aluminium and aluminium alloys for architectural purposes – Part 1: Coatings prepared from thermosetting coating powder
  • DS/EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes

Lithuanian Standards Office , architectural coating voc

  • LST EN 12206-1-2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
  • LST EN 12206-1-2021 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder
  • LST EN 13438-2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes

AENOR, architectural coating voc

  • UNE-EN 12206-1:2005 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
  • UNE-EN 13438:2014 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes

Liaoning Provincial Standard of the People's Republic of China, architectural coating voc

  • DB21/T 2001-2012 Technical specification for the application of imitation granite coatings on building exterior walls

AT-ON, architectural coating voc

  • ONORM C 2350-2000 Coating materials for coating systems applied on dimensionally stable exterior building construction of wood-Minimum requirements and tests
  • OENORM EN 12206-1-2021 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder

ES-UNE, architectural coating voc

  • UNE-EN 12206-1:2022 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder

German Institute for Standardization, architectural coating voc

  • DIN EN 12206-1:2021-07 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder; German version EN 12206-1:2021
  • DIN EN 12206-1:2019 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder; German and English version prEN 12206-1:2019
  • DIN EN 15619:2009 Rubber or plastic-coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version EN 15619:2008
  • DIN EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version EN 15619:2014
  • DIN EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder; German version EN 12206-1:2004
  • DIN 55634:2010 Paints, varnishes and coatings - Corrosion protection of supporting thin-walled building components made of steel
  • DIN EN 15619:2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version EN 15619:2008+A1:2010
  • DIN EN 13438 Berichtigung 1:2007 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005, Corrigenda to DIN EN 13438:2006-01
  • DIN 18147-5:1987 Building material and building elements for three-layered chimneys; insulating materials; requirements and tests
  • DIN 18363:2019-09 German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Painting and coating work - Coatings
  • DIN 4102-4:2016 Fire behaviour of building materials and building components - Part 4: Synopsis and application of classified building materials, components and special components
  • DIN 4102-4:1994 Fire behaviour of building materials and building components; synopsis and application of classified building materials, components and special components
  • DIN EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes; German version EN 13438:2013
  • DIN EN 13438:2013-12 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes; German version EN 13438:2013
  • DIN 52452-4:1992 Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings
  • DIN 4102-4/A1:2023-04 Fire behaviour of building materials and building components - Part 4: Synopsis and application of classified building materials, components and special components; Amendment A1 / Note: Date of issue 2023-03-24*Intended as an amendment to DIN 4102-4 (2...
  • DIN 4102-4:2016-05 Fire behaviour of building materials and building components - Part 4: Synopsis and application of classified building materials, components and special components / Note: To be amended by DIN 4102-4/A1 (2018-11).

HU-MSZT, architectural coating voc

CH-SNV, architectural coating voc

  • SN EN 12206-1-2021 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder

IT-UNI, architectural coating voc

  • UNI EN 12206-1-2021 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder

European Committee for Standardization (CEN), architectural coating voc

  • EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
  • EN 12206-1:2021 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder
  • EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
  • EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
  • EN 1062-1:2004 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification
  • EN 1062-1:1996 Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonry and Concrete - Part 1: Classification
  • EN 15619:2008 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures Incorporates Amendment A1: 2010
  • prEN 13055 Lightweight aggregates for construction works - Characteristics
  • EN 1062-3:2008 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability
  • EN 1062-3:1998 Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonry and Concrete - Part 3: Determination and Classification of Liquid-Water Transmission Rate (Permeability)
  • EN 1062-7:2004 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties
  • EN 1062-11:2002 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing
  • EN 1062-6:2002 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability
  • prEN 536-1991 Road construction machines; machines for the production of building materials; safety requirements
  • EN ISO 9346:1996 Thermal Insulation - Mass Transfer - Physical Quantities and Definitions (ISO 9346 : 1987)

American National Standards Institute (ANSI), architectural coating voc

  • ANSI/NFPA 703-2012 Standard for Fire Retardant Treated-Wood and Fire-Retardant Coatings for Building Materials
  • ANSI/ASTM E1494a:1992 Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials (04.11)
  • ASTM C1841-23 Standard Specification for Interior Radiation Control Coating (IRCC) for Building Applications

National Fire Protection Association (NFPA), architectural coating voc

  • NFPA 703-2012 Standard for Fire Retardant-Treated Wood and Fire-Retardant Coatings for Building Materials Effective Date: 08/31/2011
  • NFPA 703-2005 Standard for Fire RetardantTreated Wood and Fire-Retardant Coatings for Building Materials 2006 Edition
  • NFPA 703-2009 Standard for Fire Retardant朤reated Wood and Fire-Retardant Coatings for Building Materials Effective Date: 7/18/2008
  • NFPA 703-2015 Standard for Fire Retardant?Treated Wood and Fire-Retardant Coatings for Building Materials (Effective Date: 07/29/2014)
  • NFPA 703-2021 Standard for Fire-Retardant-Treated Wood and Fire-Retardant Coatings for Building Materials (Effective Date: 04/04/2020)

Beijing Provincial Standard of the People's Republic of China, architectural coating voc

  • DB11/T 1343-2016 Specifications for construction and acceptance of building interior and exterior wall coatings
  • DB11/ 1245-2015 Specifications for engineering design, construction and acceptance of building fireproof coatings (boards)

Indonesia Standards, architectural coating voc

CEN - European Committee for Standardization, architectural coating voc

  • EN 13438:2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes

未注明发布机构, architectural coating voc

  • BS 8216:1991(1999) Code of practice for Use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
  • BS 8202:1995(1999) Coatings for fire protection of building elements — Part 1 : Code of practice for the selection and installation of sprayed mineral coatings
  • BS 3987:1991(2001) Specification for Anodic oxidation coatings on wrought aluminium for external architectural applications

YU-JUS, architectural coating voc

  • JUS U.M8.300-1985 Determination of tha capillary water absorption of buildlng matorial and coatfngs

Professional Standard - Ferrous Metallurgy, architectural coating voc

Professional Standard - Environmental Protection, architectural coating voc

TH-TISI, architectural coating voc

  • TIS 1897-1999 Cellular plastics, rigid.spray.applied polyurethane foam for thermal insulation of buildings.specification
  • TIS 2542.2-2013 Concrete building.part 2: materials for concrete building

VN-TCVN, architectural coating voc

  • TCVN 7471-2005 Prefinished/prepainted sheet metal products for interior/exterior building applications
  • TCVN 6598-2000 Raw materials for construction ceramics.Feldspar
  • TCVN 6927-2001 Raw materials for producing construction ceramics.Quartz

SSPC - The Society for Protective Coatings, architectural coating voc

  • QP 9-2008 Standard for Evaluating Qualifications of Painting Contractors Who Apply Architectural Paints and Coatings

Professional Standard - Public Safety Standards, architectural coating voc

  • GA 110-1995 Test method for performance of fireproof spraying materials for building components

CU-NC, architectural coating voc

  • NC 54-03-1986 Construction Materials and Products. Sea Sand for Construction Works. Utilization Rules

国家建筑材料工业局, architectural coating voc

Institute of Electrical and Electronics Engineers (IEEE), architectural coating voc

  • NFPA (Fire) 703 Standard for Fire-Retardant Treated Wood and Fire-Retardant Coatings for Building Materials, 2021 Edition

International Organization for Standardization (ISO), architectural coating voc

  • ISO/TR 20436:2017 Buildings and civil engineering works — Sealants — Paintability and paint compatibility of sealants
  • ISO 8873:1987 Cellular plastics, rigid; Spray-applied polyurethane foam for thermal insulation of buildings; Specification
  • ISO 28722:2008 Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture
  • ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary

ES-AENOR, architectural coating voc

NZ-SNZ, architectural coating voc

  • AS/NZS 4548.1:1999 Guide to Long-Life Coatings for Concrete and Masonry Part 1: Wall Coatings - Latex Extensible

Guangdong Provincial Standard of the People's Republic of China, architectural coating voc

  • DB44/T 1544-2015 Determination of Aromatic Compounds in Architectural Waterproof Coatings by Gas Chromatography-Mass Spectrometry

SG-SPRING SG, architectural coating voc

  • CP 1-2001 CODE OF PRACTICE FOR The use of timber in buildings

Professional Standard - Agriculture, architectural coating voc

  • NY/T 669-2003 Regenerate plastics pipes for drainage in buildings

PT-IPQ, architectural coating voc

  • NP EN 1062-3-2001 Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 3:Determination and classification of liquid-water transmission rate(permeability)

Professional Standard - Urban Construction, architectural coating voc

  • CJ/T 233-2016 Plastic inspection chamber for sewerage in building area
  • CJ/T 233-2006 Plastics inspection chambers for sewerage in building area




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved