ZH
RU
ES
melting point
melting point, Total:305 items.
In the international standard classification, melting point involves: Materials for aerospace construction, Electrical accessories, Linear and angular measurements, Pharmaceutics, Environmental testing, Welding, brazing and soldering, Testing of metals, Road vehicle systems, Internal combustion engines for road vehicles, Products of the chemical industry, Organic chemicals, Aircraft and space vehicles in general, Analytical chemistry, Pesticides and other agrochemicals, Crude petroleum, Glass, Edible oils and fats. Oilseeds, Textile fibres, Plastics, Coals, Waxes, bituminous materials and other petroleum products, Rubber and plastics products, Equipment for the metallurgical industry, Non-ferrous metals, Adhesives, Photography, Meat, meat products and other animal produce, Environmental protection, Protection against dangerous goods, Physics. Chemistry, Farming and forestry, Telecommunication systems, Petroleum products in general, Mechanical testing, Resistors, Paint ingredients, Vocabularies, Medical equipment, Electrical wires and cables, Electronic display devices, Protective equipment.
RO-ASRO, melting point
- STAS 11174/1-1978 Antiblister and lubricating materials for steel pouring DETERMINATION OF FLOW POINT AND TIME OF DUSTS MELTING FOR STEEL POURING
- STAS 10992-1977 Determination of melting point and melting interval by capillary method
- STAS 145/7-1989 VEGETABLE OILS AND FATS Melting point determination
- STAS 12229-1984 WELDED JOINTS IN SMELTED POINTS Forms and dimensions
- STAS 11958-1984 LOW-MELTING ALLOYS Grades and technical requirements for quality
- STAS 128/1-1981 Refractory products DIRECT DETERMINATION OF DISTORTION POINT AT COMPRESSION
Society of Automotive Engineers (SAE), melting point
- SAE AMS5893B-2006 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion UNS N19909
- SAE J1888-1990 High Current Time Lag Electric Fuses
- SAE AMS5337-1971 STEEL CASTINGS, INVESTMENT, MARAGING 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted
- SAE AMS3415-1960 FLUX, ALUMINUM DIP BRAZING 1030 F Fusion Point
- SAE AMS3416-1960 FLUX, ALUMINUM DIP BRAZING 1090 F Fusion Point
- SAE AMS3416A-1995 FLUX, ALUMINUM DIP BRAZING 1090°F (588°C) Fusion Point
- SAE AMS5337A-1989 STEEL CASTINGS, INVESTMENT, MARAGING 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
- SAE AMS5337C-2001 Steel, Maraging, Investment Castings, 18.5Ni 9.0Co 5.0Mo 0.70Ti 0.12Al, Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
- SAE AMS5339E-2001 Steel, Maraging, Investment Castings, 17Ni -10Co 4.6Mo 0.30Ti 0.06Al, Vacuum Melted Homogenized, Overaged and Solution Heat Treated
- SAE AMS5339E-2000 Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
- SAE AMS5339F-2012 Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
- SAE AMS5339H-2022 Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
- SAE AMS5339-1969 STEEL CASTINGS, INVESTMENT, MARAGING 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al
- SAE AMS5339A-1974 STEEL CASTINGS, INVESTMENT, MARAGING 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al
- SAE AMS5339B-1982 STEEL CASTINGS, INVESTMENT, MARAGING 17Ni - 10Co - 4.6Mo - 0.3Ti - 0.06Al Homogenized, Overaged, and Solution Heat Treated
- SAE AMS6522C-2011 Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged
- SAE AMS6522A-1994 STEEL PLATE 2.OCr - 1ONi - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged
German Institute for Standardization, melting point
- DIN 49343:1976 Time-lag symbol for D-type fuse-links
- DIN 49343:1976-01 Time-lag symbol for D-type fuse-links
- DIN 41571-3:1984 Miniature fuses; cartridge fuse links 250 V; interchangeable, time-lag (T)
- DIN ISO 3841:1983 Petroleum waxes; determination of melting point (cooling curve)
- DIN 41687:1988 Miniature fuses; cartridge fuse-links E 16 250 V; non interchangeable, medium time-lag (M)
- DIN 41571-2:1984 Miniatur fuses; cartridge fuse links 250 V, interchangeable, medium time-lag (M)
- DIN 51532:2012 Petroleum waxes - Determination of melting point (cooling curve)
- DIN 51532:2012-12 Petroleum waxes - Determination of melting point (cooling curve)
- DIN EN 300636:2001-10 Fixed radio systems - Point-to-multipoint equipment - Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 1 GHz to 3 GHz (Endorsement of the English version EN 300636 V 1.3.1 (2001-02) as Germ...
- DIN 41577-2:1984 Miniature fuses; indicating fuse links 250 V, non interchangeable, medium time-lag (M)
- DIN EN ISO 6321:2021-09 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021); German version EN ISO 6321:2021
- DIN 41686:1987-06 Miniature fuses; cartridge fuse-links 500 V, interchangeable, medium time lag (M), quick acting (F)
- DIN 41686:1987 Miniature fuses; cartridge fuse-links 500 V, interchangeable, medium time lag (M), quick acting (F)
- DIN 41576-2:1987 Minature fuses; indicating cartridge fuse-links 250 V, interchangeable, medium time-lag (M)
- DIN 52327-1:1977 Testing of glass; determination of stresses in glass-to-glass sealings
- DIN VDE 0472-621:1983 Testing of cables, wires and flexible cords; crystallite melting point VDE Specification
- DIN 19015:1983-06 Timing in between-the-lens-shutters; technical terms, exposure times, synchro contacts, measuring devices
IN-BIS, melting point
U.S. Military Regulations and Norms, melting point
PL-PKN, melting point
Professional Standard - Machinery, melting point
工业和信息化部, melting point
ESDU - Engineering Sciences Data Unit, melting point
- ESDU 87028-1987 Melting points@ boiling points and critical properties.
- ESDU 72006-1972 Normal melting points@ boiling points and critical points of monobasic alkanoic acids.
- ESDU 71023 A-1976 Normal melting points@ boiling points and critical points of n-alkyl aldehydes and ketones.
- ESDU 71021-1971 Normal melting points@ boiling points and critical points of branched chain esters of monobasic alkanoic acids.
- ESDU 71001-1971 Normal melting points@ boiling points and critical points of n-alkyl esters of monobasic n-alkanoic acids.
American Society for Testing and Materials (ASTM), melting point
- ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM E324-99 Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM F766-82(2005) Standard Test Method for Melting Point of Waxes
- ASTM B774-00(2005) Standard Specification for Low Melting Point Alloys
- ASTM B774-00 Standard Specification for Low Melting Point Alloys
- ASTM F766-82(2000)e1 Standard Test Method for Melting Point of Waxes
- ASTM F766/F766M-82(2010)e1 Standard Test Method for Melting Point of Waxes
- ASTM B774-00(2005)e1 Standard Specification for Low Melting Point Alloys
- ASTM B774-00(2014) Standard Specification for Low Melting Point Alloys
- ASTM B774-00(2010) Standard Specification for Low Melting Point Alloys
- ASTM D1465-04 Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM D1465-10(2015) Standard Test Method for Blocking and Picking Points of Petroleum Wax
- ASTM B774/B774M-21 Standard Specification for Low Melting Point Alloys and Solders
- ASTM D127-87(2004) Standard Test Method for Drop Melting Point of Petroleum Wax Including Petrolatum
- ASTM D127-63(1977) Standard Test Method for Drop Melting Point Of Petroleum Wax Including Petrolatum
- ASTM D127-19 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D5440-93(2003) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D5440-93(1997) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D5440-93(2009) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
- ASTM D5440-17 Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM E324-79(1989)e1 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM E324-16 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
- ASTM D4497-94(1999) Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
RU-GOST R, melting point
- GOST 22974.1-1996 Melted welding fluxes. Methods of flux decomposition
- GOST 22974.1-1985 Melted welding fluxes. Methods of flux decomposition
- GOST 7658-1974 Synthetic high-melting ceresin. Specifications
- GOST 25183.6-1982 Photographic gelatine. Method of determination of melting temperature
- GOST 33454-2015 Testing of chemicals of environmental hazard. Determination of the melting point/melting range
- GOST 4255-1975 Petroleum products. Method for determination of melting point by Zhukov
- GOST 14618.12-1978 Essential oils, aromatics and their intermediates. Methods for determination of distillation, melting and congelation temperature limits
- GOST 27648-1988 Veriable resistors. Low voltage method of testing of moveable contact intermediate resistance
(U.S.) Ford Automotive Standards, melting point
Defense Logistics Agency, melting point
- DLA A-A-59703 A-2006 FUSE CARTRIDGE, TIME-DELAY, CLASS J, 600 VOLTS (V), BLOWN FUSE INDICATION
- DLA MIL-DTL-25539 C-2009 CANDLES, ILLUMINATING, SURVIVAL, HIGH MELTING POINT
- DLA MIL-DTL-25539 C VALID NOTICE 1-2013 Candles, Illuminating, Survival, High Melting Point
- DLA A-A-59704 A-2006 FUSE CARTRIDGE, DUAL-ELEMENT, TIME-DELAY, CLASS RK1 600 VOLTS (V), BLOWN FUSE INDICATION
- DLA A-A-59746 A-2007 FUSE, CARTRIDGE, SUBMINIATURE, TIME DELAY, AXIAL LEAD
BE-NBN, melting point
未注明发布机构, melting point
- BS 4633 & 04634:1970(2011) Method for The determination of crystallizing point Method for The determination of melting point and / or melting range
- BS ISO 8820-4:2010 Road vehicles — Fuse - links Part 4 : Fuse - links with female contacts (type A) and bolt - in contacts (type B) and their test fixtures
Professional Standard - Electron, melting point
- SJ 2955-1988 Time-lag cartridge fuse-links
- SJ 3232.4-1989 Determination method of crystallization time of low-melting welding glass powder
HU-MSZT, melting point
NL-NEN, melting point
Taiwan Provincial Standard of the People's Republic of China, melting point
- CNS 3210-1981 Spot Welders for Steel Plate
- CNS 8835-1996 Methods of Test for Melting Point and Melting Range of Chemical Products
- CNS 13253-1993 Method of Inspection for Spot Welds
- CNS 13252-1993 Method of Tension Test for Spot Welded Joints
- CNS 13164-1993 Method of Tension Shear Test for Spot Welded Joints
- CNS 13165-1993 Method of Macro Test for Section of Spot Welded Joints
- CNS 8488-1982 Design Methods of Spot Welded Joints for Railway Rolling Stock
- CNS 8452-2003 Method of test for edible oils and fats－Determination of slip melting point (Open-tube method)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, melting point
- GB/T 14457.3-2008 Fragrance/Flavor substances.Method for determination of melting point
- GB/T 1602-2001 Testing method of melting point for pesticides
- GB/T 12766-1991 Animal fats and oils--Determination of melting point
- GB/T 12766-2008 Animal fat and oil.Determination of melting point
- GB/T 2559-1981 Lignite wax--Determination of melting point
- GB/T 14235.1-1993 Surface roughness for plastic parts
- GB/T 5536-1985 Inspection of vegetable oils--Methods for determination of melting point
- GB 5536-1985 Determination of melting point of vegetable fats and oils
- GB/T 21781-2008 Test methods for melting point and melting range of chemical products.Capillary tube method
- GB/T 6843-1986 Method for determining the coating melting point of photographic materials
- GB 6843-1986 Determination method of melting point of photosensitive material coating
- GB/T 24892-2010 Animal and vegetable fats and oils-Determination of melting point in open capillary tubes(slip point)
- GB/T 8026-1987 Petroleum waxes and petrolatums--Determination of drop melting point
- GB/T 2539-2008 Petroleum waxes. Determination of melting point. Cooling curve method
- GB/T 8026-2014 Standard test method for drop melting point of petroleum wax,including petrolatum
- GB/T 2539-2023 Determination of melting point of petroleum wax by cooling curve method
- GB/T 8026-2023 Determination of melting point of petroleum wax and petroleum grease droplets
- GB/T 15332-1994 Determination of the softening point of hot-melt adhesives--Ball and ring method
- GB/T 617-1988 Chemical reagent--General method for the determination of melting range
- GB/T 617-2006 Chemical reagent General method for the determination of melting range
- GB/T 2384-2015 Dyes intermediates.General method for the determination of melting range
- GB/T 2384-1992 Dye intermediates general method for the determination of melting range
- GB/T 2384-2007 Dyes intermediates.General method for the determination of melting range
- GB/T 4608-1984 Test for melting point of semicrystalline polymers--Optical method
- GB/T 11409.1-1995 Test method of fusion point for rubber antiagers and vulcanizing accelerators
- GB 4608-1984 Test for melting point of semicrystalline polymers－Optical method
United States Navy, melting point
- NAVY MIL-C-82604 NOTICE 1-1996 COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- NAVY MIL-C-82604 (1)-1973 COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- NAVY MIL-C-82604-1973 COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- NAVY MIL-C-82604 NOTICE 2-2008 COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING)
- NAVY O-F-499 D VALID NOTICE 1-1991 FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT)
- NAVY O-F-499 D-1985 FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT)
- NAVY MIL-M-15842 B-1964 MORTAR, REFRACTORY (HIGH TEMPERATURE, AIR SETTING)
Korean Agency for Technology and Standards (KATS), melting point
British Standards Institution (BSI), melting point
- BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
- BS ISO 8820-4:2016 Road vehicles. Fuse-links. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
- BS ISO 8820-4:2011 Road vehicles. Fuse-links. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
- BS EN 970:1997 Non-destructive examination of fusion welds - Visual examination
- BS 4695:1980 Method for determination of melting point of petroleum wax (cooling curve)
- BS EN ISO 6321:2002 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)
- BS EN ISO 6321:2021 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes. Slip point
- BS EN ISO 17637:2011 Non-destructive testing of welds. Visual testing of fusion-welded joints
- BS ISO 8820-8:2012 Road vehicles. Fuse-links. Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
- 20/30406608 DC BS ISO 20965. Plastics. Determination of the transient extensional viscosity of polymer melts
Indonesia Standards, melting point
Professional Standard - Agriculture, melting point
- GB 1602-1979 Method for Determination of Melting Point of Pesticides
- 1772药典 一部-2010 Appendix VII C Melting point determination method
- 2314药典 二部-2010 Appendix VI C Melting Point Determination Method
- NY/T 1860.20-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 20: Melting point/melting range
- 92药典 四部-2015 0600 Determination of physical constants 0612 Determination of melting point
- 73药典 四部-2020 0600 Determination of physical constants 0612 Determination of melting point
- GB 617-1988 General method for determination of melting point range of chemical reagents
Professional Standard - Textile, melting point
- FZ/T 54125-2020 Low melting point polyester drawn yarn
- FZ/T 54126-2020 Low melting point polyester/polyester composite drawn yarn
- FZ/T 54121-2019 Low melting point polyester (LMPET) / polyester (PET) composite monofilament
- FZ/T 52051-2018 Low melting point polyester(LMPET)/polyester(PET)bicomponent staple fiber
- FZ/T 52052-2018 Low Melting Polyester (LMPET)/Recycled Polyester (RPET) Composite Staple Fiber
- FZ/T 52058-2021 Low melting point polylactic acid (LMPLA)/polylactic acid (PLA) composite staple fiber
Group Standards of the People's Republic of China, melting point
CZ-CSN, melting point
- CSN 66 6409-1967 Determining the melting point of photo graphic layers
- CSN ISO 6321:1994 Animal and vegetables fats and oils.Determination of melting point in open capillary tubes(slip point)
- CSN 42 0617 Cast.1-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of bismuth and lead by titrimetric method
- CSN 66 6653-1981 Determination of deformation temperature, liberating temperature and melting point
- CSN 42 0617 Cast.3-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of lead by the atomic absorption method
- CSN 42 0617 Cast.2-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of bismuth by the atomic absorption method
- CSN 58 8754-1994 Methods of test for fats and oils etermination of melting point by clearing
SE-SIS, melting point
U.S. Air Force, melting point
- AIR FORCE MIL-C-25539 B-1976 CANDLES, ILLUMINATING, SURVIVAL, HIGH MELTING POINT
- AIR FORCE MIL-T-38328 B (1)-1982 TAPE, TEXTILE, NYLON, AROMATIC, NONMELTING, REINFORCING
- AIR FORCE MIL-T-38328 B-1981 TAPE, TEXTILE, NYLON, AROMATIC, NONMELTING, REINFORCING
National Metrological Verification Regulations of the People's Republic of China, melting point
- JJG 701-1990 Verification Regulation of Melting-Point-Measuring Instruments with Capillary Method
- JJG 701-2008 Verification Regulation of Melting-point Measurement Instruments
- JJG 463-1996 Verification Regulation of Melting-Point-Measuring Instruments With Thermo-Micro-Method
ZA-SANS, melting point
GM North America, melting point
VN-TCVN, melting point
- TCVN 4336-1986 Organic compounds.Determination of melting point
- TCVN 6119-2007 Animal and vegetable fats and oils.Determination of melting point in open capillary tubes (slips point)
International Organization for Standardization (ISO), melting point
- ISO 1218:1975 Plastics; Polyamides; Determination of "melting point"
- ISO 6244:1982 Petroleum waxes and petrolatums; Determination of drop melting point
- ISO 3841:1977 Petroleum waxes; Determination of melting point (cooling curve)
- ISO 6321:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)
- ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
- ISO 6321:1991 Animal and vegetable fats and oils; determination of melting point in open capillary tubes (slip point)
Professional Standard - Chemical Industry, melting point
AENOR, melting point
- UNE 77403:1992 ECOTOXICOLOGY. PHYSICAL AND CHEMICAL PROPERTIES. MELTING POINT. MELTING RANGE.
- UNE 51100:1996 PETROLEUM WAXES AND PETROLATUMS. DETERMINATION OF DROP MELTING POINTS.
- UNE-EN ISO 6321:2003 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point). (ISO 6321:2002)
- UNE 84083:2005 Cosmetic raw materials. Determination of the melting point. Closed capillary method.
International Telecommunication Union (ITU), melting point
- ITU-T G.812-2004 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Study Group 15
- ITU-T G.8262-2015 Timing characteristics of synchronous Ethernet equipment slave clock (Study Group 15)
- ITU-T G.8273.2 AMD 2-2015 Timing characteristics of telecom boundary clocks and telecom time slave clocks Amendment 2 (Study Group 15)
- ITU-T G.812 NOTE 1-2005 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks Study Group 13
- ITU-T G.812 ERRATUM 1-2005 Timing requirements of slave clocks suitable for use as node clocks in synchronization networks; Erratum 1
CL-INN, melting point
Association Francaise de Normalisation, melting point
- NF T60-114:1970 Petroleum products. Melting point of paraffins.
- NF T76-106:1981 ADHESIVES. DETERMINATION OF THE CONVENTIONAL MELTING POINT OF ADHESIVES HOT-MELT. ("BALL AND RING" METHOD).
- NF T20-051:1985 Chemical products for industrial use. Determination of melting point. Method for the determination of cristallizing point (freezing point).
- NF C64-201:1977 Coupe-circuit à fusibles à fort pouvoir de coupure - Caractéristiques
- NF T60-226:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point).
- NF T60-226*NF EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
- NF Z85-521*NF EN 301021:2004 Fixed Radio Systems - Point-to-multipoint equipment - Time Division Multiple Access (TDMA) - Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz (V1.6.1)
国家市场监督管理总局、中国国家标准化管理委员会, melting point
- GB/T 40320-2021 Measuring method for mechanical melting temperature of aluminum alloy
- GB/T 2384-2021 Dyes intermediates—General method for the determination of melting range
Professional Standard - Petroleum, melting point
- SY/T 7516-1992 Determination of Pour Point of Modified Crude Oil by Melting Method
- SY/T 7516-2010 Determination of pour point of modified crude oil.Melting method
能源部, melting point
- SY 7516-1992 Determination of Pour Point of Modified Crude Oil by Melting Method
IETF - Internet Engineering Task Force, melting point
- RFC 1661-1994 Point-to-Point Protocol (PPP) (Part of Std 51; Obsoletes: 1548)
- RFC 3518-2003 Point-to-Point Protocol (PPP) Bridging Control Protocol (BCP) (Obsoletes RFC 2878)
YU-JUS, melting point
- JUS N.E5.742-1991 Minlature fuses. Cartri?ge fuse links 5 mm x 20 mm. Time-lag. Lcm-breaking capa- city
- JUS H.B8.717-1980 Analysis of technical 1, 2, 3, 4, 5, 6-hexachlorocyclohexane. Determination of melting-point
- JUS H.P8.096-1988 Testing of pesticides. Lindan, technical. Determination ofmelting point
- JUS N.E5.744-1991 Miniature fuses. Cartridge fuse links 5 mm x 20 mm. Time-lag (surge-proof). High-breaklng capacity
- JUS H.P8.087-1988 Testing of pesticides. DDT, technical. Determination of melting point
IL-SII, melting point
- S.I.740.3-1970 CARTRIDGE FUSE LINKS FOR MINIATURE FUSES: FUSE LINKS 20 mm x 5 mm, TIME-LAG, LOW-BREAKING CAPACITY.
Danish Standards Foundation, melting point
- DS/EN ISO 6321:2002 Animal vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)
- DS/EN ISO 6321:2021 Animal and vegetable fats and oils – Determination of melting point in open capillary tubes – Slip point (ISO 6321:2021)
- DS/ISO 6321:2021 Animal and vegetable fats and oils – Determination of melting point in open capillary tubes – Slip point
Professional Standard - Post and Telecommunication, melting point
- YD/T 1012-1999 Node clock set of digital synchronization network and its timing feature
National Metrological Technical Specifications of the People's Republic of China, melting point
- JJF 1926-2021 Calibration Specification for Thermocouples at Palladium Melting Point by Wire-Bridge Method
- JJF 1688-2018 Calibration Specification for Real-time Focus Meters
AR-IRAM, melting point
Professional Standard - Ferrous Metallurgy, melting point
AT-ON, melting point
- ONORM N 3001-1991 Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point)
- OENORM EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
IT-UNI, melting point
- UNI EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
European Committee for Standardization (CEN), melting point
- EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
- EN ISO 6321:2002 Animal and Vegetable Fats and Oils - Determination of Melting Point in Open Capillary Tubes (Slip Point)
- EN ISO 17637:2011 Non-destructive testing of welds - Visual testing of fusion-welded joints
ES-UNE, melting point
- UNE-EN ISO 6321:2022 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
Lithuanian Standards Office , melting point
- LST ISO 6244:1997 Petroleum waxes and petrolatums. Determination of drop melting point
- LST EN ISO 6321:2003 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002)
- LST EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
SAE - SAE International, melting point
- SAE AMS5339F-2007 Steel@ Maraging@ Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized@ Overaged@ and Solution Heat Treated (UNS J93010)
- SAE AMS5339G-2017 Steel@ Maraging@ Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized@ Overaged@ and Solution Heat Treated (UNS J93010)
- SAE AMS5339D-1995 STEEL CASTINGS, INVESTMENT, MARAGING 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al
- SAE AMS6522A-1989 Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted@ Normalized@ and Overaged
SG-SPRING SG, melting point
- SS 11 Pt.16-1986 Methods Of Sampling And Test For Oils And Fats Part 16 : Determination Of Melting Point (Slip Point)
CH-SNV, melting point
Professional Standard - Commodity Inspection, melting point
- SN/T 0801.5-1999 Animal and vegetable oils and fats for import and export.Method for the determination of melting point
- SN/T 3331-2012 Identification of low melting point polyester complex fiber
Professional Standard - Military and Civilian Products, melting point
- WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
Military Standard of the People's Republic of China-General Armament Department, melting point
- GJB 772.110-1991 Explosives Test Methods Melting Point Determination Capillary Method
- GJB/J 3050-1997 Calibration procedures for melting point measuring devices for explosives using the capillary method
- GJB 5309.26-2004 Test methods for pyrotechnics Part 26: Determination of bridge wire fusing time
Professional Standard - Customs, melting point
- HS/T 11-2006 Identification of low melting point polyester staple fiber
GOSTR, melting point
- GOST 18995.4-1973 Organic chemical products. Methods for determination of melting point interval
海关总署, melting point
- HS/T 46-2014 Identification method of low melting point composite polyester staple fiber
Professional Standard - Medicine, melting point
- YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry
Japanese Industrial Standards Committee (JISC), melting point
- JIS K 0064:1992 Test methods for melting point and melting range of chemical products
Professional Standard - Aerospace, melting point
- QJ 2196-1991 Test method for gas permeability coefficient of high melting point oxides
KR-KS, melting point
UY-UNIT, melting point
Anhui Provincial Standard of the People's Republic of China, melting point
TR-TSE, melting point
- TS 285-1965 TESTING OF STEEL - CREEP AND TIME - FRACTURE TEST ON FUSION VVELDED BUTT JOINTS
NO-SN, melting point
- NS 475-1978 Welding - Grooves for full penetration when welding aluminium from one side only