ZH
RU
ES

gel sample

gel sample, Total:245 items.

In the international standard classification, gel sample involves: Protection against fire, Cellular materials, Raw materials for rubber and plastics, Products of the chemical industry, Farming and forestry, Rubber, Footwear, Adhesives, Electricity. Magnetism. Electrical and magnetic measurements, Road engineering, Quality, Materials for aerospace construction, Paints and varnishes, Water quality, Plastics, Document imaging applications, General methods of tests and analysis for food products, Fuels, Products of the textile industry, Paint ingredients, Construction materials, Wood-based panels, Fruits. Vegetables, Earthworks. Excavations. Foundation construction. Underground works, Air quality, Analytical chemistry, Cork and cork products, Non-ferrous metals, Graphic technology, Wood technology processes, Microbiology.

PL-PKN, gel sample

PN C05056-1992 Synthetic rubber latex Sampling and specimen preparation
PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
PN C04277-1993 Rubber, vulcanized. Preparation of samples and test pieces. Physical test
PN C04213-1974 Rubber Preparation of samples for chemical analysis
PN C99460-09-1986 Sampling of photographic light sensitive materials for testing Guide sampling of aerofilms
PN A86034-14-1993 Milk and milk products. Microbiological examination. Enumeration of bacillus cereus. Colony count technique at 30 degree

British Standards Institution (BSI), gel sample

BS 4735:1974 Laboratory method of test for assessment of the horizontal burning characteristics of specimens no larger than 150 mm x 50 mm x 13 mm (nominal) of cellular plastics and cellular rubber materials when subjected to a small flame
BS EN ISO 17709:2018 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
BS ISO 1795:2007 Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
BS EN 13880-6:2004 Hot applied joint sealants - Method for the preparation of samples for testing
BS EN ISO 18314-4:2021 Analytical colorimetry. Metamerism index for pairs of samples for change of illuminant
BS 5293-19:1991 Sampling and testing carbon black for use in the rubber industry - Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)
BS 5293-21:1995 Sampling and testing carbon black for use in the rubber industry - Classification system for carbon blacks used in rubber products
BS ISO/TR 12031:2000 Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration
BS 6001-7:2001 Sampling procedures for inspection by attributes - Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
BS 6319-1:1983 Testing of resin and polymer/cement compositions for use in construction - Method for preparation of test specimens
BS 5293:1991 Sampling and testing carbon black for use in the rubber industry. Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)
BS ISO 4656:2012 Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
19/30354953 DC BS ISO 18314-4. Analytical colorimetry. Part 4. Metamerism index for pairs of samples at change of illuminant
BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
23/30456807 DC BS EN ISO 18314-4. Analytical colorimetry - Part 4. Metamerism index for pairs of samples for change of illuminant
BS ISO 12647-2:2013 Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Offset lithographic processes

YU-JUS, gel sample

JUS G.C1.053-1984 Ra w rubber. Sample preparation

International Organization for Standardization (ISO), gel sample

ISO 1796:1982 Rubber, raw — Sample preparation
ISO 1796:1972 Title missing - Legacy paper document
ISO 1795:1992 Rubber, raw, natural and synthetic; sampling and further preparative procedures
ISO 1795:2000 Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
ISO 17709:2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
ISO 1795:2007 Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
ISO 1795:2017 Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
ISO 4661-1:1986 Rubber, vulcanized — Preparation of samples and test pieces — Part 1: Physical tests
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO 6894:1984 Rubber compounding ingredients — Carbon black — Preparation of samples for determination of dibutylphthalate absorption number (compressed sample)
ISO 4648:1978 Rubber, vulcanized — Determination of dimensions of test pieces and products for test purposes
ISO/FDIS 18314-4:2023 Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
ISO 18314-4:2023 Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
ISO 4661-1:1993 Rubber, vulcanized or thermoplastic; preparation of samples and test pieces; part 1: physical tests
ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 12647-2:2013 Graphic technology.Process control for the production of half-tone colour separations, proof and production prints.Part 2: Offset lithographic processes
ISO 12647-2:2004 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 2: Offset lithographic processes
ISO 12647-2:1996 Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Part 2: Offset lithographic processes

CZ-CSN, gel sample

CSN 62 1180-1981 Synthetic rubber latices. Sampling and sample preparation.
CSN 62 1129-1986 Synthetic raw rubbers. Sampling and sample preparation

Professional Standard - Agriculture, gel sample

GB 9865-1988 Preparation of Vulcanized Rubber Samples and Test Specimens
GB 8084-1987 Natural rubber sample preparation
GB 8142-1987 Lac product sampling method
水产品质量安全检验手册 1.3.2.6-2005 Chapter 1 General Introduction Section 3 Sample Treatment 2. New Technology of Sample Pretreatment (6) Gel Permeation System
空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements
SN/T 5493-2023 Determination of 29 Fentanyls in Solid and Liquid Samples by Liquid Chromatography-Quadrupole/Time-of-Flight Mass Spectrometry

Korean Agency for Technology and Standards (KATS), gel sample

KS M ISO 1795:2007 Rubber, raw natural and raw synthetic-Sampling and further preparative procedures
KS M ISO 1795:2017 Rubber, raw natural and raw synthetic－Sampling and further preparative procedures
KS M ISO 17709-2005(2020) Footwear－Sampling location, preparation and duration of conditioning of samples and test pieces
KS M ISO 17709:2005 Footwear－Sampling location, preparation and duration of conditioning of samples and test pieces
KS M ISO 4661-1:2011 Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS M ISO 4661-1-2002(2007) Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS M ISO 4661-2:2020 Rubber, vulcanized — Preparation of samples and test pieces —Part 2: Chemical tests
KS M ISO 4648:2007 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
KS M ISO 4648:2011 Rubber, vulcanized or thermoplastic-Determination of dimensions of test pieces and products for test purposes
KS M ISO 4656-2017(2022) Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
KS M ISO 4656:2012 Rubber compounding ingredients－Carbon black－Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
KS M ISO 15166-1:2004 Adhesives－Methods of preparing bulk specimens－Part 1：Two-part systems
KS M ISO 15166-2:2004 Adhesives－Methods of preparing bulk specimens－Part 2：Elevated-temperature-curing one-part systems
KS M ISO 4656:2017 Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
KS I ISO 11338-2-2014(2019) Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrocarbons — Part 2: Sample preparation, clean-up and determination
KS X ISO 12647-2-2006(2016) Graphic technology－Process control for the manufacture of half-tone colour separations, proof and production prints－Part 2：Offset lithographic processes
KS X ISO 12647-2:2021 Graphic technology — Process control for the production of halftone colour separations, proof and production prints —Part 2: Offset lithographic processes
KS X ISO 12647-2-2006(2021) Graphic technology－Process control for the manufacture of half-tone colour separations, proof and production prints－Part 2：Offset lithographic processes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, gel sample

GB/T 8142-1987 Methods of sampling lac products
GB/T 8142-2008 Methods of sampling lac products
GB/T 8084-1987 Raw natural rubber--Sample preparation
GB/T 22050-2008 Footwear.Sampling location,preparation and duration of conditioning of samples and test pieces
GB/T 17783-1999 Rubber, vulcanized--Preparation of samples and test pieces--Chemical tests
GB/T 9865.1-1996 Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests
GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
GB/T 5723-1993 Rubber，vulcanized or thermoplastic.Determination of dimensions of test pieces and products for testpurposes.
GB 5723-1993 Determination of dimensions of test specimens and articles for vulcanized rubber or thermoplastic rubber
GB/T 5455-2014(英文版) "Textiles—Burning behaviour—Determination of damaged length,afterglow time and afterflame time of vertically oriented specimens"
GB/T 17934.2-1999 Graphic technology-Process control for the manufacture of halftone colour separations,proof and production prints-Part 2: Offset lithographic processes

RU-GOST R, gel sample

GOST 27109-1986 Synthetic rubbers. The methods of sampling and sample preparation
GOST 24920-1981 Latexes synthetic. Acceptance rules, sampling and sample preparation
GOST 28588.2-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 2. Chemical tests
GOST 28588.1-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 1. Physical tests
GOST 16493-1970 Product quality. Acceptance statistical inspection by attributes when the acceptable number of defectives in sample equals 0
GOST 25699.1-1990 Rubber compounding ingredients. Carbon black shipment sampling procedures
GOST R 56056-2014 Procedure for definition of representative sample at certification of management systems of the organizations with multiple sites
GOST 26324-1984 Canned fruit pulp. Sample desulphurization for organoleptic tests
GOST ISO 4656-2013 Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
GOST R 54766-2011 Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 2. Offset lithographic processes

PT-IPQ, gel sample

RO-ASRO, gel sample

STAS 4030/2-1971 VULCANIZED RUBBER Determination of tear strength of small specimens (Delft specimens)
STAS 2149-1983 VULCANIZED RIBBER Specimens preparation for physical, mechanical and chimical analysis

UY-UNIT, gel sample

NORMA 36-P-1947

Japanese Industrial Standards Committee (JISC), gel sample

JIS K 6225:1998 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests
JIS K 6225 AMD 1:2023 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests (Amendment 1)

NL-NEN, gel sample

NEN 3744-1993 Jellified and viscous milk products. Sampling

国家市场监督管理总局、中国国家标准化管理委员会, gel sample

GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece

ES-AENOR, gel sample

CEN - European Committee for Standardization, gel sample

EN ISO 17709:2018 Footwear - Sampling location@ preparation and duration of conditioning of samples and test pieces
PREN 13880-6-2017 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing

Association Francaise de Normalisation, gel sample

NF EN ISO 17709:2018 Chaussures - Localisation de l'échantillonnage, préparation et durée de conditionnement des échantillons et éprouvettes
NF G62-800:2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces.
NF G62-126*NF EN ISO 17709:2018 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
NF M07-077-2:1997 Produits pétroliers liquides - Échantillonnage de carburant au pistolet de distribution - Partie 2 : échantillonnage de grand volume, à un instant donné.
NF T46-048:1984 Rubber vulcanized or thermoplastic. Determination of dimensions of test pieces and products for test purposes.
NF T60-166:1994 Produits de protection temporaire contre la corrosion - Méthode de préparation des éprouvettes métalliques pour évaluation des propriétés des produits de protection
NF EN ISO 9773/A1:2004 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage - Amendement 1 : éprouvettes
NF EN ISO 18314-4:2021 Analyse colorimétrique - Partie 4 : indice de metamérisme de paires d'échantillon pour changement d'illuminant
NF P98-880-6*NF EN 13880-6:2019 Hot applied joint sealants - Part 6 : method for the preparation of samples for testing
NF ISO 23529:2017 Caoutchouc - Procédures générales pour la préparation et le conditionnement des éprouvettes pour les méthodes d'essais physiques
NF P98-880-6:2004 Hot applied joint sealants - Part 6 : test method for the preparation of samples for testing.
NF T51-512*NF EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.
NF G07-134:1984 Textiles. Testing of fabrics. Determination of resistance to fraying during washing using test pieces with different types of seams.
NF ISO 4656:2012 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de l'indice d'absorption d'huile (OAN) et de l'indice d'absorption d'huile d'échantillons comprimés (COAN)
NF T51-429*NF EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus
NF P94-078:1997 Sols : reconnaissance et essais - Indice CBR après immersion. Indice CBR immédiat. Indice Portant Immédiat - Mesure sur échantillon compacté dans le moule CBR.
NF T51-358*NF EN ISO 1600:1999 Plastics. Cellulose acetate. Determination of light absorption on moulded specimens produced using different periods of heating.
NF EN ISO 1600:1999 Plastiques - Acétate de cellulose - Détermination de l'absorption de lumière sur éprouvettes moulées produites en utilisant différentes périodes de chauffage.
NF T56-123:1974 Cellular products of elastomer or plastics. Determination of water absorption of cellular materials over a given period of time.
NF EN ISO 9773:1998 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage
NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF T45-122*NF ISO 4656:2012 Rubber compounding ingredients - Carbon black - Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
NF B57-031:1972 Corkwood in planks. Virgin cork. Ramassage. Gleanings. Corkwood refuse and corkwaste. Sampling.
NF T76-400*NF EN 1719:1999 Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of loop tack.
NF ISO 34-1:2022 Caoutchouc vulcanisé ou thermoplastique - Détermination de la résistance au déchirement - Partie 1 : Eprouvettes pantalon, angulaire et croissant
NF EN ISO 7784-2:2023 Peintures et vernis - Détermination de la résistance à l'abrasion - Partie 2 : méthode utilisant des roues abrasives en caoutchouc et une éprouvette rotative
NF G07-129-1*NF EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1 : determination of maximum force and elongation at maximum force using the strip method

ZA-SANS, gel sample

SANS 5867:1976 Preparation of samples of vulcanized rubbers for testing
SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
SANS 5867:2008 Preparation of samples of vulcanized rubbers for testing
SANS 5616:2001 Preparation of samples (leather, elastomeric material and other footwear materials)
SANS 10183-4-5:2009 Adhesives for wood Part 4-5: Test methods - Static load test of multiple bondline specimens in compression shear

AENOR, gel sample

UNE 40398:1984 METAMERIM INDEX OF SAMPLES COUPLES WHEN THE ILLUMINENT CHANGE
UNE-EN 13400:2002 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces.
UNE-EN 13880-6:2006 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
UNE 53551-2:1991 RUBBER VULCANIZED. PREPARATION OF SAMPLES AND TEST PIECES. PART 2: CHEMICAL TESTS

BE-NBN, gel sample

NBN T 31-037-1988 Rubber, vulcanized - Preparation of samples and test pieces for physical tests
NBN T 31-043-1988 Rubber, vulcanized - Prearation of samples and test piees for chemical tests
NBN T 31-036-1980 Rubber, vulcanized - Determination of dimensions of test pieces and products for test purposes

Danish Standards Foundation, gel sample

DS/EN 13400/AC:2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
DS/EN 13400:2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
DS/EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DS/EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating

Lithuanian Standards Office , gel sample

LST EN 13400-2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
LST EN 13400-2002/AC-2005 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
LST EN 13880-6-2004 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
LST EN ISO 1600:2000 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990)

Indonesia Standards, gel sample

SNI ISO 17709:2011 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
SNI 06-0469-1989 First inspection and sample preparation of paint, lacquer, varnishes and the likes
SNI 06-0466-1989 Preparation of glass based metal sheet for test of paint, lacquer, varnishes and the likes
SNI 03-6838-2002 Manual for test specimen preparation - compaction of asphalt mixture sample using a gyratory compactor

German Institute for Standardization, gel sample

DIN EN ISO 17709:2018-12 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004); German version EN ISO 17709:2018
DIN 53598-1:1983 Statistical evaluation at off-hand samples with examples from testing of rubbers and plastics
DIN EN ISO 17709:2018 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)
DIN 53281:2006 Testing of adhesively bonded joints - Preparation of test specimens
DIN 53534:2000 Testing of rubber - Determination of linear dimensions of test pieces and products
DIN EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN EN ISO 18314-4:2021-09 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020); German version EN ISO 18314-4:2021 / Note: To be replaced by DIN EN ISO 18314-4 (2023-02).
DIN 54459:2011 Structural adhesives - Testing of adhesively bonded joints - Preparation of samples for shear tensile tests from coil coated steel sheets
DIN EN 13880-6:2004 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
DIN EN ISO 18314-4:2023-02 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO/DIS 18314-4:2022); German and English version prEN ISO 18314-4:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 18314-4 (20...
DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).
DIN EN ISO 105-J05:2007-07 Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) (ISO 105-J05:2007); German version EN ISO 105-J05:2007
DIN EN ISO 1600:2000-05 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999
DIN ISO 2889 Bb.3:2015 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities; Supplement 3: Estimation of aerosol particle penetration and depositional losses in sample lines
DIN EN ISO 7932:2005 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of presumptive Bacillus cereus - Colony-count technique at 30 °C (ISO 7932:2004); German version EN ISO 7932:2004

ES-UNE, gel sample

UNE-EN ISO 17709:2019 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)
UNE-EN ISO 18314-4:2022 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020)

VN-TCVN, gel sample

TCVN 4855-2008 Rubber, vulcanized.Preparation of samples and test pieces.Chemical tests

American Society for Testing and Materials (ASTM), gel sample

ASTM D1485-86(1997)e1 Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
ASTM D1485-07(2015) Standard Practice for Rubber from Natural Sources&x2014;Sampling and Sample Preparation
ASTM D1485-07(2020) Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
ASTM D7278-06 Standard Guide for Prediction of Analyzer Sample System Lag Times
ASTM D7278-21 Standard Guide for Prediction of Analyzer Sample System Lag Times
ASTM E423-71(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E423-71(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D1485-07 Standard Practice for Rubber from Natural Sources8212;Sampling and Sample Preparation
ASTM D1485-86(2002) Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
ASTM D4841-88(2003) Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D1879-06(2014) Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D1879-06 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM D1879-99 Standard Practice for Exposure of Adhesive Specimens to High-Energy Radiation
ASTM D187-94(1999) Standard Test Method for Burning Quality of Kerosine
ASTM D4896-01 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4896-95 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4896-01(2008)e1 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4841-88(2008) Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D2095-96(2002) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D2095-96(2008) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D7247-07 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D7247-07a Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D7247-07ae1 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D6463/D6463M-06 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D6463/D6463M-06(2012) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D2664-95a Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM D6301-13 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
ASTM E1741-00 Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
ASTM D5166-97 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5166-97(2003) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5166-97(2008) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5166-97(2008)e1 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5166-97(2016) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D3983-98 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D3983-98(2004) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

IN-BIS, gel sample

HU-MSZT, gel sample

MSZ KGST 803-1977

European Committee for Standardization (CEN), gel sample

EN 1067:2005 Adhesives - Examination and preparation of samples for testing
EN 1067:1997 Adhesives - Examination and Preparation of Samples for Testing
EN 13400:2001 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
prEN 668-1992 Rubber floor coverings; determination of abrasion resistance using a rotating cylindrical drum device and non-rotating sample holder

KR-KS, gel sample

KS M ISO 4661-2-2020 Rubber, vulcanized — Preparation of samples and test pieces —Part 2: Chemical tests
KS M ISO 4648-2007 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
KS M ISO 4656-2017 Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
KS K ISO 105-J05-2018(2023) Textiles — Tests for colour fastness — Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant(CMCCON02)
KS X ISO 12647-2-2021 Graphic technology — Process control for the production of halftone colour separations, proof and production prints —Part 2: Offset lithographic processes

Military Standards (MIL-STD), gel sample

DOD A-A-50978-1985 TUBE, BIOLOGICAL CULTURE SAMPLING, PLEDGET STYLE, WITH TRANSPORT MEDIA, PLASTIC

IT-UNI, gel sample

American National Standards Institute （ANSI), gel sample

ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

Professional Standard - Water Conservancy, gel sample

SL 391.7-2007 Sample preparation methods for organic analysis.Part 7:Silica gel cleanup

Group Standards of the People's Republic of China, gel sample

T/CAQI 159-2020 Sampling and Real-time RT-PCR assay for detection of SARS-CoV-2 in food and food packaging surface

TH-TISI, gel sample

TIS 1709-1998 Rubber compounding ingredients.carbon black.preparation of samples for determination of dibutylphthalate absorption number (compressed sample)
TIS 2260.2-2006 Graphic technology.process control for the production of half.tone colour separations, proof and production prints.part 2: offset lithographic processes

Professional Standard - Commodity Inspection, gel sample

SN/T 3932-2014 Rapid detection of Bacillus Cereus for export foods.Real-time PCR method

Canadian General Standards Board （CGSB), gel sample

CAN/CGSB-4.2 NO.9.2-M90-1990 Textile test methods Breaking strength of fabrics - Grab method - Constant-time-to-break principle

The American Road & Transportation Builders Association, gel sample

AASHTO T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements

未注明发布机构, gel sample

BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source

Professional Standard - Chemical Industry, gel sample

HG/T 3066-2008 Rubber compounding ingredients.Silica, precipitated, hydrated.Determination of loss on ignition on dried sample
HG/T 3066-1999 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of loss on ignition on dried sample
HG/T 3062-1999 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of silica content on drid sample
HG/T 3062-2008 Rubber compounding ingredients.Silica, precipitated, hydrated.Determination of silica content on dried sample

Sichuan Provincial Standard of the People's Republic of China, gel sample

DB51/T 2111-2016 Simultaneous Determination of Hydride Generation in Ecogeochemical Evaluation of Arsenic and Mercury in Soil Samples—Atomic Fluorescence Spectrometry

Standard Association of Australia （SAA）, gel sample

AS ISO 12647.2:2008

GOSTR, gel sample

GOST ISO 1827-2019 Rubber and thermoplastics. Determination of shear modulus and adhesion to rigid plates. Four-element sample shear methods