ZH
RU
ES
plastic test
plastic test, Total:199 items.
In the international standard classification, plastic test involves: Plastics, Wastes, Pipeline components and pipelines, Reinforced plastics, Medical equipment, Rubber and plastics products, Equipment for the rubber and plastics industries, Materials for aerospace construction, Protection against fire, Welding, brazing and soldering, Cellular materials, Raw materials for rubber and plastics, Road vehicle systems, Surface treatment and coating.
International Organization for Standardization (ISO), plastic test
German Institute for Standardization, plastic test
- DIN EN ISO 20753:2022-07 Plastics - Test specimens (ISO/DIS 20753:2022); German and English version prEN ISO 20753:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN EN ISO 20753 (2019-02).
- DIN EN ISO 20753:2019-02 Plastics - Test specimens (ISO 20753:2018); German version EN ISO 20753:2018 / Note: To be replaced by DIN EN ISO 20753 (2022-07).
- DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
- DIN EN ISO 16012:2016-02 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015); German version EN ISO 16012:2015
- DIN 16726:2017 Plastic sheets - Testing
- DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
- DIN 53380-2:2006-11 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
- DIN 53435:2018-09 Testing of plastics - Bending test and impact test on dynstat test specimens
- DIN 53408:1967-06 Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers
- DIN EN ISO 4612:2019 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:2018)
- DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN EN 2489:1995-11 Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995
- DIN 53380-3:1998-07 Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
- DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN 16726:2017-08 Plastic sheets - Testing
- DIN EN ISO 4612:1999 Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999
- DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
- DIN 53497:2017-04 Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
- DIN 53380-5:2014-12 Testing of plastics - Determination of gas transmission rate - Part 5: Optical method for plastic films and moulded plastic parts
- DIN EN 2743:2003 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
- DIN EN 2377:1989-10 Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989
- DIN EN 2743:2003-06 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
- DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
- DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
- DIN 54802-2:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method
- DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN 53380-4:2006-11 Testing of plastics - Determination of gas transmission rate - Part 4: Carbon dioxide specific infrared absorption method for testing of plastic films and plastic mouldings
British Standards Institution (BSI), plastic test
- 22/30449570 DC Plastics. Test specimens
- BS EN ISO 20753:2018 Tracked Changes. Plastics. Test specimens
- BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
- BS 2782-10 Method 1003:1977 Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties
- BS 2782-10 Method 1004:1977 Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
- BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
- BS 2782-3 Method 323C:1996 Methods of testing plastics. Mechanical properties. Shear vibration. Non-resonance method
- BS 2782-3 Method 323D:1996 Methods of testing plastics. Mechanical properties. Torsional vibration. Non-resonance method
- BS 2782-3 Method 323B:1996 Methods of testing plastics. Mechanical properties. Flexural vibration. Non-resonance method
- BS 2782-7 Method 732D:1999 Methods of testing plastics. Rheological properties. Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers. Method 732D: Determination of the viscosity of polycarbonate (PC)...
- BS 2782-4 Method 470C:1991 Methods of testing plastics. Chemical properties. Determination of ash of unplasticized cellulose acetate
- BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
- BS 2782-6 Method 632A:1993 Methods of testing plastics. Dimensional properties. Determination of length and width of flexible sheet
- BS 2782-1 Method 153A:1991 Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (general method)
- BS 2782-4 Method 451A:1978 Methods of testing plastics. Chemical properties. Determination of acetone-soluble matter in phenolic mouldings
- BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
- BS 2782-1 Method 130A:1991 Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
- BS 2782-6 Method 631A:1993 Methods of testing plastics. Dimensional properties. Determination of gravimetric thickness and yield of flexible sheet
- BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
- BS 2782-4 Method 470B:1999 Methods of testing plastics. Chemical properties. Determination of ash of polyalkylene terephthalates
- BS 2782-7 Method 732F:1991 Methods of testing plastics. Rheological properties. Determination of viscosity number of methyl methacrylate polymers
- BS 2782-6 Method 630A:1994 Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible sheet
- BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
- BS EN 6038:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact
- BS EN 6032:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of the glass transition temperatures
- BS 2782-1 Method 153B:1991 Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds)
- BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
- 22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
- BS 2782-4 Method 433A:1979 Methods of testing plastics. Chemical properties. Determination of inorganic chlorine in epoxide resins and glycidyl esters
- BS 2782-11 Method 1121H:1996 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
- BS 2782-1 Method 140D:1997 Methods of testing plastics. Thermal properties. Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
- BS ISO 5893:2019+A1:2020 Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
- BS 2782-11 Method 1121C:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
- BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
- BS 2782-4 Method 454G:1996 Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross particle and coagulum content)
- BS 2782-1 Method 140E:1982 Methods of testing plastics. Thermal properties. Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method)
- BS EN ISO 294-2:2018 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
- BS 2782-7 Method 740B:1996 Methods of testing plastics. Rheological properties. Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test
- BS EN 6036:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of notched, unnotched and filled hole compression strength
- BS 2782-1 Method 140A:1992 Methods of testing plastics. Thermal properties. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
- BS 2782-5 Method 540G:1995 Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources. Open flame carbon-arc lamps
- 20/30411276 DC BS ISO 5893 AMD1. Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
- BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
ES-UNE, plastic test
- UNE-EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
- UNE-CEN/TS 16010:2022 EX:2022 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- UNE-EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
- UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- UNE-EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures (Endorsed by AENOR in January of 2016.)
- UNE-EN 2743:2001 Aerospace series- Fibre reinforced plastics- Standard procedures for conditioning prior to testing unaged materials. (Endorsed by AENOR in February of 2002.)
- UNE-EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test) (Endorsed by AENOR in January of 2016.)
- UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
WRC - Welding Research Council, plastic test
- BULLETIN 164-1971 PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS; PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS
SE-SIS, plastic test
CZ-CSN, plastic test
- CSN 64 0201-1990 Plastics tests. Sampling
- CSN 64 0526-1995 Testing of plastics. Determination of Thermal Conductivity
- CSN 64 0808-1988 Testing of plastics. Determination of prooessing reversion and post-revcrsion of moulding thermo- plastics
- CSN 64 0246-1981 Testing of plastics. ualitative evaluation of he bleeding of colorants
- CSN 64 0810-1983 Testing ol plastics. Dctermination moulding properties of thermosetingresins on the plastometer KK
- CSN 64 0753-1981 Testing of plastics. Determination of emperature of deflection under load ording to ISO 75
- CSN 64 0146-1984 Testing of plastics eat stability and fiie-resistance during he hot mandrel test
- CSN 64 0244-1981 Testing of piastics. etermination migration f plasticizers
- CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests
- CSN 64 0321-1963 Testing of polystyrene hermoplastics
- CSN 64 0618-1975 Plastics testing. Method of test for fatigue of plastics
- CSN 64 0751-1981 Testing of plastics. Determination of hermal stability of póly (vinylchloride) nd of its mixtures by the continuous otentiometric method
- CSN 64 0207 Za-1983
Association Francaise de Normalisation, plastic test
- XP CEN/TS 16010:2013 Plastiques - Plastiques recyclés - Procédures d'échantillonnage pour l'essai des déchets de plastiques et des recyclats
- XP T50-809*XP CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- FD T57-001*FD ISO/TR 13883:1995 Plastics. Guide to the writing of test methods.
- NF EN 2489:1996 Série aérospatiale - Plastiques renforcés de fibres - Détermination de l'action des fluides d'essais
- NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
- NF ISO 1268-7:2002 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 7 : moulage par transfert de résine
- NF ISO 1268-5:2002 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 5 : moulage par enroulement filamentaire
- NF ISO 1268-2:2002 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 2 : moulage au contact et par projection
- NF ISO 5893:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications
- NF EN 2377:1989 Série aérospatiale - Plastiques renforcés de fibres de verre - Méthode d'essai : détermination des propriétés en cisaillement apparent interlaminaire.
- NF ISO 5893/A1:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications - AMENDEMENT 1
- FD ISO/TR 13883:1995 Plastiques - Guide pour la rédaction des méthodes d'essai.
Danish Standards Foundation, plastic test
- DS/CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
- DS/ISO 10093:2020 Plastics – Fire tests – Standard ignition sources
AT-ON, plastic test
- ONR CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
- ONORM A 5493-1982 Packaging testing; drop test on plastic Containers
IT-UNI, plastic test
- UNI CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
Lithuanian Standards Office , plastic test
- LST CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- LST EN ISO 11468:2000 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997)
European Committee for Standardization (CEN), plastic test
- PD CEN/TS 16010:2020 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures
- EN 2743:2001 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
- EN ISO 4612:1999 Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method ISO 4612:1999
- EN 6038:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact
- EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)
- EN 6035:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength
- EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
- EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- EN 6036:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched@ unnotched and filled hole compression strength
AENOR, plastic test
- UNE-CEN/TS 16010:2015 EX Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- UNE-EN 2489:1996 AEROSPACE SERIES. FIBRE REINFORCED PLASTICS. DETERMINATION OF THE ACTION OF TEST FLUIDS.
- UNE 135205:2014 Road signalisation equipment. Horizontal signalisation. Thermoplastics. Test methods. Determination of density thermoplastic materials cold.
- UNE-EN 2377:1993 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTIC. TEST METHOD. DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH.
Korean Agency for Technology and Standards (KATS), plastic test
VE-FONDONORMA, plastic test
未注明发布机构, plastic test
- BS EN 2489:1995(1999) Fibre reinforced plastics — Determination of the action of test fluids
- BS 2782-10-Method 1002:1977(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1002 : Determination of loss on ignition
- BS 2782-10-Method 1003:1977(1999) EN 61 Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1003 : Determination of tensile properties
- BS 2782-8-Method 820A:1996(1998) Methods of testing Plastics — Part 8 : Other properties — Method 820A : Determination of water vapour transmission rate (dish method)
- BS ISO 4433-2:1997(1999)*BS 2782-11 Method 1161B:1998 Methods of testing plastics : Part 11 : Thermoplastics pipes, fittings and valves, as Method 1161B, for association with related test methods for plastics materials and plastics piping components .
- BS 2782-4-Method 452B:1993 Methods of testing Plastics Part 4 . Chemical properties Method 452B.Determination of carbon black content of polyolefin compound
- BS 2782-11-method 1108A:1989(1999) Methods of testing P l a s t i c s — Part 11 : Thermoplastics pipes, fittings and valves — Method 1108A : True impact rate (TIR) boundaries of pipes
- BS 2782-10-Method 1008C:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008C : Determination of compressive strength on rods made from roving - reinforced resins
- BS 2782-10-Method 1008B:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008B : Determination of flexural strength on rods made of roving - reinforced resin
- BS 2782-3-Methods 352F:1996 Methods of testing plastics Part 3 . Mechanical properties Method 352F.Determination of impact resistance by the free - falling dart method (instrumented puncture test)
- BS 2782-10-Method 1008D:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008D : Determination of apparent interlaminar shear strength on rods made of roving - reinforced resins
- BS 2782-6-method 643A:1976(1999) Methods of testing Plastics — Part 6 : Dimensional properties — Method 643A : Shrinkage on heating of film intended for shrink wrapping applications
IN-BIS, plastic test
ZA-SANS, plastic test
- SANS 5591:1975 Preparation of samples and extracts used in testing plastics for medical use
- SANS 5893:2003 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
RU-GOST R, plastic test
- GOST 14359-1969 Plastics. Testing methods. General requirements of the methods of mechanical testing
BR-ABNT, plastic test
GM Daewoo, plastic test
- GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)
CEN - European Committee for Standardization, plastic test
- EN ISO 4612:2018 Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, plastic test
- PREN 2743-1991 Aerospace Series Reinforced Plastics Standard Procedures for Conditioning Prior to Testing (Issue P 1)
- PREN 6031-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of in-Plane Shear Properties (+/- 45 Degree Tensile Test) (Edition P1)
TR-TSE, plastic test
- TS 2293-1976 P L A STIC S METHOD OF TEST FOR HIGH - VOLTAGE - LOW CURRENT DRY ARC RESISTANCE OF SOLID ELECTRICAL INSULATION
European Association of Aerospace Industries, plastic test
- AECMA PREN 6066-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Tensile Strength of a Tapered and Stepped Joints Edition P1
Group Standards of the People's Republic of China, plastic test
- T/CSRA 20-2022 Quantitative analysis method for degradable plastics in plastic composition test
- T/CSRA 19-2022 Plastic composition test pretreatment method
CU-NC, plastic test
IL-SII, plastic test
国家市场监督管理总局、中国国家标准化管理委员会, plastic test
- GB/T 40564-2021 Test method of epoxy molding compound for electronic packaging
FI-SFS, plastic test
Association of German Mechanical Engineers, plastic test
CH-SNV, plastic test
CY-CYS, plastic test
- CYS 145 Pt.6 Method 601-1984 CYPRUS STANDARD METHOD OF TESTING PLASTICS Part 6: Rheological Properties METHOD 601: DETERMINATION OF MELT PLOW RATE OF THERMOPLASTICS
Standard Association of Australia （SAA）, plastic test
- AS 2498.8:1991 Methods of testing rigid cellular plastics - Determination of water absorption
- AS 2498.1:1993 Methods of testing rigid cellular plastics - Sampling and conditioning
- AS 2498.2:1993 Methods of testing rigid cellular plastics - Determination of linear dimensions
- AS 2498.3:1993 Methods of testing rigid cellular plastics - Determination of compressive stress
- AS 2498.4:1993 Methods of testing rigid cellular plastics - Determination of cross-breaking strength
RO-ASRO, plastic test
- STAS 5794-1980 PLASTICS staudard atnlospheres for conditioning and testing
Society of Automotive Engineers (SAE), plastic test
SAE - SAE International, plastic test
PL-PKN, plastic test
KR-KS, plastic test