ZH

RU

ES

Infrared spectrum analysis peak

Infrared spectrum analysis peak, Total:305 items.

In the international standard classification, Infrared spectrum analysis peak involves: Analytical chemistry, Protection against fire, Lubricants, industrial oils and related products, Rubber, Products of the textile industry, Electrical wires and cables, Reinforced plastics, Optics and optical measurements, Fuels, Water quality, Standardization. General rules, Insulating fluids, Medical sciences and health care facilities in general, Semiconducting materials, Materials for aerospace construction, Power stations in general, Paints and varnishes, Paint ingredients, Optoelectronics. Laser equipment, Semiconductor devices, Seals, glands, Shafts and couplings, Beverages, Cereals, pulses and derived products, Soil quality. Pedology, Plastics, Metalliferous minerals, Petroleum products in general, Air quality, Non-ferrous metals, Geology. Meteorology. Hydrology, Wastes, Rubber and plastics products, Education, Tea. Coffee. Cocoa, Natural gas, Products of non-ferrous metals, Information sciences. Publishing, Metrology and measurement in general, Protection against crime, Edible oils and fats. Oilseeds, Pharmaceutics, Products of the chemical industry, Burners. Boilers, Terminology (principles and coordination), Waxes, bituminous materials and other petroleum products, Nuclear energy engineering, Animal feeding stuffs, Milk and milk products, Medical equipment, Testing of metals, Acoustics and acoustic measurements, Road engineering, Optical equipment.


国家市场监督管理总局、中国国家标准化管理委员会, Infrared spectrum analysis peak

  • GB/T 6040-2019 General rules for infrared analysis
  • GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
  • GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
  • GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • GB/T 23801-2021 Determination of fatty acid methyl ester (FAME) content in middle distillates—Infrared spectrometry
  • GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
  • GB/T 37396.2-2019 Lasers and laser-related equipment—Standard optical components—Part 2: Components for the infrared spectral ranges
  • GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared spectrum analysis peak

  • GB/T 6040-2002 General rules for infrared analysis
  • GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
  • GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
  • GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
  • GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
  • GB/T 18294.6-2012 Technical indentification methods for fire.Part 6:Infrared spectroscopy analysis
  • GB/T 24369.1-2009 Characterization of gold nanorods.Part 1:UV-Vis-NIR absorption spectroscopy
  • GB/T 23801-2009 Determination of fatty acid methyl esters(FAME) in middle distillates by infrared spectroscopy method
  • GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
  • GB/T 19267.1-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 1:Infrared absorption spectrometry
  • GB/T 19267.1-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 1: Infrared absorption spectrometry
  • GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
  • GB/T 7602.3-2008 Determination of T501 oxidation inhibitor content in transformer oil or turbine oil Part 3:Infrared spectroscopy method
  • GB/T 8570.6-2010 Determination of liquefied anhydrous ammonia.Part 6:Oil content.Gravimetric and infra-red methods

Professional Standard - Commodity Inspection, Infrared spectrum analysis peak

  • SN/T 3914-2014 General rules for infrared spectrometer in minerals
  • SN/T 2763.2-2012 Chemical analysis of laterite nickel ore.Part 2:Determination of nickel and cobalt content.Flame atomic absorption spectrometry

American Society for Testing and Materials (ASTM), Infrared spectrum analysis peak

  • ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
  • ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM UOP841-83 Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy
  • ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
  • ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
  • ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E2412-23 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
  • ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM E2412-10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM C1441-99 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM E1944-98(2002) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1944-98 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E2412-04 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7844-21 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E2310-04(2009) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy

RU-GOST R, Infrared spectrum analysis peak

  • GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
  • GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
  • GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
  • GOST R ISO 19087-2021 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
  • GOST R EN 14078-2010 Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates by infrared spectroscopy method

German Institute for Standardization, Infrared spectrum analysis peak

  • DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
  • DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
  • DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
  • DIN EN 6042:2021-08 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy; German and English version prEN 6042:2021 / Note: Date of issue 2021-07-16
  • DIN 55673:2000 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
  • DIN 55673:2017 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
  • DIN 55673:2017-04 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
  • DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
  • DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN ISO 11151-2:2015-12 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN 10478:2003 Determination of ingredients of raw milk using infra-red spectrophotometry - Function test of the instruments
  • DIN EN ISO 13884:2005-11 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry (ISO 13884:2003); German version EN ISO 13884:2005
  • DIN EN 15948:2020-12 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels; German version EN 15948:2020
  • DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN 51451:2023-10 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles / Note: Date of issue 2023-08-25*Intended as replacement for DIN 51451 (2020-02).
  • DIN EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry English version of DIN EN 15058:2006-09
  • DIN EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015

(U.S.) Ford Automotive Standards, Infrared spectrum analysis peak

Professional Standard - Forestry, Infrared spectrum analysis peak

  • LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
  • LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Association Francaise de Normalisation, Infrared spectrum analysis peak

  • NF T46-054*NF ISO 4650:2013 Rubber - Identification - Infrared spectrometric methods
  • NF ISO 19702:2016 Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF)
  • NF EN 1767:1999 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Analyse par spectrométrie infrarouge
  • NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
  • NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
  • NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
  • NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
  • NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
  • NF EN ISO 11151-2:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2 : composants pour la plage spectrale infrarouge
  • NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
  • NF EN 15948:2020 Céréales - Détermination de la teneur en eau et en protéines - Méthode utilisant la spectroscopie dans le proche infrarouge sur des grains entiers
  • NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
  • NF X70-102*NF ISO 19702:2016 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier transform infrared (FTIR) spectroscopy
  • NF EN ISO 13884:2005 Corps gras d'origines animale et végétale - Détermination, par spectrométrie infrarouge, des isomères trans isolés
  • NF EN 14078:2015 Produits pétroliers liquides - Détermination de la teneur en esters méthyliques d'acides gras (EMAG) des distillats moyens - Méthode par spectrométrie infrarouge

Professional Standard - Textile, Infrared spectrum analysis peak

  • FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers
  • FZ/T 01057.8-2012 Test method for identification of textile fibers.Part 8: Infrared absorption spectrum

Liaoning Provincial Standard of the People's Republic of China, Infrared spectrum analysis peak

  • DB21/T 2079-2013 Polyvinyl chloride (PVC) cable material analysis - infrared spectroscopy

Korean Agency for Technology and Standards (KATS), Infrared spectrum analysis peak

  • KS M 0024-2017 General rules for infrared spectrophotometric analysis
  • KS M 0024-1987 General rules for infrared spectrophotometric analysis
  • KS M 0024-2017(2022) General rules for infrared spectrophotometric analysis
  • KS M 0024-1997 General rules for infrared spectrophotometric analysis
  • KS I ISO 4224:2006 Ambient air-Determination of carbon monoxide-Non-dispersive infrared spectrometry method
  • KS B ISO 11151-2:2003 Lasers and laser-related equipment-Standard optical components-Part 2:Components for the infrared spectral range
  • KS B ISO 11151-2:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 2: Components for the infrared spectral range
  • KS B ISO 11151-2:2015 Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-2-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS I ISO 4224:2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method

Japanese Industrial Standards Committee (JISC), Infrared spectrum analysis peak

Group Standards of the People's Republic of China, Infrared spectrum analysis peak

  • T/CPCIF 0185-2022 Rapid analysis method of automobile diesel fuels— Near infrared spectrometry
  • T/CPCIF 0184-2022 Rapid analysis method of motor vehicle gasoline— Near infrared spectrometry
  • T/CPCIF 0186-2022 Rapid analysis method of motor vehicle ethanol gasoline(E10)— Near infrared spectrometry
  • T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis
  • T/CIS 11005-2023 Real-time determination of the start point and end point of column chromatography elution in traditional Chinese medicine production process —Near infrared spectroscopy
  • T/CPCIF 0187-2022 Rapid analysis method of diesel engines NOx reduction agent- aqueous urea solution(AUS 32)—Near infrared spectrometry
  • T/YNBX 108-2023 Rapid determination of main quality components in Pu-erh ripe tea - near infrared spectroscopy
  • T/GZTPA 0005-2020 Determination of the main chemical constituents in Guizhou green tea by Near-infrared diffuse reflectance spectroscopy

AT-ON, Infrared spectrum analysis peak

  • ONORM M 6608-1996 Water analysis - Determination of hydrocarbons by infrared spectrometry
  • OENORM EN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
  • OENORM EN 15948-2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

Professional Standard - Petroleum, Infrared spectrum analysis peak

  • SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil

GOSTR, Infrared spectrum analysis peak

  • GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis
  • GOST EN 14078-2016 Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates by infrared spectroscopy method
  • GOST 34567-2019 Meat and meat products. Method for determination of moisture, fat, protein, sodium chloride and ash using near infrared spectroscopy

国家能源局, Infrared spectrum analysis peak

  • SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks
  • SY/T 7657.3-2021 Part 3 of the combined photoacoustic spectroscopy-infrared spectroscopy-fuel cell determination method for natural gas: Determination of the content of ethane and above alkanes, carbon dioxide and carbon monoxide by infrared spectroscopy
  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)
  • SY/T 7657.1-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 1: General principles
  • SY/T 7657.2-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 2: Determination of methane content by photoacoustic spectroscopy
  • SH/T 0935-2016 Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the sulfonation state of petroleum-based and hydrocarbon-based lubricants in use
  • SH/T 0931-2016 Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the oxidation state of petroleum-based and hydrocarbon-based lubricants in use
  • NB/SH/T 0998-2019 Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the nitration status of petroleum-based and hydrocarbon-based lubricants in use
  • SY/T 7657.4-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 4: Determination of hydrogen content by fuel cell method

International Organization for Standardization (ISO), Infrared spectrum analysis peak

  • ISO 4650:2005 Rubber - Identification - Infrared spectrometric method
  • ISO 4650:1984 Rubber; Identification; Infra-red spectrometric method
  • ISO 4650:2012 Rubber - Identification - Infrared spectrometric methods
  • ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • ISO 19087:2018 Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
  • ISO 4224:2000 Ambient air - Determination of carbon monoxide - Non-dispersive infrared spectrometry method
  • ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO/DIS 19702:2023 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
  • ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
  • ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO/CD 19702 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
  • ISO 23506:2021 Workplace air - Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier - Transform infrared spectroscopy
  • ISO 23468:2021 Reactor technology - Power reactor analyses and measurements - Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy
  • ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
  • ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
  • ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles - Part 4: Spectral analysis of surface profiles
  • ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO/CD 8237-1 Optical materials and components — Specification of chalcogenide glass used in the infrared spectrum — Part 1: Definitions and general

British Standards Institution (BSI), Infrared spectrum analysis peak

  • BS ISO 4650:2006 Rubber - Identification - Infrared spectrometric method
  • BS ISO 4650:2012 Rubber. Identification. Infrared spectrometric methods
  • BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
  • DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
  • 21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
  • 18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
  • BS ISO 19087:2018 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
  • BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
  • BS EN 15948:2012 Cereals. Determination of moisture and protein. Method using Near-Infrared- Spectroscopy in whole kernels
  • BS EN 15948:2015 Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
  • BS ISO 23506:2021 Workplace air. Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier. Transform infrared spectroscopy
  • BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
  • BS ISO 23468:2021 Reactor technology. Power reactor analyses and measurements. Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy
  • BS EN ISO 13884:2005 Animal and vegetable fats and oils. Determination of isolated trans isomers by infrared spectrometry
  • 20/30381924 DC BS ISO 23506. Workplace Air. Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier. Transform Infrared Spectroscopy
  • BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
  • BS EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry

Taiwan Provincial Standard of the People's Republic of China, Infrared spectrum analysis peak

  • CNS 13105-1992 General Rules for Infrared Spectrophotometric Analysis
  • CNS 15057-2007 Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method

Professional Standard - Agriculture, Infrared spectrum analysis peak

Professional Standard - Electron, Infrared spectrum analysis peak

  • SJ 20744-1999 General rule of infrared absorption spectral analysis for the impurity concentration in semiconductor materials
  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
  • SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth

European Committee for Standardization (CEN), Infrared spectrum analysis peak

  • prEN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
  • EN ISO 11151-2:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Range ISO 11151-2: 2000
  • EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
  • EN 15948:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
  • EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Infrared spectrum analysis peak

  • PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

NL-NEN, Infrared spectrum analysis peak

  • NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

NO-SN, Infrared spectrum analysis peak

  • NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method
  • NS 9804-1993 Water analysis. Determination of fat in wastewater from food processing industries. Infrared spectrophotometric method

Professional Standard - Electricity, Infrared spectrum analysis peak

  • DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method
  • DL/T 1607-2016 Measurement of sulfur hexafluoride decomposition using infrared spectroscopy method

SE-SIS, Infrared spectrum analysis peak

BE-NBN, Infrared spectrum analysis peak

  • NBN T 91-502-1977 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry
  • NBN T 91-501-1975 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry

European Association of Aerospace Industries, Infrared spectrum analysis peak

  • AECMA PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy Edition P1

Professional Standard - Non-ferrous Metal, Infrared spectrum analysis peak

  • YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
  • YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method
  • YS/T 820.18-2012 Methods for chemical analysis of laterite nickel ores.Part 18:Determination of mercury conten.Cold atomic absorption spectrometry
  • YS/T 820.15-2012 Methods for chemical analysis of laterite nickel ores.Part 15:Determination of cadmium content.Flame atomic absorption spectrometry
  • YS/T 820.1-2012 Methods for chemical analysis of laterite nickel ores.Part 1:Determination of nikel content.Flame atomic absorption spectrometry
  • YS/T 820.5-2012 Methods for chemical analysis of laterite nickel ores.Part 5:Determination of cobalt content.Flame atomic absorption spectrometry
  • YS/T 820.6-2012 Methods for chemical analysis of laterite nickel ores.Part 6:Determination of copper content.Flame atomic absorption spectrometry
  • YS/T 820.12-2012 Methods for chemical analysis of laterite nickel ores.Part 12:Determination of manganese content.Flame atomic absorption spectrometry
  • YS/T 820.13-2012 Methods for chemical analysis of laterite nickel ores.Part 13:Determination of lead content.Flame atomic absorption spectrometry
  • YS/T 820.14-2012 Methods for chemical analysis of laterite nickel ores.Part 14:Determination of zinc content.Flame atomic absorption spectrometry
  • YS/T 820.17-2012 Methods for chemical analysis of laterite nickel ores.Part 17:Determination of arsenic,antimony and bismuth contents.Hydride generation-atomic fluorescence spectrometry
  • YS/T 820.7-2012 Methods for chemical analysis of laterite nickel ores.Part 7:Determination of calcium and magnesium content.Flame atomic absorption spectrometry

Aerospace, Security and Defence Industries Association of Europe (ASD), Infrared spectrum analysis peak

  • ASD-STAN PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

国家文物局, Infrared spectrum analysis peak

  • WW/T 0087-2018 Determination of aging degree of silk fabrics in collections using Fourier transform infrared spectroscopic analysis

Professional Standard - Petrochemical Industry, Infrared spectrum analysis peak

  • NB/SH/T 0853-2010 Standard practice for condition monitoring of used lubricants by trend analysis using fourier transform infrared(FT-IR)spectrometry

Professional Standard - Geology, Infrared spectrum analysis peak

  • DZ/T 0279.25-2016 Methods of Analysis of Regional Geochemical Samples Part 25: Combustion for Carbon Determination - Infrared Absorption Spectroscopy

YU-JUS, Infrared spectrum analysis peak

  • JUS G.S1.510-1997 Plastics - Analysis of components in polyvinyl chloride) compounds - Infrared spectrofotometric method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared spectrum analysis peak

  • GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12:Determination of sulfur content—High frequency combustion with infrared absorption method
  • GB/T 17923-2017 Analytical method for oily sewage from marine petroleum development industry—Infrared spectrophotometry

Professional Standard - Education, Infrared spectrum analysis peak

  • JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry

Professional Standard - Energy, Infrared spectrum analysis peak

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)
  • NB/SH/T 0935-2016 Fourier Transform Infrared Spectroscopy (FT-IR) Trend Analysis Method for Monitoring Sulfonation Status of Petroleum- and Hydrocarbon-Based Lubricants
  • NB/SH/T 0931-2016 Fourier Transform Infrared Spectroscopy (FT-IR) Trend Analysis in Oxidation State Monitoring of Petroleum- and Hydrocarbon-Based Lubricants

Danish Standards Foundation, Infrared spectrum analysis peak

  • DS/EN 15948:2020 Cereals – Determination of moisture and protein – Method using Near-Infrared Spectroscopy in whole kernels
  • DS/EN ISO 13884:2005 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry
  • DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • DS/ISO 23506:2021 Workplace air – Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier – Transform infrared spectroscopy
  • DS/EN 14078:2010 Liquid petroleum products - Determination of fatty methyl ester (FAME) content in middle distillates - Infrared spectrometry method
  • DS/EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels

PL-PKN, Infrared spectrum analysis peak

  • PN-EN 15948-2021-03 E Cereals -- Determination of moisture and protein -- Method using Near-Infrared Spectroscopy in whole kernels

Anhui Provincial Standard of the People's Republic of China, Infrared spectrum analysis peak

  • DB34/T 2890-2017 Rapid Determination of Main Quality Components in Tea-Near Infrared Spectroscopy

工业和信息化部, Infrared spectrum analysis peak

  • YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
  • YS/T 1057.5-2022 Methods for chemical analysis of cobalt tetroxide Part 5: Determination of carbon content High-frequency combustion-infrared absorption spectrometry

Professional Standard - Public Safety Standards, Infrared spectrum analysis peak

  • GA/T 823.2-2009 Analysis method for paint fragment.Part 2:Infrared absorption spectrometry

Professional Standard - Meteorology, Infrared spectrum analysis peak

  • QX/T 206-2013 Calculation Method of Performance Index of Satellite Low Spectral Resolution Infrared Instrument

未注明发布机构, Infrared spectrum analysis peak

  • BS EN ISO 13884:2005(2006) Animal and vegetable fats and oils — Determination of isolated trans isomers by infrared spectrometry

VN-TCVN, Infrared spectrum analysis peak

  • TCVN 7725-2007 Ambient air.Determination of carbon monoxide.Non-dispersive infrared spectrometric method
  • TCVN 2617-2008 Liquefied anhydrous ammonia for industrial use.Determination of oil content.Gravimetric and infrared spectrometric methods

KR-KS, Infrared spectrum analysis peak

  • KS I ISO 4224-2021 Ambient air — Determination of carbon monoxide —Non-dispersive infrared spectrometric method

ES-UNE, Infrared spectrum analysis peak

  • UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
  • UNE-EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • UNE-EN 15948:2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

TH-TISI, Infrared spectrum analysis peak

  • TIS 1969-2000 Liquidfied anhydrous amnonia for industrial use.determination of oil content.gravimetric and infra-red spectrometric methods

Jiangxi Provincial Standard of the People's Republic of China, Infrared spectrum analysis peak

  • DB36/T 1127-2019 Rapid Determination of Crude Ash, Calcium, Total Phosphorus and Sodium Chloride in Feed by Near Infrared Spectroscopy

Lithuanian Standards Office , Infrared spectrum analysis peak

  • LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
  • LST EN ISO 11151-2:2002 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
  • LST EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • LST EN ISO 13884:2005 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry (ISO 13884:2003)
  • LST EN 14078-2010 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
  • LST EN 15948-2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
  • LST EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

AENOR, Infrared spectrum analysis peak

  • UNE-EN ISO 13884:2006 Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry (ISO 13884:2003)
  • UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method

中华全国供销合作总社, Infrared spectrum analysis peak

  • GH/T 1259-2019 Near-infrared spectroscopic determination of moisture, tea polyphenols and caffeine content in tea polyphenol products
  • GH/T 1260-2019 Near-infrared spectroscopic determination of moisture, tea polyphenols and caffeine content in solid instant tea

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared spectrum analysis peak

  • GJB 5384.14-2005 Test methods of performance for pyrotechnic composition Part 14: Determination of infrared radiance effective Infrared spectrum distribution method

Standard Association of Australia (SAA), Infrared spectrum analysis peak

  • AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk

Indonesia Standards, Infrared spectrum analysis peak

Yunnan Provincial Standard of the People's Republic of China, Infrared spectrum analysis peak

  • DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

Hainan Provincial Standard of the People's Republic of China, Infrared spectrum analysis peak

  • DB46/T 557-2021 Detection of Non-biodegradable Components in Single-Use Plastic Products by Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry

CH-SNV, Infrared spectrum analysis peak

  • SN EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

IT-UNI, Infrared spectrum analysis peak

  • UNI EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

CEN - European Committee for Standardization, Infrared spectrum analysis peak

  • PREN 15948-2018 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved