ZH
RU
ES

Method Validation for Particulate Matter

Method Validation for Particulate Matter, Total:499 items.

In the international standard classification, Method Validation for Particulate Matter involves: Air quality, Domestic, commercial and industrial heating appliances, Construction materials, Soil quality. Pedology, Agricultural machines, implements and equipment, Rubber and plastics products, Ceramics, Civil engineering in general, Pesticides and other agrochemicals, Elements of buildings, Products of the textile industry, Analytical chemistry, Raw materials for rubber and plastics, Particle size analysis. Sieving, Clothes, Road vehicles in general, Iron and steel products, Fuels, Corrosion of metals, Lubricants, industrial oils and related products, Paint ingredients, Refractories, Fluid power systems, Protective equipment, Products of the chemical industry, Structures of buildings, Optics and optical measurements, Plastics, Water quality, Quality, Medical equipment, Environmental protection, Semiconducting materials, Paints and varnishes, Glass, Road engineering, Construction industry, Earthworks. Excavations. Foundation construction. Underground works, Metalliferous minerals, Inks. Printing inks, Microbiology, Welding, brazing and soldering, Petroleum products in general, Hydraulic fluids, Rubber, Headgear. Clothing accessories. Fastening of clothing, Powder metallurgy, Leather technology, Graphic technology, Waxes, bituminous materials and other petroleum products, Testing of metals, Non-ferrous metals, Mechanical testing, Ventilators. Fans. Air-conditioners, Farming and forestry, Sterilization and disinfection, Installations in buildings.

European Committee for Standardization (CEN), Method Validation for Particulate Matter

EN 12341:1998 Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods
EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 12697-17:2017 Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens
EN ISO 13982-1:2004/A1:2010 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

German Institute for Standardization, Method Validation for Particulate Matter

DIN EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods; German version EN 12341:1998
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN EN ISO 16140-3:2021-06 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021); German version EN ISO 16140-3:2021
DIN ISO 8524:1992 Agricultural machinery and tractors; equipment for distributing granulated crop protection products; test method; identical with ISO 8524:1986
DIN EN ISO 13982-2:2005-03 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004
DIN EN 12697-17:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen; German version EN 12697-17:2004+A1:2007
DIN EN ISO 16140-2:2016-11 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016); German version EN ISO 16140-2:2016

American Society for Testing and Materials (ASTM), Method Validation for Particulate Matter

ASTM D1888-78e1 Methods of Test for Particulate and Dissolved Matter in Water
ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM D4791-05 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-05e1 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-99 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM E1520-23 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-19(2023) Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E728-91(1997) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM E728-91(2015) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM E728-91(2020) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM D6225-98 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D6225-98(2004) Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D6225/D6225M-98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D6225-98e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D6225/D6225M-98(2020) Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
ASTM D3466-06 Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D1508-23 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
ASTM D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM D185-07(2012) Standard Test Methods for Coarse Particles in Pigments
ASTM D185-07(2019) Standard Test Methods for Coarse Particles in Pigments
ASTM D185-07 Standard Test Methods for Coarse Particles in Pigments
ASTM D8120-17 Standard Test Method for Ferrous Debris Quantification
ASTM E726-01(2006) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E726-96 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E726-01 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM D1508-99 Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
ASTM C123/C123M-11 Standard Test Method for Lightweight Particles in Aggregate
ASTM D3466-06(2011) Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D1508-12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM D4600-95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM E2515-10 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E726-01(2015) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D422-63(2007)e1 Standard Test Method for Particle-Size Analysis of Soils
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM D1937-98e1 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM D422-63(1998) Standard Test Method for Particle-Size Analysis of Soils
ASTM D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets
ASTM D1937-98 Standard Test Method for Carbon Black, Pelleted-Mass Strength
ASTM D1513-05(2023) Standard Test Method for Carbon Black, Pelleted—Pour Density
ASTM D1511-12(2023) Standard Test Method for Carbon Black—Pellet Size Distribution
ASTM D1937-12 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-21 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-13 Standard Test Method for Carbon Black, Pelletedmdash;Mass Strength
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D6217-10 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D5452-05 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM E2316-03(2014) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4699-03 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
ASTM D1513-05 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
ASTM D1513-99a(2004) Standard Test Method for Carbon Black, Pelleted8212;Pour Density
ASTM D1513-04 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
ASTM D1937-05 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM D1513-05(2012) Standard Test Method for Carbon Black, Pelletedmdash;Pour Density
ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM D4600-95(2000)e1 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D5627-94(2004) Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D5627-94(1998) Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D5627-94(2009) Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D5627-94(2009)e1 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D5627-17 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D451-91(1996)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D451/D451M-17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D4977-98b Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D4977-03 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM E3053-17 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM E3053-18e1 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM E3053-18 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
ASTM D3268-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM C492-92(2017) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM D3313-04 Standard Test Method for Carbon Black-Individual Pellet Hardness
ASTM D3313-05 Standard Test Method for Carbon Black8212;Individual Pellet Hardness
ASTM D3313-05a Standard Test Method for Carbon Black8212;Individual Pellet Hardness
ASTM E1521-01(2006) Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM D5230-19 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
ASTM D2338-02(2007) Standard Test Method for Determining Particle Size of Multicolor Lacquers
ASTM D2338-02 Standard Test Method for Determining Particle Size of Multicolor Lacquers
ASTM D2338-84(1996)e1 Standard Test Method for Determining Particle Size of Multicolor Lacquers
ASTM E1521-01 Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM E1521-93(1998) Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM D5230-09e1 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
ASTM D5230-12 Standard Test Method for Carbon Blackmdash;Automated Individual Pellet Hardness
ASTM D5230-09 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM D5230-12a Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
ASTM E1521-19 Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
ASTM D5230-21 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
ASTM D3313-12 Standard Test Method for Carbon Blackmdash;Individual Pellet Hardness
ASTM C520-15 Standard Test Methods for Density of Granular Loose Fill Insulations
ASTM C142/C142M-17 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D2338-02(2013) Standard Test Method for Determining Particle Size of Multicolor Lacquers
ASTM D5230-14e1 Standard Test Method for Carbon Black&x2014;Automated Individual Pellet Hardness
ASTM C357-94(2002)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C357-94(1998) Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C357-07(2015) Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM D6986-03(2016) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4977/D4977M-03(2013)e1 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D6933-18 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D6933-22 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM E1288-89(1994) Standard Test Method for The Durability of Biomass Pellets (Withdrawn 2003)
ASTM D4977-03(2009) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D2434-68(2000) Standard Test Method for Permeability of Granular Soils (Constant Head)
ASTM D3398-00 Standard Test Method for Index of Aggregate Particle Shape and Texture
ASTM D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture
ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM D2067-97(2008) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM C142/C142M-17(2023) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D6494-99 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6494-99(2004)e1 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6217-18 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6217-11(2016) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D7321-11e1 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
ASTM C544-03 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
ASTM C544-03(2008) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
ASTM C544-03(2013) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
ASTM C142-97 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D5230-05 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM C142-97(2004) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D5230-04e1 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM D5230-04 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM D6791-11 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D4699-99 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
ASTM D5821-01(2006) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM D5821-95 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5821-01 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D3466-76(1998) Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D4699-03(2008) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM D6791-22 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D3466-06(2018) Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D7321-18 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D7321-18a Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D6650-01 Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
ASTM D5230-13 Standard Test Method for Carbon Blackmdash;Automated Individual Pellet Hardness
ASTM B930-03(2017) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM D2210-21 Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
ASTM D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D6271-10 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM D6494-22 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
ASTM E1534-93(1998) Standard Test Method for Determination of ASH Content of Particulate Wood Fuels
ASTM D3685/D3685M-98(2005) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D3685/D3685M-98 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D3685/D3685M-13 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D6494-99(2010) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6494-99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D7647-10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
ASTM F1926/F1926M-14 Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM D5452-23 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM E1520-99 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM E1520-99(2004) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM E1520-99(2015) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
ASTM D6986-03(2010) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM E255-91(1997) Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E2558-08 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2558-13(2021) Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
ASTM D5230-00e2 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM D5230-00e1 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM D5230-00 Standard Test Method for Carbon Black-Automated Individual Pellet Hardness
ASTM D5230-03 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
ASTM D5230-10 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
ASTM D5230-14 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D7321-08 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D6175-98 Standard Test Method for Radial Crush Strength of Extruded Catalyst Particles
ASTM F1471-09 Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM D6217-98 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6217-98(2003)e1 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D6217-98(2008) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D621-64(1988)e1 Standard test method for particulate impurities in middle distillate fuels by laboratory filtration
ASTM E2396-11 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
ASTM E2396/E2396M-19 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM G76-05 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G76-04 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5955-02(2007) Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D5955-02 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D5955-02(2012)e1 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D4977/D4977M-03(2019) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D6646-03(2008) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
ASTM D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head)
ASTM F25/F25M-21 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
ASTM B930-03(2021) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

Indonesia Standards, Method Validation for Particulate Matter

SNI 7543-2009
SNI ASTM C123:2012 Test methods for lightweight particles in aggregate

Japanese Industrial Standards Committee (JISC), Method Validation for Particulate Matter

JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS A 1202:1990 Test method for density of soil particles
JIS A 1202:1999 Test method for density of soil particles
JIS A 1202:2009 Test method for density of soil particles
JIS R 1639-6:2007 Test methods of properties of fine ceramic granules Part 6: Compressive behavior of the granule beds
JIS R 1639-5:2007 Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule
JIS A 1143:2018 Method of test for content of floating particles in light weight coarse aggregate
JIS A 1126:2007 Method of test for content of soft particles in coarse aggregate by scratching
JIS Z 3284-2:2014 Solder paste -- Part 2: Test methods for solder particle shape, surface condition judgment, and particle size distribution
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS B 8392-4:2003 Compressed air -- Part 4: Test methods for solid particle content
JIS A 1126:2001 Method of test for content of soft particles in coarse aggregate by scratching
JIS A 1126:1993 Method of test for soft particles in coarse aggregates by use of scratch tester
JIS R 1639-3:1999 Test methods of properties of fine ceramic granules Part 3: Drying loss
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS R 1639-4:1999 Test methods of properties of fine ceramic granules Part 4: Flowability
JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
JIS A 1126 ERRATUM 1:2001 Method of test for content of soft particles in coarse aggregate by scratching (Erratum 1)

Korean Agency for Technology and Standards (KATS), Method Validation for Particulate Matter

KS F 2308-2016 Test method for density of soil particles
KS F 2308-2022 Test method for density of soil particles
KS F 2308-2016(2021) Test method for density of soil particles
KS D 0268-2005 Test method for solid particle impingement erosion
KS D 0268-2015 Test method for solid particle impingement erosion
KS M 2048-2001(2021) Testing method for deleterious particles in lubricating grease
KS L 3524-2006(2021) Testing method for hydration of magnesia or periclase grain
KS L 3524-1981 Testing method for hydration of magnesia or periclase grain
KS B ISO 11943:2008 Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS B ISO 11943-2008(2018) Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS L 1623-2012(2017) Testing method for compressive strength of fine ceramic granules
KS F 2575-2013(2018) Standard test method for flat or elongated particles in coarse aggregate
KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
KS F 2340-2014 Standard test method for sand equivalent value of granular soils and fine aggregates
KS B ISO 8573-4:2003 Compressed air-Test methods for solid particle content
KS B ISO 8524-2015(2020) Equipment for distributing granulated pesticides or herbicides — Test method
KS B ISO 8573-4:2013 Compressed air－Test methods for solid particle content
KS Q ISO 11648-2:2009 Statistical aspects of sampling from bulk materials-Part 2:Sampling of particulate materials
KS Q ISO 11648-2:2016 Statistical aspects of sampling from bulk materials－Part 2：Sampling of particulate materials
KS L ISO 719:2012 Glass-Hydrolytic resistance of glass grains at 98 ℃-Method of test and classification
KS I 9204-2021 Testing methods for determining particle rejection rate of micro-filtration membrane element and module
KS F 2516-2014 Standard test method for content of soft particles in coarse aggregate by scratching
KS F 2516-2014(2020) Standard test method for content of soft particles in coarse aggregate by scratching
KS L ISO 719:2022 Glass — Hydrolytic resistance of glass grains at 98 ℃ — Method of test and classification
KS L ISO 719-2012(2017) Glass－Hydrolytic resistance of glass grains at 98 ℃－Method of test and classification
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications

KR-KS, Method Validation for Particulate Matter

KS F 2308-2022(英文版) Test method for density of soil particles
KS F 2511-2022 Particle amount in aggregate Finer than 0.08 mm sieve Test method
KS K ISO 13982-2-2007(2022) Protective clothing for use against solid particulates－Part 2：Test method of determination of inward leakage of aerosols of fine particles into suits
KS F 2575-2013(2023) Standard test method for flat or elongated particles in coarse aggregate
KS L ISO 719-2022 Glass — Hydrolytic resistance of glass grains at 98 ℃ — Method of test and classification

国家市场监督管理总局、中国国家标准化管理委员会, Method Validation for Particulate Matter

GB/T 38413-2019 Textiles—Test methods for filtration of particulate matter
GB/T 36677-2018 Determination of fine particle emission rates from copying (including multi-function) devices
GB/T 6582-2021 Glass—Hydrolytic resisitance of glass grains at 98℃—Method of test and classification

Standard Association of Australia （SAA）, Method Validation for Particulate Matter

AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS/NZS 1141.7:2014
AS/NZS 3580.10.2:2013
AS 1774.2:2001(R2013)
AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
AS 1141.5:2000 Methods for sampling and testing aggregates - Particle density and water absorption of fine aggregate
AS 16140.3:2022 Microbiology of the food chain — Method validation, Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021, MOD)
AS 1141.18:1996 Methods for sampling and testing aggregates - Crushed particles in coarse aggregate derived from gravel

British Standards Institution (BSI), Method Validation for Particulate Matter

BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
BS ISO 8573-4:2001 Compressed air - Test methods for solid particle content
BS EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
BS EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits
BS ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Sampling of particulate materials
BS DD CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries
BS DD CEN/TS 14778-2:2006 Solid biofuels. Sampling. Methods for sampling particulate material transported in lorries
BS 7293:1990 Method of test for equipment for distributing granulated pesticides or herbicides
BS EN ISO 16140-2:2016 Microbiology of the food chain. Method validation. Protocol for the validation of alternative (proprietary) methods against a reference method
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
20/30408159 DC BS ISO 11943. Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
BS EN ISO 16140-5:2020 Microbiology of the food chain. Method validation - Protocol for factorial interlaboratory validation for nonproprietary methods
BS EN ISO 16140-4:2020 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory
BS ISO 11943:2021 Tracked Changes. Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
BS EN 1015-1:1999 Methods of test for mortar for masonry - Determination of particle size distribution (by sieve analysis)
BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
BS EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Method Validation for Particulate Matter

GB/T 38413-2019(英文版) Textiles—Test methods for filtration of particulate matter
GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 21540-2022 Hydraulic fluid power—On-line automatic particle-counting systems for liquids—Methods of calibration and validation
GB/T 21540-2008 Hydraulic fluid power.On-line automatic particle-counting systems for liquids.Methodsof calibration and validation
GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
GB/T 7702.15-1997 Standard test method for granular activated carbon from coal--Determination of ash content
GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
GB/T 7702.1-1997 Standard test method for granular activated carbon from coal--Determination of moisture content
GB/T 7702.16-1997 Standard test method for granular activated carbon from coal--Determination of pH value
GB/T 7702.17-1997 Standard test method for granular activated carbon from coal--Determination of floatation ratio
GB/T 7702.9-1997 Standard test method for granular activated carbon from coal--Determination of ignition temperature
GB/T 7702.9-2008 Test method for granular activated carbon from coal.Determination of ignition temperature
GB/T 7702.5-1997 Standard test method for granular activated carbon from coal--Determination of water absorption
GB/T 7702.20-1997 Standard test method for granular activated carbon from coal--Determination of pore volume
GB/T 7702.14-2008 Test method for granular activated carbon from coal.Determination of sulphur capacity
GB/T 12416.2-1990 Glass--Hydrolytic resistance of glass grains at 121℃--Test method and classification
GB 12416.2-1990 Test method and classification of water resistance of glass particles at 121°C
GB/T 6582-1997 Glass--Hydrolytic resistance of glass grains at 98℃--Method of test and classification
GB/T 7702.7-1997 Standard test method for granular activated carbon from coal--Determination of iodine number
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB/T 7702.10-1997 Standard test method for granular activated carbon from coal--Determination of service life
GB/T 7702.7-2008 Test method for granular activated carbon from coal.Determination of iodine number
GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
GB/T 21452-2008 Petroleum products.Determination of particulate content of middle distillate fuels.Laboratory filtration method
GB/T 7702.14-1997 Standard test method for granular activated carbon from coal--Determination of saturated sulphur capacity
GB/T 7702.22-1997 Standard test method for granular activated carbon from coal--Determination of breakthrough sulphur capacity
GB/T 7702.8-2008 Test method for granular activated carbon from coal.Determination of phenol adsorption
GB/T 7702.8-1997 Standard test method for granular activated carbon from coal--Determination of phenol adsorption
GB/T 7702.18-2008 Test method for granular activated carbon from coal.Determination of caramel adsorption
GB/T 7702.18-1997 Standard test method for granular activated carbon from coal--Determination of caramel adsorption
GB/T 7702.6-1997 Standard test method for granular activated carbon from coal--Determination of methylene blue adsorption
GB/T 7702.6-2008 Test method for granular activated carbon from coal.Determination of methylene blue adsorption
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
GB/T 7702.11-1997 Standard test method for granular activated carbon from coal--Determination of service life against henzene vapor
GB/T 7702.19-1997 Standard test method for granultar activated carbon from coal--Determination of carbon tetrachloride (CCI4) desportion
GB/T 7702.19-2008 Test method for granular activated carbon from coal.Determination of carbon tetrachloride(CCL(down4))desorption
GB/T 7702.13-1997 Standard test method for granular activated carbon from coal--Determination of carbon tetrachloride adsorption
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 7702.7-2023 Coal Granular Activated Carbon Test Methods Part 7: Determination of Iodine Adsorption Value

The American Road & Transportation Builders Association, Method Validation for Particulate Matter

AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
AASHTO T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO T 112-2021 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

RU-GOST R, Method Validation for Particulate Matter

GOST 32401-2013 Aviation fuels. Test method for particulate contamination
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia

International Organization for Standardization (ISO), Method Validation for Particulate Matter

ISO 11943:2018 Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation
ISO 11943:1999 Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
ISO 11943:2021 Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 719:1985 Glass; Hydrolytic resistance of glass grains at 98 degrees C; Method of test and classification
ISO 720:1985 Glass; Hydrolytic resistance of glass grains at 121 degrees C; Method of test and classification
ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
ISO/TR 4808:2021 Hydraulic fluid power - Interpolation method for particle count and filter test data
ISO 720:1981 Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
ISO 719:1981 Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
ISO 15167:1999 Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications

Anhui Provincial Standard of the People's Republic of China, Method Validation for Particulate Matter

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Danish Standards Foundation, Method Validation for Particulate Matter

DS/EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
DS/ISO 8524:1988 Equipment for distributing granulated pesticides or herbicides. Test method
DS/ISO 8573-4/Corr.1:2002 Compressed air - Part 4: Test methods for solid particle content
DS/ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
DS/EN 12341:1999 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DS/EN ISO 16140-3:2021 Microbiology of the food chain – Method validation – Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

CZ-CSN, Method Validation for Particulate Matter

CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
CSN 65 6206-1989 Hydraulic fluids and oils. Method for oding level of contamination by so- id particles
CSN 44 1787 Z1-1996
CSN ISO 720:1992 Glass. Hydraulytic resistance of glass at 121 grad C - Method of test and classification
CSN ISO 719:1992 Glass. Hydraulytic resistance of glass at 98 grad C - Method of test and classification

CEN - European Committee for Standardization, Method Validation for Particulate Matter

PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
PD CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets

American National Standards Institute （ANSI), Method Validation for Particulate Matter

ANSI/ASTM D5452:2012 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ANSI/ASHRAE 52.2b-2008 Method of Testing General Ventilation Air-Cleaning Devices for Removal by Particle Size

GM Daewoo, Method Validation for Particulate Matter

GMKOREA EDS-T-7662-2011

Guangdong Provincial Standard of the People's Republic of China, Method Validation for Particulate Matter

DB44/T 924-2011 Test Method for Free Water and Particulate Contaminants in Distillate Fuels Visual Method

Professional Standard - Agriculture, Method Validation for Particulate Matter

BJY 202304:2023 Supplementary testing methods for inspection items of Scutellaria baicalensis extract in Xiaobuihu granules

Military Standard of the People's Republic of China-General Armament Department, Method Validation for Particulate Matter

GJB 772.406-1989 Explosives test methods Determination of hard slag or insoluble particles

YU-JUS, Method Validation for Particulate Matter

JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws

国家药监局, Method Validation for Particulate Matter

YY/T 1640-2018 Test Method for Solubility of Calcium Phosphate Granules, Articles and Coatings for Surgical Implants

AASHTO - American Association of State Highway and Transportation Officials, Method Validation for Particulate Matter

T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
T 112-2000 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Method Validation for Particulate Matter

ASHRAE 4606-2003 Validation of a CFD Model for Temperature and Particulate Concentration in a Test Room with Mixed Air and Displacement Ventilation

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Method Validation for Particulate Matter

GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size

ES-UNE, Method Validation for Particulate Matter

UNE-EN 12697-17:2018 Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens
UNE-EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
UNE-EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)

Association of German Mechanical Engineers, Method Validation for Particulate Matter

VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 3491 Blatt 2-1980 Particulate matter measurement; production methods of test aerosols; foundations and synoptics
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods

Group Standards of the People's Republic of China, Method Validation for Particulate Matter

T/CECS 10136-2021 Test method for filtration efficiency of air filter media on spherical particulate matter from 20 nm to 500 nm
T/NAIA 079-2021 Coal-based granular activated carbon test method for denitrification determination of denitrification rate

PL-PKN, Method Validation for Particulate Matter

PN P50111-1962 Testing methods for paper indusfry produc?s. De?ermination of contamina- ?ion with i^on and copper par?ic les /J^and their compounds
PN-EN ISO 16140-3-2021-07 E Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

未注明发布机构, Method Validation for Particulate Matter

BS 3482-7:1991(1999) Methods of test for Desiccants — Part 7 : Determination of particle size

Association Francaise de Normalisation, Method Validation for Particulate Matter

NF EN ISO 13982-2:2005 Vêtements de protection à utiliser contre les particules solides - Partie 2 : méthode d'essai pour la détermination de la fuite vers l'intérieur d'aérosols de fines particules dans des combinaisons
NF ISO 11943:2021 Transmissions hydrauliques - Systèmes de comptage automatique en ligne de particules en suspension dans les liquides - Méthodes d'étalonnage et de validation
NF E51-304:2002 Compressed air - Part 4 : test methods for solid particle content.
NF X45-104:2022 Membranes filtrantes - Méthodes d'essais - Evaluation de l'efficacité de filtration particulaire des membranes de microfiltration
NF EN ISO 16140-3:2021 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 3 : protocole pour la vérification dans un seul laboratoire de méthodes de référence et de méthodes alternatives validées
NF X06-110-2*NF ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Part 2 : sampling of particulate materials
NF X43-003:1966 Atmospheric pollution. Method of weight determination of solid particles entrained by combustion gases.
NF P98-818-17:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17 : particle loss of porous asphalt specimen.
NF P98-818-17/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17 : particle loss of porous asphalt specimen.
NF V08-103-3*NF EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3 : protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
NF EN ISO 16140-2:2016 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 2 : protocole pour la validation de méthodes alternatives (commerciales) par rapport à une méthode de référence
NF V08-103-2*NF EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2 : protocol for the validation of alternative (proprietary) methods against a reference method
NF X44-014-5*NF EN ISO 29463-5:2022 High-efficiency filters and filter media for removing particles in air - Part 5 : test method for filter elements

Lithuanian Standards Office , Method Validation for Particulate Matter

LST EN 12341-2000 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
LST EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
LST EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

Professional Standard - Energy, Method Validation for Particulate Matter

NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus

VN-TCVN, Method Validation for Particulate Matter

TCVN 1046-2004 Glass.Hydrolytic resistance of glass grains at 98oC.Method of test and classification
TCVN 7431-2004 Glass.Hydrolytic resistance of glass grains at 121 C.Method of test and classification

Society of Automotive Engineers (SAE), Method Validation for Particulate Matter

SAE ARP1192-1971 METHOD FOR CALIBRATION AND VERIFICATION OF AUTOMATIC LIQUIDBORNE PARTICLE COUNTER (LIGHT METHOD)

AWS - American Welding Society, Method Validation for Particulate Matter

F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

RO-ASRO, Method Validation for Particulate Matter

SR ISO 4406:1987 Hydraulic fluid power - Fluids - Method for coding level of contamination by solid particles

ZA-SANS, Method Validation for Particulate Matter

SANS 3001-GR2:2009 Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials

Professional Standard - Commodity Inspection, Method Validation for Particulate Matter

SN/T 0990-2001 Method for the determination of whiteness,acidity and swelling capacity of granular bentonite for export

AENOR, Method Validation for Particulate Matter

UNE-EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)

AT-ON, Method Validation for Particulate Matter

OENORM EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

CH-SNV, Method Validation for Particulate Matter

SN EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

IN-BIS, Method Validation for Particulate Matter

NZ-SNZ, Method Validation for Particulate Matter

NZS 4407.3.7.1:1991 Methods of sampling and testing road aggregates Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve