ZH
RU
ES
Grease low temperature test
Grease low temperature test, Total:498 items.
In the international standard classification, Grease low temperature test involves: Lubricants, industrial oils and related products, Edible oils and fats. Oilseeds, Internal combustion engines for road vehicles, Mechanical testing, Fuels, Analytical chemistry, Petroleum products in general, Fibre optic communications, Environmental testing, Food products in general, Plastics, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, TESTING, Electrical and electronic testing, Thermodynamics and temperature measurements, Paint ingredients, Wastes, Valves, Products of the textile industry, Raw materials for rubber and plastics, Photography, Energy and heat transfer engineering in general, Test conditions and procedures in general, Products of the chemical industry, Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Waxes, bituminous materials and other petroleum products, Metrology and measurement in general, Road vehicles in general, Linear and angular measurements, Optical equipment, Railway rolling stock, Inks. Printing inks, Coals, Pipeline components and pipelines, Equipment for the chemical industry, Shipbuilding and marine structures in general, Rubber, Wind turbine systems and other alternative sources of energy, Welding, brazing and soldering, Railway engineering in general, Optics and optical measurements, Metalliferous minerals, Adhesives, Road vehicle systems, Rails and railway components, Milk and milk products, Refractories, Surface treatment and coating, Burners. Boilers, Explosion protection, Water quality, Organic chemicals, Non-destructive testing, Kitchen equipment, Textile auxiliary materials, Rubber and plastics products, Paints and varnishes.
Professional Standard - Petrochemical Industry, Grease low temperature test
- SH/T 0211-1998 Rust preventive oils and greases.Test method of low temperature adhesive property
- SH/T 0644-1997 Test method for low temperature stability of aviation hydraulic oil
- SH/T 0217-1998 Rust preventive oils and greases.Evaluation of rusting grade
- SH/T 0081-1991 Anti-rust grease salt spray test method
- SH/T 0218-1992 Anti-rust oil test piece preparation method
- SH/T 0218-1993 Anti-rust oil test piece preparation method
- SH/T 0212-1998 Rust preventive oils and greases.Test method of removability
- SH/T 0080-1991 Anti-rust oil corrosion test method
- SH/T 0082-1991 Anti-rust grease run-off point test method
- SH/T 0129-1992 Petroleum wax and petroleum grease ignition residue test method
- SH/T 0214-1998 Rust preventive oils and greases.Test method of separating stability
- SH/T 0533-1992 Corrosion evaluation method of anti-rust grease anti-rust test piece
- SH/T 0584-1994 Anti-rust grease packaging storage test method (shutter box method)
GM North America, Grease low temperature test
IN-BIS, Grease low temperature test
CZ-CSN, Grease low temperature test
American Society for Testing and Materials (ASTM), Grease low temperature test
- ASTM D4693-07(2012) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4693-07 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D1478-11(2017)e1 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1478-18 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1478-02 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1478-91(1997) Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1478-20 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1478-07 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D1478-11 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
- ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D4693-07(2021) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4539-22 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D7110-05a Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D4693-07(2017) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4539-17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-16 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D6267/D6267M-13 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D4693-97(2002)e1 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4693-97 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4693-03 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- ASTM D4539-98 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D453-94(2000)e1 Standard test method for filterability of diesel fuel by cryogenic flow test
- ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D7110-15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D4539-03e1 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-03 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-02 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-09 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D3709-89(1999) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
- ASTM D1957-86(1995)e1 Standard Test Method for Hydroxyl Value of Fatty Oils and Acids
- ASTM D832-92(1997) Standard Practice for Rubber Conditioning For Low-Temperature Testing
- ASTM D832-92(2001)e1 Standard Practice for Rubber Conditioning For Low-Temperature Testing
- ASTM D370-84(1995)e1 Standard Test Method for Dehydration of Oil-Type Preservatives
- ASTM D3709-89(2005)e1 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
- ASTM D3709-89(2010) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
- ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D1957-86(2001) Standard Test Method for Hydroxyl Value of Fatty Oils and Acids
- ASTM D937-97 Standard Test Method for Cone Penetration of Petrolatum
- ASTM D937-97(2002) Standard Test Method for Cone Penetration of Petrolatum
- ASTM E1072-85(1989)e1 Test Method for Low Temperature Breakdown of Iron Ores
- ASTM D7110-14 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D722-93 Standard Test Method for Grease Resistance of Paper
- ASTM D4684-07 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D5440-93(2003) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D722-93(1997) Standard Test Method for Grease Resistance of Paper
- ASTM D3232-88 Test Method for Measurement of Consistency of Lubricating Greases at High Temperatures
- ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
- ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM D6896-03(2007) Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
- ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
- ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D937-04 Standard Test Method for Cone Penetration of Petrolatum
- ASTM D7110-05a(2011) Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM E1491-97(2002) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM E1491-97 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM D4684-99e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-20 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-07e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-17a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D1329-08 Standard Test Method for Evaluating Rubber Propertyx2014;Retraction at Lower Temperatures (TR Test)
- ASTM D1329-16(2021) Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
- ASTM D3921-96 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
- ASTM D3921-96(2003)e1 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
- ASTM D5560-95(2011) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
- ASTM D5440-93(1997) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-93(2009) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5355-95(2017) Standard Test Method for Specific Gravity of Oils and Liquid Fats
- ASTM D5355-95(2021) Standard Test Method for Specific Gravity of Oils and Liquid Fats
- ASTM D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5554-15(2021) Standard Test Method for Determination of the Iodine Value of Fats and Oils
- ASTM D5440-17 Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5355-95(2012) Standard Test Method for Specific Gravity of Oils and Liquid Fats
- ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
- ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
- ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
- ASTM D3793-00 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films
SG-SPRING SG, Grease low temperature test
- SS 11 Pt.17-1986 Methods Of Sampling And Test For Oils And Fats Part 17 : Cold Test
General Motors Corporation (GM), Grease low temperature test
NL-NEN, Grease low temperature test
- NEN 3911-1982 Bitumen and tar products - Tarbitumen-cold
- NEN 6317-1981 Test methods for vegetable and animal oils and fats - Determination of dilatation of fats
- NEN 6342-1980 Test methods for vegetable and animal oils and fats - Determination of the hydroxyl value
Canadian General Standards Board （CGSB), Grease low temperature test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grease low temperature test
- GB/T 5539-1985 Inspection of vegetable oils--Qualitative test of oils
- GB/T 5539-2008 Inspection of grain and oils.Qualitative test of oils
- GB/T 10589-2008(英文版) Specifications for low temperature test chambers
- GB/T 5531-2008 Inspection of grain and oils.Heating testof vegetable fats and oils
- GB/T 5531-1985 Inspection of vegetable oils--Heating test
- GB/T 10590-1989 Specification for low temperature/low air pressure test chambers
- GB 2361-1992 Anti-rust grease damp heat test method
- GB/T 2361-1992 Rust preventing oils and greases—Test method of wet heat
- GB/T 10589-1989 Specification for low temperature test chambers
- GB/T 10589-2008 Specification for low temperature test chambers
- GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
- GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
- GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
- GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
- GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
- GB/T 11606.3-1989 The method of environmental test for analytical instruments--Cold test
- GB/T 10592-2008 Specifications for low/high temperature test chambers
- GB/T 10592-1989 Specification for low/high temperature test chambers
- GB/T 13239-1991 Metallic materials--Tensile testing at low temperatures
- GB/T 10592-2023 High and low temperature test chamber technical conditions
- GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
- GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
- GB/T 28958-2012 Test methods of low temperature performance for passenger car
- GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
- GB/T 11606.14-1989 The method of environmental test for analytical insturments--Cold storage test
- GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
- GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
- GB/T 2424.1-2015 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests
- GB/T 2423.25-1992 Basic environmental testing procedures for electric and electronic products--Test Z/AM: combined cold/low air pressure tests
- GB/T 480-2000 Test for carbonization of coal in aluminum retort
- GB/T 1341-2001 Gray--King assay for coal
- GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
- GB/T 5564-1994 Rubber and plastics hoses--Subambient temperature flexibility tests
- GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
- GB/T 480-2010 Test method for aluminum retort low temperature carbonization of coal
- GB/T 13239-2006 Metallic materials.Tensile testing at low temperature
- GB/T 1341-2007 Gray-King assay of coal
- GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
- GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
- GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
- GB/T 16864-1997 Method for testing cryogenic transmissivity of crystals
- GB/T 5564-2006 Rubber and plastics hoses Subambient temperature flexibility tests
- GB/T 2423.42-1995 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
- GB/T 21497-2008 Animal and vegetable fats and oils.Flashpoint limit test using Pensky-Martens closed cup flash tester
- GB/T 12085.5-2010 Optics and optical instruments.Environmental test methods.Part 5:Combined cold,low air pressure
- GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
- GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
- GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
- GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
- GB/T 7758-2002 Rubber,vulcanized--Determination of low-temperature characteristics--Temperature-retraction procedure (TR test)
- GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests
- GB/T 2423.27-2005 Environmental testing for electric and electronic products.Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test
- GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
- GB/T 12085.5-1989 Optics and optical instruments--Environmental test methods--Combined cold,low air pressure
- GB/T 2423.27-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Z/AMD: The successive integrated low temperature/low atmospheric pressure/damp-heat method
- GB/T 18426-2001 Rubber--or plastics-coated fabrics--Low-temperature bend test
- GB/T 12584-2001 Rubber or plastics coated fabrics--Low-temperature impact test
Taiwan Provincial Standard of the People's Republic of China, Grease low temperature test
- CNS 8247-1988 Method of Low Temperature Test of Carburetors for Automobiles
- CNS 13277-1993 Method of Test for Cold Filter Plugging Point of Distillate Fuels
- CNS 10097-1983 Method of Bleaching Test for Fats and Oils
- CNS 10100-1983 Method of Test for Acid Value of Fats and Oils
- CNS 3652-2003 Method of test for edible oils and fats－Cold test
- CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
- CNS 12866-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Cold/Low Air Pressure Tests
- CNS 14431-2000 Method of test for performance of oil/grease interceptor
- CNS 8992-1982 Chemical Reagent (Fatty Oil, Fatty Acia and Higher Alcohol Determination)
- CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)
- CNS 10021-1983 Method of test for torsion under low temperature of vulcanized rubber (→CNS 3564)
- CNS 11233-1992 Basic Environmental Testing Procedures Part 2`75Test 3,Test A`75Cold
- CNS 14605-2001 Method of test for congealing point of petroleum waxes, including petrolatum
- CNS 14823-2004 Liquid-in-glass thermometers for testing of petroleum products
- CNS 12867-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Dry Heat/Low Air Pressure Tests
- CNS 3653-2003 Method of test for edible oils and fats－AOM method for stability test
- CNS 4841-2003 Method of test for edible oils and fats－Determination of melting point (capillary tube method)
- CNS 13876-1997 Method of test for swelling of lubricants on synthetic rubbers
JSAE - Society of Automotive Engineers of Japan@ Inc., Grease low temperature test
- JASO M331-1991 Low and medium temperature detergency test procedure for evaluating automobile gasoline engine oils
British Standards Institution (BSI), Grease low temperature test
- BS ISO 13737:2004 Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature cone penetration of lubricating greases
- BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
- BS EN 60068-3-1:1999 Environmental testing - Guidance - Cold and dry heat tests - Cold and dry heat tests
- BS EN 60068-2-39:1999 Environmental testing - Test methods - Tests - Test Z/AMD - Combined sequential cold, low air pressure and damp heat test
- BS 684-2.29:1978 Methods of analysis of fats and fatty oils - Other methods - Cottonseed oil test (Halphen)
- BS 2000-317:1995 Methods of test for petroleum and its products - Determination of residues in liquefied petroleum gases - Low temperature evaporation method
- BS EN 60068-2-1:1993 Environmental testing - Test methods - Tests A. Cold
- BS EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
- BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
- BS 903-A29:1997 Physical testing of rubber - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- BS EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11j - Cold
- BS EN ISO 6892-3:2015 Metallic materials. Tensile testing. Method of test at low temperature
- BS EN 1876-2:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Impact test on loop
- BS ISO 2921:2011 Rubber, vulcanized. Determination of low-temperature retraction (TR test)
- BS EN 14214:2012 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
- BS EN 14214:2012+A1:2014 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
- BS EN 60512-11-2:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11b - Combined/sequential cold, low air pressure and damp heat
Association Francaise de Normalisation, Grease low temperature test
- NF ISO 13737:2004 Produits pétroliers et lubrifiants - Détermination de la pénétrabilité au cône à basse température des graisses lubrifiantes
- NF T60-171:1986 Petroleum products. Determination of cone penetration of greases under low temperature.
- NF T60-629:2006 Produits pétroliers et lubrifiants - Couple à basse température d'une graisse pour roulement à billes
- NF C20-740*NF EN 60068-2-40:2000 Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests
- NF T60-171*NF ISO 13737:2004 Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases.
- NF C20-701/A1:1993 Environmental testing - Part 2 : tests - Tests A : cold.
- NF C20-701:1993 Environmental testing - Part 2 : tests - Tests A : cold.
- NF C20-701/A2:1995 Environmental testing - Part 2 : tests - Tests A : cold.
- NF C20-701*NF EN 60068-2-1:2007 Environmental testing - Part 2-1 : tests - Tests A : cold.
- NF C93-400-11-2*NF EN 60512-11-2:2002 Connectors for electronic equipment - Tests and measurements - Part 11-2 : climatic tests - Test 11b : combined/sequential cold, low air pressure and damp heat.
- NF T60-215:1961 Animal and vegetable fats. Oxidizability test of technical oleic acids for oiling (mackey test).
- NF T60-189:2011 Produits pétroliers - Graisses lubrifiantes - Essai d'évaluation de la tendance à l'écoulement des graisses lubrifiantes
- NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
- NF A03-001-3*NF EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3 : method of test at low temperature
- NF T46-032:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test).
- NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
- NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
- NF T60-200*NF EN ISO 661:2005 Animal and vegetable fats and oils - Preparation of test sample
- NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
- NF E31-319*NF EN 293:1992 Oil pressure atomizing nozzles. Minimum requirements. Testing.
- NF A09-120-6*NF EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6 : penetrant testing at temperatures lower than 10 oC.
- NF T46-032:1977 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure(tr test).
- NF T46-032*NF ISO 2921:2020 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- NF D38-311:1996 Household refrigerating appliances. Refrigerators with or without low-temperature compartment. Characteristics and test methods.
Professional Standard - Aerospace, Grease low temperature test
- QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
- QJ 1323.7-1987 Electromagnetic relay test method low temperature test
- QJ 1612-1989 Cryogenic valve medium test method
- QJ 2676A-2014 Test method for adsorption properties of adsorbents at low temperature and pressure
- QJ 2676-1994 Adsorbent low temperature and low pressure adsorption performance test method
- QJ 2675.2-1994 Performance test methods for cryogenic vessels - Outgassing rate test
- QJ 2675.4-1994 Performance test methods for low temperature containers daily evaporation rate test
- QJ 20052-2011 Cryogenic test method for high pressure helium valve
- QJ 1238.2-1987 Low temperature test of cable test method on missile launch vehicle
- QJ 2675.1-1994 Low temperature container performance test method interlayer vacuum test
- QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
- QJ 2675.3-1994 Cryogenic vessel performance test method Vacuum interlayer leak rate test
- QJ 1238.21-1990 Low Temperature Bending Test of Cable Test Method on Missile Launch Vehicle
- QJ 1621-1989 Low temperature compression test method for rigid foamed plastics
- QJ 1620-1989 Low temperature tensile test method for rigid foamed plastics
- QJ 1177.4-1987 Low temperature test of environmental test method for ground-to-air and ship-to-air missile weapon system
Society of Automotive Engineers (SAE), Grease low temperature test
SAE - SAE International, Grease low temperature test
United States Navy, Grease low temperature test
American National Standards Institute （ANSI), Grease low temperature test
Professional Standard - Petroleum, Grease low temperature test
- SY/T 5420-1991 Basic environmental test methods for petroleum exploration and development instruments Test D: low temperature test
- SY/T 0526.12-1993 Low temperature embrittlement and peeling test of coal tar enamel overlay enamel
RU-GOST R, Grease low temperature test
- GOST 34195-2017 Diesel fuels. Determination of filterability by low-temperature flow test (LTFT)
- GOST R ISO 13737-2013 Petroleum products and lubricants. Determination of cone penetration of lubricating greases at low temperature
- GOST 11150-1984 Metals. Methods of tension tests at low temperatures
- GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
- GOST R 54289-2010 Diesel fuels. Method for determination of filterability by low-temperature flow test (LTFT)
GM Holden Ltd, Grease low temperature test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Grease low temperature test
- GB/T 5531-2018 Inspection of grain and oils—Heating test of vegetable fats and oils
- GB/T 35877-2018 Inspection of grain and oils—Cold test of animal and vegetable fats and oils
- GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
- GB/T 32065.2-2015 Environmental test methods for oceanographic instruments—Part 2：Cold
- GB/T 32065.3-2015 Environmental test methods for oceanographic instruments—Part 3: Cold storage
Korean Agency for Technology and Standards (KATS), Grease low temperature test
- KS M ISO 13737-2005(2020) Petroleum products and lubricants－Determination of low-temperature cone penetration of lubricating greases
- KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
- KS M 2732-2005(2010) Testing methods for acid value of fats and oils
- KS M 2730-2013 Bleaching test for fats and oils
- KS M 2731-2013 Method of alkali refining of fats and oils for bleaching test
- KS R 0016-1971 Method of high and low temperature test for automobile parts
- KS M ISO 13737:2005 Petroleum products and lubricants－Determination of low-temperature cone penetration of lubricating greases
- KS M ISO 8623:2007 Tall-oil fatty acids for paints and varnishes-Specifications and test methods
- KS M ISO 8623:2016 Tall-oil fatty acids for paints and varnishes－Specifications and test methods
- KS K 0766-2011 Test method for low temperature effect on coated cloth
- KS B 2821-2007(2022) Method for performance testing of low temperature valves
- KS K 0766-1986 Test method for low temperature effect on coated cloth
- KS C IEC 60068-2-39:2002 Environmental testing－Part 2：Tests－Test Z/AMD：Combined sequential cold, low air pressure and damp heat test
- KS M 2050-1996(2021) Testing method for oil separation of lubricating greases
- KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
- KS B 2821-2007 Method for performance testing of low temperature valves
- KS K 0766-2017 Test method for low temperature effect on coated cloth
- KS M 2450-2007(2022) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
- KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
- KS M 2049-2016 Testing method for oxidation characteristics of lubricating grease
- KS R 0016-2015 Method of high and low temperature test for automobile parts
- KS B 2821-2007(2017) Method for performance testing of low temperature valves
- KS V ISO 21159:2020 Butterfly valves for use in low temperature applications —Design and testing requirements
- KS K 0766-2022 Test method for low temperature effect on coated cloth
- KS M 6724-2003 Testing methods for low temperature-retraction of vulcanized rubber
- KS M 6724-1986 Testing methods for low temperature-retraction of vulcanized rubber
- KS V ISO 18139:2019 Globe valves for use in low temperature applications — Design and testing requirements
- KS H ISO 661-2007(2021) Animal and vegetable fats and oils－Preparation of test sample
- KS V 0824-2011(2021) Temperature environmental test procedure for compressors and pumps under cryogenic condition
- KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
- KS E ISO 13930:2008 Iron ores for blast furnace feedstocks-Determination of low-temperature reduction-disintegration indices by dynamic method
- KS M 6722-2008 Testing methods of torsional modules at low temperature for vulcanized rubbers
- KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts
- KS E ISO 13930:2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
- KS M 6722-1983 Testing methods of torsional modules at low temperature for vulcanized rubbers
- KS C 0220-1999 Environmental testing procedures Part 2:Tests, Tests A:Cold
- KS M ISO 2921:2009 Rubber, vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure(TR test)
- KS M 6676-2008 Rubber, vulcanized or thermoplastic－Determination of low temperature properties
- KS V 0824-2011(2016) Temperature environmental test procedure for compressors and pumps under cryogenic condition
- KS M ISO 2921:2014 Rubber, vulcanized — Determination of low-temperature retraction (TR test)
- KS M 2734-1983 Testing method of colour of fats and oils by means of loviboned tintometer
- KS M ISO 4646:2009 Rubber- or plastics-coated fabrics-Low-temperature impact test
- KS M ISO 4675:2012 Rubber- or plastics-coated fabrics－Low-temperature bend test
国家市场监督管理总局、中国国家标准化管理委员会, Grease low temperature test
- GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
- GB/T 39933-2021 Rotational moulding—Test method for low temperature impact
- GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3: Method of test at low temperature
- GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test)
(U.S.) Ford Automotive Standards, Grease low temperature test
Professional Standard - Electron, Grease low temperature test
- SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G
- SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
- SJ 2327-1983 Generic specification for low temperature test chambers
- SJ/Z 9001.2-1987 Basic environmental testing procedures--Part 2: Tests--Test A: Cold
- SJ/Z 9001.11-1987 Basic environmental testing procedures--Part 2: Tests--Test Z/AMD: Combined sequential cold,low air presure,and damp heat test
German Institute for Standardization, Grease low temperature test
- DIN EN 60068-2-40:2000 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999
- DIN EN 60068-2-39:2000 Environmental testing - Part 2: Tests; test Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39:1976); German version EN 60068-2-39:1999
- DIN EN ISO 6892-3:2015-07 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015); German version EN ISO 6892-3:2015
- DIN ISO 15579:2002 Metallic materials - Tensile testing at low temperature (ISO 15579:2000)
- DIN 53545:2016-12 Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
- DIN 53545:1990 Determination of low-temperature behaviour of elastomers; principles and test methods
- DIN ISO 9022-5:1999 Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994)
- DIN EN 1163:1996 Feather and down - Test methods - Determination of the oil and fat content; German version EN 1163:1996
Japanese Industrial Standards Committee (JISC), Grease low temperature test
- JIS C 60068-2-40:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
- JIS C 0030:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
- JIS K 3501:1962 Method of bleaching test for fats and oils
- JIS K 3504:1962 Testing method for acid value of fats and oils
- JIS C 60068-2-1:2010 Environmental testing -- Part 2-1: Tests -- Test A: Cold
- JIS C 60068-2-1:1995 Environmental testing procedures Part 2: Tests, Tests A: Cold
- JIS C 60068-2-39:2004 Environmental testing -- Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
- JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
- JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- JIS D 0204:1967 Method of high and low temperature test for automobile parts
- JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
- JIS C 5027:1975 Storage (low temperature) testing method for electronic components
- JIS K 6261-3:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 3: Low temperature stiffening (Gehman test)
- JIS K 6261-4:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 4: Low-temperature retraction (TR test)
- JIS C 60068-3-1:1995 Background information, Section One -- Cold and dry heat tests
- JIS K 6261:1997 Low temperature testing methods for rubber, vulcanized or thermoplastic
中国石油化工总公司, Grease low temperature test
- SH/T 0217-1992 Anti-rust grease test piece rust test method
- SH/T 0533-1993 Method for evaluating rust of anti-rust grease and anti-rust test pieces
- SH/T 0215-1992 Anti-rust grease deposition value and wear resistance test method
VN-TCVN, Grease low temperature test
- TCVN 7699-2-40-2007 Environmental testing.Part 2-40: Tests.Test Z/AM: Combined cold/low air tests
- TCVN 7699-2-1-2007 Environmental testing.Part 2-1: Tests.Test A: Cold
- TCVN 7699-2-39-2007 Environmental testing.Part 2-39: Tests.Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
Professional Standard - Medicine, Grease low temperature test
TIA - Telecommunications Industry Association, Grease low temperature test
International Organization for Standardization (ISO), Grease low temperature test
- ISO 13737:2004 Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases
- ISO 15579:2000 Metallic materials - Tensile testing at low temperature
- ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature
- ISO 13930:1998 Iron ores - Dynamic test for low-temperature reduction-disintegration
- ISO 4672:1978 Rubber products — Hoses — Low-temperature flexibility tests
- ISO 4672:1988 Rubber and plastics hoses; sub-ambient temperature flexibility tests
- ISO 2921:2005 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
- ISO 1432:1976 Title missing - Legacy paper document
- ISO 2921:1975 Title missing - Legacy paper document
- ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
- ISO 4672:1997 Rubber and plastics hoses - Sub-ambient temperature flexibility tests
- ISO 1432:1982 Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination
- ISO 2921:1982 Rubber, vulcanized; Determination of low temperature characteristics; Temperature- retraction procedure (TR test)
- ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
- ISO 4646:1978 Rubber or plastics coated fabrics — Low temperature impact test
- ISO 4675:1979 Fabrics coated with rubber or plastics — Low temperature bend test
- ISO 4675:1990 Rubber- or plastics-coated fabrics; low-temperature bend test
- ISO 4646:1989 Rubber- or plastics-coated fabrics; low-temperature impact test
TH-TISI, Grease low temperature test
European Committee for Electrotechnical Standardization（CENELEC）, Grease low temperature test
- EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
- HD 323.2.40 S1-1988 Basic Environmental Testing Procedures - Part 2: Tests Test Z/AM: Combined Cold/Low Air Pressure Tests
- EN 60068-2-40:1999 Environmental Testing Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests
CENELEC - European Committee for Electrotechnical Standardization, Grease low temperature test
International Electrotechnical Commission (IEC), Grease low temperature test
未注明发布机构, Grease low temperature test
- GJB 4.3-1983 Environmental testing of ship electronic equipment Low temperature testing
- GJB 150.4-1986 Environmental test methods for military equipment Low temperature test
- GJB 4.4-1983 Environmental testing of ship electronic equipment Low temperature storage testing
- BS EN ISO 661:2005(2007) Animal and vegetable fats and oils — Preparation of test sample
- BS 2000-317:1995(2010) Methods of test for petroleum and its products — BS 2000 - 317 : Determination of residues in liquefied petroleum gases — Low temperature evaporation method
- GJB 150.4A-2009 Military equipment laboratory environmental test methods Part 4: Low temperature test
Professional Standard - Machinery, Grease low temperature test
- JB/T 12003-2014 Specification for valve cryogenic test rig
- JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
- JB/T 9444.2-1999 Basic environmental testing method of copying machines - Test A: Low temperature test
- JB/T 3356.1-1999 Performance test methods for cryogenic liquid containers
- JB/T 3206-1999 Test method for accelerated dew corrosion of rust preventive oils and greases
RO-ASRO, Grease low temperature test
Group Standards of the People's Republic of China, Grease low temperature test
Professional Standard - Chemical Industry, Grease low temperature test
Henan Provincial Standard of the People's Republic of China, Grease low temperature test
工业和信息化部/国家能源局, Grease low temperature test
- JB/T 13229-2017 High and low temperature environmental chamber for testing machine
(U.S.) Telecommunications Industries Association , Grease low temperature test
Professional Standard - Aviation Industry, Grease low temperature test
- Q/HBm 109-1994 High temperature and low temperature test methods for auto parts
Professional Standard - Ocean, Grease low temperature test
- HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
- HY 016.2-1992 Low temperature test for basic environmental test methods for marine instruments
- HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
- HY 016.3-1992 Basic environmental test methods for marine instruments Low temperature storage test
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Grease low temperature test
Military Standard of the People's Republic of China-General Armament Department, Grease low temperature test
- GJB 8709.20-2015 Rocket Launcher Test Methods Part 20: Low Temperature Test
- GJB 797.2-1990 Environmental test methods for mine blasting equipment - Low temperature test
- GJB 17.21-1984 Test methods for aviation wires and cables Low temperature bending test
- GJB 983.5-1993 Military rubber film test method low temperature folding test
- GJB 595.3-1988 Environmental test methods for artillery optical instruments - low temperature test
- GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
- GJB 8671.13-2015 Test methods for metal cartridges Part 13: Low temperature strength test
- GJB 2201-1994 Test methods for ultra-low temperature mechanical properties of metals
Standard Association of Australia （SAA）, Grease low temperature test
Professional Standard - Aviation, Grease low temperature test
- HB 6744-1993 Test method for low temperature flexure of room temperature vulcanizing sealants
- HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
- HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)
- HB 5274-1993 Test method for low temperature flexibility of room temperature vulcanizing sealants
- HB 5278-1984 Test method for low temperature impact toughness of metals
- HB 5321-1993 Test method for low temperature strength of anaerobic adhesives for aviation
工业和信息化部, Grease low temperature test
- JB/T 13702.1-2019 Camera Environmental Testing Part 1: High and Low Temperature Tests
- WJ/T 748-2014 Low temperature test method for glue used in optical instruments
- WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
IT-UNI, Grease low temperature test
- UNI 5779-1966 Testing of inks for printing trade. Resistance to oils and alimentary fats.
AR-IRAM, Grease low temperature test
PL-PKN, Grease low temperature test
- PN C04288-08-1987 Technical fats Methods of testing Determination of iodine value
- PN C89085-21-1988 Epoxy resins Methods of testing Determination of the peak temperatur?
- PN C89085-11-1987 Epoxy resins Methods of testing Determination of durability in elevated temperatur?
- PN A86914-1970 Edible vegetable fats Testing methods Determination of the iodine value
Professional Standard - Textile, Grease low temperature test
- FZ/T 01007-1991 Test method for low temperature resistance of coated fabrics
- FZ/T 01143-2018 Test method for low temperature folding resistance of coated fabrics
Liaoning Provincial Standard of the People's Republic of China, Grease low temperature test
- DB21/T 2761-2017 High and low temperature test specification for wind power gearbox
KR-KS, Grease low temperature test
- KS V ISO 21159-2020 Butterfly valves for use in low temperature applications —Design and testing requirements
- KS V ISO 18139-2019 Globe valves for use in low temperature applications — Design and testing requirements
- KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts
- KS M ISO 2921-2022 Rubber, vulcanized Determination of low temperature characteristics Temperature retraction procedure(TR test)
Professional Standard - Military and Civilian Products, Grease low temperature test
- WJ 748-1994 Low temperature test method for adhesives used in optical instruments
- WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments
Professional Standard - Railway, Grease low temperature test
- TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
- TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products
Indonesia Standards, Grease low temperature test
ES-UNE, Grease low temperature test
- UNE-EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
BE-NBN, Grease low temperature test
- NBN T 31-022-1985 Rubber, vulcanized - Low température stiffening (Gehman test) - Determination
- NBN T 31-031-1985 Rubber, vulcanized - Determinationof low temperature characteristics- Temperature-re-traction procedure(TR test)
Professional Standard - Electricity, Grease low temperature test
- DL/T 2133-2020 Preventive test procedure for capacitive electroscope at low temperature
European Committee for Standardization (CEN), Grease low temperature test
- EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)
PT-IPQ, Grease low temperature test
Danish Standards Foundation, Grease low temperature test
- DS/EN 293:1993 Oil pressure atomizing nozzles. Minimum requirements. Testing
- DS/EN ISO 8623:2011 Tall-oil fatty acids for paints and varnishes - Specifications and test methods
- DS/ISO 2921:1979 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure (TR test)
- DS/ISO 1432:1984 Rubber, vulcanized. Low temperature stiffening (Gehman test). Determination
SE-SIS, Grease low temperature test
- SIS SS-ISO 4672:1990 Rubber and plastics hoses — Sub-ambient temperature flexibility tests
- SIS SS-ISO 2921:1990 Rubber, vulcanized — Determination of low temperature characteristics — Temperature-retraction procedure (TR test)
AENOR, Grease low temperature test
- UNE-ISO 2921:2017 Rubber, vulcanized. Determination of low temperature retraction (TR test)
GM Daewoo, Grease low temperature test
Professional Standard - Commodity Inspection, Grease low temperature test
- SN/T 0801.16-1999 Animal and vegetable oils and fats for import and export.Method for the determination of phosphoric acid test value
TR-TSE, Grease low temperature test
- TS 2651-1977 Rubber, Vulcanized - Determination Of Stiffness At Low Temperature (Gehman Test)