ZH
RU
ES

Rubber hardness

Rubber hardness, Total:348 items.

In the international standard classification, Rubber hardness involves: Rubber, Materials for aerospace construction, Footwear, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Mechanical testing, Rubber and plastics products, Metrology and measurement in general, Aerospace fluid systems and components, Insulating materials, Cellular materials, Plastics, Leather technology, Coatings and related processes used in aerospace industry.

RO-ASRO, Rubber hardness

STAS 5441/1-1974 VULCANIZED ELASTOMERES Determination of hardness expressed in International Rubber Hard Degree
STAS 5441/3-1975 VULCAN IZED RUBBERS Determination cf hardness of vulcanizcd rubbers cf high hardness

Association Francaise de Normalisation, Rubber hardness

NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
NF T46-025:1981 Rubber. Determination of stiffness of vulcanized rubber (cehemann test).
NF T46-003-3*NF ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3 : dead-load hardness using the very low rubber hardness (VLRH) scale
NF T46-084:2012 Rubber - Calibration and verification of hardness testers.
NF EN ISO 21509:2015 Plastiques et ébonite - Vérification des duromètres Shore
NF T47-404-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method.
NF L17-013*NF EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
NF L17-311*NF EN 2837:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD.
NF L17-010*NF EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
NF L17-006*NF EN 2843:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD
NF L17-011*NF EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
NF T46-060:2005 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide.
NF T46-060:2015 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
NF L17-309*NF EN 2836:2012 Aerospace series - Chloroprene rubber (CR) -Heat resistance - Hardness 50 IRHD.
NF L17-308*NF EN 2835:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD
NF T46-003:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD).
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.
NF L17-017*NF EN 2848:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD
NF L17-014*NF EN 2845:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD
NF L17-016*NF EN 2846:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD
NF L17-009*NF EN 2849:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
NF T46-003-1*NF ISO 48-1:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1 : introduction and guidance
NF ISO 48-1:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 1 : introduction et lignes directrices
NF ISO 48-4:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 4 : dureté par pénétration par la méthode au duromètre (dureté Shore)
NF T46-003-9*NF ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9 : calibration and verification of hardness testers
NF T46-003-7*NF ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7 : apparent hardness of rubber-covered rollers by Shore-type durometer method
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
NF T46-003-6*NF ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6 : apparent hardness of rubber-covered rollers by IRHD method
NF T46-003-2*NF ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2 : hardness between 10 IRHD and 100 IRHD
NF T46-003-8*NF ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8 : apparent hardness of rubber-covered rollers by Pusey and Jones method
NF ISO 48-7:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 7 : dureté apparente des cylindres revêtus de caoutchouc par la méthode au duromètre type Shore
NF T51-123*NF EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
NF ISO 48-9:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 9 : étalonnage et vérification des duromètres
NF ISO 48-6:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 6 : dureté apparente des cylindres revêtus de caoutchouc par la méthode DIDC
NF ISO 48-8:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 8 : dureté apparente des cylindres revêtus de caoutchouc par la méthode Pusey et Jones
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF L17-250-3*NF EN 2260:1996 Aerospace series. Silicone rubber (vmq). Hardness 60 irhd.
NF L17-250-4*NF EN 2261:1996 Aerospace series. Silicone rubber (vmq). Hardness 70 irhd.
NF L17-250-2*NF EN 2259:1996 Aerospace series. Silicone rubber (vmq). Hardness 50 irhd.
NF L17-210-1*NF EN 2566:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD
NF L17-210-2*NF EN 2567:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD
NF L17-210-3*NF EN 2568:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD
NF EN 2567:2019 Série aérospatiale - Élastomère fluoré (FKM) - Dureté 80 DIDC
NF EN 2568:2019 Série aérospatiale - Élastomère fluoré (FKM) - Dureté 90 DIDC
NF EN 2566:2019 Série aérospatiale - Élastomère fluoré (FKM) - Dureté 70 DIDC
NF ISO 48-3:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 3 : dureté sous charge constante au moyen de l'échelle de très faible dureté (VLRH)
NF L17-263-2*NF EN 3826:2015 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD
NF L17-263-1*NF EN 3825:2015 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD
NF L17-263-3*NF EN 3827:2015 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
NF T46-027:1976 Rubbers. Determination of crystallization effects by hardness test.

International Organization for Standardization (ISO), Rubber hardness

ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 48:1994 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 18898:2006 Rubber - Calibration and verification of hardness testers
ISO 48:1994/Amd 1:1999 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD); Amendment 1
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
ISO 7267-1:1986 Rubber-covered rollers; Determination of apparent hardness; Part 1 : IRHD method
ISO 18517:2005 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
ISO 18517:2015 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 27588:2008 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 27588:2012 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 48-1:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1: Introduction and guidance
ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 48:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 48:1974 Title missing - Legacy paper document
ISO 48:1975 Title missing - Legacy paper document
ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 48:2007/Cor 1:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Technical Corrigendum 1
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers

Danish Standards Foundation, Rubber hardness

DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
DS/ISO 7267/1:1987 Rubber covered rollers. Determination of apparent hardness. Part 1: IRHD method
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/EN 2259:1996 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD
DS/EN 2260:1996 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD
DS/EN 2261:1996 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD
DS/EN 2104:1996 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD

British Standards Institution (BSI), Rubber hardness

BS EN 2259:1995 Silicone rubber (VMQ) - Hardness 50 IRHD
BS EN 2260:1995 Silicone rubber (VMQ) - Hardness 60 IRHD
BS EN 2261:1995 Silicone rubber (VMQ) - Hardness 70 IRHD
BS EN 2432:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD
BS EN 2431:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD
BS EN 2430:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD
BS EN 2429:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD
BS EN 2428:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD
BS EN 2104:1996 Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
BS ISO 7267-1:2009 Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - IRHD method
BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS ISO 18517:2008 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS EN 2841:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD
BS EN 2838:2013 Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD
BS EN 2843:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS EN 3698:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
BS EN 2844:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD
BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS ISO 27588:2009 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS EN 2842:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD
BS EN 2840:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
BS EN 2849:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD
BS ISO 48-3:2018 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness. Dead-load hardness using the very low rubber hardness (VLRH) scale
BS EN 2848:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD
BS EN 2845:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 50 IRHD
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN 2568:2019 Aerospace series. Fluorocarbon rubber (FKM). Hardness 90 IRHD
BS EN ISO 21509:2015 Plastics and ebonite. Verification of Shore durometers
BS EN 2566:2019 Aerospace series. Fluorocarbon rubber (FKM). Hardness 70 IRHD
BS EN 2567:2019 Aerospace series. Fluorocarbon rubber (FKM). Hardness 80 IRHD
BS ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
BS EN 3825:2014 Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 60 IRHD

HU-MSZT, Rubber hardness

PK-PSQCA, Rubber hardness

PS 413-1964 DETERMINATION OF HARDNESS OF RUBBERS

SE-SIS, Rubber hardness

SIS 16 22 01-1962 Rubber. Determination of hardness

BR-ABNT, Rubber hardness

ABNT P-MB-497-1969

IL-SII, Rubber hardness

S.I.722-1968 TESTING OF HARDNESS OF VULCANIZED RUBBER

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Rubber hardness

GB/T 1698-2003 Ebonite--Determination of hardness by means of a durometer
GB/T 25940-2010 IRHD dead-load testers
GB/T 6031-1998 Rubber, Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 23651-2009 Rubber,vulcanized or thermoplastic.Hardness testing.Introduction and guide
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 39693.8-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method

Professional Standard - Chemical Industry, Rubber hardness

HG/T 3846-2008 Ebonite.Determination of hardness by means of a durometer
HG/T 2116-1991 Conventional international rubber hardness machine with high hardness
HG/T 2117-1991 Medium hardness of conventional international rubber hardness machine
HG/T 2118-1991 Conventional international rubber hardness machine with low hardness
HG 2116-1991 Conventional international rubber hardness machine with high hardness
HG 2117-1991 Medium hardness of conventional international rubber hardness machine
HG 2118-1991 Conventional international rubber hardness machine with low hardness
HG/T 2072-2009 Technical specifications for micro IRHD testers
HG/T 2368-2011 Technical specifications for rubber durometers types A
HG/T 2072-1991 Specifications for Micro International Rubber Hardness Tester
HG/T 2450-1999 Rubber-covered rollers-Determination of apparent hardness:IRHD method

Korean Agency for Technology and Standards (KATS), Rubber hardness

KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
KS M 6784-1994 Hardness testing methods for vulcanized rubber
KS M 6784-1999 Hardness testing methods for vulcanized rubber
KS M ISO 18898:2021 Rubber — Calibration and verification of hardness testers
KS M ISO 18898:2015 Rubber－Calibration and verification of hardness testers
KS M 6784-2009 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS M ISO 3387:2009 Rubber-Determination of crystallization effects by hardness measurements
KS M ISO 3387:2014 Rubber — Determination of crystallization effects by hardness measurements
KS M ISO 7267-1:2010 Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method
KS M ISO 18517-2017(2022) Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS M ISO 18517:2007 Rubber, vulcanized or thermoplastic－Hardness testing－Introduction and guide
KS M ISO 18517:2017 Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS M ISO 27588:2010 Rubber, vulcanized or thermoplastic-Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 27588:2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 21509:2014 Plastics and ebonite — Verification of Shore durometers

ZA-SANS, Rubber hardness

SANS 5650:1972 Determination of hardness of elastomeric material
SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 3387:2003 Rubber - Determination of crystallization effects by hardness measurements
SANS 5870:2008 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 10048:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 5870:1976 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 7619-2:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method

German Institute for Standardization, Rubber hardness

DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
DIN ISO 48-3:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN ISO 48-3:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN EN 2261:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995
DIN EN 2259:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995
DIN EN 2260:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995
DIN EN 2428:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995
DIN EN 2432:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995
DIN EN 2430:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995
DIN EN 2431:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995
DIN EN 2429:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995
DIN EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
DIN EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995
DIN ISO 18898:2017 Rubber - Calibration and verification of hardness testers (ISO 18898:2016)
DIN ISO 18898:2014 Rubber - Calibration and verification of hardness testers (ISO 18898:2012)
DIN ISO 27588:2014 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
DIN EN 2839:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD; German and English version FprEN 2839:2012
DIN EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD; German and English version EN 2839:2013
DIN EN 2843:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD; German and English version EN 2843:2013
DIN EN 2842:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD; German and English version EN 2842:2013
DIN EN 2843:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IHRD; German and English version FprEN 2843:2012
DIN EN 3698:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD; German and English version FprEN 3698:2012
DIN EN 3697:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD; German and English version FprEN 3697:2012
DIN EN 2841:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IHRD; German and English version FprEN 2841:2012
DIN EN 2841:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD; German and English version EN 2841:2013
DIN EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD; German and English version EN 3697:2013
DIN ISO 48-4:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN 2840:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD; German and English version EN 2840:2013
DIN EN 2844:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD; German and English version EN 2844:2013
DIN EN 2844:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IHRD; German and English version FprEN 2844:2012
DIN EN 2840:2012 Aerospace series- Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD; German and English version FprEN 2840:2012
DIN ISO 48-8:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN ISO 48-2:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD (ISO 48-2:2018)
DIN ISO 48-9:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN ISO 48-9:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN EN 2846:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD; German and English version FprEN 2846:2012
DIN EN 2846:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD; German and English version EN 2846:2013
DIN EN 2847:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD; German and English version EN 2847:2013
DIN EN 2849:2012 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IHRD; German and English version prEN 2849:2012
DIN EN 2849:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD; German and English version EN 2849:2013
DIN ISO 18898:2009 Rubber - Calibration and verification of hardness testers (ISO 18898:2006);English version of DIN ISO 18898:2009-10
DIN ISO 48-8:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN EN 2845:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD; German and English version EN 2845:2013
DIN ISO 48-2:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD (ISO 48-2:2018)
DIN EN 2568:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD; German and English version EN 2568:2019
DIN EN 2566:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD; German and English version EN 2566:2019
DIN EN 2567:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD; German and English version EN 2567:2019
DIN EN 2261:1995-11 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995
DIN EN 2259:1995-11 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995
DIN EN 2260:1995-11 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995
DIN EN 2566:2019-08 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD; German and English version EN 2566:2019
DIN EN 2567:2019-08 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD; German and English version EN 2567:2019
DIN EN 2568:2019-08 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD; German and English version EN 2568:2019
DIN ISO 48-4:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN ISO 21509:2015-10 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006); German version EN ISO 21509:2015
DIN EN 3825:2015-03 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD; German and English version EN 3825:2014
DIN EN 3826:2015-12 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD; German and English version EN 3826:2014
DIN EN 3827:2015-12 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3827:2014
DIN EN 3825:2015 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD; German and English version EN 3825:2014

Japanese Industrial Standards Committee (JISC), Rubber hardness

JIS K 6253-2:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)
JIS K 6253:2006 Rubber, vulcanized or thermoplastic -- Determination of hardness
JIS K 6253-3:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-3:2023 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-1:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 1: General guidance
JIS K 6253-4:2012 Rubber, vulcanized or thermoplastic.Determination of hardness.Part 4: IRHD pocket meter method
JIS K 6253-5:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 5: Calibration and verification of hardness testers
JIS K 6253:1997 Hardness testing methods for rubber, vulcanized or thermoplastic

国家市场监督管理总局、中国国家标准化管理委员会, Rubber hardness

GB/T 38243-2019 Rubber—Calibration and verification of hardness testers
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
GB/T 39693.6-2020 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method

GM Europe, Rubber hardness

GME STD 1869-1980 Rubber Hardness conversions Gummi H錼dhetsj鋗f鰎elser English/Swedish

KR-KS, Rubber hardness

KS M ISO 18898-2021 Rubber — Calibration and verification of hardness testers
KS M ISO 27588-2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)

(U.S.) Ford Automotive Standards, Rubber hardness

FORD WSE-M2D412-A-2010 SILICONE (VMQ) RUBBER, 70 IRHD HARDNESS, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***

Taiwan Provincial Standard of the People's Republic of China, Rubber hardness

CNS 3555-2008 Methods of test for hardness of rubber,vulcanized or thermoplastic
CNS 3555-1999 "Methods of test for hardness of rubber, vulcanized or thermoplastic"

RU-GOST R, Rubber hardness

GOST 8.406-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means
GOST 24616-2017 Plastics cellular and foam rubber. Method for determination of hardness
GOST 24616-1981 Plastics celluar and foam rubber. Method for determination of hardness
GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Rubber hardness

GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)

PT-IPQ, Rubber hardness

NP 2918-1988 Rubber, vulcanized Determination of hardness (hardness between 10 and 35 IRHD)
NP 2916-1988 Vulcanized rubbers Determination of hardness (hardness between 30 and 85 IRHD)
NP 2917-1988 Rubber, vulcanized Determination of hardness (hardeness between 85 and 100 IRHD)

American Society for Testing and Materials (ASTM), Rubber hardness

ASTM D2240-05(2010) Standard Test Method for Rubber Property8212;Durometer Hardness

European Committee for Standardization (CEN), Rubber hardness

EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD
EN 2836:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD
EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
EN 2849:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
EN 2104:1996 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
EN 2259:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD
EN 2261:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD
EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
EN 2260:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

CZ-CSN, Rubber hardness

CSN 62 1432-1980 Determination oí frardness o? vulcanized rubber by the meihod Shore D
CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)

Standard Association of Australia （SAA）, Rubber hardness

AS 1683.15.1:2000 Methods of test for elastomers - International rubber hardness

Indonesia Standards, Rubber hardness

SNI ISO 18517:2012 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
SNI ISO 48:2012 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SNI 06-4999-1999 Determination of hardness of vulcanized rubber by shore durometer
SNI 06-1846-1990 Rubber roll hardness for tanning leather machine

European Association of Aerospace Industries, Rubber hardness

AECMA PREN 2566-1995 Aerospace Series Fluorocarbon Rubber (FPM) Hardness 70 IRHD Edition P 1
AECMA PREN 2567-1995 Aerospace Series Fluorocarbon Rubber (FPM) Hardness 80 IRHD Edition P 1
AECMA PREN 2568-1995 Aerospace Series Fluorocarbon Rubber (FPM) Hardness 90 IRHD Edition P 1
AECMA PREN 3826-2006 Aerospace series Fluorosilicone rubber (FVMQ) Hardness 70 IRHD Edition P 1
AECMA PREN 3827-2006 Aerospace series Fluorosilicone rubber (FVMQ) Hardness 80 IRHD Edition P 1
AECMA PREN 3825-2006 Aerospace series Fluorosilicone rubber (FVMQ) Hardness 60 IRHD Edition P 1
AECMA PREN 2110-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 50 IRHD
AECMA PREN 2111-1978 Chloroprene Rubber (CR) Hardness 60 Characteristics Aerospace Series Edition 1
AECMA PREN 2111-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 60 IRHD
AECMA PREN 2112-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 70 IRHD
AECMA PREN 2113-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 80 IRHD

YU-JUS, Rubber hardness

JUS G.S2.526-1984 Plastics and ebonite. Determination of hardness by the ball indentation method
JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness

TR-TSE, Rubber hardness

TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD
TS 2875-1977 Vulcanized Rubbers of Low Hardness (10 To 35IRHD) Determination of Hardness
TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness
TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER

BE-NBN, Rubber hardness

NBN T 31-001-1976 Vulcanized rubbers - Determination of hardness (hardness between 30 and 85 I.R.H.D.)

AENOR, Rubber hardness

UNE-ISO 48:2008 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
UNE-EN 2259:1996 AEROSPACE SERIES. SILICONE RUBBER (VMQ). HARDNESS 50 IRHD.
UNE-EN 2260:1996 AEROSPACE SERIES. SILICONE RUBBER (VMQ). HARDNESS 60 IRHD.
UNE-EN 2261:1996 AEROSPACE SERIES. SILICONE RUBBER (VMQ). HARDNESS 70 IRHD.

未注明发布机构, Rubber hardness

BS EN 2260:1995(1999) Silicone rubber (VMQ) — Hardness 60 IRHD
BS EN 2259:1995(1999) Silicone rubber (VMQ) — Hardness 50 IRHD
BS EN 2104:1996(1999) Acrylonitrile - butadiene rubber (NBR) — Hardness 40 IRHD

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Rubber hardness

PREN 2111-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 60 IRHD
PREN 2113-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 80 IRHD
PREN 2112-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 70 IRHD
PREN 2110-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 50 IRHD
PREN 2567-2016 Aerospace series Fluorocarbon rubber (FKM) Hardness 80 IRHD (Edition P 2)
PREN 2568-2016 Aerospace series Fluorocarbon rubber (FKM) Hardness 90 IRHD (Edition P 2)
PREN 2566-2016 Aerospace series Fluorocarbon rubber (FKM) Hardness 70 IRHD (Edition P 2)

Society of Automotive Engineers (SAE), Rubber hardness

SAE AMS3302G-1990 Silicone Rubber General Purpose 50 Durometer
SAE AMS3301G-1990 Silicone, Rubber General Purpose 40 Durometer
SAE AMS3305H-1990 Silicone, Rubber General Purpose 80 Durometer
SAE AMS3304G-1990 Silicone, Rubber General Purpose 70 Durometer
SAE AMS3303J-1990 Silicone, Rubber General Purpose 60 Durometer
SAE AMS3305J-2014 Silicone@ Rubber General Purpose 80 Durometer

SAE - SAE International, Rubber hardness

SAE AMS3305K-2019 Silicone, Rubber General Purpose 80 Durometer

化学工业部, Rubber hardness

HG/T 2450-1993 Determination of apparent hardness of rubber rollers International rubber durometer method

PL-PKN, Rubber hardness

PN C04203-1987 Rubber Determination of hardnes according to international scais (IRH) in rang? of 10 H- 100 IRHD

ES-UNE, Rubber hardness

UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
UNE-EN 2566:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN 2567:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN 2568:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN 3827:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD (Endorsed by AENOR in February of 2015.)
UNE-EN 3826:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD (Endorsed by AENOR in February of 2015.)
UNE-EN 3825:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD (Endorsed by AENOR in February of 2015.)

VN-TCVN, Rubber hardness

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)

TH-TISI, Rubber hardness

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

Lithuanian Standards Office , Rubber hardness

LST EN 2261-2002 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD
LST EN 2260-2002 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD
LST EN 2259-2001 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD
LST EN 2104-2001 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD

CEN - European Committee for Standardization, Rubber hardness

EN 2566:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD
EN 2567:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD

Aerospace, Security and Defence Industries Association of Europe (ASD), Rubber hardness

ASD-STAN PREN 2567-2016 Aerospace series Fluorocarbon rubber (FKM) Hardness 80 IRHD (Edition P 2)
ASD-STAN PREN 2568-2016 Aerospace series Fluorocarbon rubber (FKM) Hardness 90 IRHD (Edition P 2)
ASD-STAN PREN 2566-2016 Aerospace series Fluorocarbon rubber (FKM) Hardness 70 IRHD (Edition P 2)
ASD-STAN PREN 2107-1989 Aerospace Series Acrylonitrile-Butadiene - Rubber (NBR) Hardness 70 IRHD