ZH
RU
ES

Metal Corrosion Potential Measurement

Metal Corrosion Potential Measurement, Total:223 items.

In the international standard classification, Metal Corrosion Potential Measurement involves: Corrosion of metals, Non-ferrous metals, Iron and steel products, Equipment for the chemical industry, Medical equipment, Linear and angular measurements, Environmental testing, Ferrous metals, Electrical wires and cables, Testing of metals, Insulating materials, Surface treatment and coating, Nuclear energy engineering, Protection against fire, Electrical engineering in general, Road vehicle systems, Power stations in general.

HU-MSZT, Metal Corrosion Potential Measurement

International Organization for Standardization (ISO), Metal Corrosion Potential Measurement

ISO 23449:2020 Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
ISO 22858:2020 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 17474:2012 Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing
ISO 9225:1992 Corrosion of metals and alloys; corrosivity of atmospheres; measurement of pollution
ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
ISO 17093:2015 Corrosion of metals and alloys - Guidelines for corrosion test by electrochemical noise measurements
ISO 17475:2005/cor 1:2006 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1
ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
ISO/FDIS 4631:2023 Corrosion of Metals and Alloys — Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
ISO 12732:2006 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
ISO 18089:2015 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
ISO 11844-3:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
ISO 22910:2020 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
ISO 17918:2015 Corrosion of metals and alloys - Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
ISO 21153:2018 Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
ISO 16429:2004 Implants for surgery - Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
ISO 7539-6:2011 Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
ISO 22848:2021 Corrosion of metals and alloys - Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
ISO 22410:2020 Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
ISO/DIS 7054:2023 Corrosion of metals and alloys - The wiping method for measurements of gases and particles on real structures and equipment
ISO 19280:2017 Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
ISO 4540:1980 Metallic coatings; Coatings cathodic to the substrate; Rating of electroplated test specimens subjected to corrosion tests

German Institute for Standardization, Metal Corrosion Potential Measurement

DIN 50918:2018-09 Corrosion of metals - Electrochemical corrosion tests
DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
DIN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005);English version of DIN EN ISO 17864:2008-07
DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
DIN EN ISO 9225:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012); German version EN ISO 9225:2012
DIN EN ISO 10270:2022-05 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022); German version EN ISO 10270:2022
DIN EN ISO 12732:2008-07 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07
DIN EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006); German version EN ISO 11844-3:2008
DIN EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012); German version EN ISO 9225:2012
DIN EN ISO 11844-3:2020-06 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020); German version EN ISO 11844-3:2020
DIN EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
DIN EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal Corrosion Potential Measurement

GB/T 17899-2023 Corrosion of metals and alloys - Potentiodynamic measurement of pitting potential of stainless steel in sodium chloride solution
GB/T 29088-2012 Corrosion of metals and alloys.Electrochemical potentiokinetic reactivation measurement using the double loop method
GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
GB/T 32550-2016 Corrosion of metals and alloys.Determination of the critical pitting temperature under potentiostatic control
GB/T 19292.3-2003 Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
GB/T 37619-2019(英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 25147-2010 Test method of metal corrosion amount and corrosion rate of chemical cleaning for industrial equipment.Gravimetric method
GB/T 8654.7-1988 Methods for chemical analysis of manganese metal--The potentiometric titration method for the determination of manganese content
GB/T 15072.5-2008 Test method of precious metal alloys.Determination of silver content for gold and palladium alloys.Potentionmeter titration with potassium iodide
GB/T 15072.2-2008 Test method of precious metal alloys.Determination of silver contents for silver alloys.Potentionmeter titration with sodium chloride
GB/T 15072.1-2008 Test method of precious alloys.Determination of gold content for gold ,platinum and palladium alloys.Potentiometric titration using ferrous sulfate

Danish Standards Foundation, Metal Corrosion Potential Measurement

DS/ISO 23449:2020 Corrosion of metals and alloys – Multielectrode arrays for corrosion measurement
DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
DS/EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
DS/EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity
DS/ISO 22848:2021 Corrosion of metals and alloys – Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
DS/EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
DS/IEC/TS 60695-5-3:2004 Fire hazard testing - Part 5-3: Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method

British Standards Institution (BSI), Metal Corrosion Potential Measurement

BS ISO 23449:2020 Corrosion of metals and alloys. Multielectrode arrays for corrosion measurement
BS ISO 22858:2020 Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion
BS EN ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
BS ISO 17474:2012 Corrosion of metals and alloys. Conventions applicable to electrochemical measurements in corrosion testing
20/30382328 DC BS ISO 23449. Corrosion of metals and alloys. Multielectrode arrays for corrosion measurement
BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
BS ISO 17093:2015 Corrosion of metals and alloys. Guidelines for corrosion test by electrochemical noise measurements
BS ISO 15158:2014 Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
19/30367053 DC BS ISO 22858. Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion
PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
BS EN ISO 9225:2012 Corrosion of metals and Alloys. Corrosivity of Atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres
BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS ISO 22910:2020 Corrosion of metals and alloys. Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
BS EN ISO 11844-3:2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Measurement of environmental parameters affecting indoor corrosivity
BS EN ISO 11844-3:2020 Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres - Measurement of environmental parameters affecting indoor corrosivity
BS ISO 18089:2015 Corrosion of metals and alloys. Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
22/30432417 DC BS ISO 4631. Corrosion of Metals and Alloys. Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
19/30367962 DC BS ISO 22910. Corrosion of metals and alloys. Measurement of the Electrochemical Critical Localized Corrosion Temperature (E-CLCT) for Stacked Ti Alloys Fabricated by the Additive Manufacturing Method
22/30419358 DC BS ISO 4905. Corrosion of metals and alloys. Electrochemical test methods. Guideline for electrochemical measurements in high temperature molten salts
BS PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
BS ISO 17918:2015 Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
BS ISO 21153:2018 Corrosion of metals and alloys. Measurement of environmentally assisted small crack growth rate
BS EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
18/30356657 DC BS EN ISO 11844-3. Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres. Part 3. Measurement of environmental parameters affecting indoor corrosivity
BS ISO 22410:2020 Corrosion of metals and alloys. Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
BS EN ISO 7539-9:2021 Tracked Changes. Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
BS ISO 22848:2021 Corrosion of metals and alloys. Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
19/30361534 DC BS ISO 22410. Corrosion of metals and alloys. Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
20/30409944 DC BS EN ISO 7539-9. Corrosion of metals and alloys. Stress corrosion testing. Part 9. Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
23/30439806 DC BS ISO 7054. Corrosion of metals and alloys. The wiping method for measurements of gases and particles on real structures and equipment
BS ISO 19280:2017 Corrosion of metals and alloys. Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
BS EN 60811-604:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of absence of corrosive components in filling compounds
21/30408318 DC BS ISO 3079. A two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions

Korean Agency for Technology and Standards (KATS), Metal Corrosion Potential Measurement

KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 9225:2003 Corrosion of metals and alloys－Corrosivity of atmospheres－Measurement of pollution
KS D ISO 9225:2018 Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D 0290-2009 Soil resistivity measurement procedure for corrosivity estimation of buried metal structure
KS D 0290-2018 Soil resistivity measurement procedure for corrosivity estimation of buried metal structure
KS P ISO 16429-2010(2016) Implants for surgery－Measurements of open-circuit potential to assess corrosion behaviour of etallic implantable materials and medical devices over extended time periods
KS D ISO 22910:2021 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature(E-CLCT) for Ti alloys fabricated via the additive manufacturing method
KS P ISO 16429:2010 Implants for surgery－Measurements of open-circuit potential to assess corrosion behaviour of etallic implantable materials and medical devices over extended time periods
KS D ISO 7539-6:2019 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
KS P ISO 16429:2021 Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
KS D 0280-2005 Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys
KS D 0280-2020 Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys
KS D ISO 19280:2018 Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
KS C IEC 60811-604:2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds
KS C IEC 60811-604-2016(2021) Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds

KR-KS, Metal Corrosion Potential Measurement

KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 9225-2018(2023) Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
KS D ISO 9225-2018 Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
KS D 0290-2018(2023) Soil resistivity measurement procedure for corrosivity estimation of buried metal structure
KS D ISO 22910-2021 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature(E-CLCT) for Ti alloys fabricated via the additive manufacturing method
KS D ISO 7539-6-2019 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
KS P ISO 16429-2021 Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
KS D ISO 19280-2018 Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
KS C IEC 60811-604-2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds
KS D ISO 19280-2018(2023) Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution

Association Francaise de Normalisation, Metal Corrosion Potential Measurement

NF A05-129*NF ISO 17093:2015 Corrosion of metals and alloys - Guidelines for corrosion test by electrochemical noise measurements
NF A05-119*NF EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
NF A05-327*NF ISO 17474:2012 Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing
NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
NF A05-207*NF ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
FD A05-313*FD ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
NF A05-172*NF ISO 18089:2016 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
NF G62-604*NF EN ISO 22775:2005 Footwear - Test methods for accessories : metallic accessories - Corrosion resistance
NF A05-307-3*NF EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3 : measurement of environmental parameters affecting indoor corrosivity
NF A05-326*NF EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
NF A05-014*NF ISO 19280:2019 Corrosion of metals and alloys - Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
NF EN 60811-604:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 604 : essais physiques - Mesure de l'absence de composants corrosifs dans les matières de remplissage
NF C32-011-604*NF EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604 : physical tests - Measurement of absence of corrosive components in filling compounds

CZ-CSN, Metal Corrosion Potential Measurement

CSN ISO 9225:1994 Corrosion of metals and alloys.Corrosivity of atmospheres.Measurement of pollution
CSN 03 8368-1989 Measuring principles at corrosion prevention of earth placed metallic devices. Contact resistance measuring of cables or pipelines against earth
CSN 03 8366-1992 Measuring principles at corrosion prevention of earth placed metallic devices. Potencial measurings
CSN 03 8364-1978 Measurmg principles at corrosion prevention of earth placed metallic devices. Intensity and direction currents measuring at metallic devices.
CSN ISO 3892:1992 Corrosion protection. Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
CSN 03 8367-1978 Measuring; prineiples at eorrosion prcvention of earlh placcd melallicdevices. Intensily delermination of output (input) enrrent from (to) melallic devices.
CSN 03 8360-1978 Measuring principles at corrosion prevention of earth placed metallic devices.Common regulations.
CSN 34 7010 Cast.77-1972 Tests on antieorosion protective coverings of metallic cable sheats
CSN 03 8363-1978 Measuring principles at corrosion prevention of earth placed metallic devices. Apparent soil resistivity measuring by Wenner method
CSN 03 8365-1987 Measuring principles at corrosion prevention of earth placed metallic devices. Determination of vagabond currents presence in earth
CSN 42 0890 Cast.8-1981 Testing of metal powders. Determination of water content in metal powders by elektrometric titration
CSN 03 8165-1985 Protection against corrosion. Electrode-posited metallic coatings. Methods for testing adhesion
CSN 03 8157-1984 Protective against corrosion. Metallic and non-metallic coatings. Measurement of thickness by non-destructive methods. General demands
CSN 03 8361-1990 Principles of measuring the corrosion prevention of earth placed metallic devices. Soil and water physicochemical analysis

European Committee for Standardization (CEN), Metal Corrosion Potential Measurement

EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)
EN ISO 4540:1995 Metallic Coatings - Coatings Cathodic to the Substrate - Rating of Electroplated Test Specimens Subjected to Corrosion Tests Superseded by EN ISO 10289:2001

国家市场监督管理总局、中国国家标准化管理委员会, Metal Corrosion Potential Measurement

GB/T 40299-2021 Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing
GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 19292.3-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 3: Measurement of environmental parameters affecting corrosivity of atmospheres

Lithuanian Standards Office , Metal Corrosion Potential Measurement

LST EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
LST EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
LST EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
LST EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)
LST EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)
LST EN 60811-604-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds (IEC 60811-604:2012)

AENOR, Metal Corrosion Potential Measurement

UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
UNE 112022:1993 METALLIC COATINGS. ELECTRODEPOSITED CHROMIUM COATINGS. ELECTROLYTIC CORROSION TESTING (EC TEST).
UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
UNE-EN ISO 11844-3:2009 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)
UNE-EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds

American Society for Testing and Materials (ASTM), Metal Corrosion Potential Measurement

ASTM G69-97(2003) Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G192-08(2020)e1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G61-86(2009) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
ASTM F2111-22 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM F2129-17b Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-19 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-17a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-15 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-19a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-17 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM B651-83(2001) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
ASTM B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2015) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM F2129-03 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM F2129-01 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-04 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-06 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

ES-UNE, Metal Corrosion Potential Measurement

UNE-EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012) (Endorsed by AENOR in March of 2012.)
UNE-EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) (Endorsed by AENOR in June of 2008.)
UNE-EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
UNE-EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)

Japanese Industrial Standards Committee (JISC), Metal Corrosion Potential Measurement

JIS G 0577:1981 Method of pitting potential measurement for stainless steels
JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement

Group Standards of the People's Republic of China, Metal Corrosion Potential Measurement

T/CNS 16-2020 Determination of corrosion loss of metals and alloys in liquid lead alloys

PL-PKN, Metal Corrosion Potential Measurement

PN H04623-1986 Corrosion protection Thickness measurement of metallic coatings by the nondestructive methods

Shaanxi Provincial Standard of the People's Republic of China, Metal Corrosion Potential Measurement

DB61/T 1582-2022 Technical specifications for electrochemical testing of metal corrosion in oil and gas fields

国家食品药品监督管理局, Metal Corrosion Potential Measurement

YY/T 1552-2017 Open circuit potential measurement method for evaluating long-term corrosion behavior of metallic implant materials and medical devices in surgical implants

BE-NBN, Metal Corrosion Potential Measurement

RU-GOST R, Metal Corrosion Potential Measurement

GOST R 9.317-2010 Unified system of corrosion and ageing protection. Metallic coatings. Methods of measuriment of ductility
GOST IEC 60811-604-2016 Electric and optical fibre cables. Test methods for non-metallic materials. Part 604. Physical tests. Measurement of absence of corrosive components in filling compounds
GOST R 50.05.03-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination and thickness measurement of monometal, bimetal, and corrosion-resistant cladding

GOSTR, Metal Corrosion Potential Measurement

GOST 34597-2019 Anodic earthing of the electrochemical protective installations against corrosion of underground metal constructions. Methods for determining the biocorrosion aggressiveness of soils and their impact on underground metal constructions

RO-ASRO, Metal Corrosion Potential Measurement

STAS 1125/5-1983 Metal welding COVERED ELECTRODES FOR CORROSION AND HEAT RESISTING STEELS WELDING Types and quality technical requirements

European Committee for Electrotechnical Standardization（CENELEC）, Metal Corrosion Potential Measurement

EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
EN 62321-7-1:2015 Determination of certain substances in electrotechnical products - Part 7-1: Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method

CU-NC, Metal Corrosion Potential Measurement

NC 12-04-29-1988 Standards System for Protoction Against Corrosion. Electrolytic Metallie Coatings. Method- of Decermination of Internal Stress

Professional Standard - Non-ferrous Metal, Metal Corrosion Potential Measurement

YS/T 372.1-2006 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide
YS/T 372.1-1994 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide
YS/T 372.14-2006 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate
YS/T 372.14-1994 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate

International Electrotechnical Commission (IEC), Metal Corrosion Potential Measurement

IEC 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds

Professional Standard - Electricity, Metal Corrosion Potential Measurement

DL/T 1151.21-2012 Analytical methods of scale and corrosion products in power plants.Part 21: determination of metal-element content.inductively coupled plasma atomic emission spectroscopy(ICP-AES)