ZH
RU
ES

Body

Body, Total:499 items.

In the international standard classification, Body involves: Fuels, Rotating machinery, Petroleum, petroleum products and natural gas handling equipment, Fertilizers, Plastics, Paint ingredients, Protection of and in buildings, Materials for the reinforcement of composites, Insulating fluids, Conducting materials, Paint coating processes, Farming and forestry, Materials for aerospace construction, Cutting tools, Ceramics, Raw materials for rubber and plastics, Protection against fire, Environmental protection, Road vehicles in general, Refractories, Medical equipment, Test conditions and procedures in general, Fluid storage devices, Office machines, Insulating materials, Pipeline components and pipelines, Paints and varnishes, Rubber, Mechanical testing, Nuclear energy engineering, Petroleum products in general, Animal feeding stuffs, Installations in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Valves, Non-ferrous metals, Iron and steel products, Non-metalliferous minerals, Beverages, Rubber and plastics products, Construction materials, Domestic, commercial and industrial heating appliances, Earthworks. Excavations. Foundation construction. Underground works, Magnetic materials, Components for electrical equipment, Radiocommunications, Equipment for the chemical industry, Internal combustion engines, Non-textile floor coverings, Equipment for entertainment, Sports equipment and facilities, Electrical wires and cables, Optics and optical measurements, Reinforced plastics, Natural gas, Alarm and warning systems, Tobacco, tobacco products and related equipment, Products of the chemical industry, Products of non-ferrous metals, Spices and condiments. Food additives, Semiconducting materials, Wastes, Processes in the food industry, Cellular materials, Capacitors, Ferrous metals, Electrical engineering in general, Protection against electric shock, Coatings and related processes used in aerospace industry, Farm buildings, structures and installations, Agricultural machines, implements and equipment, Powder metallurgy, Vocabularies.

RO-ASRO, Body

STAS 1753/1-1990 Abrasive materials for abrasive bodies. Granules. grains
STAS SR ISO 3915:1981 Plastics. Measurement of resistivity of conductive plastics
STAS 6107-1981 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for volume and sur- face resistivity and of insution resistance
STAS 3317-1967
STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS 5269-1982 SOLID FUKLS Dilcrinipiation of cnloric valuo
STAS SR 5267-1995 Solid mineral fuels. Humic acids determination. Voiumetrical method

German Institute for Standardization, Body

DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN ISO 171:2000 Plastics - Determination of bulk factor of moulding materials (ISO 171:1980)
DIN 18219:2022-02 Corrosion protection of steel structures and their fasteners in drywall by coating systems - Laboratory tests for the evaluation of coating systems / Note: Date of issue 2022-01-07
DIN ISO 171:2023 Plastics - Determination of bulk factor of moulding materials (ISO 171:2022); Text in German and English
DIN ISO 171:2023-08 Plastics - Determination of bulk factor of moulding materials (ISO 171:2022)
DIN SPEC 1122:2010 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
DIN EN 15103:2010 Solid biofuels - Determination of bulk density; German version EN 15103:2009
DIN 66399-2:2012 Office machines - Destruction of data carriers - Part 2: Requirements for equipment for destruction of data carriers
DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
DIN 51719:1997 Testing of solid fuels - Solid mineral fuels - Determination of ash content
DIN EN ISO 21912:2021-07 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021); German version EN ISO 21912:2021
DIN 58762-2:2015-12 Production in optical engineering - Sintered diamond abrasive body - Part 2: Pellets and grinding pins
DIN CEN/TS 17755:2022-07 Inorganic fertilizers - Determination of specific parameters; German version CEN/TS 17755:2022
DIN EN ISO 24346:2012 Resilient floor coverings - Determination of overall thickness (ISO 24346:2006); German version EN ISO 24346:2012
DIN EN 12059:2008 Natural stone products - Dimensional stone work - Requirements; English version of DIN EN 12059:2008-06
DIN EN 12059:2012 Natural stone products - Dimensional stone work - Requirements; German version EN 12059:2008+A1:2011
DIN 51719:1997-07 Testing of solid fuels - Solid mineral fuels - Determination of ash content
DIN 58762-1:2021-06 Production in optical engineering - Sintered diamond abrasive body - Part 1: Grinding lips for cup wheels - Dimensions
DIN 53165:2019-01 Testing of pigments and extenders - Determination of the relative scattering power of white pigments for different pigment volume concentrations (PVC) - Grey paste method
DIN CEN/TS 17627:2021-07 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021); German version EN ISO 21912:2021
DIN 55992-2:1999-10 Determination of a parameter for the dust formation of pigments and extenders - Part 2: Dropmethod
DIN 55992-1:2006-06 Determination of a parameter for the dust formation of pigments and extenders - Part 1: Rotation method
DIN 1340:1990-12 Gaseous fuels and other gases; types, constituents, application
DIN EN ISO 4895:2014-11 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014); German version EN ISO 4895:2014
DIN IEC 60093:1993 Methods of test for insulating materials for electrical purposes; volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980); German version HD 429 S1:1983
DIN EN ISO 787-5:1995 General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980); German version EN ISO 787-5:1995
DIN 51894:2012 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
DIN 1340:1990 Gaseous fuels and other gases; types, constituents, application
DIN 11622-22:2015 Silage and liquid manure containers, containers in biogas plants, bunker silos and trench silos - Part 22: Concrete blocks acting as lost formwork for silage and liquid manure containers, bunker silos and trench silos and liquid manure channels
DIN EN ISO 1675:2023-03 Plastics - Liquid resins - Determination of density by the pycnometer method (ISO 1675:2022); German version EN ISO 1675:2022
DIN CEN/TS 17751:2022-07 Inorganic fertilizers - Determination of specific parameters in ammonium nitrate fertilizers of high nitrogen content; German version CEN/TS 17751:2022
DIN EN ISO 787-3:2001-09 General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000); German version EN ISO 787-3:2000
DIN 3339:1984 Valves; body component materials
DIN EN ISO 9514:2019-10 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019); German version EN ISO 9514:2019

CZ-CSN, Body

CSN 35 0847-1965 Rotating electrical machines. Commutators with plastic body
CSN 06 1416-1976 Warming systems for solid fuel, liquid fuel and gas fuel washing machines
CSN 38 5550-1984 Odorization of fuel gases
CSN ON 72 7119-1966
CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
CSN 72 2629-1987 Brick products for vertical structures. Per- forated bricks for raw masonry
CSN 44 1315-1975 Storage of solid fuels

YU-JUS, Body

JUS B.B8.049-1984 Mineral aggregate. Determination of voluini-tnc coefficient
JUS M.C5.019-1992 Valves,body materials

CEN - European Committee for Standardization, Body

EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 787-22:2017 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments

International Organization for Standardization (ISO), Body

ISO 21809-3:2016/Amd 1:2020 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1: Introduction of mesh-ba
ISO 17828:2015 Solid biofuels - Determination of bulk density
ISO 171:1980 Plastics; Determination of bulk factor of moulding materials
ISO 171:2022 Plastics — Determination of bulk factor of moulding materials
ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels
ISO 15814:1999 Implants for surgery - Copolymers and blends based on polylactide - In vitro degradation testing
ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
ISO 787-25:1993 General methods of test for pigments and extenders; part 25: comparison of the colour, in full-shade systems, of white, black and coloured pigments; colorimetric method
ISO 8606:1990 Plastics; prepregs; bulk moulding compound (BMC) and dough moulding compound (DMC); basis for a specification
ISO 1675:1975 Plastics — Liquid resins — Determination of density by the pyknometer method
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
ISO 787-5:1980 General methods of test for pigments and extenders; Part 5 : Determination of oil absorption value
ISO 8780-1:1990 Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 1: introduction
ISO 1675:2022 Plastics — Liquid resins — Determination of density by the pycnometer method
ISO 787-1:1982 General methods of test for pigments and extenders; Part 1 : Comparison of colour of pigments
ISO 8781-3:1990 Pigments and extenders; methodes of assessment of dispersion characteristics; part 3: assessment from the change in gloss
ISO/TR 21624:2020 Nanotechnologies — Considerations for in vitro studies of airborne nano‐objects and their aggregates and agglomerates (NOAA)

HU-MSZT, Body

United States Navy, Body

NAVY MIL-PRF-23236 D-2009 COATING SYSTEMS FOR SHIP STRUCTURES
NAVY QPL-81903-QPD-2010 REMOVER, ACID ACTIVATED, FOR AMINE-CURED EPOXY COATING SYSTEMS
NAVY QPL-81903-2012 REMOVER, ACID ACTIVATED, FOR AMINE-CURED EPOXY COATING SYSTEMS

Korean Agency for Technology and Standards (KATS), Body

KS M ISO 5311:2006 Fertilizers-Determination of bulk density(tapped)
KS M ISO 5311:2013 Fertilizers－Determination of bulk density(tapped)
KS M ISO 3944:2006 Fertilizers-Determination of bulk density(loose)
KS M ISO 3944:2013 Fertilizers－Determination of bulk density(loose)
KS M ISO 17828:2021 Solid biofuels — Determination of bulk density
KS L 6509-2000 Testing method for bulk density of artificial abrasives
KS M 6773-2014 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS M 6773-2014(2019) Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS F 4920-2004 Liquid-applied compounds forwaterproofing membrane coating of exterior wall
KS D 3631-2020 Carbon steel pipes for fuel gas piping
KS D 3631-1999 Carbon steel pipes for fuel gas piping
KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS D 3631-2009 Carbon steel pipes for fuel gas piping
KS C IEC 60093:2004 Methods of test for volume resistivity and surface resistivity of solid electric insulating materials
KS M 2651-2006 Solid fuel
KS M 2651-2006(2011) Solid fuel
KS M 2651-1994 Solid fuel
KS M ISO 8606:2006 Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS M ISO 1675:2022 Plastics — Liquid resins — Determination of density by the pyknometer method
KS M 3070-2011 Testing method for melt flow rate of thermoplastics
KS C 6448-1983(1998) RELIABILITY ASSURED PLASTIC FILM CAPACITORS (CHARACTERISTIC M)
KS F 2271-2021 Testing method for gas toxicity of finish materials of buildings
KS F 2271-1998 Testing method for gas toxicity of finish materials of buildings
KS M 3070-1986 Testing method for melt flow rate of thermoplastics
KS F 2271-1986 Testing method for gas toxicity of finish materials of buildings
KS C 6448-1983 RELIABILITY ASSURED PLASTIC FILM CAPACITORS (CHARACTERISTIC M)
KS C IEC TS 62607-6-1:2022 Nanomanufacturing — Key control characteristics — Part 6-1: Graphene-based material — Volume resistivity: four probe method
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS M ISO 8618-2002(2007) Plastics－Liquid phenolic resins－Conventional determination of non－volatile matter

Indonesia Standards, Body

SNI 06-0427-1989 Plastic materials, Determination of bulk density
SNI 06-1544-1989 Solid pigmen preparation for plastic
SNI 13-4696-1998 Quality requirement for urea fertilizer carrier

SSPC - The Society for Protective Coatings, Body

PS 2.00-1995 Guide for Selecting Alkyd Painting Systems
PS 28.02-2010 Three-Coat Moisture-Cured Polyurethane Coating System@ Performance-Based
PS GUIDE 2.00-1982 Guide for Selecting Alkyd Painting Systems (Editorial Changes September 1@2000)

Association Francaise de Normalisation, Body

NF X34-105:2010 Solid biofuels - Determination of bulk density.
NF U42-401*NF EN 1236:1995 Fertilizers. Determination of bulk density (loose).
NF X34-105*NF EN ISO 17828:2016 Solid biofuels - Determination of bulk density
NF X34-112:2011 Solid biofuels - Determination of particle density.
NF M03-049:1992 Solid fuels. Characterization of the solid fuels fixed bed combustion. Pot-furnace method.
NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
NF X34-231*NF EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels
NF EN ISO 21912:2021 Combustibles solides de récupération - Sécurité de la mise en œuvre et du stockage de combustibles solides de récupération
NF T34-722:2015 Paints and varnishes - Coating material and coating systems for exterior masonry and concrete - Façade coatings classification
NF M07-031:1965 Liquid fuels. Determination of sulphur in liquid petroleum products. Lamp method.
NF EN 60426:2016 Matériaux isolants électriques - Détermination de la corrosion électrolytique en présence de matériaux isolants - Méthodes d'essais
NF EN ISO 3915:2022 Plastiques - Mesurage de la résistivité des plastiques conducteurs
XP CEN/TS 17755:2022 Engrais inorganiques - Détermination des paramètres spécifiques
NF D35-301:1991 Chauffage - Combustibles solides - Appareils de chauffage à combustible minéral solide (poêles métalliques amovibles - Foyers complémentaires de cuisine)
NF P94-061-2:1996 Sols : reconnaissance et essais - Détermination de la masse volumique d'un matériau en place - Partie 2 : méthode au densitomètre à membrane.
NF E29-751:2002 Transportable gas cylinders - Fully wrapped composite cylinders.
NF D30-002:1989 HEATING. GAS. LIQUID FUER,SOLID FUEL. HOT WATER BOILERS FOR CENTRAL HEATINGS. CONVENTIONNAL EFFICIENCY.
NF F62-001-1:1991 Matériel roulant ferroviaire - Microdisjoncteurs magnétothermiques à maximum de courant pour circuits de commande et d'auxiliaires - Généralités et essais.
NF T30-501:1976 Thermo-setting powder paints. Determination of fluidization.
NF EN ISO 6801:2021 Tuyaux en caoutchouc ou en plastique - Détermination de l'expansion volumique
NF EN 14233:2003 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Détermination de la température des matières plastiques et objets à l'interface matières plastiques/denrées alimentaires lors du chauffage en four classique ...
NF F80-103:1989 Matériel roulant ferroviaire - Aciers d'usage recommandé pour la construction du matériel roulant ferroviaire - III - Aciers de construction à résistance améliorée à la corrosion atmosphérique (aciers au cuivre).
NF EN ISO 105-X02:1996 Textiles - Essais de solidité des teintures - Partie X02 : solidité des teintures au carbonisage : acide sulfurique.
NF EN ISO 8989:1998 Plastiques - Résines phénoliques liquides - Détermination de la tolérance à l'eau.
NF EN ISO 105-X01:1996 Textiles - Essais de solidité des teintures - Partie X01 : solidité des teintures au carbonisage : chlorure d'aluminium.
NF EN ISO 105-X05:1997 Textiles - Essais de solidité des teintures - Partie X05 : solidité des teintures aux solvants organiques.
NF R81-101:1980 Rigid cellular plastics. Determination of dimensional variations on immersion in fluids.
NF EN ISO 1675:2022 Plastiques - Résines liquides - Détermination de la masse volumique par la méthode du pycnomètre
NF EN ISO 4895:2014 Plastiques - Résines époxydes liquides - Détermination de la tendance à la cristallisation
NF E29-789:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders.
NF T57-530:1991 Plastics. Prepregs. Bulk moulding compound (bmc) and dough moulding compound (dmc). Basis for a specification.
NF M07-014:1974 LIQUID FUELS. DETERMINATION OF LEAD CONTENT OF GASOLINE. VOLUMETRIC CHROMATE METHOD. (EUROPEAN STANDARD EN 13).
NF ISO 3013:1997 Produits pétroliers - Détermination du point de disparition des cristaux des carburants aviation
NF E31-401:1982 GAS-FIRED RADIATORS PANELS.

British Standards Institution (BSI), Body

BS EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers
BS EN ISO 7837:1992 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers
BS EN ISO 17828:2015 Solid biofuels. Determination of bulk density
BS EN 15103:2010 Solid biofuels. Determination of bulk density
BS EN 15103:2009 Solid biofuels - Determination of bulk density
BS EN 1236:1995 Fertilizers - Determination of bulk density (loose)
BS DD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
BS DD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
BS EN 1237:1995 Fertilizers - Determination of bulk density (tapped)
BS ISO 171:2022 Tracked Changes. Plastics. Determination of bulk factor of moulding materials
BS EN ISO 21912:2021 Solid recovered fuels. Safe handling and storage of solid recovered fuels
BS 2782-6 Method 621C:1983 Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials
PD CEN/TS 17755:2022 Inorganic fertilizers. Determination of specific parameters
20/30354912 DC BS EN ISO 21912. Solid recovered fuels. Safe handling and storage of solid recovered fuels
BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN ISO 18847:2016 Solid biofuels. Determination of particle density of pellets and briquettes
PD IEC TS 62607-6-1:2020 Nanomanufacturing. Key control characteristics. Graphene-based material. Volume resistivity: four probe method
BS EN 12059:2008 Natural stone products - Dimensional stone work - Requirements
BS EN 12059:2008+A1:2011 Natural stone products. Dimensional stone work. Requirements
BS EN 12059:2008+A1:2011(2012) Natural stone products. Dimensional stone work. Requirements
BS ISO 14309:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
BS 5551-2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS ISO 4895:1998 Plastics. Liquid epoxy resins. Determination of tendency to crystallize
BS EN ISO 8989:1998 Plastics. Liquid phenolic resins. Determination of water miscibility
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
BS 1212-3:1990 Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
BS EN 13900-6:2012 Pigments and extenders. Methods of dispersion and assessment of dispersability in plastics. Determination by film test
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
PD CEN/TS 17772:2022 Organic and organo-mineral fertilizers. Determination of specific parameters
PD CEN/TS 17751:2022 Inorganic fertilizers. Determination of specific parameters in ammonium nitrate fertilizers of high nitrogen content

TR-TSE, Body

TS 189-1965 DETERMINAT?ON OF BULK FACTOR OF MOULDING MATERIAUS
TS 144-1964 LIQUID PAINT DRIERS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Body

GB/T 8324-1987 Test method for bulk factor of moulding materials
GB/T 8324-2008 Plastics.Determination of bulk factor of moulding materials
GB/T 6154-1985 Carbon materials--Determination of the bulk density
GB/T 24528-2009 Carbon materials-Determination method of the bulk density
GB/T 30790.5-2014 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 5: Protective paint systems
GB/T 2413-1980 Piezoelectric ceramic materials--Measuring methods for determination of volume density
GB/T 2413-1981 Piezoelectric ceramic materials--Measuring methods fordetermination of volume and density
GB 2413-1981 Measurement method of bulk density of piezoelectric ceramic materials
GB 2413-1980 Measurement method of bulk density of piezoelectric ceramic materials
GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
GB/T 25819-2023 dye liquid reactive black
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1410-1989 Methods of test for volume resistivity and surface resistivity of solid insulating materials
GB/T 1725-1979 Methods of test for non-volatile matter of varnishes,paints and their vehicles
GB/T 13376-2008 Plastic scintillators
GB/T 13376-1992 Plastic scintillators
GB/T 29602-2013 Solid beverages
GB/T 1864-2012 General methods of test for pigments and extenders.Comparison of colour of pigments
GB/T 20033.2-2005 Technical requirements and test methods for artificial material sports fields Part 2: Tennis court
GB/T 19995.3-2006 Technical requirements and test methods for natural material sports field. Part 3: Ice rink
GB/T 3048.3-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of volumeresistivity of semi-conducting rubbers and plastics
GB/T 31415-2015 Paints and varnishes.Performance requirements for protective paint systems for offshore and related structures
GB/T 30790.1-2014 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 1:General introduction
GB/T 19995.2-2005 Technical requirements and methods for natural material sport fields Part 2: Wooden floor for multipurpose gymnasium
GB 16663-1996 Alcohol base liquid fuel
GB/T 18968-2003 Terms of wall materials
GB/T 3048.3-2007 Test methods for electrical properties of electric cables and wires.Part 3: Test of volume resistivity of semi-conducting rubbers and plastics
GB/T 30790.2-2014 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 2:Classification of environments
GB/T 30790.3-2014 Paints and varnishes.Corrosion protection of steel structures by protective paint systems.Part 3: Design considerations
GB/T 5211.15-2014 General methods of test for pigments and extenders.Part 15:Determination of oil absorption value
GB/T 15223-2008 Plastics.Liquid resins.Determination of density by the pyknometer method
GB/T 19995.1-2005 Technical requirements and methods for natural material sport fields Part 1:Grassed surface for football fields
GB/T 20033.3-2006 Technical requirements and test methods for artificial material sport fields. Part 3: Artificial turf surface for football fields
GB/T 5211.3-2020 General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃
GB/T 21868.1-2008 Pigments and extenders.Methods of dispersion for assessment of dispersion characteristics.Part 1:Introduction
GB/T 14264-1993 Semiconductor materials-Terms and definitions
GB/T 14264-2009 Semiconductor materials-Terms and definitions
GB/T 31416-2015 Paints and varnishes.Determination of the pot-life of multicomponent coating systems.Preparation and conditioning of samples and guidelines for testing

Danish Standards Foundation, Body

DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
DS/EN 1236:1996 Fertilizers - Determination of bulk density (loose)
DS/CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
DS/EN 15103:2010 Solid biofuels - Determination of bulk density
DS/ISO 21912:2021 Solid recovered fuels – Safe handling and storage of solid recovered fuels
DS/EN 13300:2001 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification
DS/CEN/TS 16359:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings
DS/EN ISO 21912:2021 Solid recovered fuels – Safe handling and storage of solid recovered fuels (ISO 21912:2021)
DS/IEC 93:1982 Methods of test for volume resistivity of solid electrical insulating materials
DS/CEN/TS 17627:2021 Plastics – Recycled plastics – Determination of solid contaminants content
DS/EN ISO 8989:1999 Plastics - Liquid phenolic resins - Determination af water miscibility
DS/EN ISO 787-5:1995 General methods of test for pigments and extenders - Part 5: Determination of oil absorption value
DS/ISO 787-2:2021 General methods of test for pigments and extenders – Part 2: Determination of matter volatile at 105 °C
DS/EN ISO 9514:2005 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing

European Committee for Standardization (CEN), Body

EN 15103:2009 Solid biofuels - Determination of bulk density
PD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
EN ISO 21809-3:2016/A1:2020 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
EN 1503-4:2016 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
EN ISO 24346:2012 Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)
EN 12059:2008 Natural stone products - Dimensional stone work - Requirements (Incorporates Amendment A1: 2011)
EN 14780:2011 Solid biofuels - Sample preparation
CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
PD CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
EN ISO 8989:1995 Plastics - Liquid Phenolic Resins - Determination of Water Miscibility (ISO 8989 : 1988)
EN 1815:2016 Resilient and laminate floor coverings - Assessment of static electrical propensity
EN ISO 787-1:2017 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments

RU-GOST R, Body

GOST R 54191-2010 Solid biofuels. Determination of bulk density
GOST R 54225-2010 Solid recovered fuels. Determination of bulk density
GOST R 54225-2010(2019) Solid recovered fuels. Determination of bulk density
GOST R 54202-2010 Resources conservation. Gaseous fuel. Best available techniques in gaseous fuel combustion
GOST R 59675-2021 Synthetic absorbable implantable surgical materials. In vitro degradation testing
GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
GOST R 55987-2014 Feeds and raw material for mixed feeds. Method for determination of digestibility of feather meal in vitro
GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
GOST 5542-2014 Natural fuel gases for commercial and domestic use. Specifications
GOST R 53656.2-2009 Plastics. Determination of gas-transmission rate. Part 2. Equal-pressure method
GOST 11878-1966 Austenitic steel bars. Methods for the determination of the ferrite-phase

Lithuanian Standards Office , Body

LST EN 15103-2010 Solid biofuels - Determination of bulk density
LST EN 13300-2002 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification
LST EN 13300-2002/AC-2004 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification
LST EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
LST HD 429 S1-2002 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980)
LST CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
LST 1986-2007 Solid fuel - Fuel peat

KR-KS, Body

KS M ISO 17828-2021 Solid biofuels — Determination of bulk density
KS F 2371-2022 Standard test method for bulk density of granular insulations
KS M ISO 1675-2022 Plastics — Liquid resins — Determination of density by the pyknometer method
KS C IEC TS 62607-6-1-2022 Nanomanufacturing — Key control characteristics — Part 6-1: Graphene-based material — Volume resistivity: four probe method
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

FI-SFS, Body

SFS-ISO 171 E:1986 This standard is approved in English
SFS 2943-1973

ZA-SANS, Body

SANS 5560:2005 Pigment volume concentration of paints with a non-aqueous solvent base

AENOR, Body

UNE 53016:2014 Plastics. Determination of bulk factor of moulding materials
UNE-EN 13300:2002 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification
UNE 84680:2004 Cosmetic raw materials. Determination of specific density of liquids. Pycnometer method.

Group Standards of the People's Republic of China, Body

T/SCETIA 2001-2022 Determination of water absorption by volume for thermal insulating products
T/CFNA 6511-2022 Bulk Index Test In Spice
T/ZZB 3027-2022 Thermal vibration protective coating system for launch vehicle
T/CFA 010604.6-2018 Test method on three body abrasion of metallic materials
T/CSTM 00639-2022 Performance requirement of protective coatings system for aluminum alloy vehicle frames and related structures
T/CSTM 00632.2-2022 Technical requirement for coatings used in architectural finishing engineering—Part 2: Exterior wall coatings system
T/CSTM 00632.1-2022 Technical requirement for coatings used in architectural finishing engineering—Part 1: Interior wall coatings system
T/CSTM 00632.4-2022 Technical requirement for coatings used in architectural finishing engineering—Part 4: Floor coatings system
T/CBIA 008-2021 solid drink
T/CSTM 00632.3-2022 Technical requirement for coatings used in architectural finishing engineering—Part 3: Inorganic architectural coatings system
T/CAMS /CICEIA109-2022 Internal combustion engine — Plastics housing thermostat assemblies
T/CASME 745-2023 Powder feeding valve
T/BAEE 003-2020 Liquid detergent for clothing
T/FJSP 0010-2020 Freeze-dried solid beverage
T/NAIA 0144-2022 Astragalus solid drink
T/HNZLJC 001-2023 Alcohol-based liquid fuel
T/ZZB 2323-2021 Permanent ferrite powder for injection
T/ZZB 2627-2022 Water-soluble fertilizers containing humic-acids—Solid macronutrient type
T/ZZB 1832-2020 Strontium ferrite powder for bonded magnet
T/MBPA C002-2019 Liquid detergent for babies and children clothes
T/CPQS MBPAC002-2019 Liquid detergent for babies and children clothes
T/NJ 1164-2018 Agriculture and forestry tractors and machinery hard plastic three-dimensional signs
T/BTXT 0001-2017 Group standard for sintered NdFeB permanent magnet materials for motors
T/CNHFA 111.1-2023 General Rules for the Preparation of Group Standards for Health Food Raw Materials (1)
T/GDIFST 003-2022 Kainai Tea
T/GDIFST 004-2022 Qixing Tea
T/HEBQIA 095-2022 PMC new solid fuel

NL-NEN, Body

NEN 5927-1990 Aggregates for concrete - Determination of bulk density

Professional Standard - Ferrous Metallurgy, Body

YB/T 119-1997 Carbon materials.Determination method of the bulk density

American Society for Testing and Materials (ASTM), Body

ASTM D2978-71(1998) Standard Test Method for Volume of Processed Peat Materials
ASTM D2978-15e1 Standard Test Methods for Volume of Processed Peat Materials
ASTM D2978-15 Standard Test Methods for Volume of Processed Peat Materials
ASTM D2978-03 Standard Test Method for Volume of Processed Peat Materials
ASTM D2978-03(2010) Standard Test Method for Volume of Processed Peat Materials
ASTM C357-07(2022) Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C357-07(2022)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C914-09(2022) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C29/C29M-09 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM C29/C29M-23 Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D6095-99 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1796-20 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM D1210-96(2004) Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D1210-96 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM F2818-10(2023) Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM D600-90(1997) Standard Specification for Liquid Paint Driers
ASTM D600-90(2001) Standard Specification for Liquid Paint Driers
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion

Professional Standard-Ships, Body

CB/Z 166-1979 Measurement method of volume resistivity ρv of piezoelectric ceramic materials

International Federation of Trucks and Engines, Body

NAVISTAR TMS 7008-1987 VOID - Polyester Filler, Body

Canadian General Standards Board （CGSB), Body

CGSB 1-GP-71 METH 21.2-1981 Methods of Testing Paints and Pigments Pigment Content Pigment Volume Concentration (PVC)

SE-SIS, Body

SIS SS 2062-1987 Central heating boilers for gaseous fuels, liquid fuels, hard coals or cokes - Testing
SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
SIS SS 424 06 38-1988 Overhead line material -String support
SIS SS 424 06 42-1979 Overhead line material — String support
SIS SS 1985-1987 Central heating boilers for gaseous fuels, liquid fuels, hard coals or cokes - Requirements for working efficiency
SIS SS 404 09 24-1992 Solid insulating materials - Methods of test for electric strength of solid insulating materials
SIS SS 16 28 10-1980 Rubber — Materials for extruded, solid sealing strips
SIS SS-ISO 175:1987 Plastics - Determ i nation of the effects of liquid chemicals, including water
SIS SEN 86 02 02
SIS SEN 86 02 05
SIS 16 18 21-1969 Plastics. Determination of resistance to Liquids
SIS SS 06 05 06-1988 Filler material — Rods for gas-shielded arc welding — Dimensions and tolerances

The American Road & Transportation Builders Association, Body

AASHTO M 323-2007 Standard Specification for Superpave Volumetric Mix Design
AASHTO T19/T19M-2000 Standard Method of Test for Bulk Density ("Unit Weight") and Voids in Aggregate Twentieth Edition; ASTM C29/C29M-97 R(1997)

Society of Automotive Engineers (SAE), Body

SAE AMS-R-81903-2008 Remover, Acid Activated, For Amine-Cured Epoxy Coating Systems
SAE AMS-R-81903A-2021 Remover, Acid Activated, For Amine-Cured Epoxy Coating Systems
SAE AMS-S-8802D-2015 Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities
SAE ARP498A-2001 Design, Layout, Criteria — Plastic Integrally Lighted Panels
SAE AMS3130F-1992 Paint, Vehicle, Glyceryl Phthalate

The Society for Protective Coatings (SSPC), Body

SSPC PS 28.02-2010 Three-Coat Moisture-Cured Polyurethane Coating System, Performance-Based

Professional Standard - Energy, Body

NB/T 47003.2-2009 Silos for solid materials
NB/SH/T 0895-2015 Determination of filter blocking tendency of middle distillate fuels and liquid fuels

International Electrotechnical Commission (IEC), Body

IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
IEC TS 62607-6-1:2020 Nanomanufacturing - Key control characteristics - Part 6-1: Graphene-based material - Volume resistivity: four probe method

IT-UNI, Body

UNI 4270-1959
UNI EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels
UNI 7824-1978
UNI S 7-1941
UNI 7825-1978
UNI S 11-1941
UNI S 10-1941
UNI CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content

Japanese Industrial Standards Committee (JISC), Body

JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS K 6271:2001 Rubber, vulcanized or thermoplastics -- Determination of volume and surface resistivity
JIS C 2139:2008 Solid electrical insulating materials -- Methods for the determination of volume resistivity and surface resistivity
JIS R 2655:2005 Testing method for bulk density of light weight castable refractories (Method for molded goods)
JIS R 2655:1985 Testing method for bulk specific gravity of light weight castable refractories (method for molded goods)
JIS A 1104:1999 Methods of test for bulk density of aggregates and solid content in aggregates
JIS A 1104:2006 Methods of test for bulk density of aggregates and solid content in aggregates
JIS A 1104:2019 Methods of test for bulk density of aggregates and solid content in aggregates
JIS Z 7312:2014 Biosolids Fuel

ES-UNE, Body

UNE-EN ISO 21912:2022 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
UNE 84026:2018 Cosmetic raw materials. Preparation of infrared spectra for solid raw materials
UNE-CEN/TS 17755:2022 Inorganic fertilizers - Determination of specific parameters (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN ISO 9514:2020 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)

U.S. Military Regulations and Norms, Body

ARMY A-A-59464 A-2002 COMMERCIAL ITEM DESCRIPTION PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
ARMY A-A-52460 VALID NOTICE 1-2004 FILTER, FLUID, PRESSURE-AUTOMOTIVE FUEL (21 GPH FILTRATION)
ARMY A-A-52460-1993 FILTER, FLUID, PRESSURE-AUTOMOTIVE FUEL (21 GPH FILTRATION)
ARMY MIL-H-44086 B NOTICE 1-1997 HEATER, WATER, LIQUID FUEL
ARMY MIL-H-44086 B-1992 HEATER, WATER, LIQUID FUEL

Military Standard of the People's Republic of China-General Armament Department, Body

GJB 15.1-1992 Specifications for ship materials Hull materials
GJB 3031-1997 Specification for glass fiber reinforced plastic floats for mine clearance equipment
GJB 3031A-2021 Specification for glass fiber reinforced plastic floats for mine clearance equipment

GOSTR, Body

GOST R 57844-2017 Composites. Determination of density by volumetric displacement - skeleton density by gas pycnometry

National Aeronautics and Space Administration (NASA), Body

NASA UFGS-28 33 00.00 40-2008 FUEL-GAS DETECTION AND ALARM

Jiangxi Provincial Standard of the People's Republic of China, Body

DB36/T 265-1997 Plastic pot rice seedling tray

US-FCR, Body

FCR FED FCGS 07540-1983 ROOFING, FLUID-APPLIED ELASTOMERIC
FCR 40 CFR PART 238-2014 DEGRADABLE PLASTIC RING CARRIERS
FCR 40 CFR PART 238-2015 DEGRADABLE PLASTIC RING CARRIERS
FCR 40 CFR PART 238-2013 DEGRADABLE PLASTIC RING CARRIERS

Standard Association of Australia （SAA）, Body

AS 5200.458:2008 Plumbing and drainage products Part 458: Universal plastic-bodied transition couplings
AS 4796:2001 Water supply - Metal bodied and plastic bodied ball valves for property service connection
AS 4848.1:2019 Application specifications for coating systems, Part 1: Single coat inorganic (ethyl) zinc silicate — Solvent-borne
AS 3496:1995 Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps
AS 4796:2016 Water supply — Metal-bodied and plastic-bodied ball valves for property service connection

AR-IRAM, Body

IRAM 12517-1956

Professional Standard - Agriculture, Body

NY/T 390-2000 Plastic seedling bowls for rice

BELST, Body

STB 2262-2012 Liquefied hydrocarbon fuel gases. Specifications

American National Standards Institute （ANSI), Body

ANSI/AWWA C710-2002 Cold Water Meters - Displacement Type - Plastic Main Case
ANSI/UL 2523-2009 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers
ANSI/ISA 12.13.04*FM 6325-2007 Performance Requirements for Open Path Combustible Gas Detectors
ANSI H35.5-1993 Nomenclature System for Aluminum Metal Matrix Composite Materials
ANSI/ESD STM11.12-2000 Test Method for Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

AT-ON, Body

OENORM EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
ONORM B 5330-10-1997 Doors - Steel cases for gypsum plasterboard walls
ONR CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics

CH-SNV, Body

SN EN ISO 21912:2021 Solid recovered fuels - Safe handling and storage of solid recovered fuels (ISO 21912:2021)
SEV 4011-1964

PL-PKN, Body

PN-EN ISO 21912-2021-08 E Solid recovered fuels -- Safe handling and storage of solid recovered fuels (ISO 21912:2021)
PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
PN H04945-1992 Sintered metal materials. Determination of fluid permeability
PN P04779 ArkusZ03-1975 Asbestos plaited packings Determination of change of mass in liqids
PN M73052-1990 Hydraulic fluids power Compatibility between elastomeric materials and fluids

Professional Standard - Chemical Industry, Body

HG/T 3956~3958-2007 Dye Intermediates (2007)
HG/T 4370-2012 Gas absorption tower with composite material for chemical industry
HG/T 4768.1-2014 Pigments and extenders.Assessment of dispersibility in plastics.Part 1: General introduction
HG/T 4769.1~4769.4-2014 Test of colorants in pigment and extender plasticized polyvinyl chloride (2014)
HG/T 4767.1~4767.4-2014 Tests for the Thermal Stability of Color During Processing of Pigment and Pigment Extender Plastics (2014)
HG/T 20577-2013 Test specification of hydromechanical and mass transfer performance parameters for tower packings

BE-NBN, Body

NBN 52.090-1965
NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics

Taiwan Provincial Standard of the People's Republic of China, Body

CNS 7841-1981 Method of Test for Bulk Density of Artificial Abrasives
CNS 11908-2008 Plastic box and fix plate for low voltage A.C. power meter
CNS 11908-2002 Plastic box for low voltage A.C power meter
CNS 11923-2002 Dried microbe fertilizer

AIA/NAS - Aerospace Industries Association of America Inc., Body

NAS557-1997 Grommet@ Plastic-Split (Rev 6)
NAS557-2011 GROMMET@ PLASTIC@ SPLIT (Rev 7)

SAE - SAE International, Body

SAE ARP498B-2007 Design@ Layout@ Criteria - Plastic Integrally Lighted Panels
SAE ARP498C-2012 Design@ Layout@ Criteria - Plastic Integrally Lighted Panels
SAE AMS3130G-2009 Paint@ Vehicle@ Glyceryl Phthalate

American Society of Mechanical Engineers (ASME), Body

ASME PTC 3.3-1969 Gaseous fuels
ASME B31.2-1968 Fuel gas piping

商务部, Body

SB/T 10947-2012 solid drink

SG-SPRING SG, Body

SS 256-1996 SPECIFICATION FOR Diaphragm Type Float Operated Valves (Plastics Bodied) For Cold Water Services Only (Excluding Floats)

European Committee for Electrotechnical Standardization（CENELEC）, Body

HD 429 S1-1983 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials

Professional Standard - Electron, Body

SJ/T 10412-2002 Permanent ferrite powder
SJ/T 11265-2002 Soft ferrite powder
SJ/T 10412-1993 Permanent magnet ferrite powder
SJ/T 11265-2019 Soft ferrite powder
SJ/T 10410-2002 Permanent ferrite materials
SJ/T 10410-2016 Permanent ferrite materials
SJ/T 10410-1993 Permanent ferrite material

工业和信息化部, Body

SJ/T 10412-2016 Permanent magnet ferrite powder

Defense Logistics Agency, Body

DLA MS500040 REV J REINST NOTICE 3-2006 TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL
DLA MS500040 REV J-1991 TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL

国家药监局, Body

YY/T 1806.2-2021 Methods for evaluation of in vitro degradation properties of biomedical materials Part 2: Mussel mucin
YY/T 1806.1-2021 Evaluation method for in vitro degradation performance of biomedical materials Part 1: Degradable polyesters
YY/T 1680-2020 Evaluation of in vivo osteogenic induction properties of allograft prosthetic materials demineralized bone materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Body

GB/T 33329-2016 Pigments and extenders—Determination of ignition loss and residue on ignition
GB/T 33323-2016 Plastics—Liquid phenolic resins—Determinaiton of water miscibility

IPC - Association Connecting Electronics Industries, Body

IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials

IN-BIS, Body

UY-UNIT, Body

Professional Standard - Tobacco, Body

YC/T 195-2005 Standard system of material for cigarette

Professional Standard - Light Industry, Body

QB/T 1224-2007 Liquid detergent for fabric
QB/T 1224-2012 Liquid detergent for fabric
QB/T 1224-1991 Liquid detergent for clothing
QB/T 3623-1999 Fruit flavor solid drink

Professional Standard - Non-ferrous Metal, Body

YS/T 881-2013 The dominated smelting nickel substrate material

GB-REG, Body

REG 40 CFR PART 238-2011 DEGRADABLE PLASTIC RING CARRIERS

中华全国供销合作总社, Body

GH/T 1281-2020 Standard system table of spices

轻工业部, Body

QB 1224-1991 Liquid detergent for clothing

Professional Standard - Medicine, Body

YY/T 0993-2015 Biological evaluation of medical devices.Nanomaterial: In vitro cytotoxicity tests (MTT assay and LDH assay)

Professional Standard - Petrochemical Industry, Body

SH/T 0093-1991 Jet Fuel Solid Particulate Contamination Method

Professional Standard - Aerospace, Body

QJ 2194-1991 Test method for gas permeability coefficient of organic materials

未注明发布机构, Body

BS EN ISO 1675:1998(1999)*BS 2782-6-Method 620E:1998 Plastics — Liquid resins — Determination of density by the pyknometer method
DIN EN 483 A-2:2002 Gaseous fuel boilers

国家市场监督管理总局、中国国家标准化管理委员会, Body

GB/T 18968-2019 Terms of wall materials
GB/T 40260-2021 Test method for determining gas permeability of polymer membrane materials
GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles

Guizhou Provincial Standard of the People's Republic of China, Body

DB52/T 943-2014 Solid Beverage Ginger Tea

Electrostatic Discharge Association (ESDA), Body

ANSI/ESD STM11.12-2007 Volume Resistance Measurements of Static Dissipative Planar Materials

ESD - ESD ASSOCIATION, Body

STM11.12-2007 Volume Resistance Measurement of Static Dissipative Planar Materials
STM11.12-2015 Volume Resistance Measurement of Static Dissipative Planar Materials

TH-TISI, Body

TIS 1780.1-2000 General methods of test for pigments and extenders.part 1: comparison of colour of pigments
TIS 1780.5-2000 General methods of test for pigments and extenders.part 5: determination of oil absorption value
TIS 1862.1-1999 Pigments and extenders.methods of dispersion for assessment of dispersion characteristics.part 1: introduction

CU-NC, Body

NC 54-79-1986 Construction Materials and Products. Asphaltum Determination of Specific Weight

Professional Standard - Aviation, Body

HB/Z 209-1991 Specification for sampling of samples for gas analysis of metallic materials

U.S. Air Force, Body

AIR FORCE MIL-D-81298 D ADMIN NOTICE 2-2005 DYE, LIQUID FOR THE DETECTION OF LEAKS IN AIRCRAFT FUEL SYSTEMS
AIR FORCE MIL-D-81298 D-1988 DYE, LIQUID FOR THE DETECTION OF LEAKS IN AIRCRAFT FUEL SYSTEMS

AASHTO - American Association of State Highway and Transportation Officials, Body

T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)