ZH
RU
ES

Heat flow meter

Heat flow meter, Total:498 items.

In the international standard classification, Heat flow meter involves: Protection against fire, Geology. Meteorology. Hydrology, Non-destructive testing, Laboratory medicine, Thermodynamics and temperature measurements, Measurement of fluid flow, Industrial automation systems, Linear and angular measurements, Plastics, Analytical chemistry, Aerospace electric equipment and systems, Pharmaceutics, Nuclear energy engineering, Shipbuilding and marine structures in general, Transformers. Reactors, Electricity. Magnetism. Electrical and magnetic measurements, Equipment for petroleum and natural gas industries, Medical equipment, On-board equipment and instruments, Hand-held tools, Hospital equipment, Domestic safety, Protection of and in buildings, Farming and forestry, Rotating machinery, Electrical wires and cables, Quality, Installations in buildings, Power stations in general, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Road engineering, Mining equipment, Valves, Measurement of volume, mass, density, viscosity, Ventilators. Fans. Air-conditioners, Services, Education, Mechanical testing, Electrical equipment for working in special conditions, Graphical symbols, Heat pumps, Refrigerating technology, Elements of buildings, Textile machinery, Natural gas, Aircraft and space vehicles in general, Hydraulic energy engineering, Electronic tubes, Water quality, Power transmission and distribution networks, Petroleum products in general, Equipment for the chemical industry, Electrical and electronic testing, Products of the chemical industry, Metrology and measurement in general, Rubber, Alarm and warning systems, Coals, Electrical engineering in general, Cereals, pulses and derived products, Pipeline components and pipelines, Heat recovery. Thermal insulation, Ergonomics, Construction equipment.


International Organization for Standardization (ISO), Heat flow meter

  • ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
  • ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
  • ISO 14934-2:2006 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
  • ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
  • ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
  • ISO 11443:2005 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
  • ISO 11443:1995 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
  • ISO 3455:1976 Liquid flow measurement in open channels; Calibration of rotating-element current-meters in straight open tanks
  • ISO 11443:2014 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
  • ISO 11443:2021 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
  • ISO 17089-1:2019 Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Heat flow meter

ESDU - Engineering Sciences Data Unit, Heat flow meter

  • ESDU 16002-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 2: Constant-Temperature Anemometry
  • ESDU 17009-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 4: Particle-Image Velocimetry
  • ESDU 17008-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 3: Laser-Doppler Anemometry
  • ESDU 16001-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 1: Overview and Selection of Measurement Technique

工业和信息化部, Heat flow meter

  • JB/T 13939-2020 Non-destructive testing instrument eddy current thickness gauge
  • JB/T 13941-2020 Non-destructive testing instrument far field eddy current detector
  • JB/T 13940-2020 Non-destructive testing instrument eddy current conductivity detector
  • JB/T 5472-2022 Instrument current transformer
  • JB/T 14223-2021 Non-destructive testing instrument Rechargeable AC yoke flaw detector

Professional Standard - Water Conservancy, Heat flow meter

  • SL 340-2006 Recorder for flow velocity and discharge
  • SL/T 186-1997 Ultrasonic current meter
  • SL/T 148.4-1995 Grading of products quality for propeller-type current meter
  • SL/T 148.5-1995 Grading of products quality for cop-type current meter
  • SL 123-1995 Method for calibration of cement mortar flow tester
  • SL/T 208-1998 Instrument for sediment measurement and particle size analysis in open channel
  • SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
  • SL 136-1995 Test method for adiabatic temperature rise tester

AT-ON, Heat flow meter

RO-ASRO, Heat flow meter

  • STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density
  • STAS 3537-1972 Eleetrleal measuring instruments NOMINAL RATINOS. WRRENTS ANI) VOl.TAGES
  • STAS 11071/2-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY F MEASURING INSTRUMENTS FOR FLUID VOLUMES
  • STAS 10647-1976 BOARD FOR PASSENGER CARS Determination of dimensional stability to heat
  • STAS SR ISO 7858-2:1996 Measurement of water flow in closed conduits-Meters for cold potable water - Combination meters Part 2: Installation requirements
  • STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities

National Metrological Verification Regulations of the People's Republic of China, Heat flow meter

Professional Standard - Medicine, Heat flow meter

Professional Standard - Chemical Industry, Heat flow meter

  • HG/T 20559.6-1993 Pipeline instrument flow chart design specifies codes for heat insulation, heat preservation, fire protection and sound insulation of pipeline instrument flow chart
  • HG/T 20559.7-1993 Pipeline instrumentation flow chart design specifies equipment tag number for pipeline instrumentation flow chart
  • HG 20519.5-1992（编制说明） Piping and instrument flow chart
  • HG 20519.5-1992 Piping and instrument flow chart
  • HG/T 20559.2-1993 Piping instrumentation flow chart design regulations Piping instrumentation flow chart equipment graphic symbols
  • HG/T 20559.4-1993 Pipeline instrument flow chart design regulations Pipeline instrument flow chart pipeline numbering and labeling
  • HG/T 20559-1993 Appendix to Design Regulations of Piping and Instrumentation Flow Diagram: Basic Unit Mode of Piping and Instrumentation Flow Diagram
  • HG/T 20559.5-1993 Pipeline instrumentation flow chart design regulations Pipeline instrumentation flow chart material code and abbreviation
  • HG/T 20559.3-1993 Piping and Instrumentation Flowchart Design Specifications Piping and Instrumentation Flowchart Piping and Fittings Graphical Symbols
  • HG/T 20559.1-1993 Pipeline Instrumentation Flowchart Design Regulations Pipeline Instrumentation Flowchart Design Contents and Depth Regulations
  • HG/T 20514-2014 Design code for tracing and insulation of instrument and impulse line
  • HG/T 20514-2000 Design code for tracing and insulation of instrument and piping
  • HG/T 20514-2000(条文说明) Instrument and pipeline heat tracing and thermal insulation design regulations
  • HG/T 4300-2012 Rubber.Measurement of rheological properties.Piston type capillary rheometer methods
  • HG 20519.31-1992 Legends of equipment and machines in the pipeline and instrument flow chart

American Society for Testing and Materials (ASTM), Heat flow meter

  • ASTM E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
  • ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
  • ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E1953-07 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
  • ASTM E1953-07(2013) Standard Practice for Description of Thermal Analysis and Rheology Apparatus
  • ASTM E1953-14 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
  • ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
  • ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
  • ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
  • ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
  • ASTM E3137/E3137M-18 Standard Specification for Heat Meter Instrumentation
  • ASTM E3137/E3137M-17 Standard Specification for Heat Meter Instrumentation
  • ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
  • ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
  • ASTM D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
  • ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
  • ASTM D7453-22 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • ASTM D7453-09(2015) Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • ASTM D7453-18 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • ASTM D7453-17 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • ASTM E1953-05 Standard Practice for Description of Thermal Analysis Apparatus
  • ASTM E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
  • ASTM E1953-02 Standard Practice for Description of Thermal Analysis Apparatus
  • ASTM UOP344-87 Moisture in Hydrocarbon Streams Using an On-Line Analyzer
  • ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
  • ASTM D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
  • ASTM D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
  • ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

Professional Standard - Ocean, Heat flow meter

HU-MSZT, Heat flow meter

U.S. Military Regulations and Norms, Heat flow meter

Professional Standard - Machinery, Heat flow meter

国家市场监督管理总局、中国国家标准化管理委员会, Heat flow meter

SAE - SAE International, Heat flow meter

Society of Automotive Engineers (SAE), Heat flow meter

Taiwan Provincial Standard of the People's Republic of China, Heat flow meter

  • CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
  • CNS 7547-1981 Flow Type Air Gages
  • CNS 5475-1980 Method of Test for Resistance to Heat and to Sudden Change in Trmpreature for Porcelain Laboratory Appartus

Korean Agency for Technology and Standards (KATS), Heat flow meter

工业和信息化部/国家能源局, Heat flow meter

Group Standards of the People's Republic of China, Heat flow meter

Henan Provincial Standard of the People's Republic of China, Heat flow meter

British Standards Institution (BSI), Heat flow meter

  • BS IEC 61501:2001 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
  • BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
  • BS EN 60044-1:1999 Instrument transformers - Current transformers
  • BS EN 60044-8:2002 Instrument transformers - Electronic current transformers
  • 2G 114-1953 Specification for direct current ratiometer indicators for aircraft
  • BS 2G 114:1953 Specification for direct current ratiometer indicators for aircraft
  • 18/30373552 DC BS EN 63144. Industrial Process Control Devices. Thermographic Imagers. Metrological Characterization and Calibration of Thermographic Imagers
  • BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
  • BS EN IEC 61869-14:2019 Instrument transformers - Additional requirements for current transformers for DC applications
  • DD ISO/TS 24154:2005 Hydrometry. Measuring river velocity and discharge with acoustic Doppler profilers
  • BS EN 61869-2:2012 Instrument transformers. Additional requirements for current transformers

Professional Standard-Ships, Heat flow meter

  • CB 1085.5-1989 Man-hour quota heat treatment for instrumentation manufacturing

SE-SIS, Heat flow meter

  • SIS SS IEC 258:1981 Electncal measuring instruments — Direct actmg recordmg instruments and their accessories
  • SIS SS IEC 523:1982 Electrical measuring instruments — Direct current potentiometers
  • SIS SS IEC 524:1982 Electrical measuring instruments — Direct current resistive volt ratio boxes
  • SIS SS-IEC 688:1991 Electrical measuring instruments - Electrical measuring transducers for converting a.c. electrical quantities into d.c. electrical quantities

CZ-CSN, Heat flow meter

Japanese Industrial Standards Committee (JISC), Heat flow meter

  • JIS B 7535:1982 Flow type air gauges
  • JIS K 7199:1991 Testing method for flow properties of thermoplastics with a capillary rheometer
  • JIS C 1273-1:2011 Alternating-current static meters for reactive energy -- Part 1: General measuring instrument
  • JIS B 8570-2:2007 Meters for cold water and hot water -- Part 2 : Measuring instruments used in transaction or certification
  • JIS B 8570-2:2009 Meters for cold water and hot water -- Part 2 : Measuring instruments used in transaction or certification
  • JIS B 8570-2:2013 Meters for cold water and hot water -- Part 2: Measuring instruments used in transaction or certification
  • JIS C 1216-1:2009 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 1: General measuring instrument
  • JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
  • JIS C 1271-1:2011 Alternating-current static meters for active energy -- Classes 1 and 2 -- Part 1: General measuring instrument
  • JIS C 1731-1:1998 Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers
  • JIS C 1216-2:2009 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification
  • JIS C 1216-2:2017 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification
  • JIS C 1216:1995 Alternating-current watt-hour meters (for connection through instrument transformer)
  • JIS K 7199:1999 Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
  • JIS C 1272-1:2011 Alternating-current static meters for active energy -- Classes 0.2 S and 0.5 S -- Part 1: General measuring instrument

国家能源局, Heat flow meter

  • SY/T 7376-2017 Conductivity measuring instrument
  • SY/T 6797-2020 Water injection well stratified flow real-time measurement and adjustment instrument

American National Standards Institute （ANSI), Heat flow meter

PT-IPQ, Heat flow meter

YU-JUS, Heat flow meter

  • JUS G.S2.512-1997 Flastics - Determination of rheologicaJ properties of thermoplastics with capillary rheometer
  • JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test

Association Francaise de Normalisation, Heat flow meter

  • NF ISO 6502-3:2023 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres - Partie 3 : rhéomètre sans rotor
  • NF ISO 6502-2:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres- Partie 2 : rhéomètre à disque oscillant
  • NF C42-502:1974 Measuring instrumetns. Current transformers. Characteristics.
  • NF C42-323:1997 Electrical measuring instruments. Identification of thermocouples.
  • NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
  • NF ISO 17089-1:2020 Mesurage du débit des fluides dans les conduites fermées - Compteurs à ultrasons pour gaz - Partie 1 : compteurs pour transactions commerciales et allocations
  • NF C42-123:1997 Electrical measuring instruments - Identification of thermocouples
  • NF X10-122-1:2011 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1 : meters for custody transfer and allocation measurement.
  • NF X10-122-1*NF ISO 17089-1:2020 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1 : meters for custody transfer and allocation measurement
  • NF C42-544-1:2000 Instrument transformers - Part 1 : current transformers.
  • NF C42-544-1/A1:2001 Instrument transformers - Part 1 : current transformers.
  • NF C42-544-1/A2:2003 Instrument transformers - Part 1 : current transformers.
  • NF C42-151:1949 0.1 volt shunts for electrical measuring instruments. (classes 0.5 and 1).
  • NF C42-152:1949 0.3 volt shunts for electrical measuring instruments. (classes 0.5 and 1).
  • NF C42-153:1949 0.05 V shunts for electrical measuring instruments. (class 0,5 and 1).
  • NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.

National Metrological Technical Specifications of the People's Republic of China, Heat flow meter

Professional Standard - Energy, Heat flow meter

ANSI - American National Standards Institute, Heat flow meter

  • N15.54-1988 Instrumentation - Radiometric Calorimeters Measurement Control Program (INMM)

Professional Standard - Petroleum, Heat flow meter

  • SY/T 6182-1996 Production Profile Logging Tool Calibration Procedure Fluid Density Logging Tool
  • SY/T 5429-2000 Small diameter flowrate and watercut logging tool
  • SY/T 6797-2010 Real-time measuring and adjusting instrument of flooding well's layered flux
  • SY/T 6703-2007 General specifications for core flowing system
  • SY 6703-2007 General technical specifications for core fluidity test instruments

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Heat flow meter

  • IEEE 316-1971 STANDARD REQUIREMENTS FOR DIRECT CURRENT INSTRUMENT SHUNTS

Professional Standard - Earthquake, Heat flow meter

  • DB/T 32.2-2008 Technical requirements of instruments in network for earthquake monitoring.Underground fluid observation instruments.Part 2: Temperature indicator
  • DB/T 29.1-2008 Technical requirements of instruments in network for earthquake monitoring.Geoelectrical meters.Part 1: Direct current meter for geoelectrical resistivity
  • DB/T 32.3-2008 Technical requirements of instruments in network for earthquake monitoring.Undergound fluid Observation instruments.Part 3: Scintillation radonscope
  • DB/T 32.1-2008 Technical requirements of instruments in network for earthquake monitoring.Underground fluid observation instruments.Part 1: Pressure instrument for water level
  • DB/T 32.1-2020 Seismic Observation Instrument Network Technical Requirements for Underground Fluid Observation Instrument Part 1: Pressure Type Water Level Instrument
  • DB/T 91-2022 Test specification for DC ground resistivity meter

Professional Standard - Supply and Marketing Cooperative, Heat flow meter

U.S. Air Force, Heat flow meter

Heilongjiang Provincial Standard of the People's Republic of China, Heat flow meter

API - American Petroleum Institute, Heat flow meter

  • API RP 550 P2 S4-1983 Manual on Installation of Refinery Instruments and Control Systems Part II—Process Stream Analyzers Section 4—Moisture Analyzers (FOURTH EDITION)
  • API RP 550 P2 S1-1985 Manual on Installation of Refinery Instruments and Control Systems Part II-Process Stream Analyzers Section 1-Analyzers (FOURTH EDITION)
  • API RP 550 P2 S9-1984 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers - Section 9-Water Quality Analyzers (FOURTH EDITION)
  • API RP 550 P2 S5-1983 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers Section 5-0xygen Analyzers (FOURTH EDITION)
  • API RP 550 P2 S7-1984 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers - Section 7 - electrochemical liquid analyzers (FOURTH EDITION)
  • API RP 550 P2-1977 Manual on Installation of Refinery Instruments and Control Systems Part II - Process Stream Analyzers (2nd Edition)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Heat flow meter

  • GB/T 33889-2017 Nondestructive testing instrument—Specification for eddy current-magnetic flux leakage integrated instrument
  • GB/T 34049-2017 Intelligent flow instruments—General technical requirements

Professional Standard - Military and Civilian Products, Heat flow meter

  • WJ 918-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
  • WJ 919-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
  • WJ 920-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
  • WJ 921-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
  • WJ 2262-1994 Verification Regulations for Thermal Conductivity Meter
  • WJ 2292-1995 Verification Regulations for Thermogravimetric Analyzer
  • WJ 2291-1995 Calibration Regulations for Thermomechanical Analyzers
  • WJ 2290-1995 Verification Regulations for Differential Scanning Calorimeter

Professional Standard - Public Safety Standards, Heat flow meter

IN-BIS, Heat flow meter

Professional Standard - Agriculture, Heat flow meter

应急管理部, Heat flow meter

  • XF/T 635-2006 Infrared thermal imaging camera for fire protection

CN-XF, Heat flow meter

  • XF/T 635-2023 Infrared thermal imaging camera for fire protection

Institute of Electrical and Electronics Engineers (IEEE), Heat flow meter

Military Standard of the People's Republic of China-General Armament Department, Heat flow meter

  • GJB/J 3828-1999 Calibration procedures for hotline/hot film anemometer
  • GJB 2340A-2021 General specifications for military thermal imaging cameras
  • GJB 3476-1998 Thermal imaging camera type test procedures
  • GJB 2340-1995 General specifications for military thermal imaging cameras
  • GJB 6075-2007 General specigcation for troposphere wind profiler
  • GJB 6296-2008 Calibration methods for tropospherie wind profiler
  • GJB/J 3829-1999 Laser Doppler flow meter calibration procedures
  • GJB/J 3610-1999 Calibration procedures for AC and DC voltage converters
  • GJB 4106-2000 Thermal imaging camera system troop test procedures
  • GJB 7944-2012 Technical procedures for troop repair of military thermal imaging sets

RU-GOST R, Heat flow meter

  • GOST 4.136-1985 Product-quality index system. Thermophysical apparatus. Nomenclature of indices
  • GOST 15126-1980 Water flow rate measuring instruments. Fluvial hydrometric curremt meters. General technical requirements
  • GOST 21107.2-1975 Gas discharge devices. Methods of measurement of electrical parameters of hot-cathode thyratrons and gas-filled rectifiers
  • GOST 22091.5-1986 X-ray devices. The methods of measuring X-ray tube current
  • GOST IEC 60044-1-2013 Instrument transformers. Part 1. Surrent transformers
  • GOST R 8.866-2014 The state system of measurement assurance. Standard a.c. voltage and current thermal converters. Verification procedure
  • GOST 22091.1-1984 X-ray devices. The methods of measuring of heater current and heater voltage

Professional Standard - Electricity, Heat flow meter

  • DL/T 826-2002 On-site Testing equipment for alternating current electricity meters
  • DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester
  • DL/T 2268-2021 Calibration specification for DC electric field measuring instrument
  • DL/T 1112-2009 Verification code of verification equipment for AC&DC meter
  • DL/T 1953-2018 General technical requirements for capacitance current tester
  • DL/T 1582-2016 Guide for instruments test of HVDC valve cooling system
  • DL/T 2187-2020 General technical requirements for DC transformer calibrator
  • DL/T 971-2005 Live working-portable phase comparators for use on voltage from 1 kV to 35 kV a.c

Professional Standard - Traffic, Heat flow meter

能源部, Heat flow meter

  • SY/T 5429-1991 Small diameter flow water content tester
  • SY/T 5567-1993 Maintenance specifications for small diameter flow water content tester

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Heat flow meter

  • ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
  • ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
  • ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
  • ASHRAE 4029-1997 Improving Thermal and Flow Properties of Chilled Water - Part 1: Material Selection and Instrument Calibration (RP-801)

American Society of Mechanical Engineers (ASME), Heat flow meter

GM Europe, Heat flow meter

BE-NBN, Heat flow meter

Professional Standard - Electron, Heat flow meter

  • SJ/T 11383-2008 General specification of leakage current tester
  • SJ/T 10690-1996 General specification for digital directcurrent micro resistance measuring instruments

United States Navy, Heat flow meter

Professional Standard - Education, Heat flow meter

  • JY/T 0590-2020 General Rules for Measurement Methods of Rotational Rheometer

未注明发布机构, Heat flow meter

JP-JEC, Heat flow meter

  • JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments

European Committee for Standardization (CEN), Heat flow meter

  • EN 1:1998 Flued Oil Stoves with Vaporizing Burners (Incorporates Amendment A1: 2007)
  • EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces
  • EN 1861:1998 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols

German Institute for Standardization, Heat flow meter

  • DIN EN 1861:1998 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols; German version EN 1861:1998
  • DIN VDE 0603-1:1991 Consumer units and meter panels AC 400 V; consumer units and meter panels
  • DIN EN 63144:2018 Industrial Process Control Devices - Thermographic Imagers - Metrological Characterization and Calibration of Thermographic Imagers (IEC 65B/1109/CD:2017); Text in German and English
  • DIN EN 1861:1998-07 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols; German version EN 1861:1998
  • DIN 43701-2:1975 Electrical switchboard instruments; terms of delivery, indicating voltmeter, ammeter and power meter
  • DIN VDE 0603-5:2013 Consumer distribution boards and meter panels AC 400 V - Part 5: Device for mounting and connection (BKE) of electronic meters (eHZ) for household use on meter panels
  • DIN EN 60044-8:2003 Instrument transformers - Part 8: Electronic current transformers (IEC 60044-8:2002); German version EN 60044-8:2002

Professional Standard - Textile, Heat flow meter

Professional Standard - Commodity Inspection, Heat flow meter

  • SN/T 1843.2-2006 Rules for the inspection of instruments for import and export. Part 2: Alternating current static watt-hour meters

TR-TSE, Heat flow meter

  • TS 2237-1976 LIQUID FLOW MEASUREMENT ?N ?PEN CHANNELS— CUP — TYPE AND PROPELLER — TYPE CURRENT METERS
  • TS 2951-1978 LIQUID FLOW MEASUREMENT IN OPtEN CHANNELS - CALIBRATION OF ROTATING - ELEMENT CURRENT - METERS IN STRAIGHT OPEN TANKS
  • TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE

Military Standards (MIL-STD), Heat flow meter

Professional Standard - Urban Construction, Heat flow meter

  • CJ/T 3054.1-1995 Averaging speed flow meter for metering devices of water supply quantity

Professional Standard - Building Materials, Heat flow meter

Defense Logistics Agency, Heat flow meter

Professional Standard - Business, Heat flow meter

  • SB/T 10354-2002 Refrigerating systems and heat pumps-System flow diagrams and piping instrument diagrams Layout and symbols

Professional Standard - Construction Industry, Heat flow meter

National Electrical Manufacturers Association（NEMA), Heat flow meter

  • NEMA WC 57-2004 Standard for Control, Thermocouple Extension, and Instrumentation Cables ICEA S-73-532

Professional Standard - Coal, Heat flow meter

  • MT/T 976-2006 The specification of the explosion-proof current capacity meter in mineral opened ditch
  • MT/T 737-1997 Specification of verification for safe use of oxygen combustion bomb
  • MT/T 737-2007 Specification of verification for safe use of oxygen combustion bomb

Guangdong Provincial Standard of the People's Republic of China, Heat flow meter

Danish Standards Foundation, Heat flow meter

  • DS/EN 1861:2003 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols
  • DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities

Lithuanian Standards Office , Heat flow meter

  • LST EN 1861-2002 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols

AENOR, Heat flow meter

  • UNE-EN 1861:1999 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols
  • UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
  • UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.

Professional Standard - Aviation, Heat flow meter

  • HBm 66.49-1990 Damp heat test method for instrumentation of minivans
  • HBm 59-1987 Damp heat test method for miniature automobile instrument
  • HB 6136.13-1987 Flight Test Instrument (Static) Calibration Specification Flow

水利部, Heat flow meter

  • SL/T 124-2014 Calibration method of cement hydration heat meter
  • SL 123-2012 Calibration method of cement mortar fluidity tester

VN-TCVN, Heat flow meter

Professional Standard - Non-ferrous Metal, Heat flow meter

  • YS/T 684-2008 Calibration specification for local mounting digital indicators

Hunan Provincial Standard of the People's Republic of China, Heat flow meter

ZA-SANS, Heat flow meter

GB-REG, Heat flow meter

International Electrotechnical Commission (IEC), Heat flow meter

  • IEC 60044-1:2003 Instrument transformers - Part 1: Current transformers
  • IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests

机械工业部, Heat flow meter

KR-KS, Heat flow meter

  • KS M ISO 11443-2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers

CN-STDBOOK, Heat flow meter

  • 图书 A-4762 Gas flowmeter volume corrector and gas precession vortex flowmeter

Professional Standard - Petrochemical Industry, Heat flow meter

  • SH 3126-2001 Code for the design of tracing and insulation of instrument and piping for petrochemical industry
  • SH/T 3126-2013 Design specification for tracing and insulation of instrument and piping in petrochemical industry

JP-JCS, Heat flow meter

  • JCS 3501-2007 Heat proof instrumentation,control and communication wires and cables

  Flash Point Meter / Fire Point Meter, Polarimeter, Polarimeter, Refractometer, spectrometer, Heat flow thermal conductivity meter, Heat flow meter, Sputtering Coater, Spectrometer, Tension meter, Melting Point Apparatus, Spectrum Analyzer, Heat flow meter, Activator, Heat flow thermal conductivity meter, Shanghai Yiyi, Instrument / Colorimeter, Melting point apparatus, Convexity meter, Digester.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved