ZH
RU
ES
Method for Determining Polymer Density
Method for Determining Polymer Density, Total:498 items.
In the international standard classification, Method for Determining Polymer Density involves: Reinforced plastics, Plastics, Seals, glands, Construction materials, Soil quality. Pedology, Products of the textile industry, Fuels, Materials for the reinforcement of composites, Organic chemicals, Cellular materials, Rubber and plastics products, Dentistry, Farming and forestry, Waxes, bituminous materials and other petroleum products, Earthworks. Excavations. Foundation construction. Underground works, Ferrous metals, Powder metallurgy, Aerospace fluid systems and components, Thermodynamics and temperature measurements, Wood, sawlogs and sawn timber, Textile fibres, Refractories, Road engineering, Fertilizers, Products of the chemical industry, Adhesives, Aids for disabled or handicapped persons, Cereals, pulses and derived products, Petroleum products in general, Magnetic materials, Testing of metals, Manufacturing processes in the rubber and plastics industries, Raw materials for rubber and plastics, Analytical chemistry, Measurement of volume, mass, density, viscosity, Vibrations, shock and vibration measurements, Coals, Non-metalliferous minerals, Solar energy engineering, Rubber, Leather technology, Heat treatment, Welding, brazing and soldering, Non-textile floor coverings, Interior finishing, Mechanical testing, Edible oils and fats. Oilseeds, Pharmaceutics, Measurement of fluid flow, Sugar. Sugar products. Starch, Headgear. Clothing accessories. Fastening of clothing, Graphic technology, Glass, Inorganic chemicals, Quality, Metrology and measurement in general, Environmental protection, Explosion protection, Fruits. Vegetables, Milk and milk products, Semiconducting materials, Non-ferrous metals, Metalliferous minerals, Road vehicles in general, Paints and varnishes, Paper and board.
RU-GOST R, Method for Determining Polymer Density
- GOST R 56654-2015 Polymer composites. Method for determination of density of sandwich core materials
- GOST R 57713-2017 Polymer composites. Test methods for determination of density and relative density by displacement
- GOST 24039-1980 Seal sheet materials, asbestos polymer. Method of measurements of sizes and density
- GOST R 56761-2015 Polymer composites. Method for determination of Barcol hardness
- GOST 10181.2-1981 Concrete mixture. Test method of determination of density
- GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
- GOST 18249-1972 Plastics. Method for viscosity determination of diluted polymer solution
- GOST 24037-1990 Asbestos-polymer seal sheet materials. Method of test for resistance to liquids
- GOST 25271-1993 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield method
- GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
- GOST R 56660-2015 Polymer composites. Method for determination of depth of dye penetration in a composite rod
- GOST 32657-2014 Polymer composites. Test methods. Determination of temperature of deflection under load
- GOST R 56783-2015 Polymer composites. Method for determination of flatwise tensile strength of sandwich constructions
- GOST R 56679-2015 Polymer composites. Method for determination of voids
- GOST 15139-1969 Plastics. Methods for the determination of density (mass density)
- GOST 25276-1982 Polymers. Method for determination of viscosity by rotary viscosimeter at a given shear rate
- GOST 26128-1984 Polymer films. Methods of tear resistance determination
- GOST 12045-1997 Seeds of agricultural plants. Methods of determination of infested seeds
- GOST 12045-1981 Seed of farm crops. Methods of determination for pest infestation
- GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
- GOST R 57712-2017 Polymer composites. Test method for determination of specific heat
- GOST 16483.1-1984 Wood. Method for determination of density
- GOST 24701-2013 Peat. Methods for the determination of density
- GOST 12730.1-1978 Concretes. Methods of determination of density
- GOST R ISO 10119-2012 Carbon fibre. Methods for determination of density
- GOST R 57728-2017 Polymer composites. Determination of shear strength of adhesive bond by the block-shear method
- GOST R 56809-2015 Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions
- GOST R 57067-2016 Polymer composites system for external reinforcement. Test method for determining interlayer shear strength
- GOST R 57739-2017 Polymer composites. Method for determination of glass transition temperature by dynamic mechanical analysis
- GOST R 57041-2016 Polymer composites. Method of determination of the characteristics of flexural curved beams
- GOST R 56883-2016 Biomass. Determination of bulk density by standard method
- GOST 25945-1998 Building polymer sealing non-hardening materials and products. Test methods
- GOST 25945-1987 Polymer building non-hardening sealing materials and products. Test methods
- GOST R 50019.1-1992 Graphite. Method for determination of bulk density
- GOST 6611.1-1973 Textile threads. Method for determination of linear density
- GOST R 57860-2017 Polymer composites. Determination of shear strength by punch tool method
- GOST EN 1602-2011 Thermal insulating products in building applications. Method for determination of the apparent density
- GOST ISO 2420-2014 Leather. Physical and mechanical tests. Method of determination of apparent density
- GOST R 56684-2015 Polymer composites. Method for determination of sandwich constructions` damage resistances
- GOST R 50485-1993 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of compacted apparent bulk density
- GOST R 57578-2017 Polymer composites. Method for determination of linear thermal expansion with a interferometry
- GOST R 57858-2017 Polymer composites. Method for determination of fiber volume fraction and fiber distribution in polymer matrix
- GOST R 54105-2010 Polymeric films and sheeting. Method for determination of wetting tension
- GOST 29127-1991 Plastics. Thermogravimetry of polymers. Temperature scanning method
- GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
- GOST 30361-1996 Seeds of essential oil crops. Methods for determination of pest presence
- GOST 14040-1982 Polyvinylchloride and vinylchloride copolymers. Method for determination of viscosity number and K-value
- GOST R 50203.5-1992 Smallwares. Method for determination of lineary density of threads
- GOST 16190-1970 Sorbents. Method for determination of bulk density
- GOST 13673-2013 Milling peat. Method for determination of bulk density
- GOST R 57142-2016 Polymer composites. Method for determination of shrinkage stresses in the oriented organic glasses
- GOST R 56651-2015 Polymer composites. Method for determination of shear properties of sandwich core materials
- GOST R 56784-2015 Polymer composites. Method for determination of flexure creep of sandwich constructions
- GOST R 56655-2015 Polymer composites. Method for determination of in-plane shear strength of pultruded glass-reinforced plastic rods
- GOST R ISO 17190-9-2015 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 9. Gravimetric determination of density
- GOST 24038-1990 Asbestos-polymer seal sheet materials. Method of test for compressibility and recoverability
- GOST R 57048-2016 Polymer composites system for external reinforcement. Test method for determining pull-off strength from concrete substrate
- GOST R 56790-2015 Polymer composites. Method for determination of bearing strength and bypass strength of laminates connected to one another by two bolts
- GOST R 57745-2017 Polymer composites. Determination of plane shear strength of laminates by short-beam method
- GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
- GOST 19823-1974 Filter air purification means for collective protection objects. Method for determination of air-tightness degree
- GOST R 57042-2016 Polymer composites. Method for determination of ignition loss mass of reinforced resins
- GOST R 56762-2015 Polymer composites. Methods for determination of moisture absorption and equilibrium conditioning
- GOST R 57047-2016 Polymer composites. Method for determination of the characteristics of fatigue resistance of laminates
- GOST R 57694-2017 Polymer composites. Method for determination of curing characteristics of thermosetting resins
- GOST R 57746-2017 Polymer composites. Determination of cleavage strength of adhesive bonded joints
- GOST 33276-2015 Juice products. Methods for determination of relative density
- GOST R 51462-1999 Dried milk products. Method for determination of bulk density
- GOST R 55451-2013 Organic fertilizers. Methods for the determination of mass density
- GOST R 55450-2013 Organic fertilizers. Method for determination of bulk density
- GOST EN 1237-2013 Fertilizers. Method for determination of bulk density (tapped)
- GOST 32492-2013 Polymer composite frame for reinforcement concrete structures. Method for determination of physical and mechanical properties
- GOST 31992.1-2012 Paint materials. Method for determination of density. Part 1. Pyknometer method
- GOST R 54106-2010 Polymeric films and sheeting. Method for determination of dimensional change on heating
- GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
- GOST R 56652-2015 Polymer composites. Methods for determination of water absorption of core materials for sandwich constructions
- GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
- GOST R 57994-2017 Polymer composites. Test methods for fracture toughness definition and energy release speeds
- GOST R 57707-2017 Polymer composites. Test method for durability of adhesive joints by exposure to humidity and temperature under load
CU-NC, Method for Determining Polymer Density
- NC 41-32-2-1985 Leather. Conglomerate Determination of Density and Surface Density
- NC 40-128-1987 Textiles. Determination of Stitch Density. Testing Methods
American Society for Testing and Materials (ASTM), Method for Determining Polymer Density
- ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
- ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
- ASTM D5017-17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
- ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
- ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
- ASTM B527-93(1997) Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- ASTM B527-93(2000)e1 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- ASTM B527-14 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds
- ASTM F1921/F1921M-12e1 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM F1921/F1921M-12(2018) Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- ASTM D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM C559-90(2000) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
- ASTM F1921/F1921M-12(2023) Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- ASTM D1657-89 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
- ASTM D5946-04 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
- ASTM D6437-99 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)
- ASTM F1921-12 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM B527-20 Standard Test Method for Tap Density of Metal Powders and Compounds
- ASTM D6484/D6484M-04 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
- ASTM D5766/D5766M-02 Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
- ASTM D5766/D5766M-02a Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
- ASTM C905-01 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM D8007-15 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
- ASTM C559-90(2010) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
- ASTM D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique
- ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D3591-97(2003) Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
- ASTM D3591-97 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
- ASTM D2857-70(1977) Standard Test Method for Dilute Solution Viscosity Of Polymers
- ASTM D4052-96 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
- ASTM D4052-96(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
- ASTM D6347/D6347M-05 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM D3775-02 Standard Test Method for Fabric Count of Woven Fabric
- ASTM D3775-03 Standard Test Method for Fabric Count of Woven Fabric
- ASTM D7305-08 Standard Test Method for Reflection Density of Printed Matter
- ASTM D7305-08a(2020) Standard Test Method for Reflection Density of Printed Matter
- ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM D4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM C729-11 Standard Test Method for Density of Glass by the Sink-Float Comparator
- ASTM D5815-95(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC)
- ASTM D7113-05 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
- ASTM D7113-09 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
- ASTM D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM D2922-04 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
- ASTM D2922-05 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
- ASTM D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-07(2012) Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
- ASTM D7113/D7113M-10 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
- ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
- ASTM C693-93(2003) Standard Test Method for Density of Glass by Buoyancy
- ASTM D558/D558M-19 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
- ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
- ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
- ASTM D2950/D2950M-22 Standard Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods
- ASTM D3706-88(1993)e1 Standard Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test
- ASTM D3706-88(2000) Standard Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test
- ASTM F1921-98 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM F1921-98(2004) Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM D2839-96 Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene
- ASTM D1601-99 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1601-78 Standard Test Method for Dilute Solution Viscosity Of Ethylene Polymers
- ASTM D1601-18 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1601-12 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1601-99(2004) Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
IT-UNI, Method for Determining Polymer Density
VN-TCVN, Method for Determining Polymer Density
- TCVN 5049-1990 Hardmetals.Method of determination of density
- TCVN 5460-1991 Synthetic detergents.Method for determination of apparent density
- TCVN 4504-1988 Plastics.Method for determination of density
- TCVN 1753-1986 Woven fabrics.Method for determination of density
- TCVN 1535-1993 Animal mixed feeding stuffs.Methods for determination of fineness
- TCVN 3115-1993 Heavy weight concrete.Method for the determination of density
- TCVN 4195-2012 Soils.Laboratory methods for determination of density
- TCVN 6039-2-2008 Plastics.Methods for determining the density of non.cellular plastics.Part 2: Density gradient column method
- TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method
American National Standards Institute （ANSI), Method for Determining Polymer Density
- ANSI/ASTM D4883:1999 Test Method for Density of Polyethylene by the Ultrasound Technique (08.03)
- ANSI/ASTM D3418:1999 Test Method for Transition Temperatures of Polymers by Thermal Analysis
- ANSI/ASTM C559:2000 Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
- ANSI/ASTM D792:2000 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (08.01)
- ANSI/ASTM D1243:1995 Test Method for Dilute Solutions Viscosity of Vinyl Chloride Polymers (08.01)
- ANSI/ASTM D5524:1994 Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography
- ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
Military Standard of the People's Republic of China-General Armament Department, Method for Determining Polymer Density
- GJBz 20058.2-1991(XG1-2015) Method for Determination of Physical Constants of Poisons - Determination of Density (Density Bottle Method) Modification Sheet 1-2015
- GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method
- GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods
- GJB 1047.9-1990 Black powder test method Determination of density
- GJB 1047.10-1990 Black powder test method - Determination of false density
PL-PKN, Method for Determining Polymer Density
- PN C89286-05-1989 Polyethylene Iow density Methods of testing
- PN C89082-03-1986 Unsaturated polyester resins Methods of testing Determination of density (specific gravity)
- PN C89035-1992 Plastics. Methods for determining the density and relative density of non-cellular plastics
- PN C04404-02-1986 Pigments for paints General methcds of test Determination of density
- PN C89412-1989 Dispersions of homopolymers Mand copolymers Determination of shear strength of adhesive-bonded joint
- PN C89415-1990 Plastics A?ueous dispersions of polymers and copolymers Determination of white point temperatur? and minimum film-forming temperatur?
GOSTR, Method for Determining Polymer Density
- GOST R 56783-2019 Polymer composites. Method for determination of flatwise tensile strength of sandwich constructions
- GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi
- GOST 12730.1-2020 Concretes. Methods of determination of density
- GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
- GOST R 56678-2019 Polymer composites. Method for determination of sandwich core materials dimensional stability
- GOST R 56661-2019 Polymer composites. Method for determination of ？sandwich？ core materials Poisson's Ratio
- GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
- GOST R 57753-2017 Polymer composites. Test method for determination of apparent interlaminar shear strength of pultruded glass composite rods
- GOST R 58015-2017 Polymer composites. Method of determining the integrity of the seam of T-shaped adhesive bond
- GOST R 57832-2017 Polymer composites. Determination of peel resistance of high-strength adhesive bonds by Floating-roller method
- GOST R 57696-2017 Polymer composites. Method for determination of diffuse light transmission factor of building panels
Association Francaise de Normalisation, Method for Determining Polymer Density
- NF T51-251:1984 Plastics. Aqueous dispersions of polymers and copolymers. Measurement of density.
- NF X34-112:2011 Solid biofuels - Determination of particle density.
- NF S91-229*NF EN ISO 17304:2014 Dentistry - Polymerisation shrinkage : method for determination of polymerisation shrinkage of polymer-based restorative materials
- NF L41-250*NF ISO 7258:1987 Polytetrafluoroethylene (ptfe) tubing for aerospace applications. Methods for the determination of the density and relative density.
- NF T51-141:1974 Low density polyethylene based plastics. Determination of the content of carbon black. Rapid method.
- NF G07-150:1984 Textiles. Tests for fabrics. Method for the determination of the surface density.
- P18-550:1982 Aggregates. Fidelity of test methods.
- NF ISO 7258:1987 Tubes en polytetrafluoréthylène (PTFE) à usage aéronautique - Méthodes de détermination de la masse volumique et de la densité
- NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
- NF P98-818-5:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5 : determination of the maximum density.
- NF P15-435:2021 Cement testing methods - Determination of density
- NF EN 12697-6:2020 Mélanges bitumineux - Méthodes d'essai - Partie 6 : détermination de la masse volumique apparente des éprouvettes bitumineuses
- NF EN 12697-5:2018 Mélanges bitumineux - Méthodes d'essai - Partie 5 : masse volumique réelle (MVR)
- NF T40-005*NF ISO 19983:2017 Rubber - Determination of precision of test methods
- NF EN ISO 4638:1995 Matériaux polymères alvéolaires souples - Détermination de la perméabilité à l'air
- NF EN 14187-1:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 1 : détermination du taux de polymérisation
- NF T51-037-2:2005 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method.
- NF T51-037-2*NF EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method
- NF EN 14617-1:2013 Pierre agglomérée - Méthodes d'essai - Partie 1 : détermination de la masse volumique apparente et du coefficient d'absorption d'eau
- NF EN 15820:2011 Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de l'étanchéité à l'eau
- NF P98-818-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6 : determination of bulk density of bituminous specimens.
- NF T56-109*NF EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength
- NF EN ISO 8067:2018 Matériaux polymères alvéolaires souples - Détermination de la résistance au déchirement
- NF P98-857-4*NF EN 12274-4:2018 Slurry surfacing - Test methods - Part 4 : determination of cohesion of the mix
British Standards Institution (BSI), Method for Determining Polymer Density
- BS EN 12697-5:2018 Tracked Changes. Bituminous mixtures. Test methods. Determination of the maximum density
- BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
- BS DD CEN/TS 15103:2005 Solid biofuels — Methods for the determination of bulk density
- BS DD CEN/TS 15103:2006 Solid biofuels - Methods for the determination of bulk density
- BS 2782-4 Method 452C:1979 Methods of testing plastics - Chemical properties - Determination of butyl rubber content of low density polyethylene compounds
- BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
- BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
- BS EN 12697-6:2020 Tracked Changes. Bituminous mixtures. Test methods. Determination of bulk density of bituminous specimens
- 18/30382618 DC BS EN 12697-14. Bituminous mixtures. Test methods. Part 5. Determination of the maximum density
- BS EN ISO 17304:2013 Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
- BS EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Routine method
- BS EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Density gradient column method
- BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
- BS 812-2:1995 Testing aggregates - Methods for determination of density
- BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
- BS 5350-B1:1978 Methods of test for adhesives - Determination of density
- BS EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
- BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
- BS EN 12697-5:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density
- BS EN 12697-5:2009 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density
- BS EN 12697-5:2010 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density
- BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
- BS EN ISO 305:2019 Plastics. Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds. Discoloration method
- BS EN 12697-7:2022 Tracked Changes. Bituminous mixtures. Test methods. Determination of the bulk density of bituminous specimens by gamma rays
- 18/30382725 DC BS EN 12697-6. Bituminous mixtures. Test methods. Part 6. Determination of bulk density of bituminous specimens
- BS EN ISO 1183-2:2019 Tracked Changes. Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method
- BS EN ISO 305:1999 Plastics - Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
- BS EN ISO 1628-5:2015 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Thermoplastic polyester (TP) homopolymers and copolymers
- BS ISO 20965:2005 Plastics - Determination of the transient extensional viscosity of polymer melts
- BS EN 12697-9:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density
- BS 4140-10:1986 Methods of test for aluminium oxide. Determination of untamped density
- BS EN 12274-4:2018 Tracked Changes. Slurry surfacing. Test methods. Determination of cohesion of the mix
HU-MSZT, Method for Determining Polymer Density
KR-KS, Method for Determining Polymer Density
- KS K 0513-2017(2022) Measuring method for stretched density of knitted fabrics
- KS P ISO 17304-2022 Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer based restorative materials
- KS P ISO 17304-2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- KS M ISO 8067-2018 Flexible cellular polymeric materials — Determination of tear strength
- KS M ISO 1625-2007 Plastics－Polymer dispersions－Determination of non－volatile matter(residue) at specified temperatures
International Organization for Standardization (ISO), Method for Determining Polymer Density
- ISO 6276:1982 Concrete, compacted fresh; Determination of density
- ISO/R 1628:1970 Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
- ISO 7258:1984 Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density
- ISO 17304:2013 Dentistry.Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- ISO 3146:1974 Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
- ISO 3369:2006 Impermeable sintered metal materials and hardmetals - Determination of density
- ISO/DIS 6640:2023 Measurement of density of water-sediment mixture using radiation transmission method
- ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
- ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
- ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
- ISO 305:1990 Plastics; determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds; discoloration method
- ISO 20965:2005 Plastics - Determination of the transient extensional viscosity of polymer melts
- ISO 20965:2021 Plastics - Determination of the transient extensional viscosity of polymer melts
- ISO 305:1976 Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
TR-TSE, Method for Determining Polymer Density
- TS 2249-1976 PLASTICS r DETERMINATION OF MELTING TEMPERATURE OF SEMI - CRYSTALLINE POLYMERS , OPTICAL METHOD
- TS 2330-1976 PLASTICS - AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS - DETERMINATION OF WHITE POINT TEMPERATURE
- TS 3625-1981 METHODS FOR THE ANALYSIS OF WATER DETERMINATION OF RELATIVE DENSITY
- TS 1818-1975 METHODS FOR DETERMINING THE DENSITY AND RELAT?VE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CEL?. Ul.AR PLASTICS
Korean Agency for Technology and Standards (KATS), Method for Determining Polymer Density
- KS K 0438-2012 Measuring method for average degree of polymerization of rayon yarn
- KS K 0438-1973 Measuring method for average degree of polymerization of rayon yarn
- KS F 2234-2004 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
- KS M 1033-1997 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
- KS D 0411-2012(2022) Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
- KS M 1033-2017(2022) Testing method for density of high-purity hydrocarbons by Bingham pycnometer
- KS K 0438-2019 Measuring method for average degree of polymerization of rayon yarn
- KS P ISO 17304:2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- KS P ISO 17190-9-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density
- KS F 2366-2010 Standard test method for theoretical maximum specific gravity of asphalt mixtures
- KS K 0513-2017 Measuring method for stretched density of knitted fabrics
- KS D ISO 3369:2011 Impermeable sintered metal materials and hardmetals-Determination of density
- KS D ISO 3369:2015 Impermeable sintered metal materials and hardmetals－Determination of density
- KS D 0411-2012(2017) Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
- KS K 0738-2007 Test method for plasticizer mixtures of polyvinyl chloride coated fabrics
- KS F 2474-1987(1997) TESTING METHOD FOR SLUMP OF POLYMER-MODIFIED MORTAR
- KS F 2377-2001 Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor
- KS M ISO 1183-2006(2011) Plastics－Methods for determining the density and relative density of non-cellular plastics
- KS M 1079-2016(2021) Determination of PCNs and PCTs in polymer by GC/MS
- KS D 0036-2001 METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
- KS D 0036-1985 METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
- KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
- KS M ISO 8067:2018 Flexible cellular polymeric materials — Determination of tear strength
- KS M ISO 1675-2007(2017) Plastics－Liquid resins－Determination of density by the pyknometer method
- KS D 0411-2012 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
- KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
- KS M 3032-1980(2001) TESTING METHOD FOR FLAMMABILITY OF POLYMERIC MATERIALS USING THE OXYGEN INDEX METHOD
- KS M 3032-1980 TESTING METHOD FOR FLAMMABILITY OF POLYMERIC MATERIALS USING THE OXYGEN INDEX METHOD
- KS M ISO 1625:2007 Plastics－Polymer dispersions－Determination of non－volatile matter(residue) at specified temperatures
- KS M ISO 1625:2012 Plastics-Polymer dispersions-Determination of non-volatile matter(residue) at specified temperatures
ES-UNE, Method for Determining Polymer Density
- UNE-EN 12697-5:2020 Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
- UNE-EN 12697-6:2022 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
- UNE-EN ISO 305:2020 Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:2019)
- UNE-EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)
- UNE-EN 12274-4:2020 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
(U.S.) Ford Automotive Standards, Method for Determining Polymer Density
Standard Association of Australia （SAA）, Method for Determining Polymer Density
- AS 2282.3:1999 Methods for testing flexible cellular polyurethane - Determination of apparent density
- AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
- AS 2341.7:1993 Methods of testing bitumen and related roadmaking products - Determination of density using a density bottle
- AS 1774.2:2001 Refractories and refractory materials - Physical test methods - Determination of bulk density of granular materials
- AS/NZS 1301.426s:1994 Methods of test for pulp and paper - Determination of thickness and apparent bulk density or apparent sheet density
- AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Backscatter mode
- AS 2341.7:1993(R2013)
- AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt - Field density tests - Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
IN-BIS, Method for Determining Polymer Density
BE-NBN, Method for Determining Polymer Density
German Institute for Standardization, Method for Determining Polymer Density
- DIN EN ISO 17304:2014-03 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013); German version EN ISO 17304:2013
- DIN EN 12697-5:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density; German version EN 12697-5:2002+A1:2007
- DIN EN 12697-6:2020 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
- DIN EN 12697-6:2020-05 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2020
- DIN EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004
- DIN EN ISO 1183-2:2019-06 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019); German version EN ISO 1183-2:2019
- DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
- DIN EN 15820:2011-06 Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness; German version EN 15820:2011
- DIN EN 12697-5:2019-03 Bituminous mixtures - Test methods - Part 5: Determination of the maximum density; German version EN 12697-5:2018
- DIN EN 12697-5:2019 Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
- DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
- DIN EN 12274-4:2018 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
CEN - European Committee for Standardization, Method for Determining Polymer Density
- PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
- PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
- PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
- EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (Incorporates Amendment A1: 2007)
- EN ISO 1183-2:2019 Plastics - Methods for determining the density of noncellular plastics - Part 2: Density gradient column method
- EN ISO 305:2019 Plastics - Determination of thermal stability of poly(vinyl chloride)@ related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
GM Daewoo, Method for Determining Polymer Density
- GMKOREA EDS-T-7786-2012 Measurement Method to Density of Adhesives ???? ?? ?? ?? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ASTM D1475 [Replaced: GMKOREA EDS-T-7786]
- GMKOREA EDS-T-7301-2011
Indonesia Standards, Method for Determining Polymer Density
- SNI 6886-2012 Metode uji penentuan hubungan kadar air dan densitas campuran tanah-semen
RO-ASRO, Method for Determining Polymer Density
- STAS SR ISO 7258:1996 Polytetrafluoroethylene (PTFE) tubing for aerospace aplications Methods for determination of the density and relative density
- STAS 7282-1965
- STAS 6746-1963
- STAS SR 13359-4-1998 Glucose. Methods of analysis. Density determination
- SR ISO 305:1995 Plastics - Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compourids - Discoloration method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Method for Determining Polymer Density
- GB 8325-1987 Method for determination of pH value of aqueous polymer and copolymer dispersions
- GB/T 12010.9-1989 Determination for average polymerization degree of polyvinyl alcohol resins
- GB/T 5888-1986 Testing method of degree of polymerization of ramie cellulose
- GB 5888-1986 Method for Determination of Polymerization Degree of Ramie Cellulose
- GB/T 13566-1992 Determination of bulk density for fertilizers
- GB/T 6609.25-2004 Chemical analysis methods and determination of physical performance of alumina Determination of untamped density
- GB/T 12688.3-1990 Styrene for industrial use--Determination of content of polymer--Photometric method
- GB/T 6949-1998 Determination of apparent relative density of coal
- GB/T 217-1996 Determination of true relative density of coal
- GB/T 217-2008 Determination of true relative density of coal
- GB/T 6949-2010 Determination of apparent relative density of coal
- GB/T 9875-2001 Rubber--Identification of polymers--Chemical method
- GB/T 3850-2015 Impermeable sintered metal materials and hardmetals.Determination of density
- GB/T 3850-1983 Impermeable sintered metal materials and hardmetals--Determination of density
- GB/T 30749-2014 Apparent density determination of mineral medicine and calcined products
- GB/T 6609.26-2004 Chemical analysis methods and determination of physical performance of alumina Determination of absolute density-Pycnometer method
- GB/T 29617-2013 Determination of density,relative density,and API gravity of liquids by digital density meter
- GB/T 1423-1996 Method of measurement of density for precious metals and their alloys
- GB/T 13216.5-1991 Test methods for glycerines--Determination of density at 20℃
- GB/T 6379.5-2006 Accuracy (trueness and precision)of measurement methods and results-Part 5:alternative methods for the determination of the precision of a standard measurement method
- GB/T 15223-1994 Plastics--Liquid resins--Determination of density by the pyknometer method
- GB/T 12007.5-1989 Epoxide resins--Determination of density--Pyknometer method
Professional Standard - Commodity Inspection, Method for Determining Polymer Density
- SN/T 1513-2005 Determination of the density for polyethylene resin and polypropylene resin - Method of standing still in the centre of immersion liquid at atmospheric temperature
- SN/T 1013-2001 Method for the testing of linear density of cotton,polyester/cotton woven fabric for import and export
- SN/T 1013-2010 Method for testing of linear density of cotton,polyester/cotton woven fabric for import and export
SE-SIS, Method for Determining Polymer Density
- SIS 65 00 47-1960 Method for the determination of down and feather closeness in fabrics
European Committee for Standardization (CEN), Method for Determining Polymer Density
- EN 12697-9:2002 Bituminous Mixtures Test Methods for Hot Mix Asphalt - Part 9: Determination of the Reference Density
- prEN 480-7-1991 Admixtures for concrete, mortar and grout; test methods; part 7: determination of the density of liquid admixtures
- EN ISO 17304:2013 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
- EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
- EN 12697-6:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
- EN ISO 305:1999 Plastics - Determination of Thermal Stability of Poly (Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method
Japanese Industrial Standards Committee (JISC), Method for Determining Polymer Density
- JIS K 1603:1985 Testing methods for polymethylene polyphenyl polyisocyanate (testing methods for polymeric MDI)
- JIS A 1173:1978 Method of test for slump of polymer-modified mortar
- JIS K 7112:1999 Plastics -- Methods of determining the density and relative density of non-cellular plastics
- JIS A 1172:1995 Method of test for strength of polymer-modified mortar
- JIS K 7112-2:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
- JIS H 0610:1966 Method of measurement of etch pit density of germanium crystal
- JIS Z 2504:1979 Method for determination of apparent density of metal powders
Professional Standard - Textile, Method for Determining Polymer Density
- FZ/T 01060-1999 Method for determination of triboelectric charge density of fabrics
- FZ/T 01093-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of linear density of yarn removed from fabric
- FZ/T 01093-1999 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of linear density of yarn removed from fabric
Professional Standard - Agriculture, Method for Determining Polymer Density
- NY 146.5-1988 Method for Determination of Fruit Juice Determination of Relative Density
- GB/T 8032-1987 Method for Determination of Density of Coking Benzene Products
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Method for Determining Polymer Density
- GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method
国家市场监督管理总局、中国国家标准化管理委员会, Method for Determining Polymer Density
- GB/T 39748.9-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density
- GB/T 41079.1-2021 Test methods for physical properties of liquid metals—Part 1: Determination of density
- GB/T 40384-2021 Plastics—Determination of the transient extensional viscosity of polymer melts
CZ-CSN, Method for Determining Polymer Density
AENOR, Method for Determining Polymer Density
- UNE 80103:2013 Test methods of cements. Physical analysis. Actual density determination.
- UNE-EN 672:1997 RESILIENT FLOOR COVERINGS. DETERMINATION OF APPARENT DENSITY OF AGGLOMERATED CORK.
- UNE-EN ISO 17304:2014 Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013)
- UNE-EN 14617-1:2013 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
- UNE-EN 15820:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness
- UNE 59535:2007 Footwear. Test methods for soles. Determination of global density.
- UNE-EN 12274-4:2003 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
Danish Standards Foundation, Method for Determining Polymer Density
- DS/ISO 17190-9+Corr.1:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density
- DS/EN 672:1997 Resilient floor coverings - Determination of apparent density of agglomerated cork
- DS/EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
- DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
- DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
- DS/EN 14617-1:2013 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
- DS/EN 15820:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness
- DS/EN ISO 8067:2009 Flexible cellular polymeric materials - Determination of tear strength
- DS/EN 12274-4:2003 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
ES-AENOR, Method for Determining Polymer Density
Lithuanian Standards Office , Method for Determining Polymer Density
- LST 1361.7-1995 Mineral aggregates for road construction. Testing methods. Determination of absolute density, dry bulk density, compactness and porosity
- LST EN 672-2002 Resilient floor coverings - Determination of apparent density of agglomerated cork
- LST EN 14617-1-2005 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
- LST EN 15820-2011 Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness
- LST EN 12274-4-2003 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
Professional Standard - Electron, Method for Determining Polymer Density
- SJ/T 10215-1991 Determination of density for magnetic oxide powders.Determination of apparent density:Oscillating funnel method
Professional Standard - Petroleum, Method for Determining Polymer Density
- SY/T 6296-1997 Determination of the strength of polymer gels used for oil production.Method on rheological parameters
Hebei Provincial Standard of the People's Republic of China, Method for Determining Polymer Density
- DB13/T 1231-2010 Density Determination Method for Chemical Products Intelligent Liquid Density Meter Method
The American Road & Transportation Builders Association, Method for Determining Polymer Density
AASHTO - American Association of State Highway and Transportation Officials, Method for Determining Polymer Density
- T 134-2005 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
- T134-1993 Standard Method of Test for Moisture-Density Relations of Soil- Cement Mixtures
- T302-1994 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Nineteenth Edition)
- T302-1995 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Eighteenth Edition)
- T 302-2004 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions and Asphalt Binders
- T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
Group Standards of the People's Republic of China, Method for Determining Polymer Density
- T/REIANM 0302-2022 Sintered NdFeB alloy powder—Determination of Density Part 1 ：Determination of Aerated Bulk density
- T/REIANM 0303-2022 Sintered NdFeB alloy powder—Determination of Density Part 2 ：Determination of Packed Bulk Density
- T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds
- T/CISA 099-2021 Determination of apparent density,bulk density and porosity for iron tailings
Professional Standard - Machinery, Method for Determining Polymer Density
Association of German Mechanical Engineers, Method for Determining Polymer Density
Professional Standard - Aerospace, Method for Determining Polymer Density
- QJ 1616-1989 Method for Determination of Crosslinking Density of Composite Solid Propellant
YU-JUS, Method for Determining Polymer Density
- JUS G.S2.518-1997 Plastics - Determination of viscosity number ofpofy(vinyl chloride) (PVC) in formulated compounds
- JUS B.D8.314-1984 Refractories. Methods of physical testing. Determination of the bulk density and apparent porosity of chemical bonded brick
- JUS B.B8.032-1980 Testing of natural stone. Determination of bulk density, density, coefficient of density, and porosity
AT-ON, Method for Determining Polymer Density
- ONORM ENV 1007-2-1993 Advanced technical ceramics - Ceramic composites -Methods of test for reinforcements - Part 2: Determination of linear density
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Method for Determining Polymer Density
- GB/T 35463-2017 Test method for bulk density of wood-plastic composites and products
Professional Standard - Aviation, Method for Determining Polymer Density
- HB 7736.2-2004 Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area
- HB 7736.3-2004 Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area
International Federation of Trucks and Engines, Method for Determining Polymer Density
未注明发布机构, Method for Determining Polymer Density
- BS EN 1131:1995(1999) Method for Determination of the relative density of fruit and vegetable juices
- BS 2865:1984(1999) Methods for Determination of linear density of yarn removed from fabric [ ISO title : Textiles — Woven fabrics — Construction — Methods of analysis — Part 5 : Determination of linear density of yarn removed from fabric ]
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Method for Determining Polymer Density
- PREN 3793-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Static Shear Strength (Edition P1)
- PREN 3794-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Torque Strength on Threaded Fasteners (Edition P1)
- PREN 3795-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Freedom from Excessive Cure Rate (Edition P1)
NZ-SNZ, Method for Determining Polymer Density
- NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
- NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density
GM North America, Method for Determining Polymer Density
- GM GM9094P-1988 Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry
Professional Standard - Non-ferrous Metal, Method for Determining Polymer Density
- YS/T 581.14-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 14:Determination of untamped density
Professional Standard - Petrochemical Industry, Method for Determining Polymer Density
- SH/T 0738-2003 Standard test method for solubility of polymer-modified asphalt materials in 1,1,1-trichloroethane
BELST, Method for Determining Polymer Density
- STB 1333.1-2002 Polymer products for building. The method of determination of longevity of profile articles from polyvinyl chloride
SAE - SAE International, Method for Determining Polymer Density
- SAE J1748-2007 Methods for Determining Physical Properties of Polymeric Materials Exposed to Hydrocarbon Fuels or Their Surrogates and Their Blends with Oxygenated Additives
- SAE J1748-2018 Methods for Determining Physical Properties of Polymeric Materials Exposed to Hydrocarbon Fuels or Their Surrogates and Their Blends with Oxygenated Additives
Society of Automotive Engineers (SAE), Method for Determining Polymer Density
- SAE J1748-1998 Methods for Determining Physical Properties of Polymeric Materials Exposed to Gasoline/Oxygenated Fuel Mixtures
SG-SPRING SG, Method for Determining Polymer Density
- SS 323 Pt.A2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part A2 : Determination Of Density By The Density-Gradient Technique