ZH

RU

ES

Gas phase heating method

Gas phase heating method, Total:499 items.

In the international standard classification, Gas phase heating method involves: Installations in buildings, Non-ferrous metals, Domestic, commercial and industrial heating appliances, Construction materials, Construction technology, Optics and optical measurements, Internal combustion engines, Burners. Boilers, Products of the chemical industry, Fuels, Kitchen equipment, Electrical accessories, Air quality, Heat recovery. Thermal insulation, Insulating materials, Refrigerating technology, Road engineering, Refractories, Road vehicle systems, Rubber, Heat treatment, Surface treatment and coating, Mechanical testing, Thermodynamics and temperature measurements, Industrial furnaces, Measurement of volume, mass, density, viscosity, Natural gas, Energy and heat transfer engineering in general, Non-metalliferous minerals, Analytical chemistry, Education, Paper and board, Protection of and in buildings, Coals, Insulating fluids, Shipbuilding and marine structures in general, Products of the textile industry, Test conditions and procedures in general, Electrical engineering in general, Insulation, Petroleum products in general, Edible oils and fats. Oilseeds, Water quality, Organic chemicals, Laboratory medicine, Geology. Meteorology. Hydrology, Fluid power systems, Raw materials for rubber and plastics, Waxes, bituminous materials and other petroleum products, Ceramics, Environmental testing, Ventilators. Fans. Air-conditioners, Testing of metals, METALLURGY, Ground service and maintenance equipment, Ferrous metals, Medical equipment, ENERGY AND HEAT TRANSFER ENGINEERING, Railway rolling stock, Protection against crime, Earth-moving machinery, Spices and condiments. Food additives, Electrical wires and cables, Welding, brazing and soldering, Buildings, Protection against fire, Beverages, Plastics, Textile fibres, Milk and milk products, Protective equipment, Extraction and processing of petroleum and natural gas, Measurement of force, weight and pressure, Solar energy engineering, Heat pumps, Power stations in general, Photography, Railway engineering in general, Farming and forestry, General methods of tests and analysis for food products, Electrical and electronic testing.


IT-UNI, Gas phase heating method

CZ-CSN, Gas phase heating method

  • CSN 12 5606-1987 Steam air heaters. Measurement and evaluation
  • CSN 12 5605-1983 Air heating coils. Method of testing for rating of heating coils
  • CSN 657991-2003 Oil products - Heating oils - Requirements and test methods
  • CSN 36 1212-1987 Thermal storage room heating appliances. Technical requirements for safety and methods of tests

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas phase heating method

  • GB/T 13747.21-1992 Zirconium and zirconium alloys--Determination of hydrogen content--Vacuum heating gas chromatographic method
  • GB/T 4698.15-1996 Sponge titanium, titanium and titanium alloys--Determination of hydrogen content--Vacuum heating gas chromatographic method
  • GB/T 32205-2015 Standard practice for testing thermal conductivity detectors used in gas chromatography
  • GB/T 12206-2006 Testing method to determine the calorific values of town gas
  • GB/T 16045-1995 Workplace air--Determination of benzene--Thermal desorption gas chromatographic method
  • GB/T 16048-1995 Workplace air--Determination of toluene--Thermal desorption gas chromatographic method
  • GB/T 16063-1995 Workplace air--Determination of methyl alcohol--Thermal desorption gas chromatographic method
  • GB/T 16099-1995 Workplace air--Determination of acrylonitrile--Thermal desorption gas chromatographic method
  • GB/T 16054-1995 Workplace air--Determination of styrene--Thermal desorption gas chromatographic method
  • GB/T 16051-1995 Workplace air--Determination of xylene--Thermal desorption gas chromatographic method
  • GB/T 16075-1995 Workplace air--Determination of ethylene oxide--Thermal desorption gas chromatographic method
  • GB/T 16039-1995 Workplace air--Determination of solvent naphthas--Thermal desorption gas chromatographic method
  • GB/T 16089-1995 Workplace air--Determination of vinyl chloride--Thermal desorption gas chromatographic method (DNP)
  • GB/T 9452-2003 Testing method for work zone of heat treatment furnace
  • GB/T 9452-2023 Test method for qualified work zone of heat treatment furnace
  • GB/T 9452-2012 Testing method for working zone of heat treatment furnace
  • GB/T 15319-1994 Monitoring and testing method for energy saving of flame heating furnace
  • GB/T 7287-2008 Test method of infrared heater
  • GB/T 15914-1995 Monitoring and testing method for energy saving of steam heating equipments
  • GB/T 3815-1983 Determination of loss in weight of montane wax
  • GB/T 11974-1997 Test method for carbonation of aerated concrete
  • GB/T 31299-2014 Household electric thermal storage room heaters.Methods for measuring performance
  • GB/T 28901-2012 Analysis of coke-oven gas composition by gas chromatography
  • GB/T 17719-2009 Calculation method and utilization guides for waste heat reasource's quantity of industrial boiler's and flame heating furnace's exhaust gas
  • GB/T 17719-1999 Calculating method and utilization guides for waste heat resource's quantity of industrial boiler's and flame heating furnace's waste gas
  • GB/T 7287.9-1987 Measuring method for normal total emittance of infrared heater
  • GB/T 27587-2011 Test method for the resistance to microwave heating of domestic ceramicware
  • GB/T 7287.12-1987 Test method for vibration of infrared heater
  • GB/T 7287.11-1987 Test method for lifetime of infrared heater
  • GB/T 11062-2014 Natural gas.Calculation of calorific values, density, relative density and Wobbe index
  • GB/T 11062-1998 Natural gas--Calculation of calorific values, density, relative density and Wobbe index from composition
  • GB 11062-2020 Calculation methods for natural gas calorific value, density, relative density and Wobbe index
  • GB/T 12206-1990 Method of testing for calorific value of gas in urban areas
  • GB/T 4324.26-2012 Methods for chemical analysis of tungsten.Part 26:Determination of nitrogen content.Pulse heating inert gas fusion-thermal conductive method and the Nessler reagent spectrophotometry
  • GB/T 12207-1990 Method of testing for relative density of gas in urban area
  • GB/T 11973-1997 Test method for frost-resistance of aerated concrete
  • GB/T 223.35-1985 Methods for chemical analysis of iron,steel and alloy--The pulse heating inert gas fusion-coulometric titration method for the determination of oxygen content
  • GB/T 7287.10-1987 Measuring method for normal spectral emittance of infrared heater
  • GB/T 7287.5-1987 Testing method for bearing cold and hot alternating change of infrared heater
  • GB/T 18294.3-2006 Technical identification method for fire.Part 3:Gas chromatography analysis
  • GB/T 10345.7-1989 Method for determination of ethyl acetate in Chinese spirits(GLC)
  • GB/T 7141-1992 Plastics-Methods of exposure to thermal air
  • GB/T 8638.13-1988 Nickel base alloy powder--Determination of oxygen content--Pulse heating inert gas fusion coulometric titrimetric method
  • GB/T 4324.25-2012 Methods for chemical analysis of tungsten.Part 25:Determination of oxygen content.Pulse heating inert gas fusion -infrared absorption method
  • GB/T 17068-1997 Workplace air--Determination of formic acid--Gas chromatographic method
  • GB/T 17069-1997 Workplace air--Determination of propionic acid--Gas chromatographic method
  • GB/T 16110-1995 Workplace air--Determination of phosphorus--Gas chromatographic method
  • GB/T 16118-1995 Workplace air--Determination of rogor--Gas chromatographic method
  • GB/T 11971-1997 Test method for mechanical property of aerated concrete
  • GB/T 11972-1997 Test methods for dry shrinkage of aerated concrete
  • GB/T 11969-1997 General requirements for test methods of aerated concrete
  • GB/T 11969-2008 Test methods of autoclaved aerated concrete
  • GB/T 11975-1997 Test method for wet-dry cycle of aerated concrete
  • GB/T 26977-2011 Test methods for the thermal performance of solar air collectors
  • GB/T 16131-1995 Standard method for hygienic examination of n-hexane in air of residential areas--Gas chromatography
  • GB/T 11731-1989 Standard method for hygienic examination of nitrobenzene in air of residential areas--Gas chromatography
  • GB/T 11734-1989 Standard method for hygienic examination of methylparathion in air of residential areas--Gas chromatography
  • GB/T 10066.12-2006 Test methods for electroheat installations.Part 12:Infrared heating installations
  • GB/T 7287.7-1987 Measuring method for electric-to-radiant power transfer efficiency of infrared heater
  • GB/T 18117-2000 Photography-Processed photographic colour films and paper prints-Methods for measuring image stability
  • GB/T 7287.8-1987 Measuring method for power deviation rate of infrared heater
  • GB/T 5988-2007 Refractory products-Determination of permanent change in dimension on heating
  • GB/T 7287.6-1987 Measuring method for insulation resistance of infrared heater
  • GB/T 17064-1997 Workplace air--Determination of methyl mercaptan--Gas chromatography method
  • GB/T 17066-1997 Workplace air--Determination of diethylamine--Gas chromatographic method
  • GB/T 16092-1995 Workplace air--Determination of DDT--Gas chromatographic method
  • GB/T 16093-1995 Workplace air--Determination of hexachlorobenzene--Gas chromatographic method

Professional Standard - Petroleum, Gas phase heating method

  • SY/T 6188-1996 Gas Chromatographic Analysis Method of Rock Pyrolysis
  • SY/T 6188-2016 Gas Chromatographic Analysis Method of Rock Pyrolysis
  • SY/T 6009.4-2003 Test method of samples of geochemical exploration for oil and gas Part 4:Determination of thermal released hydrocarbons Gas chromatography
  • SY/T 5779-1995 Gas Chromatographic Analysis Method of Crude Oil Whole Hydrocarbons
  • SY/T 5259-2013 Gas chromatography analysis method for light hydrocarbon from cuttings head space gas
  • SY/T 5259-1991 Gas Chromatographic Analysis Method for Light Hydrocarbons in Debris Tank Top Gas

YU-JUS, Gas phase heating method

American Society for Testing and Materials (ASTM), Gas phase heating method

  • ASTM E2817-11(2018) Standard Test Method for Test Fueling Masonry Heaters
  • ASTM D7164-05 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
  • ASTM D865-99(2005) Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
  • ASTM D454-04 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
  • ASTM D454-99 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
  • ASTM D865-99 Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure)
  • ASTM D7164-10(2015) Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
  • ASTM D1826-94(1998) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
  • ASTM D1946-82 Standard Method for Analysis of Reformed Gas by Gas Chromatography
  • ASTM D1946-77 Standard Method for Analysis Of Reformed Gas By Gas Chromatography
  • ASTM D4891-13(2018) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
  • ASTM D1945-03 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-91 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-03(2010) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-96e1 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-14(2019) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM B78-90(1995)e1 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • ASTM B78-90(2001) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • ASTM E2817-11 Standard Test Method for Test Fueling Masonry Heaters
  • ASTM D454-04(2010) Standard Test Method for Rubber Deterioration by Heat and Air Pressure
  • ASTM D865-11 Standard Test Method for RubberDeterioration by Heating in Air (Test Tube Enclosure)
  • ASTM D865-11(2018) Standard Test Method for RubberDeterioration by Heating in Air (Test Tube Enclosure)
  • ASTM D2580-06(2012) Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
  • ASTM D4492-03 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4492-07 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4492-98 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D1945-96(2001) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-14 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1509-95(2007) Standard Test Methods for Carbon Black-Heating Loss
  • ASTM D1509-95(2000) Standard Test Methods for Carbon Black-Heating Loss
  • ASTM D1509-95(2012) Standard Test Methods for Carbon Blackmdash;Heating Loss
  • ASTM D150-22 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • ASTM D1509-15 Standard Test Methods for Carbon Black&x2014;Heating Loss
  • ASTM D1754-97 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • ASTM D1754-97(2002) Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • ASTM D4424-90(2001)e1 Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D2804-98 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D4424-09 Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D7828-12 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
  • ASTM E3296-22 Standard Guide for Using Pyrolysis Gas Chromatography and Pyrolysis Gas Chromatography-Mass Spectrometry in Forensic Polymer Examinations
  • ASTM D3215-93 Standard Test Method for Measurement of the Specific Electrical Impedance of Electrical-Grade Magnesium Oxide for Use in Sheathed-Type Heating Elements
  • ASTM F2022-00 Standard Test Method for Performance of Booster Heaters
  • ASTM F2022-01(2007) Standard Test Method for Performance of Booster Heaters
  • ASTM E1395-90(2004) Standard Test Method for Sensory Evaluation of Low Heat Chilies
  • ASTM E1395-90(1997)e2 Standard Test Method for Sensory Evaluation of Low Heat Chilies
  • ASTM F2022-01(2013) Standard Test Method for Performance of Booster Heaters
  • ASTM F2142-01(2019) Standard Test Method for Performance of Drawer Warmers
  • ASTM F2022-01(2019) Standard Test Method for Performance of Booster Heaters
  • ASTM F2473-12(2018) Standard Test Method for Performance of Water-Bath Rethermalizers
  • ASTM C210-95(2007)e1 Standard Test Method for Reheat Change of Insulating Firebrick
  • ASTM C210-95(2014) Standard Test Method for Reheat Change of Insulating Firebrick
  • ASTM D4492-10 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • ASTM F1939-15 Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
  • ASTM D572-99 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
  • ASTM D572-04(2009) Standard Test Method for Rubber-Deterioration by Heat and Oxygen
  • ASTM D572-04(2010) Standard Test Method for Rubber-Deterioration by Heat and Oxygen
  • ASTM D572-04(2015) Standard Test Method for Rubber&x2014;Deterioration by Heat and Oxygen
  • ASTM D1754/D1754M-09(2014) Standard Test Method for Effects of Heat and Air on Asphaltic Materials &40;Thin-Film Oven Test&41;
  • ASTM C1114-06 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
  • ASTM C1114-00 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
  • ASTM C1114-06(2013) Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
  • ASTM F2142-01 Standard Test Method for Performance of Drawer Warmers
  • ASTM F2644-07 Standard Test Method for Performance of Commercial Patio Heaters
  • ASTM F1695-96 Standard Test Method for Performance of Underfired Broilers
  • ASTM F2141-01 Standard Test Method for Performance of Hot Deli Cases
  • ASTM F2142-01(2007) Standard Test Method for Performance of Drawer Warmers
  • ASTM F2142-01(2013) Standard Test Method for Performance of Drawer Warmers
  • ASTM F1695-03(2015) Standard Test Method for Performance of Underfired Broilers
  • ASTM D7057-04 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM E1616-94(2002)e1 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM E1616-94 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM E1616-94(2002) Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM D3797-00 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D5303-92(2002)e1 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
  • ASTM D2804-02(2007) Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D3797-04 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D2804-02 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D3797-05 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D3798-03 Standard Test Method for Analysis of p-Xylene by Gas Chromatography
  • ASTM D3760-02 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D3760-98 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D3797-03 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D3760-08 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D7515-09 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
  • ASTM E1616-08 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
  • ASTM D7057-09 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM D7515-19 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
  • ASTM D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D2804-02(2012) Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D3329-03(2009) Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • ASTM D7515-19(2023) Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
  • ASTM D572-04 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
  • ASTM B76-90(2001) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
  • ASTM B78-90(2019) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

Professional Standard - Building Materials, Gas phase heating method

  • JC/T 275-1980 Test method of heat conductivity coefficient of aerated concrete
  • JC 275-1980 Test method for thermal conductivity of air-entrained concrete

Professional Standard - Machinery, Gas phase heating method

UNKNOWN, Gas phase heating method

  • GB 20077667-T-604 Test method of thermal conductivity detector for gas chromatography

Professional Standard - Aerospace, Gas phase heating method

  • QJ 1639-1989 Engineering Calculation Method for Aerodynamic Heating of Solid Missile
  • QJ 1734-1989 Engineering Calculation Method of Aerodynamic Heating for Tactical Missile
  • QJ 1638-1989 Engineering Calculation Method of Aerodynamic Heating for Near-Earth Satellite Reentry

Professional Standard - Construction Industry, Gas phase heating method

  • JG/T 21-1999 Test methods for determining the performance of air cooling and air heating coils

RU-GOST R, Gas phase heating method

  • GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods
  • GOST 28760-1990 Household electric warming plates. Methods of measuring performances
  • GOST R 53583-2009 Heating devices. Test methods
  • GOST R 51377-1999 Gas convection heaters for household use. Safety requirements and test methods
  • GOST 33010-2014 Gas-fired insets for heating more than one room. Requirements and test methods
  • GOST 27209.2-1990 Electrical thermal equipment. Direct arc furnaces. Test methods
  • GOST 27711-1988 Dipping varnishes. Method for accelerated determination of thermal endurance
  • GOST 28097-1989 Varnished cloth. Methods for accelerated determination of thermal endurance
  • GOST R 53635-2009 Gas-fired air heaters with forced convection for firing (heating) rooms not exceeding a net heat input of 100 kW. General technical requirements and test methods
  • GOST 10518-1988 Electrical insulation systems and other polymer systems. General requirements for methods of accelerated test for thermal endurance
  • GOST R 53911-2010 Vegetable oils. Determination of organochlorme pesticides using gas-liquid chromatography method
  • GOST 33596-2015 Electric heating devices for heating rolling stock railways. Safety requirements and test methods
  • GOST 10519-1976 Enamelled wires. Method of accelerated determination of thermal resistance
  • GOST R 53833-2010 Vehicles. Independent warming-heating units. Technical requirements and test methods
  • GOST R 51471-1999 Milk fat. Detection method of vegetable fat by gas-liquid chromatography of sterols
  • GOST R 54822-2011 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW. General technical requirements and test methods
  • GOST 27712-1988 Laminated plastic sheets. Methods for accelerated determination of thermal endurance
  • GOST 28096-1989 Slot insulation materials. Method for accelerated determination of thermal endurance
  • GOST 28361-1989 Electric storage water-heaters for household purposes. Methods for measuring the performance

Professional Standard - Chemical Industry, Gas phase heating method

  • HG/T 4674-2014 Test method of activity for nickel series gas phase benzene hydrogenation catalysts
  • HG/T 4856-2015 Analytical method of chemical composition for nickel series gas phase benzene hydrogenation catalysts

Association Francaise de Normalisation, Gas phase heating method

  • NF ISO 21901:2021 Isolation thermique - Méthode d'essai pour la diffusivité thermique - Méthode de chauffage périodique.
  • NF EN 13817:2005 Sols sportifs - Méthode de vieillissement accéléré par exposition à l'air chaud
  • NF P75-487*NF ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method
  • NF EN 60683:2012 Chauffage électrique industriel - Méthodes d'essai des fours à arc submergé
  • NF M07-143*NF EN 15984:2022 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • NF EN ISO 16588:2004 Qualité de l'eau - Dosage de six agents complexants - Méthode par chromatographie en phase gazeuse
  • NF EN ISO 16588/A1:2005 Qualité de l'eau - Dosage de six agents complexants - Méthode par chromatographie en phase gazeuse
  • NF E31-202:1974 AIR HEATING UNITS-CHARACTERISTICS-GENERAL METHOD OF TEST USING A TEST BED.
  • NF EN 13384-3:2007 Conduits de fumée - Méthodes de calcul thermo-aéraulique - Partie 3 : méthodes d'élaboration de diagrammes et de tableaux pour les conduits de fumée desservant un seul appareil de chauffage
  • NF M07-143:2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method.
  • NF M07-143:2017 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • NF T46-053:2003 Rubber - Identification - Pyrolytic gas and chromatographic method - Mass spectrometry detection.
  • NF E31-201:1971 General method for test bed testing of air heaters and circulators.
  • NF EN 50440/A1:2020 Efficacité des chauffe-eau électriques à accumulation et méthodes associées
  • NF C79-660:2000 Industrial electroheating installations - General test methods.
  • NF C79-683*NF EN 60683:2012 Industrial electroheating equipment - Test methods for submerged-arc furnaces
  • NF EN 60676:2012 Chauffage électrique industriel - Méthodes d'essai des fours à arc direct
  • NF C79-653*NF EN 62693:2014 Industrial electroheating installations - Test methods for infrared electroheating installations
  • NF T75-401:1985 Essential oils. Analysis by gas chromatography on capillary column. General method.
  • NF M07-112:2004 Produits pétroliers liquides - Dosage du benzène dans les combustibles liquides pour appareils mobiles de chauffage - Méthode par chromatographie capillaire en phase gazeuse
  • NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
  • NF ISO 13579-2:2013 Fours industriels et équipements thermiques associés - Méthode de mesure du bilan énergétique et de calcul de l'efficacité - Partie 2 : fours de réchauffage pour acier
  • NF EN 16905-4:2018 Pompes à chaleur à moteur endothermique alimenté au gaz - Partie 4 : méthodes d'essai
  • NF P52-617-4-8:2012 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8 : space heating generation systems, air heating and overhead radiant heating systems.
  • NF EN 1264-2:2021 Systèmes de surfaces chauffantes et rafraîchissantes hydrauliques intégrées - Partie 2 : chauffage par le sol : Méthodes de démonstration pour la détermination de l'émission thermique utilisant des méthodes par le calcul et à l'aide de mét...
  • NF P52-612:2004 Heating systems in buildings - Method for calculation of the design heat load.
  • NF EN 60531/A11:2019 Appareils électrodomestiques de chauffage à accumulation des locaux - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60531:2001 Appareils électrodomestiques de chauffage à accumulation des locaux - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 215:2019 Robinets thermostatiques d'équipement du corps de chauffe - Exigences et méthodes d'essai

Professional Standard - Textile, Gas phase heating method

  • FZ/T 01008-1991 Test method for hot air accelerated aging of coated fabrics
  • FZ/T 75007-1995 Test method for accelerated aging of coated fabrics in hot and humid air
  • FZ/T 50061-2023 Man-made fibers——Test method for thermal absorption and release performance of phase change materials——Differential scanning calorimetry(DSC)

国家能源局, Gas phase heating method

  • NB/T 10291-2019 Test method for equivalent accelerated life of household tubular electric heating elements for heating air
  • SY/T 5259-2019 Gas chromatographic analysis method of light hydrocarbons in tank top gas
  • NB/T 10037-2017 Unsteady-state determination method of coalbed methane-water two-phase relative permeability

Danish Standards Foundation, Gas phase heating method

  • DS/ISO 21901:2021 Thermal insulation – Test method for thermal diffusivity – Periodic heat method
  • DS/EN 15984:2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method

British Standards Institution (BSI), Gas phase heating method

  • BS ISO 21901:2021 Thermal insulation. Test method for thermal diffusivity. Periodic heat method
  • BS EN 442-2:2014 Radiators and convectors. Test methods and rating
  • BS 5141-2:1977 Specification for air heating and cooling coils - Method of testing for rating of heating coils
  • BS EN 442-2:1997 Specification for radiators and convectors - Test methods and rating
  • 20/30381891 DC BS ISO 21901. Thermal insulation. Test method for thermal diffusivity. Periodic heat method
  • BS EN 15984:2022 Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
  • BS 6388-3:1996 Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity
  • BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
  • BS PD IEC/TS 60216-7-1:2015 Electrical insulation materials. Thermal endurance properties. Accelerated determination of relative thermal endurance using analytical test methods (RTEA). Instructions for calculations based on activation energy
  • 21/30434293 DC BS EN 15984. Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
  • BS EN IEC 63078:2020 Installations for electroheating and electromagnetic processing. Test methods for induction through-heating installations
  • BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
  • BS EN 60068-2-66:1995 Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
  • BS EN 60531:2000+A11:2019 Household electric thermal storage room heaters. Methods for measuring performance
  • BS ISO 10263-4:2009 Earth-moving machinery - Operator enclosure environment - Heating, ventilating and air conditioning (HVAC) test method and performance
  • BS EN 62693:2013 Industrial electroheating installations. Test methods for infrared electroheating installations
  • 18/30352688 DC BS EN 63078. Installations for electroheating and electromagnetic processing. Test methods for induction through-heating installations
  • BS EN 1264-2:2008+A1:2012 Water based surface embedded heating and cooling systems. Floor heating. Prove methods for the determination of the thermal output using calculation and test methods
  • BS EN 1264-2:2008 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods
  • BS ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Heating seasonal performance factor
  • BS EN 60703:2009 Test methods for electroheating installations with electron guns

Professional Standard - Non-ferrous Metal, Gas phase heating method

  • YS/T 574.8-2009 Methods for chemical analysis of zirconium powder for electro-vacuum uses.Determination of hydrogen content-inert gas impulse fusion heat conductivity method
  • YS/T 121.6-1992 Heat Balance Test and Calculation Method of Push-type Air Circulation Resistance Heating Furnace in Non-ferrous Metal Processing Enterprises
  • YS/T 539.13-2006 Ni-based alloy powder chemical analysis method Determination of oxygen content by pulse heating inert gas fusion Coulomb titration
  • YS/T 121.5-1992 Heat Balance Test and Calculation Method for Ingot Induction Heating Furnace in Non-ferrous Metal Processing Enterprises

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Gas phase heating method

  • ASHRAE 33-2000 Method of Testing Forced Circulation Air Cooling and Air Heating Coils

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas phase heating method

  • ASHRAE 33 ERTA-2016 Methods of Testing Forced-Circulation Air-Cooling and Air-Heating Coils
  • ASHRAE 33-1978 Methods of Testing Forced Circulation Air Cooling and Air Heating Coils
  • ASHRAE 33-2016 Methods of Testing Forced-Circulation Air-Cooling and Air-Heating Coils
  • ASHRAE 146-1998 Method of Testing and Rating Pool Heaters
  • ASHRAE 146-2011 Methods of Testing and Rating Pool Heaters
  • ASHRAE SF-98-19-1-1998 Relevance of Existing Heat Pump Testing and Rating Method Assumptions to Residential Gas Engine Heat Pumps (RP-780)
  • ASHRAE 124 ERTA-2016 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
  • ASHRAE 124-2007 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
  • ASHRAE 124-1991 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
  • ASHRAE 124 ERTA-2011 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances

International Organization for Standardization (ISO), Gas phase heating method

  • ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method

Japanese Industrial Standards Committee (JISC), Gas phase heating method

  • JIS A 1490:2022 Thermal insulation -- Test method for thermal diffusivity -- Periodic heat method
  • JIS C 3651:2014 Installation methods of heating facilities
  • JIS C 3651:1994 Installation methods of heating facilities
  • JIS C 3651:2004 Installation methods of heating facilities
  • JIS G 0702:1995 Method of heat balance for continuous reheating furnace for steel
  • JIS K 0114:1993 General rules for gas chromatographic analysis
  • JIS R 2613:1985 Testing method for reheat shrinkage of insulating fire bricks
  • JIS L 0879:1996 Test methods for colour fastness to dry heating
  • JIS B 8411:1989 Testing methods for air preheaters
  • JIS A 1412-1:1999 Test method for thermal resistance and related properties of thermal insulations -- Part 1: Guarded hot plate apparatus
  • JIS A 1412-1:2016 Test method for thermal resistance and related properties of thermal insulations -- Part 1: Guarded hot plate apparatus
  • JIS K 0114:2000 General rules for gas chromatographic analysis
  • JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
  • JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
  • JIS E 4015 AMD 1:2011 Measuring methods for air conditioning and heating temperature of railway rolling stock (Amendment 1)
  • JIS C 9807:1999 Methods for measuring the performance of electric storage water-heaters for household purposes
  • JIS G 0559:1996 Methods of measuring case depth for steel hardened by flame or induction hardening process

Korean Agency for Technology and Standards (KATS), Gas phase heating method

  • KS L 3122-2006(2021) Testing method for reheating on carbon brick
  • KS R 1103-2006 Test methods of hot water heaters for automobiles
  • KS L 3122-2006(2016) Testing method for reheating on carbon brick
  • KS B 5348-2005(2020) LPG(Liquefied petroleum gas) dispensers:Test methods
  • KS F 2220-2008 Preservative treatments of woods by thermal processes
  • KS F 2220-1982 Preservative treatments of woods by thermal processes
  • KS F 2463-2009 Method of thermal conductivity test for materials
  • KS F 2463-1986 Method of thermal conductivity test for materials
  • KS L ISO 9972-2006(2016) Thermal insulation-Determination of building airtightness-Fan pressurization method
  • KS B 6846-1999 Test code of vacuum heat treatment furnace
  • KS M 5978-1994 Testing method for loss by heating of powder coating materials
  • KS B 6312-2005 Testing methods for air preheaters
  • KS B 6312-1985 Testing methods for air preheaters
  • KS A ISO 18928-2007(2017) Imaging materials-Unprocessed photographic films and papers-Storage practices
  • KS B 6613-2011 Test methods of automatic temperature control multi system for heating
  • KS M 2258-2007 Testing method for effect of heat on thin-film of asphaltic materials
  • KS M 2258-1982 Testing method for effect of heat on thin-film of asphaltic materials
  • KS E 3609-1992 Determination of moisture in natural gas
  • KS B 6312-2015 Testing methods for air preheaters
  • KS B 6312-2015(2020) Testing methods for air preheaters
  • KS D 1701-2009 Determination of trace impurities in high purity gold-Matrix extraction method by heating
  • KS B ISO 13579-2-2016(2021) Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 2: Reheating furnaces for steel
  • KS B 4003-1990(2020) Test methods for Effective Working Zone of Heating Equipment for meta1s Heat Treatment Use
  • KS M 2963-2008 Test method for determination of components in petroleum products by gas chromatography
  • KS M ISO 2718-2004(2014) Standard layout for a method of chemical analysis by gas chromatography
  • KS M 0027-1993 General Rules for Analytical Methods in Gas Chromatography Mass Spectrometry
  • KS L ISO 9972-2006(2021) Thermal insulation-Determination of building airtightness-Fan pressurization method
  • KS B ISO 13579-2:2016 Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 2: Reheating furnaces for steel
  • KS B 0884-1977 Local heat treatment of stress relieving for weldment
  • KS M 2259-1980 Testing method for rolling thin - film oven of asphalt(Effect of heat and air on moving film of asphalt)
  • KS C IEC 60531-2002(2017) Methods for measuring the performance of electric thermal storage water-heaters for household and similar purposes
  • KS A 0086-2002(2017) Outgas test method using increasing pressure
  • KS F 2823-2016 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
  • KS F 2823-2016(2021) Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
  • KS C IEC 60531:2002 Methods for measuring the performance of electric thermal storage water-heaters for household and similar purposes
  • KS R 9198-1996(2016) Measuring methods for air conditioning and heating temperature of railway rolling stock
  • KS M 5983-2004 Methods for determination of volatile organic compounds in paints and related products(Gas chromatographic method)

Professional Standard - Military and Civilian Products, Gas phase heating method

  • WJ 38-2005 Test method of nitrocellulose.Stability.Heat test method

未注明发布机构, Gas phase heating method

  • BS 5141-2:1977(1999) Specification for Air heating and cooling coils — Part 2 : Method of testing for rating of heating coils
  • BS EN IEC 60779:2020 Installations for electroheating and electromagnetic processing — Test methods for electroslag remelting furnaces

Professional Standard - Aviation, Gas phase heating method

  • HB 5247-1993 Test method for hot air accelerated aging of room temperature vulcanizing sealants
  • HB 6642-1992 Air-to-air missile solid rocket motor aerodynamic heating test method
  • HB 7740-2004 Test method for the gas hot-corrosion
  • HB 5297.23-2001 Determination of Hydrogen Content by Pulse Heating-thermal Conductivity Method for Chemical Analysis of Titanium Alloy
  • HB 5425-2012 Testing method for working zone of heat treatment furnace for aviation
  • HB 5425-1989 Determination method for effective heating zone of heat treatment furnace for aviation parts
  • HB 5297.24-2001 Determination of Oxygen and Nitrogen Content by Pulse Heating Infrared Thermal Conductivity Method for Chemical Analysis of Titanium Alloy

Standard Association of Australia (SAA), Gas phase heating method

  • AS 1580.407.2:1993 Paints and related materials - Methods of test Method 407.2: Heat resistance - Thermal shock
  • AS/NZS 3823.1.2:2001 Performance of electrical appliances - Airconditioners and heat pumps - Test methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance
  • AS 1580.407.1:1993 Paints and related materials - Methods of test Method 407.1: Heat resistance - Slow cooling
  • AS 5027:2002(R2013)
  • AS/NZS 2341.10:1994 Methods of testing bitumen and related roadmaking products - Determination of the effect of heat and air on a moving film of bitumen (rolling thin film oven (RTFO) test)
  • AS/NZS 5078:2007 Domestic solid fuel burning appliances - Pellet heaters - Method for determination of power output and efficiency

工业和信息化部, Gas phase heating method

  • HG/T 5027-2016 Test method for catalytic performance of gas phase hydrogenation of butyraldehyde to butanol catalyst
  • HG/T 5028-2016 Analysis method of chemical components of butyraldehyde gas-phase hydrogenation to butanol catalyst
  • HG/T 5195-2017 Test method for catalytic performance of octenal gas phase hydrogenation to 2-ethylhexanol catalyst
  • HG/T 5196-2017 Analysis method of chemical composition of catalyst for gas phase hydrogenation of octenal to 2-ethylhexanol

Professional Standard - Hygiene , Gas phase heating method

  • WS/T 135-1999 Workplace air.Determination of isobutanal.Thermal desorption gas chromatographic method
  • WS/T 136-1999 Workplace air.Determination of isopropyl ether.Thermal desorption gas chromatographic method
  • WS/T 167-1999 Workplace air.Determination of diketen.Thermal desorption gas chromatographic method
  • WS/T 51-1996 Exhaled air.Determination of benzene.Gas chromatographic method
  • WS/T 140-1999 Workplace air.Determination of methylisobutylketone.Desorption with heating gas chromatographic method
  • WS/T 50-1996 Urine.Determination of phenol.Gas chromatographic method.II FFAP column
  • WS/T 49-1996 Urine.Determination of phenol.Gas chromatographic method.I Liquid crystal column
  • WS/T 41-1996 Exhaled air.determination of carbon disulfide.Gas chromatographic method

Professional Standard - Petrochemical Industry, Gas phase heating method

  • SH/T 0660-1998 Test methods for volatile preservative oils
  • SH/T 3037-2016 The Calculation Method of Tube Wall Thickness of Heating Furnace in Oil Refinery

American National Standards Institute (ANSI), Gas phase heating method

Lithuanian Standards Office , Gas phase heating method

  • LST EN 15984-2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method

European Committee for Standardization (CEN), Gas phase heating method

  • prEN 15984-2021 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • HD 440 S1-1983 Test methods for electroheating installations with electron guns
  • EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
  • EN 1264-2:2008+A1:2012 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods
  • EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography

AENOR, Gas phase heating method

  • UNE-EN 15984:2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • UNE-EN 60531:2002 Household electric thermal storage room heaters - Methods for measuring performance.

German Institute for Standardization, Gas phase heating method

  • DIN EN 15984:2022 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • DIN EN 15984:2017 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • DIN EN 15984:2022-04 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method; German version EN 15984:2022
  • DIN V 44570-60531:2008 Household electric thermal storage room heaters - Methods for measuring performance (IEC 59C/107/DC:2002)
  • DIN SPEC 91420:2020 Dynamic in-door measuring method for thermal radiation and calorimetric measurements of climate related thermal boundary conditions of a cubic reference building
  • DIN EN 60531:2001 Household electric thermal storage room heaters - Methods for measuring performance (IEC 60531:1999, modified); German version EN 60531:2000
  • DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
  • DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
  • DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
  • DIN VDE 0721-3032:1984 Test methods for electroheating installations with electron guns

ES-UNE, Gas phase heating method

  • UNE-EN 15984:2022 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • UNE-EN 60683:2012 Industrial electroheating equipment - Test methods for submerged-arc furnaces (Endorsed by AENOR in March of 2012.)
  • UNE-EN 62693:2013 Industrial electroheating installations - Test methods for infrared electroheating installations (Endorsed by AENOR in October of 2013.)
  • UNE-EN 60531:2002/A11:2020 Household electric thermal storage room heaters - Methods for measuring performance
  • UNE-EN IEC 63078:2020 Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations (Endorsed by Asociación Española de Normalización in April of 2020.)
  • UNE-EN 60703:2009 Test methods for electroheating installations with electron guns (Endorsed by AENOR in April of 2009.)

ZA-SANS, Gas phase heating method

  • SANS 5933:1978 Crucible swelling number of coal (gas-heating method)
  • SANS 5869:2008 Accelerated aging of vulcanized rubbers (Air-oven method)

NZ-SNZ, Gas phase heating method

  • AS/NZS 2341.13:1997 Methods of Testing Bitumen and Related Roadmaking Products Method 13: Long-Term Exposure to Heat and Air

Military Standard of the People's Republic of China-General Armament Department, Gas phase heating method

  • GJB 772.204-1989 Explosives test methods 100°C heating test
  • GJB 772.203-1989 Explosives test method 75℃ heating test
  • GJB 772.201-1989 Explosives test methods Explosives compatibility test Microcalorimetry
  • GJB 737.6-1994 Test methods for pyrotechnics chemicals Compatibility test Microcaloric thermal method
  • GJB 8083-2013 The measurement method of atmospheric coherence length
  • GJB 10179-2021 Thermal vacuum outgassing test method
  • GJB 772.402-1989 Test methods for explosives - Determination of moisture by gas chromatography
  • GJB 987.1-1990 Weather balloon test method hot air aging test
  • GJB 737.7-1993 Test method for pyrotechnics agent 75℃ heating test
  • GJB 7050-2010 Plat test method in turbulent flow for thermo-protection materials of missile at arc-heater
  • GJB 961-1990 Testing method for electrothermal performance of aircraft electrically heated glass
  • GJB 961A-2020 Test method for electrothermal performance of aircraft electrically heated glass

Professional Standard - Geology, Gas phase heating method

  • DZ/T 0064.74-1993 Groundwater quality inspection method Gas chromatography determination of gas

Professional Standard - Education, Gas phase heating method

  • JY/T 0574-2020 General Rules for Gas Chromatographic Analysis Methods
  • JY/T 021-1996 General rules for analytical gas chromatography methods

中国石油天然气总公司, Gas phase heating method

  • SY/T 0535-1994 Calculation method of heat and resistance of fire tube heating furnace

HU-MSZT, Gas phase heating method

Professional Standard-Ships, Gas phase heating method

GM Daewoo, Gas phase heating method

国家市场监督管理总局、中国国家标准化管理委员会, Gas phase heating method

  • GB/T 15914-2021 Monitoring and testing method for energy saving of steam heating equipments
  • GB/T 11062-2020 Natural gas—Calculation of calorific values, density, relative density and Wobbe indices from composition
  • GB/T 11969-2020 Test methods of autoclaved aerated concrete
  • GB/T 11026.10-2019 Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy
  • GB/T 5988-2022 Refractory products—Determination of permanent change in dimensions on heating

Group Standards of the People's Republic of China, Gas phase heating method

  • T/GDCKCJH 078-2023 Performance requirements and test methods for heating plate
  • T/CEC 673.1-2022 Perfluoroisobutyronitrile Gas Purity Test Method Part 1: Gas Chromatography
  • T/SDJKR 003-2022 Identification method of donkey bone-derived components in donkey-hide gelatin by gas chromatography
  • T/SDJKR 002-2022 Identification method of donkey skin-derived components in donkey-hide gelatin by gas chromatography

Hebei Provincial Standard of the People's Republic of China, Gas phase heating method

  • DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography

Association of German Mechanical Engineers, Gas phase heating method

Shaanxi Provincial Standard of the People's Republic of China, Gas phase heating method

Professional Standard - Commodity Inspection, Gas phase heating method

  • SN/T 2234-2008 Determination of profenofos residues in food for import and export.GC and GC-MS method
  • SN/T 1251-2003 Test method of furfural alcohol purity-Gas chromatography
  • SN/T 1495-2004 Determination of phthalates in cosmetics-Gas chromatography
  • SN/T 2463-2010 Method for the determination of polychlorinated biphenyls (PCBs) in textiles-GC method

Canadian Standards Association (CSA), Gas phase heating method

  • CSA CGA P.6-1993-1993 Testing Method for Measuring Thermal and Operating Efficiencies of Gas-Fired Pool Heaters First Edition
  • CSA P.11-07 UPD 1-2008 M閠hode d抏ssai pour mesurer l抏fficacit?et la consommation 閚erg閠ique des a閞othermes ?gaz premi鑢e 閐ition

VN-TCVN, Gas phase heating method

  • TCVN 3756-1983 Natural gas.Method for the determination of oxygen, nitrogen and methane by gas chromatography
  • TCVN 7499-2005 Bitumen.Test method for determination of loss on heating
  • TCVN 4298-1986 Natural gases.Method for the determination of calorific power

Professional Standard - Meteorology, Gas phase heating method

  • QX/T 273-2015 Monitoring method for atmospheric carbon monoxide concentration.Gas filter correlation

PL-PKN, Gas phase heating method

Chongqing Provincial Standard of the People's Republic of China, Gas phase heating method

  • DB50/T 08-2016 Energy Saving Monitoring Method for Forging Flame Heating Furnace

Beijing Provincial Standard of the People's Republic of China, Gas phase heating method

  • DB11/T 142-2002 Calculation method for electric energy balance of electric heating equipment

BE-NBN, Gas phase heating method

The American Road & Transportation Builders Association, Gas phase heating method

  • AASHTO T 179-2005 Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas phase heating method

  • GB/T 33956-2017 Methods of determination and calculation of heat balance in continuous reheating furnace for steel rolling
  • GB/T 35110-2017 Target optimization methods for marine shale gas exploration

KR-KS, Gas phase heating method

中华人民共和国国家卫生和计划生育委员会, Gas phase heating method

  • WS/T 175-1999 Exhaled air.Determnation of acetone.Gas chromatographic method
  • GB/T 16130-1995 Standard method for hygienic examination of aniline in air of residential areas--Gas chromatography
  • GB 11731-1989 Standard method for hygienic examination of nitrobenzene in the atmosphere of residential areas by gas chromatography
  • GB 11734-1989 Standard Method for Hygienic Inspection of Methyl-1605 in the Air of Residential Areas by Gas Chromatography

IN-BIS, Gas phase heating method

Professional Standard - Medicine, Gas phase heating method

  • YY/T 0641-2008 Standard Test Method for Transformation Temperature Of nickel.Titanium Alloys by Thermal analysis

International Electrotechnical Commission (IEC), Gas phase heating method

  • IEC 63078:2019 Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Gas phase heating method

  • GJB 5891.15-2006 Test method of loading material for initiating explosive device Part 15: Compatibility test Method of microcalormetry
  • GJB 5891.13-2006 Test method of loading material for initiating explosive device Part 13: Heat endurance test Method of 75℃ heat

Professional Standard - Public Safety Standards, Gas phase heating method

  • GA/T 1316-2016 GC and GC-MS examination methods for ketamine in hair and blood samples of forensic science
  • GA/T 1328-2016 Gas chromatography and gas chromatography-mass spectrometry methods for the detection of carbamazepine in forensic science biological samples
  • GA/T 1329-2016 GC and GC-MS examination methods for ketamine in urine of drug user in forensic science

TR-TSE, Gas phase heating method

  • TS 121-1979 STANDARD METHODS OF TEST FOR LOSS ON HEATING OF BITUM?NOUS METARIALS

Malaysia Standards, Gas phase heating method

Sichuan Provincial Standard of the People's Republic of China, Gas phase heating method

Professional Standard - Energy, Gas phase heating method

PT-IPQ, Gas phase heating method

AWS - American Welding Society, Gas phase heating method

  • C4.3/C4.3M-2004 Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation
  • C4.4/C4.4M-2004 Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches

司法部, Gas phase heating method

  • SF/T 0113-2021 Gas chromatography-mass spectrometry and gas chromatography test methods for cyanide in blood

GOSTR, Gas phase heating method

  • GOST 27077-1986 Thermoplastic fitting. Methods of determination of the fittings appearance alteration after heating

住房和城乡建设部, Gas phase heating method

  • JG/T 534-2018 Test method for thermal reliability of phase change materials for construction

国家质量监督检验检疫总局, Gas phase heating method

  • SN/T 4716-2016 Moisture and heat treatment methods for imported grain processing by-products
  • SN/T 4439-2016 Determination method of boiling point distribution of crude oil - high temperature gas chromatography

国家林业和草原局, Gas phase heating method

  • LY/T 3157-2019 Analysis method of chemical composition of rosin: capillary gas chromatography

Taiwan Provincial Standard of the People's Republic of China, Gas phase heating method

  • CNS 3634-1989 Basic Environmental Testing Procedures,Part 2 : Tests, Test B : Dry Heat




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved