Resin material industry

Resin material industry, Total:500 items.

In the international standard classification, Resin material industry involves: Insulating materials, Dentistry, Products of the chemical industry, Analytical chemistry, Refractories, Plastics, (No title), Protection of and in buildings, Installations in buildings, Coatings and related processes used in aerospace industry, Construction materials, Welding, brazing and soldering, Reinforced plastics, Products of the textile industry, Elements of buildings, Headgear. Clothing accessories. Fastening of clothing, Surface treatment and coating, Organic chemicals, Rubber and plastics products, Printed circuits and boards, Raw materials for rubber and plastics, Manufacturing forming processes, Materials for the reinforcement of composites, Pipeline components and pipelines, Materials for aerospace construction, Food products in general, Lubricants, industrial oils and related products, Paints and varnishes, Insulating fluids, Cellular materials, Hydraulic construction, Production in the chemical industry, Manufacturing processes in the rubber and plastics industries, Small craft, Electrical wires and cables, Paper and board, Bearings, Adhesives, Wood-based panels, Iron and steel products, Road vehicle systems, Medical equipment.

SE-SIS, Resin material industry

SIS 16 85 01-1963 Thermosetting resinbonded laminates for industrial use.
SIS 16 85 51-1967 Rod and round tubes of phenolic resin-bonded laminates for industrial use

RO-ASRO, Resin material industry

STAS 4233-1969 Raw materials for oak resin tannic acid extraction
STAS 7144-1980 Hard laminated materials RESIN BONDED PAPER SHEETS
STAS 10054-1975 PLASTICS Determination of the acetone soluble matter (resin content) of phenolic moulding materials
STAS 8455-1986 Wood chemical paste RESINOUS BLEACHED SULPHATE PULP FOR PAPER INDUSTRY

IN-BIS, Resin material industry

IS 6667-1972 Synthetic Resin Industry Glossary
IS 10011-1981 Specification for resin-based dental filling materials

CO-ICONTEC, Resin material industry

ICONTEC 2954-1992 The main material used in the cardboard and carton industry, internal resin sizing

Japanese Industrial Standards Committee (JISC), Resin material industry

JIS C 2263:1999 Resin rich mica paper materials
JIS C 2263 ERRATUM 1:2000 Resin rich mica paper materials (Erratum 1)
JIS C 6485:2008 Base materials for printed circuits -- Paper base, phenolic resin
JIS K 6755:1999 Plastics -- Epoxy resins and related materials -- Determination of easily saponifiable chlorine
JIS K 7246:2000 Plastics -- Epoxy resins and related materials -- Determination of total saponifiable chlorine

US-FCR, Resin material industry

FCR UFGS-32 12 18-2008 RESIN MODIFIED PAVEMENT SURFACING MATERIAL

Korean Agency for Technology and Standards (KATS), Resin material industry

KS P 5324-2006(2011) Dentistry resin based filling materials
KS P 5315-2014 Dental resin based filling materials
KS P 5324-2014 Dentistry resin based filling materials
KS F 4922-2007 Polyurea resin waterproofing membrane coating
KS C 2509-2002 Testing method for resin type soldering flux
KS C IEC 60893-3-6:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 6:Requirements for rigid laminated sheets based on silicone resins
KS C IEC 60893-3-6:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets based on silicone resins
KS F 4929-2010(2015) Ceramic-metal contain resin materials for waterproof and anticorrosion
KS C IEC 60893-3-5:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 5:Requirements for rigid laminated sheets based on polyester resins
KS C IEC 60893-3-4:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 4：Requirements for rigid laminated sheets based on phenolic resins
KS C IEC 60893-3-5:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets based on polyester resins
KS C IEC 60893-3-6:2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
KS C IEC 60893-3-7:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 7:Requirements for rigid laminated sheets based on polyimide resins
KS C IEC 60893-3-7:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets based on polyimide resins
KS F 4921-2016 Epoxy resin material for waterproof and anticorrosion of concrete structure
KS F 4929-2021 Ceramic-metal contain resin materials for waterproof and anticorrosion
KS M 3079-1979(1997) TESTING METHODS FOR POLYAMIDES(NYLON) MOLDING MATERIALS
KS F 4921-2016(2021) Epoxy resin material for waterproof and anticorrosion of concrete structure
KS F 4921-1999 Epoxy resin material for waterproof and anticorrosion of concrete structure
KS C IEC 60893-3-6-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets
KS C IEC 60455-3-2:2003 Resin based reactive compounds used for electrical insulation-Part 3:Specifications for individual materials-Sheet 2:Quartz filled epoxy resinous compounds
KS C IEC 60455-3-2:2015 Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous compounds
KS C IEC 60893-3-5-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets
KS C IEC 60893-3-7-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets
KS C IEC 60455-3-1:2003 Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 1：Unfilled epoxy resinous compounds
KS C IEC 60893-3-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 2:Requirements for rigid laminated sheets based on epoxide resins
KS C IEC 60893-3-3:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 3:Requirements for rigid laminated sheets based on melamine resins
KS C IEC 60455-3-11:2003 Specification for solventless polymerisable resinous compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 11：Epoxy resin－based coating powders
KS C IEC 60455-3-11:2020 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 3: Specifications for individual materials — Sheet 11: Epoxy resin-based coating powders
KS C IEC 60893-3-3:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-4:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-2:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she

Taiwan Provincial Standard of the People's Republic of China, Resin material industry

CNS 2985-1974 Urea Resin Molding Compounds
CNS 11074-1984 Melamine-Formaldehyde Molding Compounds
CNS 2986-1974 Methods of Test for Urea Resin Molding Compounds
CNS 11688-2000 Dentistry-Resin-Based Filling Materials
CNS 8643-1988 Roof Coating for Waterproofing(Acrulic Resin Type)
CNS 13062-1992 Methods of Test for Prepreg of Carbon Fiber and Epoxy Resins

Professional Standard - Ferrous Metallurgy, Resin material industry

YB/T 4131-2014 Phenolic resin for refractories
YB/T 4131-2005 Phenolic resins for refractory materials
YBJ 215-1988 YJ furan resin material anti-corrosion construction and acceptance regulations

Group Standards of the People's Republic of China, Resin material industry

T/CSRA 3-2020 Phenolic resin for electronic materials
T/CECS 10046-2019 Assessment standard for green building materials - Resin flooring material
T/CSRA 2-2020 Phenolic resin for fibre reinforcement composite
T/ZZB 2594-2021 Spheroidal graphite cast iron composite resin manhole cover for petrochemical industry
T/QGCML 299-2022 Phenolic resin foam material for coal mine filling and sealing
T/CAMMT 31-2020 Molding process of composite prepreg
T/FJBS 6-2023 Technical regulations for the application of cashew phenolic resin for building materials
T/QGCML 2053-2023 Carbon black materials for lithium battery industry
T/CHSA 013-2022 Technical Guideline for Chairside CAD/CAM Restoration of Resin-ceramic Composites
T/CNIA 0143-2022 Ultrapure Resin Vessels for Trace Impurity Analysis of Semiconductor Materials
T/CSCM 02-2023 Technical Specifications for Pyrolysis Recycling of Fiber Reinforced Resin Matrix Composites
T/CSAE 208-2021 Technical specification of epoxy resin for carbon fiber reinforced composite car floor

International Organization for Standardization (ISO), Resin material industry

ISO 4049:1978 Resin-based dental filling materials
ISO 4049:1988 Dentistry; resin-based filling materials
ISO 15034:1999 Composites - Prepregs - Determination of resin flow
ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
ISO 14322:2012 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
ISO 4583:1998 Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine
ISO 4583:1978 Plastics; Epoxide resins and related materials; Determination of easily saponifiable chlorine
ISO 14322:2018 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
ISO 1642:1975 Title missing - Legacy paper document
ISO 1642:1979 Plastics — Industrial laminated sheets based on thermosetting resins — Specification
ISO 1642:1987 Plastics; Industrial laminated sheets based on thermosetting resins; Specification
ISO 13651:1996 Plastics - Epoxy resins and related materials - Determination of total saponifiable chlorine

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Resin material industry

GB/T 24411-2009 Phenolic resin for friction materials
GB/T 14074-2017 Adhesives for wood industry and their resins test methods
GB/T 25043-2010 Multiaxial warp-knitted reinforcement for resin-matrix prepreg
GB 16331-1996 Hygienic standard of nylon 6 resins food packaging material
GB/T 38535-2020 Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT)
GB/T 1844.2-1995 Symbols of plastics and resins--Part 2: Fillers and reinforcing materials
GB/T 29324-2012 Fiber reinforced polymer matrix composite core for overhead electrical conductors
GB/T 14732-2006 Wood adhesives:urea formaldehyde,phenol formaldehyde and melamine formaldehyde resins
GB/T 14732-1993 Wood adhesives:urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins
GB/T 5009.99-2003 Method for analysis of hygienic standard of polycarbonate resin used as food containers and packaging materials
GB/T 1303.2-2002 Specification for industrial rigid laminated Sheets based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 3: Requirements for rigid laminated Sheets based on melamine resins
GB 4803-1994 Hygienic standard for polyvinyl chloride resin used as food container and packaging material

National Aeronautics and Space Administration (NASA), Resin material industry

NASA UFGS-09 67 23.13-2010 STANDARD RESINOUS FLOORING

RU-GOST R, Resin material industry

GOST 29326-2015 Plastics. Phenolic resins. Determination of reactivity of resols under acid conditions
GOST ISO 8620-1996 Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus
GOST 32660-2014 Polymer composites. Prepregs. Determination of resin flow
GOST R 51202-1998 Dental resin restorative materials. Technical requirements. Test methods
GOST 31574-2012 Dental resin restorative materials. Technical requirements. Test methods
GOST R 55926-2013 Edges material based paper impregnated with carbamide-formaldehyde resin. Specificafications
GOST 33846-2016 Polymer composites. Methods for determination of resins, fibers and voids in carbon composite
GOST 32683-2014 Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications
GOST R 52021-2015 Epoxy resins and related materials. Methods for determination of chlorine mass fraction
GOST R 52021-2003 Epoxy resins and related materials. Methods for determination of mass percentage of chlorine
GOST 32716-2014 Facing material based on impregnated papers with a deep degree or resin cure. Specifications

Professional Standard - Urban Construction, Resin material industry

CJ/T 130-2001 Composite material water grate of regenerated resins
CJ/T 121-2000 Composite material inspection well lid of regenerated resin

Society of Automotive Engineers (SAE), Resin material industry

SAE AMS3143A-2003 Powder Coating Materials, Epoxy
SAE AMS3135E-2001 (Noncurrent)Coating Material, Silicone Resin 205 Degrees C (400 Degrees F) Cure
SAE AMS3682B-1977 COATING MATERIAL, ELECTRICALLY CONDUCTIVE Silver - Organic Resin
SAE AMS3682C-1991 COATING MATERIAL, ELECTRICALLY CONDUCTIVE Silver - Organic Resin
SAE AMS3682D-1992 COATING MATERIAL, ELECTRICALLY CONDUCTIVE Silver - Organic Resin
SAE AMS3135A-1966 SILICONE RESIN COATING MATERIAL 400 F (204 C) Cure
SAE AMS3135B-1976 COATING MATERIAL, SILICONE RESIN 400° F (204° C) Cure
SAE AMS3135D-1994 COATING MATERIAL, SILICONE RESIN 205°C (400°F) Cure
SAE AMS3135C-1978 COATING MATERIAL, SILICONE RESIN 400° F (205° C) Cure
SAE AMS3590C-1991 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE AMS3590D-1992 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE AMS3590-1956 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenol-Formaldehyde
SAE AMS3590B-1978 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE AMS3590A-1958 PLASTIC SHEET, COPPER FACED Paper Reinforced Phenol-Formaldehyde
SAE AMS3607D-1980 PLASTIC SHEET Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3607-1948 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3607A-1953 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3607C-1964 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3607B-1963 PLASTIC SHEET AND PLATE Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3605-1946 PLASTIC SHEET, POST - FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3136-1962 PHENOLIC RESIN COATING MATERIAL, TFE PIGMENTED 300 F Cure
SAE AMS2980/4-1996 Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin
SAE AMS2980/4B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 4 - Purchasing Specification - Resin
SAE AMS3601C-2011 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
SAE AMS3601-1956 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
SAE AMS3601A-1958 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
SAE AMS3605B-1952 PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3605A-1948 PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3605D-1957 PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3605F-1998 Plastic Sheet, Post-Forming Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3605C-1954 PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS3605E-2011 PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE AMS2980/4A-2006 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification ?Resin
SAE AMS2980/4B-2014 Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin
SAE AMS3136D-1989 COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 150°C (300°F) Cure
SAE AMS3136C-1984 COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 150°C (300°F) Cure
SAE AMS3136B-1976 COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 300°F (149°C) Cure
SAE AMS3136A-1966 PHENOLIC RESIN COATING MATERIAL, TFE PIGMENTED 300 F (149 C) Cure
SAE AMS3731/9B-1993 (Noncurrent)Potting Compound, Epoxy Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS-S-83474-1998 Shims, Molded, Filled Resin Compound and Sheet Prepreg
SAE AMS-S-83474A-2010 Shims, Molded, Filled Resin Compound and Sheet Prepeg
SAE AMS3136E-2005 Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150 °C (302 °F) Cure
SAE AMS3731/4B-1993 (Noncurrent)Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

U.S. Military Regulations and Norms, Resin material industry

ARMY UFGS-32 12 18-2008 RESIN MODIFIED PAVEMENT SURFACING MATERIAL
ARMY MIL-P-13436 A VALID NOTICE 3-2013 PLASTIC SHEET, FILLED PHENOLIC, UNCURED
ARMY MIL-DTL-25421 C-2009 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY UFGS-09 67 23.14-2008 CHEMICAL RESISTIVE RESINOUS FLOORING [Superseded: ARMY UFGS-09 67 00]
ARMY MIL-P-25421 B NOTICE 2-2002 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B VALID NOTICE 1-1991 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B-1971 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY A-A-59134 VALID NOTICE 2-2009 Insulating Compound, Electrical, Epoxy, Colloidal Silica Filled for Potting and Encapsulation
ARMY MIL-P-55072 A (1)-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)
ARMY MIL-P-55072 A-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)

Professional Standard - Building Materials, Resin material industry

JC/T 1015-2006 Epoxy resin flooring coating
JC/T 1041-2007 Epoxy grouting resin for concrete crack

Professional Standard - Medicine, Resin material industry

YY 91042-1999 dental composite resin filling material

British Standards Institution (BSI), Resin material industry

BS EN 60893-3-6:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-5:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-4:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-2:2004+A1:2011 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-3:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-7:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins
BS ISO 15034:1999 Composites - Prepregs - Determination of resin flow
BS ISO 15034:2000 Composites. Prepregs. Determination of resin flow
BS EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-1:2012 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Types of industrial rigid laminated sheets
BS EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins
BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
BS EN IEC 60893-3-6:2004+A2:2018 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 61212-3-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes
BS EN 60455-3-1:2003 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unfilled epoxy resinous compounds - Sheet 1: Unfilled epoxy resinous compounds
BS 5664-3.11:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Epoxy resin-based coating powders
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Sheet 8: Resins for cable accessories
BS EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Resins for cable accessories
BS EN 60455-3-5:2002 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins - Sheet 5: Unsaturated polyester based impregnating resins
BS EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
BS EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins
BS EN 60893-3-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
BS EN 50655-1:2017 Electric cables. Accessories. Material characterization. Fingerprinting for resinous compounds
BS EN 50655-1:2023 Electric cables. Accessories. Material characterization - Fingerprinting for resinous compounds
BS EN 61212-2:2006 Insulating materials — Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes — Part 2: Methods of test
BS EN 60455-3-2:2003 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Quartz filled epoxy resinous compounds - Sheet 2: Quartz filled epoxy resinous compounds
BS EN 61212-3-2:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Sheet 2: Round laminated moulded tubes
BS EN 61212-3-1:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Sheet 1: Round laminated rolled tubes
BS 8204-6:2001 Screeds, bases and in-situ floorings - Synthetic resin floorings - Code of practice
BS 8204-6:2008+A1:2010 Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice
PD IEC/TR 60893-4:2014+A1:2017 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS 5689-3.2:1995 Varnished fabrics for electrical purposes. Specifications for individual materials. Glass fabric based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous or oleoresinous varnish
BS ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
BS ISO 14656:2000 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
BS EN 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods

German Institute for Standardization, Resin material industry

DIN 18556:1985 Testing of coating material for synthetic resin plasters and of synthetic resin plasters
DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN 53749:1970 Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State
DIN EN 60893-3-5:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003 + A1
DIN EN 60893-3-2:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003 + A1:201
DIN EN 60893-3-6:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003 + A1:
DIN EN 60893-3-7:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003 + A1
DIN 54815-1:1998 Pipes of filled polyester resin moulding materials - Part 1: Dimensions, materials, designation
DIN 53748:1970 Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials
DIN 40603:1977 Laminated products; sheets and strips of resin impregnated and compressed laminated wood
DIN EN 2375:1992-04 Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992
DIN EN 60893-2:2005 Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004
DIN 54815-2:1998 Pipes of filled polyester resin moulding materials - Part 2: Requirements, testings
DIN 46449:1970 Insulating Varnishes and Insulating Resin Materials for Electrical Purposes; Finishing Varnishes, Test Methods
DIN EN 60893-3-3:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003 + A1:
DIN IEC/TR 60893-4:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values (IEC/TR 60893-4:2014 + A1:2017)
DIN 16944:1988 Glass fibre reinforced reaction resin moulding materials; test methods

TR-TSE, Resin material industry

TS 93-1964 SYNTHETIC RES?N GLUE USED ?N WOOD INDUSTRY
TS 3398-1979 PLASTICS — EPOXIDE RESINS AND RELATED MATERIALS- DETERMINATION OF EASILY SAPONIFIABLE CHLORINE

Military Standards (MIL-STD), Resin material industry

DOD A-A-53604-1988 RESIN, ACRYLIC, DENTAL (TRAY MATERIAL)

SAE - SAE International, Resin material industry

SAE AMS3682E-1995 COATING MATERIAL@ ELECTRICALLY CONDUCTIVE SILVER - ORGANIC RESIN
SAE AMS3590E-1995 PLASTIC SHEET@ COPPER FACED PAPER REINFORCED PHENOLIC RESIN
SAE AMS3135F-2009 Coating Material@ Silicone Resin 400 Degree F (205 Degree C)
SAE AMS3135D-1984 Coating Material@ Silicone Resin 205 Degrees C (400 Degrees F) Cure
SAE AMS-S-83474B-2016 Shims@ Molded@ Filled Resin Compound and Sheet Prepeg
SAE AMS3136F-2016 Coating Material@ Phenolic Resin@ PTFE Filled Pigmented@ 150 °C (302 °F) Cure

Professional Standard - Agriculture, Resin material industry

GBn 88-1980 Food packaging material: polyethylene resin
GBn 89-1980 Food packaging material: polystyrene resin

Military Standard of the People's Republic of China-General Armament Department, Resin material industry

GJB 1331-1991 Specification for phenolic resins for ablation materials
GJB 1331A-2020 Specification for phenolic resins for ablation materials
GJB 9266-2017 Specification for modified epoxy resin infusion sealing materials
GJB 10305-2021 Specification for spray metallic coatings for resin matrix composites
GJB 1059.2-1990 Phenolic Resin Test Method for Viscosity Testing of Ablative Materials
GJB 9435-2018 Specification for microbead resin composite solid buoyancy materials for deep sea use
GJB 1059.3-1990 Phenolic resin test method for ablative materials Free phenol test
GJB 1059.1-1990 Phenolic resin test method for ablative materials Solid content test
GJB 1059.4-1990 Phenolic Resin Test Method for Ablative Materials Gel Time Test
GJB 2637-1996 Fatigue test method for carbon fiber resin matrix composite laminates

ISUZU - Isuzu Motors Ltd., Resin material industry

ISC-C92-042-2009 Polypropylene Resin Recycled Material Type II
ISC-C92-041-2009 Polypropylene Resin Recycled Material Type I

Association Francaise de Normalisation, Resin material industry

NF C26-183-5/A1*NF EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
NF C26-183-2*NF EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins.
NF ISO 15034:2001 Composites - Préimprégnés - Détermination de l'écoulement de résine
NF C26-183-4/A1*NF EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
NF C26-183-6/A2*NF EN IEC 60893-3-6/A2:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
NF C26-183-3*NF EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : specification for individual materials - Requirements for rigid laminated sheets based on melamine resins
NF C26-183-6/A1*NF EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins.
NF C26-183-6*NF EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
NF T57-616*NF ISO 15034:2001 Composites - Prepregs - Determination of resin flow
NF C26-183-7/A1*NF EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins.
NF C26-183-5*NF EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
NF C26-183-4*NF EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
NF C26-183-3/A1*NF EN 60893-3-3/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
NF C26-183-7*NF EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7 : specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
NF C26-183-5:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : requirements for rigid laminated sheets based on polyester resins.
NF C26-183-4:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : requirements for rigid laminated sheets based on phenolic resins.
NF C26-183-3:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for rigid laminated sheets based on melamine resins.
NF C26-163-5:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 5 : unsatured polyester based impregnating resins.
NF C26-163-5*NF EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 5 : unsaturated polyester based impregnating resins
NF T54-701:1988 Plastics. Industrial laminated sheets based on thermosetting resins. Specification.
NF C26-183-2:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminated sheets based on epoxyde resins.
NF C26-183-6:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : requirements for rigid laminated sheets based on silicone resins.
NF J95-046-1:2001 Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.
NF EN 2375:1992 Série aérospatiale - Matériaux préimprégnés de résine - Échantillonnage des lots de production.
NF C26-183-7:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for rigid laminated sheets based on polyimide resins.
NF C26-163-8*NF EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 8 : resins for cable accessories
NF C26-183-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1 : specification for individual materials - Requirements for types of industrial rigid laminated sheets.
NF C26-163-8*NF EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8 : specifications for individual materials - Resins for cable accessories
NF T51-524:1998 Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine.
NF L17-455:1988 Aéronautique et espace - Matériaux composites à base de préimprégnés de résine thermodurcissable - Résistance au pelage.
NF L17-702*NF EN 2375:1992 Aerospace series. Resin preimpregnated materials. Production batch sampling procedure.
NF C26-166-3-2*NF EN 61212-3-2:2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : round laminated moulded tubes

Professional Standard - Commodity Inspection, Resin material industry

SN/T 2813-2011 Determination of extracts in melamine-formaldehyde resin, nylon resin and polycarbonate resin of polymer materials for export food contact materials

TH-TISI, Resin material industry

TIS 360-1980 Standard for synthetic resin adhesives (phenolic and aminoplastic)for wood
TIS 691-1987(en) THAI INDUSTRIIAL STANDARD FOR EPOXY PAINT

International Electrotechnical Commission (IEC), Resin material industry

IEC 60893-3-6:2003+AMD1:2009+AMD2:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-6:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-5:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-6:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-5:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-6:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-4:2003+AMD1:2012 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-2:2003+AMD1:2011 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-5:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-6:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-3:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-6:2003/AMD2:2017 Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigi
IEC 60893-3-3:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-3:2003+AMD1:2011 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-7:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-2:2003/AMD1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
IEC 60893-3-7:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-4:2003/AMD1:2012 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigi
IEC 60893-3-7:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-2:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-6:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins; Amendment 1
IEC 60893-3-5:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-4:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-3:2003/AMD1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
IEC 60455-3-5:2001 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials; Sheet 5: Unsaturated polyester based impregnating resins
IEC 60893-3-7:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins; Amendment 1
IEC TR 60893-4:2014/AMD1:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014+AMD1:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC 60893-3-2:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-4:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 4: requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-5:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 5: requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-6:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 6: requirements for rigid laminated sheets based on silicone resins
IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
IEC 60455-3-8:2021 RLV Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
IEC 60893-2:2023 RLV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60893-2:2023 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60455-3-1:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials; Sheet 1: Unfilled epoxy resinous compounds
IEC 60893-3-3/COR2:1997 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-2:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-3:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-4:2003/COR1:2014 Corrigendum 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-1:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Requirements for types of industrial rigid laminated sheets
IEC 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheet
IEC 60455-3-2:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials; Sheet 2: Quartz filled epoxy resinous compounds
IEC 60893-3-7:1994 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; sheet 7: Requirements for rigid laminated sheets based on polyimide resins

KR-KS, Resin material industry

KS C IEC 60893-3-4-2018(2023) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-2-2018(2023) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-6-2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
KS C IEC 60893-3-3-2018(2023) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C 2112-2003(2023) Test method for solvent-free liquid resin for electrical insulation
KS C IEC 60455-3-8-2023 Resin based reactive compounds used for electrical insulation — Part 3-8: Specifications for individual materials — Resins for cable accessories
KS C IEC 60893-3-1-2018(2023) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-1: Specifications for individual materials — Type of industrial rigid laminated
KS C IEC 60455-3-11-2020 Specification for solventless polymerisable resinous compounds used for electrical insulation — Part 3: Specifications for individual materials — Sheet 11: Epoxy resin-based coating powders
KS C IEC 60893-3-2-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-3-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-4-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she

(U.S.) Ford Automotive Standards, Resin material industry

FORD M5J74-A-1990 MASONRY WATERPROOFER, SILICONE BASE

Professional Standard - Public Safety Standards, Resin material industry

GA 741-2007 Material for police uniform.Resin-finished interlinings with hair of woven fabrics
GA 731-2007 Material for police uniform.Unsaturation polyester resin button

AT-ON, Resin material industry

ONORM EN 24049-1993 Dentistry - Resin-based filling matenals (ISO 4049:1988)
ONORM EN 2375-1992 Aerospace series - Resin preimpregnated materials -Production batch sampling procedura

PL-PKN, Resin material industry

PN E29058-1963 Electric insulating mafcerials. Paper ocated with phenol resin
PN E29080-1988 Insulating materials Laminated sheets based on thermosetting resins
PN E29057-1962 Electric insulating matarials. Paper sections hardened with phenol resin
PN BN 3076-02-1966 Electrical insulation materials. Grade B epoxy hardened glass fiber panels

Hebei Provincial Standard of the People's Republic of China, Resin material industry

DB13/T 1589-2012 Thermosetting phenolic resins for foam materials

工业和信息化部, Resin material industry

HG/T 6059-2022 Green factory evaluation requirements for the polyurethane resin industry

IT-UNI, Resin material industry

UNI 7352-1974 Plastic material use, particle size analysis of polyvinyl chloride resin using water flow screening
UNI 5815-1974 Plastic material testing. Determination of ash content in polyvinyl chloride resin
UNI EN 5-1979 Determination of fuel resins in hydrocarbon fuels using the jet evaporation method
UNI 7353-1974 Use of plastic materials, pH determination of aqueous extracts of polyvinyl chloride resin
UNI 6449-1974 Plastic material testing. Determination of viscosity index of polyvinyl chloride resin solution

United States Navy, Resin material industry

NAVY QPL-18324-2012 PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION)
NAVY UFGS-09 67 23.15-2010 FUEL RESISTIVE RESINOUS FLOORING, 3-COAT SYSTEM
NAVY UFGS-09 67 23.16-2010 FUEL RESISTIVE RESINOUS FLOORING, 5-COAT SYSTEM
NAVY UFGS-09 67 23.16-2008 FUEL RESISTIVE RESINOUS FLOORING, 5-COAT SYSTEM [Superseded: NAVY UFGS-09 62 50.12]
NAVY A-A-59398-2004 GASKET MATERIAL, SILICONE GEL WITH MONEL MATRIX OR EQUIVALENT

CENELEC - European Committee for Electrotechnical Standardization, Resin material industry

EN 60893-3-2:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Rigid Laminated Sheets Based on Epoxide Resins (Includes Corrigendum 1995)
EN 60893-3-4:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 4: Requirements for Rigid Laminated Sheets Based on Phenolic Resins (Includes Corrigendum 1995)
EN 60893-3-5:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 5: Requirements for Rigid Laminated Sheets Based on Polyester Resins
EN 60893-3-6:1995 Specification for Industrial Rigid Laminated Sheet Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Requirements for Rigid Laminated Sheets Based on Silicone Resins
EN 60893-3-3:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials - Sheet 3: Requirements for Rigid Laminated Sheets Based on Melamine Resins (Includes Corrigendum 199
EN 60893-3-7:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Requirements for Rigid Laminated Sheets Based on Polymide Resins
EN 60893-3-2:1995/A1:1999 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Rigid Laminated Sheets Based on Epoxide Resins
EN 60893-2:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 2: Methods of Test
EN 60893-3-1:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Types of Industrial Rigid Laminated Sheets
EN 60455-3-5:2001 Resin Based Reactive Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 5: Unsaturated Polyester Based Impregnating Resins

AENOR, Resin material industry

UNE-EN 60893-3-6:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-2:2004/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-4:2004/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
UNE-EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
UNE-EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-5:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
UNE-EN 60893-3-3:2004/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
UNE-EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
UNE-EN 60893-3-7:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
UNE 61000:1984 VOCABULARY FOR THE REFRACTORIES INDUSTRY
UNE 21345-2:1977 ELECTRICAL INSULATING MATERIALS. VARNISHED FABRICS. SPECIFICATIONS FOR GLASS FABRICS WITH OLEORESINOUS VARNISH, POLYURETHANE, EPOXY OR SILICONE.
UNE-EN 2375:1993 AEROSPACE SERIES. RESIN PREIMPREGNATED MATERIALS. PRODUCTION BATCH SAMPLING PROCEDURE.
UNE-IEC/TR 60893-4:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
UNE-EN 60893-2:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test
UNE 21340-3-11:1993 SPECIFICATION FOR SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 11: EPOXY RESINBASED COATING POWDERS.

Danish Standards Foundation, Resin material industry

DS/EN 60893-3-2/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
DS/EN 60893-3-3/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
DS/EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
DS/EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
DS/EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation – Part 3-8: Specifications for individual materials – Resins for cable accessories
DS/EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
DS/IEC 455-3-11:1990 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resin-based coating powders
DS/EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
DS/EN 60893-3-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets

BELST, Resin material industry

STB 1246-2005 Materials heat insulating on base an urealformaldehyde resin. Specifications

Professional Standard - Aviation, Resin material industry

HB/Z 410-2013 Repair Technology of Resin Matrix Composite Parts
HB/Z 411-2013 Assembly Technology of Resin Matrix Composite Parts
HB/Z 409-2013 Machining Technology of Resin Matrix Composite Parts
HB/Z 350-2001 Composite resin transfer molding (injection) molding process
HB 20078-2011 General requirements for properties data of resin matrix composites for aerocraft
HB 5440-1989 Tensile-tensile fatigue test method for carbon fiber resin matrix composites
HB 7040-1994 Aeronautical Industry Metal Material Code
HB 5439-1989 Tension-compression and compression-compression fatigue test methods for carbon fiber resin composites
HB 7401-1996 Test method for moisture absorption of resin matrix composite laminates in hot and humid environment

ES-AENOR, Resin material industry

UNE 104-281 Pt.2-7-1986 Asphalt materials and modified asphalt emulsion materials. Asphalt and resin. Naphthalene
UNE 104-281 Pt.2-5-1986 Asphalt materials and modified asphalt emulsion materials. Asphalt and resin. Toluene and ash materials
UNE 53-401-1986 Determination of the volume of extractable materials in polycarbonate resins
UNE 104-281 Pt.2-3-1986 Asphalt materials and modified asphalt emulsion materials. Experimental methods for bitumen and resins. temperature
UNE 104-281 Pt.2-6-1986 Asphalt materials and modified asphalt emulsion materials. Experimental methods for bitumen and resins. phenol
UNE 104-281 Pt.2-4-1986 Asphalt materials and modified asphalt emulsion materials. Experimental methods for bitumen and resins. distillation
UNE 104-281 Pt.2-2-1986 Asphalt materials and modified asphalt emulsion materials. Experimental methods for bitumen and resins. viscosity
UNE 104-281 Pt.2-1-1986 Asphalt materials and modified asphalt emulsion materials. Experimental methods for bitumen and resins. Sample display
UNE 21-340 Pt.3-11-1993 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resinbased coating powders

European Committee for Electrotechnical Standardization（CENELEC）, Resin material industry

EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (Incorporates Amendment A1:
EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (Incorporates Amendment A1:
EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (Incorporates Amendment A1: 20
EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (Incorporates Amendment A1:
EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (Incorporates Amendment A1
EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (Incorporates Amendment A1
EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
EN IEC 60893-2:2023 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 5: Unsaturated polyester based impregnating resins

Professional Standard - Forestry, Resin material industry

LYJ 122-1992 Standard of engineering design for synthetic resins in woodworking industry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Resin material industry

GB/T 34006-2017 Cardanol modified phenolic resin for composite material
GB/T 14732-2017 Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins

American Society for Testing and Materials (ASTM), Resin material industry

ASTM D709-16 Standard Specification for Laminated Thermosetting Materials
ASTM D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM D2116-16(2021) Standard Specification for FEP Resin Molding and Extrusion Materials
ASTM D2291/D2291M-16 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM F641-98a Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM C722-94 Standard Specification for Chemical-Resistant Resin Monolithic Surfacings
ASTM F3131-14(2023) Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
ASTM D2133-66(1972) Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
ASTM D2133-81 Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
ASTM F641-98a(2003) Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F641-09 Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM D3307-16 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
ASTM D3307-10 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3307-21 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

未注明发布机构, Resin material industry

BS EN 60893-3-4:2004+A1:2012(2014) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3 - 4 : Specifications for individual materials — Requirements for rigid laminated sheets based on phenolic resins
BS EN ISO 4583:1998 Plastics — Epoxy resins and related materials — Determination ofeasily saponifiable chlorine
BS 6374-4:1984(1999) Lining of equipment with polymeric materials for the process industries — Part 4 : Specification for lining with cold curing thermosetting resins
BS 1204:1993 Specification for Type MR phenolic and aminoplastic synthetic resin adhesives for wood
DIN 16944:1973 Glass fibre reinforced reaction resin moulding materials; test methods

GM Europe, Resin material industry

GME TM 913500-1998 Faserwerkstoff, polyesterhatzgebunden Fibre Material, Bounded with Polyester Resin English/German

European Committee for Standardization (CEN), Resin material industry

EN ISO 4583:1998 Plastics - Epoxy Resins and Related Materials - Determination of Easily Saponifiable Chlorine Supersedes ISO 4583:1998; Superseded by EN ISO 21627-2:2003
EN 60893-3-1:2004 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-1: Specifications for individual materials — Requirements for types of industrial rigid laminated sheets

National Metrological Technical Specifications of the People's Republic of China, Resin material industry

JJF 1728-2018 Calibration Specification for Ultrasonic Testing Instruments for Resin Matrix Composites

Lithuanian Standards Office , Resin material industry

LST EN 60893-3-6-2004/A1-2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003/A1:2
LST EN 60893-3-5-2004/A1-2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003/A1:
LST EN 60893-3-2-2004/A1-2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003/A1:2011
LST EN 60893-3-4-2004/A1-2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003/A1:2
LST EN 60893-3-3-2004/A1-2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003/A1:2
LST EN 60893-3-7-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-7: Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003)
LST EN 60893-3-6-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-6: Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003)
LST EN 60893-3-5-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-5: Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003)
LST EN 60893-3-4-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-4: Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003)
LST EN 60893-3-3-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-3: Specifications for individual materials. Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003)
LST EN 60893-3-2-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-2: Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003)
LST EN 2375-2001 Aerospace series - Resin preimpregnated materials - Production batch sampling procedure
LST EN 60893-3-1-2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (IEC 60893-3-1:2012)

Professional Standard - Machinery, Resin material industry

JB/T 11846-2014 Lost foam casting pattern material.STMMA expandable copolymer resin
JB/T 10109-1999 Specification for solventless polymerisable resinous compounds used for electrical insulation specifications for individual materials unsaturated polyester impregnating resins

CZ-CSN, Resin material industry

CSN ON 34 6231-1967 Coppor-graphilc malcrial resin-bonded for the brushes of eleclrical maehines, Grade INI 45
CSN ON 34 6223-1964 Carbon phase materials used in artificial resin brushes for rotating motors. Logo G3

水利部, Resin material industry

SL/T 807-2021 Technical specifications for epoxy resin grouting materials for hydraulic buildings

YU-JUS, Resin material industry

JUS G.S1.814-1991 Plastics.Epoxide resins and related materials. Determination of easily saponifiable chlorine
JUS G.S2.682-1991 Plastics Phenolic resin powder.Sieve analysis using air-iet sieve apparatus
JUS G.S2.501-1983 Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water
JUS G.C2.600-1985 Plastics. Industrial laminated sheets based on thermosetting resins. Specification

Shandong Provincial Standard of the People's Republic of China, Resin material industry

DB37/T 3182-2018 Guidelines for the implementation of the safety production risk classification management and control system for enterprises in the synthetic resin industry
DB37/T 3183-2018 Implementation guidelines for the investigation and management system of hidden dangers of production safety accidents in enterprises in the synthetic resin industry

ZA-SANS, Resin material industry

SANS 1305:1980 Sealing compounds for the building industry, one-component, silicone-rubber-base

国家市场监督管理总局、中国国家标准化管理委员会, Resin material industry

GB/T 37195-2018 Technical specification for rehabilitation of pipeline corrosion prevention with resin

American National Standards Institute （ANSI), Resin material industry

ANSI/ASTM D6314:1998 Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Resin material industry

PREN 6085-1999 Aerospace Series Non-Metallic Materials Epoxy Surfacing Films (Edition P1)

ES-UNE, Resin material industry

UNE-EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (Endorsed by AENOR in November of 2012.)
UNE-EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories (Endorsed by AENOR in August of 2013.)
UNE-EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories (Endorsed by Asociación Española de Normalización in September of 2021.)

Professional Standard - Textile, Resin material industry

FZ/T 60041-2014 3D braided polymer matrix composites.Test method for tensile properties
FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60043-2014 3D braided polymer matrix composites.Test method for compression properties
FZ/T 60043-2013 Test method for compressive properties of resin-based three-dimensional braided composites
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites
FZ/T 60041-2013 Test method for tensile properties of resin-based three-dimensional braided composites

The American Road & Transportation Builders Association, Resin material industry

AASHTO M 284M/M 284-2008 Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements

Shanghai Provincial Standard of the People's Republic of China, Resin material industry

DB31/ 534-1996 Hygienic quality requirements for polyvinyl chloride resin used in food packaging materials