ZH
RU
ES

Three-point bending test of composite materials

Three-point bending test of composite materials, Total:147 items.

In the international standard classification, Three-point bending test of composite materials involves: Products of the textile industry, Construction materials, Plastics, Reinforced plastics, Materials for the reinforcement of composites, Materials for aerospace construction, Inorganic chemicals, Refractories, Testing of metals, Ceramics, Road vehicle systems, Welding, brazing and soldering, Textile fibres, Conducting materials, Insulating materials, Valves, Pipeline components and pipelines, Mechanical testing, Products of non-ferrous metals, Waxes, bituminous materials and other petroleum products, Powder metallurgy, Aerospace electric equipment and systems, Road vehicles in general, Semiconductor devices, Raw materials for rubber and plastics, Cellular materials, Sports equipment and facilities, Products of the chemical industry.

American Society for Testing and Materials (ASTM), Three-point bending test of composite materials

ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C1341-00(2005) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-00 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
ASTM C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6415/D6415M-06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets

International Organization for Standardization (ISO), Three-point bending test of composite materials

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO 19044:2016 Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen
ISO/CD 19044:2023 Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen

Association Francaise de Normalisation, Three-point bending test of composite materials

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF T51-120-5:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 5 : essai en flexion à moment constant.
NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
NF A03-159*NF EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.
NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.

Professional Standard - Aerospace, Three-point bending test of composite materials

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials
QJ 2305-1992 Test method for tensile properties of three-dimensional carbon/carbon composite materials

Professional Standard - Textile, Three-point bending test of composite materials

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites
FZ/T 60041-2014 3D braided polymer matrix composites.Test method for tensile properties
FZ/T 60043-2014 3D braided polymer matrix composites.Test method for compression properties
FZ/T 60043-2013 Test method for compressive properties of resin-based three-dimensional braided composites
FZ/T 60041-2013 Test method for tensile properties of resin-based three-dimensional braided composites

British Standards Institution (BSI), Three-point bending test of composite materials

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

German Institute for Standardization, Three-point bending test of composite materials

DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
DIN EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010

国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test of composite materials

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 40398.2-2021 Test method for C-C composites—Part 2: Flexural properties
GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue

VN-TCVN, Three-point bending test of composite materials

TCVN 1826-2006 Metallic materials.Wire.Reverse bend test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending test of composite materials

GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites
GB/T 33613-2017 Test method for tensile properties of 3D braided fabric and its polymer matrix composites
GB/T 33614-2017 Test method for compression properties of 3D braided fabric and its polymer matrix composites

Professional Standard - Agriculture, Three-point bending test of composite materials

GB/T 238-1984 Test method for repeated bending of metallic materials

RU-GOST R, Three-point bending test of composite materials

GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST R 56681-2015 Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST 26528-1998 Sintered metal materials, excluding hardmetals. Impact test method
GOST 26528-1985 Powder materials. Impact test method
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
PNST 96-2016 Ice hockey boards from composite materials. Technical requirements and test methods

Society of Automotive Engineers (SAE), Three-point bending test of composite materials

SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending test of composite materials

GB/T 238-2002 Metallic materials-Wire-Reverse bend test
GB/T 238-2013 Metallic materials.Wire.Reverse bend test
GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials
GB/T 235-2013 Metallic materials.Sheet and strip.Reverse bend test
GB/T 235-1999 Metallic materials--Sheet and strip 3mm thick or less--Reverse bend test

Professional Standard - Aviation, Three-point bending test of composite materials

HB 7624-1998 Bending fatigue test method for carbon fiber composite laminates
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
HB 8623-2021 Test method for curved beam strength of polymer matrix composites for aerospace applications

European Committee for Standardization (CEN), Three-point bending test of composite materials

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Danish Standards Foundation, Three-point bending test of composite materials

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Lithuanian Standards Office , Three-point bending test of composite materials

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Group Standards of the People's Republic of China, Three-point bending test of composite materials

T/CSRA 12-2021 Test method for flexural properties of aramid fiber Ⅲ reinforced materials
T/CSTM 00485-2022 Test method for flexural properties of fiber reinforced polymer matrix composite laminates

Malaysia Standards, Three-point bending test of composite materials

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Japanese Industrial Standards Committee (JISC), Three-point bending test of composite materials

JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature

工业和信息化部, Three-point bending test of composite materials

JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

工业和信息化部/国家能源局, Three-point bending test of composite materials

JB/T 13227-2017 In-situ bending-torsion composite mechanical properties testing system for solid materials
JB/T 13223-2017 In-situ tensile-bending composite mechanical property testing system for solid materials
JB/T 13224-2017 In-situ tensile-bending-torsion composite mechanical property testing system for solid materials

ES-UNE, Three-point bending test of composite materials

UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)

European Association of Aerospace Industries, Three-point bending test of composite materials

AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1

Korean Agency for Technology and Standards (KATS), Three-point bending test of composite materials

KS B ISO 7799-2004(2009) Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test

NL-NEN, Three-point bending test of composite materials

NVN-ENV 658-5-1994 Advanced technical ceramics. Mechanical properties for ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)

The American Road & Transportation Builders Association, Three-point bending test of composite materials

AASHTO T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending

未注明发布机构, Three-point bending test of composite materials

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

IT-UNI, Three-point bending test of composite materials

BELST, Three-point bending test of composite materials

STB 1758-2007 Tribo-fatigue. Method of combined tests of the toothed gearing materials to contact and bending fatigue

International Electrotechnical Commission (IEC), Three-point bending test of composite materials

IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials