ZH
RU
ES

Level 1 shading

Level 1 shading, Total:68 items.

In the international standard classification, Level 1 shading involves: Fluid power systems, Noise with respect to human beings, Packaging materials and accessories, Optics and optical measurements, Fruits. Vegetables, Ceramics, Fibre optic communications, Paper production processes, Pulps, Paper and board, Metrology and measurement in general.

Association Francaise de Normalisation, Level 1 shading

NF E48-658*NF ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle.
NF B43-404*NF EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
NF Q03-801*NF ISO 4094:2018 Paper, board and pulps - General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3

(U.S.) Ford Automotive Standards, Level 1 shading

FORD WSS-M5H33-A-2008 FABRIC, KNITTED FABRIC SUNSHADE GLASS ROOF ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M98P3-A-2008 SUN VISOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M3G131-A-2005 TAPE, VINYL FILM - PRESSURE SENSITIVE, EXTERIOR, BLACK-OUT *** TO BE USED WITH WSS-M99P1111-A ***
FORD WSS-M5H32-A-2014 FABRIC, KNITTED FABRIC BACK WINDOW POWER SUNSHADE 25% LIGHT TRANSMITTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1J215-A-2007 ENAMEL, AIR DRYING, WATER REDUCIBLE, LOW GLOSS BLACKOUT, LOW VOC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D776-A1-2013 ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D776-A2-2013 ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P96-B1-2008 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 1 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2A146-A1-2003 ALUMINUM ALLOY, BRIGHT ANODISING QUALITY SHEET AND STRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D776-B2-2014 ACRYLIC (PMMA), OPTICAL GRADE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
FORD WSS-M4D776-B2-2021 ACRYLIC (PMMA), OPTICAL GRADE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
FORD WSS-M4D776-B3-2014 ACRYLIC (PMMA), OPTICAL GRADE, HIGH HEAT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
FORD WSS-M4D776-B3-2021 ACRYLIC (PMMA), OPTICAL GRADE, HIGH HEAT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
FORD ESB-M4D100-A2-2005 POLYCARBONATE (PC), OPTICAL GRADE - COATED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M4D100-A1
FORD WSS-M4D776-B3-2013 ACRYLIC (PMMA), OPTICAL GRADE, HIGH HEAT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D776-B1
FORD WSS-M4D776-B4-2014 ACRYLIC (PMMA), OPTICAL GRADE, HIGH HEAT, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
FORD WSS-M4D776-B4-2021 ACRYLIC (PMMA), OPTICAL GRADE, HIGH HEAT, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
FORD WSS-M4D1052-A2-2013 POLYCARBONATE (PC), OPTICAL GRADE, LOW MELT FLOW, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1052-A1)
FORD WSS-M4D1052-A3-2013 POLYCARBONATE (PC), OPTICAL GRADE, LOW MELT FLOW, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1052-A1)
FORD WSK-M4D775-A2-2014 POLYCARBONATE (PC), MOLDING COMPOUND, OPTICAL GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D775-A1)
FORD WSK-M4D776-A2-2009 ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P96-B2-2008 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 2 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M1P96-B1
FORD WSS-M1P96-B3-2008 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 3 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M1P96-B1
FORD WSS-M1P96-B3-2009 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 3 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P96-B2-2010 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 2 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1P96-B1)
FORD WSS-M1P96-B1-2011 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 1 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2A146-A2-2003 ALUMINUM ALLOY, BRIGHT ANODISING QUALITY SHEET AND STRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2A146-A3-2003 ALUMINUM ALLOY, BRIGHT ANODIZING QUALITY SHEET AND STRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2A146-A4-2003 ALUMINUM ALLOY, BRIGHT ANODIZING QUALITY SHEET AND STRIP ***TO BE USED WITH FORD WSS-M99P1111-A***

National Metrological Technical Specifications of the People's Republic of China, Level 1 shading

JJF 2061-2023 Calibration Specification for Primary Reference Photovoltaic Modules

International Organization for Standardization (ISO), Level 1 shading

ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
ISO 22197-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide
ISO 4094:2017 Paper, board and pulps - General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
ISO 22197-1:2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide
ISO 17168-1:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 1: Removal of nitric oxide

RU-GOST R, Level 1 shading

GOST R ISO 389-4-2011 State system for ensuring the uniformity of measurements. Acoustics. Reference zero for the calibration of audiometric equipment. Part 4. Reference levels for narrow-band masking noise
GOST 27908-1988 Digital fibre-optics system joinis of unified automated communication circuit (UACC) primary network transmission. Nomenclature and main parameters
GOST R 8.798-2012 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the spectral radiance and relative spectral distribution of radiating power in the wavelength range from 0,3 to 25,0 ?m

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Level 1 shading

GB/T 8762.2-1988 Yttrium oxide and europium oxide of phosphor grade--Determination of calcium oxide content--N2O-C2H2 flame atomic absorption spectrophotometric method

European Association of Aerospace Industries, Level 1 shading

AECMA PREN 2712-007-1991 Aerospace Series Single and Multicore Electrical Cables Screened (Spiral) and Jacketed for General Use Operating Temperatures Between -55 and +150 Degrees Celsius UV Laser Printable Product Standard
AECMA PREN 2712-006-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 150 Degrees C Part 006: Screened (Braided) and Jacketed, CO2 Laser Printable Product Standard Edition P 1
AECMA PREN 2712-005-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 150 Degrees C Part 005: Screened (Spiral) and Jacketed, CO2 Laser Printable Product Standard Edition P 1
AECMA PREN 2712-007-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures Between - 55 Degrees C and 150 Degrees C Part 007: Screened (Spiral) and Jacketed, UV Laser Printable Product Standard Edition P 1

American Society for Testing and Materials (ASTM), Level 1 shading

ASTM E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2002) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests

British Standards Institution (BSI), Level 1 shading

BS ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
BS ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
BS ISO 22197-1:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Removal of nitric oxide
BS ISO 4094:2017 Paper, board and pulps. General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3

European Committee for Standardization (CEN), Level 1 shading

EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018)

Defense Logistics Agency, Level 1 shading

DLA MIL-PRF-85045/32-2013 CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), CABLE CLASS SM AND MM, LOW SMOKE ZERO HALOGEN WITH EXTENDED PERFORMANCE CHARACTERISTICS (METRIC)

AENOR, Level 1 shading

UNE-ISO 22197-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Part 1: Removal of nitric oxide

Korean Agency for Technology and Standards (KATS), Level 1 shading

KS M ISO 4094:2021 Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
KS L ISO 22197-1:2008 Fine ceramics (advanced ceramics, advanced technical ceramics)-Test method for air-purification performance of semiconducting photocatalytic materials-Part 1:Removal of nitric oxide
KS L ISO 22197-1:2022 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide

KR-KS, Level 1 shading

KS M ISO 4094-2021 Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
KS L ISO 22197-1-2022 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide

Japanese Industrial Standards Committee (JISC), Level 1 shading

JIS R 1751-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Test method for air purification performance of photocatalytic materials under indoor lighting environment -- Part 1: Removal of nitric oxide

German Institute for Standardization, Level 1 shading

DIN ISO 22197-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide (ISO 22197-1:2007)