ZH
RU
ES

Solid UV test method

Solid UV test method, Total:499 items.

In the international standard classification, Solid UV test method involves: Terminology (principles and coordination), Products of the textile industry, Glass, Analytical chemistry, Organic chemicals, Optical equipment, Paints and varnishes, Optics and optical measurements, Products of the chemical industry, Electrical and electronic testing, Wood-based panels, Protection against fire, Air quality, Installations in buildings, Adhesives, Road vehicle systems, Water quality, Petroleum products in general, Plastics, Metrology and measurement in general, Radiation measurements, Medical equipment, Optoelectronics. Laser equipment, Semiconductor devices, Road engineering, Fuels, Components and accessories for telecommunications equipment, Construction materials, Structures of buildings, Waxes, bituminous materials and other petroleum products, Pharmaceutics, Clothes, Measurement of volume, mass, density, viscosity, Lubricants, industrial oils and related products, Paint ingredients, Inorganic chemicals, Beverages, Fibre optic communications, Surface treatment and coating, Sports equipment and facilities, Wastes, Microbiology, Vocabularies, Ceramics, Non-destructive testing, Farm buildings, structures and installations, Domestic, commercial and industrial heating appliances, Insulating fluids, Galvanic cells and batteries, Metalliferous minerals, Refractories, Mechanical testing, Insulating materials, Environmental testing, Environmental protection, Soil quality. Pedology, Particle size analysis. Sieving, Coals, Kitchen equipment, Integrated circuits. Microelectronics, Earthworks. Excavations. Foundation construction. Underground works, Veterinary medicine, Farming and forestry, Laboratory medicine, Milk and milk products, Non-ferrous metals, Rubber, Natural gas, Protection against dangerous goods, Rubber and plastics products, Fuel cells, Hydraulic fluids, Elements of buildings, Alarm and warning systems, Fluid power systems.

Hunan Provincial Standard of the People's Republic of China, Solid UV test method

DB43/T 2130-2021 Ultraviolet Fluorescent Sulfur Meter Test Method

Professional Standard - Electron, Solid UV test method

SJ/T 11818.1-2022 Semiconductor UV-emitting diodes Part 1: Test methods
SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method
SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
SJ 2658.2-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward voltage drop
SJ 2658.3-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for backward voltage
SJ 2658.8-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for normal radiance
SJ 2658.7-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for radiant flux
SJ 2658.10-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for modulated wideband
SJ 2658.6-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power
SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
SJ 2658.11-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for pulse response characteristics
SJ 2658.1-1986 Methods of measurement for semiconductor infrared diodes General rules
SJ 2658.13-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power temperature coefficient
SJ/T 10143-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS112/CT74LS112 dual J-K negative-edge flip-flop
SJ 2757-1987 Method of measurement by infra-red reflection for charge carrier concentraiton of heavily doped semiconductors
SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
SJ 2658.9-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for the intensity space distribution and half-intensity angle of radiation

Military Standard of the People's Republic of China-General Armament Department, Solid UV test method

GJB 7361-2011 The measuring methods for parameters of military ultraviolet detectors
GJB 8127-2013 Measuring methods for parameters of ultraviolet focal plane arrays
GJB 6925-2009 The measurement method of ultrabiolet radiation for target and environment
GJB 332A-2004 Test method for linear expansion coefficient of solid materials
GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
GJB 2365-1995 Solid rocket motor stationary test test method
GJB 772.304-1991 Test methods for explosives - Electrical method for determination of detonation velocity of solid explosives
GJB 772.407-1989 Explosives test methods: UV spectrophotometric determination of components of TNT/RDX injected explosives
GJB 1059.1-1990 Phenolic resin test method for ablative materials Solid content test
GJB 2365B-2021 Test method for static test parameters of solid rocket motor
GJB 2365A-2004 Test method for static test parameters of solid rocket motor
GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
GJB 9923-2021 Solid launch vehicle test launch cycle assessment method
GJB 330-1987 Test method for average specific heat capacity of solid materials from room temperature to 800°C
GJB 1059.1A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 1: Solids Content Test
GJB 1802-1993 Test method for average linear expansion coefficient of low expansion rigid solid materials
GJB 604.2-1988 Test methods for explosives used in nuclear weapons - Determination of linear expansion coefficient of solid explosives
GJB 10018-2021 Composite solid propellant fixed load test and equilibrium modulus determination method
GJB 1264.5-1994 Test methods for aviation turbine engine lubricating oils - Determination of solid particulate impurities

Professional Standard - Machinery, Solid UV test method

JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography

Korean Agency for Technology and Standards (KATS), Solid UV test method

KS K 0850-2014 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
KS K 0850-2019 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
KS I ISO 21258:2012 Stationary source emissions-Determination of the mass concentration of dinitrogen monoxide(N2O)-Reference method:Non-dispersive infrared method
KS M ISO 24443:2014 Cosmetics — Sun protection test methods — In vitro determination of UVA protection
KS C 2105-2003(2018)
KS C 2004-1998 TEST METHOD FOR THE PROOF TRACKING INDICES OF SOLID ELECTRICAL INSULATING MATERIALS
KS C IEC 60167:2002 Methods of test for the determination of the insulation resistance of solid insulating materials
KS C IEC 60167:2017 Methods of test for the determination of the insulation resistance of solid insulating materials
KS B 0533-2005 Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS C 2127-1996(2016) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 2131-1996(2016) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS D 8341-2-2002 Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys－Part 2：Test for light fastness to ultra－violet lignt
KS B 0533-1995 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces
KS G ISO 20957-8:2014 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
KS G ISO 20957-8:2020 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid UV test method

GB/T 7962.18-1987 Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
GB/T 7962.17-1987 Colourless optical glass test methods--Least deviation angular test method for refractive index in the ultraviolet and infrared wave band
GB/T 15489.8-1995 Colour filter glass test methods Resistance UV irradiating stability
GB/T 7962.17-2010 Test methods of colourless optical glass.Part 17:Autocollimation test method for refractive index in the ultraviolet and infrared wave band
GB 12791-1991 Performance requirements and test methods for point ultraviolet flame detectors
GB/T 15175-1994 Measurement methods for main parameter of solid-state lasers
GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
GB/T 10064-2006 Methods of test for the determination of the insulation resistance of solid insulating materials
GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
GB/T 14862-1993 Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB 7265.2-1987 Test method of microwave complex permittivity of solid dielectric "open cavity" method
GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
GB/T 17473.1-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content

American Society for Testing and Materials (ASTM), Solid UV test method

ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM D4144-94(2005) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D4144-94(2010) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D4144-94(1999) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D4144-94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D2008-12(2018) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM F1747-96 Test Method for External Fixator Joints (Withdrawn 2000)
ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM F1748-96 Test Method for External Fixator Subassemblies (Withdrawn 2000)
ASTM D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
ASTM D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM D7183-18 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D1768-89(2003) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
ASTM D7183-18a(2023) Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7183-18a Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
ASTM D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7183-18ae1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM F1745-96 Test Method for External Fixator Connectors (Withdrawn 2000)
ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
ASTM D4359-90(2006) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D7579-09 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D757-77 Standard test method for determination of pyrolysis solids content in pyrolysis liquids by methanol solids filtration method
ASTM D2621-87(2000) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D2621-87(1995)e1 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D4359-90(2000)e1 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D4359-90(2019) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM E3179-18 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM C914-09(2022) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM G134-95(2006) Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM E3351-22 Standard Test Method for Detection of Nitric Oxide Production In Vitro
ASTM D6994-10 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D5744-07e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D4842-90(1996) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM D4842-90(2001) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM G134-95(2001)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM E289-99 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D2621-87(2011) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM E289-04 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM F2477-07 Standard Test Methods forin vitro Pulsatile Durability Testing of Vascular Stents
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D6393-99(2006) Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393-99 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM D2508-93 Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM D2621-87(2005) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D1389-06 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
ASTM D1389-07 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM E289-04(2010) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM F2477-19 Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents
ASTM D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-98 Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-14 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM G72-01 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G72-82(1996)e1 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM E2618-13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
ASTM E878-01 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
ASTM E878-96 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
ASTM E878-01(2005) Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
ASTM E878-11 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
ASTM D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2023) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D5232-92(2003) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM D4804-19 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D5231-92(1998) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D4804-19a Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D3926-05(2019) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D5744-96(2001) Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

国家市场监督管理总局、中国国家标准化管理委员会, Solid UV test method

GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4：Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
GB/T 6324.10-2020 Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method

European Committee for Electrotechnical Standardization（CENELEC）, Solid UV test method

EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD) - General requirements and test methods

CENELEC - European Committee for Electrotechnical Standardization, Solid UV test method

EN 61228:1994 Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning (Incorporates Amendment A1: 1996)

CN-QIYE, Solid UV test method

Q/GDW 1978-2013 Ultraviolet imaging detection method for electric fittings corona test

Professional Standard - Aerospace, Solid UV test method

QJ 1991-1990 Vacuum—Test method for mass loss of materials irradiated by ultraviolet light
QJ 2289-1992 Solid state relay test method
QJ 1368-1988 External pressure test method for solid rocket motor combustor casing
QJ 2443-1993 Solid strategic missile proficiency test method
QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
QJ 1359-1988 Composite solid propellant detonation heat test method isothermal method
QJ 2610-1994 Test method for solid rocket motor nozzle swing angle
QJ 970-1986 Rigid solid average linear expansion coefficient test method
QJ 1522-1988 Test method for low temperature linear thermal expansion coefficient of rigid solid
QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°
QJ 3236-2005 Measurement Method of Negative Thrust in Static Test of Solid Rocket Motor
QJ 3312-2008 Thrust Vector Measurement Method for Static Test of Solid Rocket Motor
QJ 2038.1-1991 Test method for bonding strength of solid rocket motor combustor interface Pull-off method
QJ 2038.2-1991 Solid Rocket Motor Combustion Chamber Interface Bonding Strength Test Method Shear Method

European Committee for Standardization (CEN), Solid UV test method

EN ISO 24442:2022 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022)
EN ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011)
CEN EN 13523-10-2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
EN 16630:2015 Permanently installed outdoor fitness equipment - Safety requirements and test methods
EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021)
EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
EN ISO 11985:1997 Ophthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation (in Vitro Method) ISO 11985:1997

International Organization for Standardization (ISO), Solid UV test method

ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection
ISO 20179:2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
ISO/CD 23675 Cosmetics — Sun protection test Methods — In Vitro determination of Sun Protection Factor
ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content
ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases

Association Francaise de Normalisation, Solid UV test method

NF T75-613*NF EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection.
NF EN 16630:2015 Modules fixes d'entraînement physique de plein air - Exigences de sécurité et méthodes d'essai
NF EN 14187-8:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 8 : détermination du vieillissement artificiel par rayonnement UV
NF EN 13523-10:2017 Tôles prélaquées - Méthodes d'essai - Partie 10 : résistance à un rayonnement UV fluorescent et à la condensation de l'eau
NF EN 13758-1/IN1:2007 Textiles - Propriétés de protection contre le rayonnement UV solaire - Partie 1 : méthode d'essai pour étoffes destinées à l'habillement
NF EN 13758-1+A1:2007 Textiles - Propriétés de protection contre le rayonnement UV solaire - Partie 1 : méthode d'essai pour étoffes destinées à l'habillement
NF EN 3475-706:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 706 : marquabilité laser UV
NF EN ISO 11369:1997 Qualité de l'eau - Dosage de certains agents de traitement des plantes - Méthode par chromatographie en phase liquide haute performance (CLHP) avec détection UV après extraction solide-liquide
NF P98-897-8*NF EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8 : determination of the artificial weathering by UV-irradiation
NF P98-897-8:2003 Cold applied joint sealants - Part 8 : test method for the determination of the artificial weathering by UV-irradiation.
XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
NF EN 480-8:2012 Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 8 : détermination de l'extrait sec conventionnel
NF U47-016:2010 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.
NF EN 3032:1994 Série aérospatiale - Méthode d'essai pour films lubrifiants solides - Mesurage de l'épaisseur
NF U47-017:2010 Animal health analysis methods - Detection of antibodies against equine Rhinopneumonia by the Complement Fixation Test
NF P21-384*NF EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners
NF U47-016:2002 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.

British Standards Institution (BSI), Solid UV test method

BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
BS IEC 60747-14-11:2021 Semiconductor devices - Semiconductor sensors. Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
BS EN 14187-8:2003 Cold applied joint sealants - Test method for the determination of the artificial weathering by UV-irradiation
BS EN 14187-8:2017 Tracked Changes. Cold applied joint sealants. Test methods. Determination of the artificial weathering by UV-irradiation
BS EN 50289-4-17:2015 Tracked Changes. Communication cables. Specifications for test methods. Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
BS EN ISO 11369:1997 Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
22/30466943 DC BS EN 60794-1-214. Optical fibre cables - Part 1-214. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
BS EN 13523-10:2017 Tracked Changes. Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
BS ISO 21820:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
DD CEN/TS 15883:2009 Residential solid fuel burning appliances. Emission test methods
20/30422444 DC BS IEC 61196-1-212. Coaxial communication cables. Part 1-212. Environmental test methods. UV stability
19/30390371 DC BS IEC 60747-14-11. Semiconductor devices. Part 14-11. Semiconductor sensors. Test method of surface acoustic wave based integrated sensor for measuring ultra violet, illumination and temperature
18/30362458 DC BS IEC 60747-14-11. Semiconductor devices. Part 14-11. Semiconductor sensors. Test method of surface acoustic wave based integrated sensor for measuring ultra violet, illumination and temperature
22/30419490 DC BS EN ISO 22523. External limb prostheses and external orthoses. Requirements and test methods
BS 8628:2022 Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal…
BS 2782-4 Method 434B:1977 Methods of testing plastics - Chemical properties - Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract
BS 2782-5 Method 540C:1988 Methods of testing plastics - Optical and colour properties, weathering - Determination of ultraviolet radiation intensity using polysulphone film
20/30349837 DC BS ISO 21820. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analyzing polytypes of boron and nitrogen doped SiC crystals
21/30390982 DC BS 8628. Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal...
BS EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems. Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases
BS ISO 22066:2020 Water quality. Determination of total cyanide. Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
BS EN 1860-1:2013+A1:2017 Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels. Requirements and test methods
BS EN 60749-3:2017 Semiconductor devices. Mechanical and climatic test methods - External visual examination
BS EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
BS ISO 10771-1:2015 Tracked Changes. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
BS 7251-13:1995 Orthopaedic joint prostheses - Method for determination of resistance to torque of head fixation of stemmed femoral components

Group Standards of the People's Republic of China, Solid UV test method

T/GAMA 29-2023 Optical performance testing method for 3D printed UV projectors
T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
T/CSAE 72-2018 Test and evaluation method for uv penetration resistance of automotive coatings
T/CSBM 0026-2022 In vitro mineralization test method of bioactive glass
T/SHRH 008-2018 Cosmetics -In Vitro Skin Irritation Test Method（SIT）
T/CSBM 0014-2021 Test methods for in vitro pulsatile durability testing of cardiac occluder
T/SHRH 007-2018 Cosmetics -In Vitro Skin Irritation Test Method（ET-50）
T/KCH 002-2022 Test method for gastric bypass stent based on tensile force in vitro
T/ZHCA 009-2019 Method of skin irritation test in vitro for face cream cosmetic products-In vitro skin irritation test with reconstructed skin model
T/SHRH 023-2019 Skin barrier efficacy test of cosmetics - In vitro reconstructed human skin test method
T/SHSOT 004.2-2022 Performance guideline for in vitro toxicology testing methods—— Part 2：Assessment of proposed similar or modified in vitro reconstructed human epidermis (RhE) test methods for skin irritation testing
T/ZHCA 013-2021 Method of eye irritation test in vitro for facial cleanser cosmetic products - In vitro eye irritation test with reconstructed human cornea-like epithelial model
T/SHRH 021-2019 Comestics whitening efficacy test- In vitro Reconstructed human skin contaning melanocytes test method
T/ZHCA 021-2022 In vitro human fibroblast activity test method for cosmetic firming efficacy test
T/CSBME 045-2022 Standard test methods for hydrodynamic performance of heart valve substitutes implanted by transcatheter techniques
T/SHRH 044-2022 Testing method for repairing and relieving efficacies of cosmetics based on UV induced skin erythema model
T/LNBHXH 005-2023 Test method for in vitro human skin model evaluation of oil control efficacy of cosmetics
T/LNBHXH 001-2023 In vitro human epidermal model test method for evaluation of moisturizing efficacy of cosmetics
T/LNBHXH 002-2023 Test method for in vitro human skin model evaluation of cosmetic firming efficacy
T/LNBHXH 004-2023 Test method for in vitro human skin model evaluation of soothing efficacy of cosmetics
T/ZHCA 020-2022 Cosmetic Repair Efficacy Test In Vitro Human Fibroblast Migration Ability Test Method
T/CSBME 044-2022 Standard test methods for durability testing of heart valve substitutes implanted by transcatheter techniques

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Solid UV test method

GB/T 35241-2017 Test methods for volatile content of ultraviolet curable coatings for wood products

YU-JUS, Solid UV test method

JUS M.A5.013-1991 Cone. Methods for testing of internat and external cones
JUS N.R2.503-1983 Aluminium electrolytic capacitors with solid and non-solid electrolyte. Selection of methods of test and general reguiremen ts

ZA-SANS, Solid UV test method

SANS 6320:2003 Textiles - Solar UV protective properties - Method of test for apparel fabrics

Shandong Provincial Standard of the People's Republic of China, Solid UV test method

DB37/T 2641-2015 Technical requirements and detection methods of portable multi-gas measurement system by ultraviolet absorption method

Standard Association of Australia （SAA）, Solid UV test method

AS 3558.5:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of degradation by ultraviolet light
AS 1141.34:2018 Methods for sampling and testing aggregates, Method 34: Organic impurities other than sugar
AS 1580.301.2:1990(R2013)
AS 1683.2:2001 Methods of test for elastomers - Latex, rubber - Determination of total solids content
AS 1807.23:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of intensity of radiation from germicidal ultraviolet lamps
AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure

PL-PKN, Solid UV test method

PN P04990-1989 Methods of chemical tests Knitted medical articles Determination of ultraviolet radiation absorbance
PN F06100-08-1988 Furniture Testing methods for the properties of lacquered and decorative luminated surfaces Determination of ultraviolet light resistance and light resistance degree
PN E04404-1986 Solid insulation materials Methods of test for electric strength at power frequencies

Professional Standard - Ferrous Metallurgy, Solid UV test method

YB/T 5094-2005 Determination of apparent colour of solid coumarone-indene resin

工业和信息化部, Solid UV test method

YB/T 5094-2016 Method for determination of appearance color of solid coumaron-indene resin
SJ/T 11702-2018 Semiconductor integrated circuit serial peripheral interface test method

Indonesia Standards, Solid UV test method

SNI 06-0480-1989 Solid plastic materials, Test method for density
SNI 06-3268-1994 Solid and liquid paraffin wax, Specification and test method
SNI 03-0348-1989 Solid concrete bricks, Specification and test method

RU-GOST R, Solid UV test method

GOST R 8.588-2001 State system for ensuring the uniformity of measurements. Ultraviolet radiometers for ozone monitoring. Methods for verification
GOST R 8.590-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification
GOST R 8.627-2007 State system for ensuring the uniformity of measurements. Measurements of coefficients of regular and diffuse transmittance of ultraviolet radiation. Methods for measurements
GOST R 8.640-2008 State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods
GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
GOST R ISO 8573-4-2005 Compressed air. Part 4. Test methods for solid particle content
GOST R ISO 16256-2015 Clinical laboratory testing and in vitro diagnostic test systems. Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
GOST R 55031-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of stability to ultra-violet radiation

VDI - Verein Deutscher Ingenieure, Solid UV test method

VDI 2631-1968 PRUeFEN VON INNEN- UND AUssENKEGEL; PRUeEFMETHODE UND PRUeF- MITTEL

KR-KS, Solid UV test method

KS P ISO 22523-2016 External limb prostheses and external orthoses — Requirements and test methods
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS G ISO 20957-8-2020 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods

NZ-SNZ, Solid UV test method

AS/NZS 4547.5:2004 Methods of testing wool packs for greasy wool Method 5: Strength of fabric after exposure to ultraviolet radiation
AS/NZS 1580.483.2:1994 Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV-Condensation Type Instruments

国家药监局, Solid UV test method

YY/T 1782-2021 Test method for mechanical properties of orthopedic external fixation braces
YY/T 1764-2021 Test methods for axial, bending and torsional durability of vascular stents in vitro

Danish Standards Foundation, Solid UV test method

DS/IEC 61196-1-212:2021 Coaxial communication cables – Part 1-212: Environmental test methods – UV stability
DS/EN 13758-1+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
DS/ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
DS/CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
DS/EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation

International Electrotechnical Commission (IEC), Solid UV test method

IEC 61196-1-212:2021 Coaxial communication cables - Part 1-212: Environmental test methods - UV stability
IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
IEC 60747-14-11:2021 Semiconductor devices - Part 14-11: Semiconductor sensors - Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature

PH-BPS, Solid UV test method

PNS ASTM C1603:2021 Standard Test Method for Measurement of Solids in Water

未注明发布机构, Solid UV test method

GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
BS 1881-112:1983(1998) Testing concrete — Part 112 : Methods of accelerated curing of test cubes

German Institute for Standardization, Solid UV test method

DIN 51700:2015-12 Testing of solid fuels - Generalities and index of methods of test
DIN EN 13758-1:2007-03 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
DIN EN 13523-10:2023-08 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-10 (2017-05).
DIN EN 13523-10:2017-05 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
DIN EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011); German version EN ISO 24442:2011
DIN CEN/TS 15883:2010-02*DIN SPEC 1101:2010-02 Residential solid fuel burning appliances - Emission test methods; German version CEN/TS 15883:2009
DIN EN 14187-8:2017-07 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2017
DIN EN 14836:2017 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for the determination of the resistance to exposure to ultra violet light artificial weathering; German and English version prEN 14836:2017
DIN EN ISO 11369:1997-11 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997
DIN EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003
DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN ISO 20179:2007-10 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005)
DIN EN 1860-1:2003 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels, requirements and test methods; German version EN 1860-1:2003
DIN EN 3030:1994-04 Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994
DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 15250 Berichtigung 1:2015-05 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007, Corrigendum to DIN EN 15250:2007-06
DIN EN 15250:2007-06 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 / Note: DIN 18840 (2005-08) remains valid alongside this standard until 2007-09-01.*To be replaced by DIN EN 15250 (2012-10).

ES-UNE, Solid UV test method

UNE-EN 4057-307:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation (Endorsed by AENOR in April of 2007.)
UNE-CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation

Lithuanian Standards Office , Solid UV test method

LST EN 13758-1+A1-2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
LST EN 14187-8-2004 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST HD 568 S1-2002 Methods of test for the determination of the insulation resistance of solid insulating materials (IEC 60167:1964)

AENOR, Solid UV test method

UNE-EN 13758-1:2002+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
UNE-EN ISO 11369:1998 WATER QUALITY. DETERMINATION OF SELECTED PLANT TREATMENT AGENTS. METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH UV DETECTION AFTER SOLID-LIQUID EXTRACTION. (ISO 11369:1997).
UNE-CEN/TS 15883:2010 Residential solid fuel burning appliances - Emission test methods
UNE-EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
UNE 21306:1976 METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF OLID INSULATING MATERIALS.
UNE-EN 3030:1996 AEROSPACE SERIES. TEST METHOD FOR DRY FILM LUBRICANTS. SOLIDS CONTENT.
UNE-EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
UNE-EN 12815:2002 Residential cookers fired by solid fuel. Requirements and test methods.
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.

Professional Standard - Energy, Solid UV test method

NB/T 51019-2014 Method of compaction testing of solid backfilling materials
NB/T10820-2021
NB/T10821-2021

RO-ASRO, Solid UV test method

STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength
STAS E 12267-1984 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for the delt rminalion of the flammability in Llic case of exposure In an igniting source
STAS 12065-1982 Solid electrical insulating materials CONBINED FLEXIBLE MATERIALS Methods of test

Professional Standard - Petroleum, Solid UV test method

SY/T 6009.9-2003 Test method of samples of geochemical exploration for oil and gas Part 9:Determination of the gross amount of aromatic hydrocarbons and their ramifications Ultraviolet spectroscopy

CZ-CSN, Solid UV test method

CSN 57 0106 Cast.3-1984 Methods for testing oí frozen milk products. Determination of total solids content.
CSN 56 0240 Cast.3-1977 Testing methods for non-alcoholic drinks. Determination of solids by means of refractometer
CSN IEC 167:1993 Methods of test for the determination of the insultation resistance of solid insultating materials
CSN 57 0104 Cast.3-1984 Methods for testing of milk and liquid milk products. Determination of dry matter
CSN 57 0105 Cast.3-1978 Methods for testing of ilk and liquid mllk roducts. Determination f total solids content.
CSN 34 6460-1983 Methods of test for the determination of the d. c. insulation resistance of solid insulating materials
CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

American National Standards Institute （ANSI), Solid UV test method

ANSI/ASTM D4804:1998 Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03)
ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials

Professional Standard - Environmental Protection, Solid UV test method

HJ 1045-2019 Technical requirements and testing methods for portable ultraviolet absorption measuring instruments for flue gas from stationary pollution sources (sulfur dioxide and nitrogen oxides)

API - American Petroleum Institute, Solid UV test method

API TR 10TR5 KAZAKH-2008 Methods for Testing of Solid and Rigid Centralizers (First Edition**)

国家能源局, Solid UV test method

NB/T 10820-2021 Solid oxide fuel cell single cell test method
NB/T 10821-2021 Solid oxide fuel cell stack test method

Professional Standard - Medicine, Solid UV test method

YY/T 0808-2010 Standard test methods for in vitro pulsatile durability testing of vascular stents

IN-BIS, Solid UV test method

IS 3396-1979
IS 12402 Pt.2-1988
IS 10083-1982
IS 1448 Pt.118-1985
IS 2720 Pt.21-1977
IS 101 Pt.8/Sec.6-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 6: Volume solids
IS 9316 Pt.4-1988

IT-UNI, Solid UV test method

UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

Professional Standard - Military and Civilian Products, Solid UV test method

WJ 2396-1997 Test method for maximum range extinction ratio of solid-state pulsed laser range finder

NO-SN, Solid UV test method

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

国家质量监督检验检疫总局, Solid UV test method

SN/T 4577-2016 Cosmetic skin irritation testing method for in vitro testing of reconstructed human epidermal model

IX-SA, Solid UV test method

AS 1141.34:1997

SE-SIS, Solid UV test method

SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Solid UV test method

ASHRAE 185.2-2014 Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces

GOSTR, Solid UV test method

GOST R 58360-2019 Plate anchors for fixing of external thermal insulation composite systems with rendering. Test methods
GOST 29027-1991 Moisture meters for solid and dry substances. Specifications and testing methods

Malaysia Standards, Solid UV test method

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

AASHTO - American Association of State Highway and Transportation Officials, Solid UV test method

T229-1985 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (R 1993)
T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems
T 103-2008 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
T 103-2007 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
T 103-1991 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing

PT-IPQ, Solid UV test method

NP 2874-1985

Japanese Industrial Standards Committee (JISC), Solid UV test method

JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS K 5600-7-8:1999 Testing methods for paints -- Part 7: Long-period performance of film -- Section 8: Accelerated weathering (Exposure to fluorescent UV lamps)
JIS C 8841-3:2011 Small solid oxide fuel cell power systems -- Part 3: Performance testing methods and environment testing methods
JIS R 1761:2016 Testing method for gas permeability of porous ceramics using solid oxide fuel cell

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Solid UV test method

PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)
PREN 3030-1992 Aerospace Series Test Method for Dry Film Lubricants Solids Content (Edition 1)

ES-AENOR, Solid UV test method

AT-ON, Solid UV test method

ONR CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry (CEN/TS 17405:2020)