ZH
RU
ES

Nickel self-corrosion potential

Nickel self-corrosion potential, Total:396 items.

In the international standard classification, Nickel self-corrosion potential involves: Surface treatment and coating, Corrosion of metals, Iron and steel products, Non-ferrous metals, Materials for aerospace construction, Construction materials, Analytical chemistry, Fertilizers, Medical equipment, Welding, brazing and soldering, Products of non-ferrous metals.


AENOR, Nickel self-corrosion potential

  • UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
  • UNE 57101:2006 Paper and board. Determination of potential of corrosion.
  • UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
  • UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
  • UNE 83952:2008 Concrete durability. Water for mixing and aggresives waters. Determination of the pH. Potentiometric method.
  • UNE 112015:1994 BIOLOGICAL CORROSION. EXPERIMENTAL METHOD FOR PIT POTENTIAL DETERMINATION IN STATINLESS STEEL, USING SULFATE REDUCING BACTERIA CULTURES BY MEANS OF THE POTENTIODYNAMIC ANODIC POLARIZATION TECHNIQUE.
  • UNE-EN 480-14:2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test

未注明发布机构, Nickel self-corrosion potential

  • DIN EN 12540:2000 Corrosion protection of metals – Electroplated nickel plating and nickel-chromium plating, copper-nickel plating and copper-nickel-chromium plating
  • SAE AMS5596M-2017 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.2(Cb + Ta) - 0.90Ti - 0.60Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5662N-2016 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • SAE AMS5662P-2022 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • ISO 10446:1990/Amd 1:1991 Welding - All-weld metal test assembly for the classification of corrosion-resisting chromium and chromium-nickel steel covered arc welding electrodes
  • SAE AMS5589G-2019 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775°F (968°C), Solution Heat Treated
  • SAE AMS5598F-2019 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 72Ni 15.5Cr 0.95(Cb+Ta) 2.5Ti 0.70Al 7.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable

American Society for Testing and Materials (ASTM), Nickel self-corrosion potential

  • ASTM B651-83(2001) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
  • ASTM B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
  • ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • ASTM B651-83(2015) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • ASTM B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
  • ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
  • ASTM G69-97(2003) Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
  • ASTM G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
  • ASTM G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
  • ASTM G192-08(2020)e1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
  • ASTM B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • ASTM C876-15 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
  • ASTM C876-22b Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
  • ASTM G61-86(2009) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • ASTM A604/A604M-07(2017) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM G61-86(2003)e1 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • ASTM A604/A604M-07(2022) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM A604-93(1998) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM A604/A604M-07(2012) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM G61-86(2003) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • ASTM A604/A604M-07 Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM A604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM F2129-17b Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-19 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-17a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-15 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-19a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-17 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM G61-86(1998) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • ASTM G61-86(2014) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • ASTM G61-86(2018) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • ASTM F2129-01 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-04 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-06 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
  • ASTM F2129-03 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

European Committee for Standardization (CEN), Nickel self-corrosion potential

  • EN 12540:2000 Corrosion Protection of Metals - Electrodeposited Coatings of Nickel, Nickel Plus Chromium, Copper Plus Nickel and Copper Plus Nickel Plus Chromium
  • EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
  • CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
  • EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements

Korean Agency for Technology and Standards (KATS), Nickel self-corrosion potential

  • KS D 0270-2007 Test methods for critical crevice temperature and/of stainless steels
  • KS D 0280-2005 Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys
  • KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • KS F 2712-2018 Standard test method for corrosion potentials of uncoated reinforcing steel in concrete
  • KS D 0280-2020 Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys
  • KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • KS P ISO 16429-2010(2016) Implants for surgery－Measurements of open-circuit potential to assess corrosion behaviour of etallic implantable materials and medical devices over extended time periods
  • KS P ISO 16429:2010 Implants for surgery－Measurements of open-circuit potential to assess corrosion behaviour of etallic implantable materials and medical devices over extended time periods
  • KS P ISO 16429:2021 Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods

British Standards Institution (BSI), Nickel self-corrosion potential

  • BS EN 12540:2000 Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
  • BS EN ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
  • BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
  • BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
  • BS ISO 15158:2014 Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
  • BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • BS ISO 18089:2015 Corrosion of metals and alloys. Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
  • 22/30432417 DC BS ISO 4631. Corrosion of Metals and Alloys. Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions

Japanese Industrial Standards Committee (JISC), Nickel self-corrosion potential

  • JIS G 0577:1981 Method of pitting potential measurement for stainless steels
  • JIS G 0592:2002 Method of determining the repassivation potential for crevice corrosion of stainless steels
  • JIS Z 3320:2012 Flux cored wires for gas shielded and self-shielded metal arc welding of atmospheric corrosion resisting steel

Society of Automotive Engineers (SAE), Nickel self-corrosion potential

  • SAE AMS5660B-1966 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660A-1960 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966A-2007 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966C-2019 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966B-2013 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni 20Cr 20Co 5.9Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5832F-2006 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5544J-2008 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed UNS N07001
  • SAE AMS5661B-1972 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 5.8Mo - 2.9Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5669A-2008 Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660D-1970 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.5Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5661-1964 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 5.8Mo - 2.9Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660E-1971 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.7Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660C-1967 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5661A-1966 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 5.8Mo - 2.9Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5832J-2021 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966A-2003 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted UNS N07263
  • SAE AMS5832-1966 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5586-1964 ALLOY TUBING, WELDED, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 2.9Ti - 1.4Al Annealed Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5586A-1970 ALLOY TUBING, WELDED, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 2.9Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5832A-1970 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5586G-2007 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed UNS N07001
  • SAE AMS5873E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La Consumable Electrode Remelted, Solution Heat Treated UNS N06635
  • SAE AMS5873D-2002 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 65Ni 15.8Cr 15.2Mo 0.30Al 0.05La Consumable Electrode Melted, Solution Heat Treated
  • SAE AMS5889B-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni 22Cr 12.5Co 9.0Mo 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5889B-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5889C-2015 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5586F-2001 Nickel Alloy, Corrosion and Heat Resistant, Welded Tubing 57Ni 19.5Cr 13.5Co 4.2Mo 2.9Ti 1.4Al 0.006B 0.08Zr Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5671-1965 ALLOY FORGINGS AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5889D-2022 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5873G-2020 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Consumable Electrode Remelted, Solution Heat Treated
  • SAE AMS5709H-2008 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated UNS N
  • SAE AMS5751A-1964 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base, 18Cr - 17Co - 4Mo - 3Ti - 3Al Solution, Stabilization, and Precipitation Treated Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5887B-2006 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5887B-2001 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 54Ni 22Cr 12.5Co 9.0Mo 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5873F-2014 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La Consumable Electrode Remelted@ Solution Heat Treated (UNS N06635)
  • SAE AMS5586G-2012 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed
  • SAE AMS5671B-1969 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5671A-1968 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5964-2018 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted
  • SAE AMS5704J-2008 Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitatio
  • SAE AMS5964-2007 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted UNS N07818
  • SAE AMS5544-1964 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5598-1965 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.6Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5544A-1970 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5872D-2000 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 48Ni 20Cr 20Co 5.9Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5544B-1971 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5597E-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted, 1950°F (1066°C) Solution Heat Treated
  • SAE AMS5589E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated Composition similar to UNS N07718
  • SAE AMS5915-2014 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitati
  • SAE AMS5854B-2010 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings, 61Ni 20.5Cr 8.5Mo 3.4Cb(Nb) 1.3Ti 5.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5544H-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5544H-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 57Ni 19.5Cr 13.5Co 4.2Mo 3.0Ti 1.4Al 0.05Zr 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5596-1964 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.2(Cb + Ta) - 0.90Ti - 0.60Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5596A-1964 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.2(Cb + Ta) - 0.90Ti - 0.60Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5544L-2020 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5706L-2008 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900°F Solution Heat Treated
  • SAE AMS5872E-2012 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5664-1965 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode Melted, Solution Treated at 1950 F (1065.6 C)
  • SAE AMS5596J-1999 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, Foil, and Plate 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775°F (968°C) Solution Heat Treated
  • SAE AMS5841F-2011 Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr 36Co 25Ni 7.0Mo 0.50Cb (Nb) 2.9Ti 0.20Al 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated For Work Strengthening
  • SAE AMS5919-2003 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened, Modified Strength UNS R30159
  • SAE AMS5707L-2008 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 degrees F (996 to 1038 Degrees C) Solution, Stabi
  • SAE AMS5842D-2000 Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr 36Co 25Ni 7.0Mo 0.50Cb 2.9Ti 0.20Al 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened
  • SAE AMS5590E-2006 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE AMS5854A-2001 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings, 61Ni 20.5Cr 8.5Mo 3.4Cb 1.3Ti 5.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5589-1966 ALLOY TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Treated
  • SAE AMS5590-1966 ALLOY TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1950 F (1065.6 C) Solution Treated
  • SAE AMS5887E-2021 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Forging or Ring Stock 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5951-2010 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
  • SAE AMS5589F-2013 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted, 1775 °F (968 °C), Solution Heat Treated
  • SAE AMS5702C-2000 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
  • SAE AMS5701C-2000 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
  • SAE AMS5854A-2006 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb - 1.3Ti - 5.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5660J-2002 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr 42.5Ni 6.0Mo 2.7Ti 0.015B 34Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5590C-1993 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE AMS5597-1965 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode Melted, Solution Treated at 1950 F (1065.6 C)
  • SAE AMS5701-1971 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 F (982.2 C) Solution Heat Treated
  • SAE AMS5606-1971 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base-16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat Treated
  • SAE AMS5702-1971 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat Treated
  • SAE AMS5605-2011 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 F (982.2 C) Solution Heat Treated
  • SAE AMS5854C-2021 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5864C-2008 Steel, Corrosion-Resistant, Plate 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable UNS S13800
  • SAE AMS5898A-2001 Steel, Corrosion Resistant, Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure
  • SAE AMS5669-1965 Alloy Bars, Corrosion and Heat Resistant Nickel Base 15.5Cr 0.95(Cb+Ta) 2.5Ti 0.70Al 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5669B-2014 Alloy Bars, Corrosion and Heat Resistant, Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe, Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5662K-2000 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted 1775\mDF (968\mDC) Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5597F-2009 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 52.5Ni 19Cr 3.0Mo 5.1Cb (Nb) 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted, 1950°F (1066°C) Solution Heat Treated
  • SAE AMS5920-2003 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened and Aged, Modified Strength UNS R
  • SAE AMS5950B-2008 Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50AI - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable UNS N07719
  • SAE AMS5876D-2009 Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr 15Ni 40Co 7.0Mo 16Fe Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated and Cold Rolled
  • SAE AMS5950C-2014 Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5706N-2020 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated
  • SAE AMS5545F-2010 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated (UNS N07041)
  • SAE AMS5701D-2007 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
  • SAE MAM5914A-2003 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5ni 19cr 3.0mo 5.0cb 0.90ti 0.50al 18fe Consumable Electrode Or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated
  • SAE AMS5589D-2000 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775°F (968°C), Solution Heat Treated
  • SAE AMS5950A-2002 Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni 19Cr 3.0Mo 5.0Cb 0.90Ti 0.50Al 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5597E-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE AMS5914A-2012 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated
  • SAE AMS5597D-2000 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE MAM5706B-1998 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 995 to 1040 °C Solution Heat Treated
  • SAE AMS5915A-2019 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitation Heat Treatable
  • SAE AMS5702D-2012 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
  • SAE AMS5706K-2002 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900°F Solution Heat Treated
  • SAE AMS5706D-1970 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1825 - 1900 F (996.1 - 1037.8 C) Solution Heat Treated
  • SAE AMS5663-1965 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Solution and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5597A-1967 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1950 F (1065.6 C) Solution Treated
  • SAE AMS5664A-1967 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1950 F (1065.6 C) Solution Treated
  • SAE AMS5706C-1968 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1825 - 1900 F (996.1 - 1037.8 C) Solution Heat Treated
  • SAE AMS5663A-1966 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Solution and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5662B-1967 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat Treated
  • SAE AMS5669A-1965 (Noncurrent)Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Reaffirmed Noncurrent Sept 2001
  • SAE AMS5660M-2020 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5915B-2022 Nickel Alloy, Corrosion- and Heat-Resistant, Bars and Forgings, 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitation Heat Treatable
  • SAE AMS5950D-2020 Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable (UNS N07719)
  • SAE AMS5671G-2003 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable UNS N07750
  • SAE AMS5598E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable UNS N07750
  • SAE AMS5664E-2001 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated, Precipitation Hardenable U
  • SAE AMS5663L-2003 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution and Precipitation Heat Treated UNS N0
  • SAE AMS5660K-2008 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated UNS N09901
  • SAE AMS5843F-2011 Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr 36Co 25Ni 7.0Mo 0.50Cb (Nb) 2.9Ti 0.20Al 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted, Solution Heat Treated Work Strengthened and Aged
  • SAE AMS5887C-2009 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 54Ni 22Cr 12.5Co 9.0Mo 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5704H-2006 Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.05Zr 0.006B, Consumable Electrode or Vacuum Induction Melted, 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5864D-2013 Steel, Corrosion-Resistant, Plate, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5704A-1970 ALLOY FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1825 - 1900 F (996.1 - 1037.8 C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5701E-2015 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 ��(982 �� Solution Heat Treated (UNS N09706)
  • SAE AMS5597F-2015 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE AMS5708L-2015 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated
  • SAE AMS5545E-2006 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated
  • SAE AMS5703D-2012 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5703C-2000 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5661F-2012 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5545E-2002 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 54Ni 19Cr 11Co 9.8Mo 3.2Ti 1.5Al 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable, Precipitation Heat Treated
  • SAE AMS5662C-1972 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al - 19Fe Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat Treated
  • SAE AMS5709C-1974 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975° F (1079.4° C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5703-1971 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted, 1750 F (954.4 C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5709B-1973 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975° F (1079.4° C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5706-1964 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution Heat Treated, 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5709A-1970 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 F (1079.4 C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5706A-1965 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution Heat Treated, 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5596B-1967 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat Treated
  • SAE AMS5596C-1968 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat Treated
  • SAE AMS5841G-2022 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening
  • SAE AMS5842H-2022 Cobalt-Nickel Alloy, Corrosion- and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened
  • SAE AMS5597H-2022 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE AMS5951B-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
  • SAE AMS5702D-2007 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 Degrees F (954 Degrees C) Solution Heat Treated UNS N09706
  • SAE AMS5662M-2004 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb (Nb) 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted 1775°F (968°C) Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5842E-2006 Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni -7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened USN R30159
  • SAE AMS5960-2013 Nickel Alloy, Corrosion and Heat-Resistant Sheet, Strip, and Foil, Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W, Vacuum Induction Melted and Consumable Electrode Remelted, Solution Heat Treated
  • SAE AMS5663C-1972 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al - 19Fe Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution and Precipitation Heat Treated
  • SAE AMS5442A-2011 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni 18Cr 2.8Mo 5.5Cb(Nb) 0.70Ti 1.50Al 10Fe 9Co 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
  • SAE AMS5706M-2015 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 ��Solution Heat Treated (UNS N07001)
  • SAE AMS5671G-2013 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5663N-2016 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
  • SAE AMS5709G-2006 Nickel Alloy, Corrosion and Heat Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5664E-2006 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5709H-2013 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5596K-2012 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
  • SAE AMS5661E-1995 Nickel-Iron Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated (UNS N09901)
  • SAE AMS5660L-2015 Nickel-Iron Alloy@ Corrosion and Heat-Resistant@ Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution@ Stabilization@ and Precipitation Heat Treated (UNS N09901)
  • SAE AMS5663B-1967 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution and Precipitation Heat Treated
  • SAE AMS5709-1963 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution, Stabilization, and Precipitation Heat Treated. 1975 F (1079.4 C) Treatment Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5704-1966 ALLOY FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution, Stabilization, and Precipitation Heat Treated 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5709J-2019 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5843H-2022 Cobalt-Nickel Alloy, Corrosion- and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened, and Aged
  • SAE AMS5671H-2019 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5707B-1966 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution, Stabilization, and Precipitation Heat Treated 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum I...
  • SAE AMS5707-1963 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution, Stabilization, and Precipitation Heat Treated 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum I...
  • SAE AMS5707A-1964 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution, Stabilization, and Precipitation Heat Treated 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum I...
  • SAE AMS5590E-2000 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted 1950°F (1066°C) Solution Heat Treated
  • SAE AMS5914A-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated Composition similar to UNS N07719
  • SAE AMS5441A-2011 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni 18Cr 2.8Mo 5.5Cb(Nb) 0.70Ti 1.50Al 10Fe 9Co 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable
  • SAE AMS5919-2007 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened, Modified Strength
  • SAE AMS5707M-2015 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and P
  • SAE AMS5704K-2015 Nickel Alloy@ Corrosion and Heat Resistant@ Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 ��(996 to 1038 �� Solution@ Stabilization@ and Precipitation Heat Treated
  • SAE AMS5704J-2013 Nickel Alloy, Corrosion and Heat-Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5662M-2009 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable
  • SAE AMS5598E-2012 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable
  • SAE AMS5707C-1970 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1825 - 1900 F (996.1 - 1037.8 C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5707D-1973 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1825 - 1900° F (996.1 - 1037.8° C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5962A-2022 Nickel Alloy, Corrosion and Heat-Resistant, Round Bars and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Treated and Work Strengthened Precipitation Hardenable
  • SAE AMS5701F-2022 Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Flash Welded Rings and Forging Stock 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
  • SAE AMS5704L-2020 Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.6Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5707L-2013 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilizat...
  • SAE AMS5596N-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
  • SAE AMS5598D-2000 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 72Ni 15.5Cr 0.95(Cb+Ta) 2.5Ti 0.70Al 7.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
  • SAE AMS5707K-2007 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings and Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.05Zr 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5758H-2008 Alloy, Corrosion-Resistant, Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening
  • SAE AMS5758J-2014 Alloy, Corrosion-Resistant, Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated for Work Strengthening
  • SAE AMS5920-2007 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened and Aged, Modified Strength
  • SAE AMS5704E-1993 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, FORGINGS 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
  • SAE AMS5442B-2022 Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
  • SAE AMS5702C-1993 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 41.5Ni 16Cr 37Fe 2.9Cb 1.8Ti, Consumable Electrode or Vacuum Induction Melted, 1750°F (954°C) Solution Heat Treated

SAE - SAE International, Nickel self-corrosion potential

  • SAE AMS5660-1959 ALLOY@ CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966-1997 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 50Ni-20Cr-20Co-5.9Mo-2.2Ti-0.45Al Consumable Electrode or Vacuum Induction Melted (UNS N07263)
  • SAE AMS5669-1985 Alloy Bars@ Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb+Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5832E-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted (UNS N07718)
  • SAE AMS5832H-2015 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted (UNS N07718)
  • SAE AMS5832G-2010 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted (UNS N07718)
  • SAE AMS5889A-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5586E-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode or Vacuum Induction Melted@ Annealed (UNS N07001)
  • SAE AMS5873C-1996 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Consumable Electrode Melted@ Solution Heat Treated (UNS N06635)
  • SAE AMS5889C-2010 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5544G-1991 Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 57 Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted@ Annealed
  • SAE AMS5887D-2015 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5586H-2019 Nickel Alloy@ Corrosion and Heat-Resistant@ Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted@ Annealed (UNS N07001)
  • SAE AMS5887A-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Bars Bars@ Forgings and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5662A-1966 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • SAE AMS5662-1965 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • SAE AMS5544K-2014 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted@ Annealed (UNS N07001)
  • SAE AMS5708H-2002 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4AI Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated
  • SAE AMS5708B-1970 ALLOY BARS AND FORGINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19.Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 F (1079.4 C) Solution Heat Treated
  • SAE AMS5708A-1970 ALLOY BARS AND FORGINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 F (1079.4 C) Solution Heat Treated
  • SAE AMS5951A-2017 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted@ Solution Heat Treated Precipitation Heat Treatable (UNS N07208)
  • SAE AMS5898-1995 Steel@ Corrosion Resistant@ Bars@ Wire@ and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure
  • SAE AMS5898B-2018 Steel@ Corrosion Resistant@ Bars@ Wire@ and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure
  • SAE AMS5950-1996 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07719)
  • SAE AMS5914-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled@ Solution Heat Treated
  • SAE MAM5914-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled@ Solution Heat Treated
  • SAE AMS5598C-1993 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate@ 72Ni - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)
  • SAE AMS5854C-2015 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Wire@ Forgings@ and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated (UNS N07716)
  • SAE AMS5590G-2018 Nickel Alloy@ Corrosion and Heat-Resistant@ Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated (UNS N07718)
  • SAE AMS5545G-2018 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 54Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.5Al – 0.006B Vacuum Induction and Consumable Electrode Melted@ Solution Heat Treatable Precipitation Heat Treated (UNS N07041)
  • SAE AMS5842C-1994 Cobalt-Nickel Alloy@ Corrosion and Heat Resistant@ Bars 19Cr - 36Co - 25Ni -7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened (UNS R30159)
  • SAE AMS5605C-1992 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 Degrees F (982 Degrees C) Solution Heat Treated
  • SAE AMS5914B-2019 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled@ Solution Heat Treated (UNS N07719)
  • SAE AMS5708K-2008 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Wire Forgings@ and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated (UNS N07001)
  • SAE AMS5589C-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated (UNS N07718)
  • SAE AMS5660H-1995 Nickel-Iron Alloy@ Corrosion and Heat Resistant@ Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode or Vacuum Induction Melted Solution@ Stabilization@ and Precipitation Heat Treated (UNS N09901)
  • SAE AMS5590D-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated (UNS N07718)
  • SAE AMS5708C-1973 ALLOY BARS AND FORGINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 Degrees F (1079.4 Degrees C) Solution Heat Treated
  • SAE AMS5706B-1966 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution Heat Treated@ 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5702E-2018 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated (UNS N09706)
  • SAE AMS5960A-2019 Nickel Alloy@ Corrosion and Heat Resistant Sheet@ Strip@ and Foil Ni - 18Cr - 2.8Mo - 5.5Cb (Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Vacuum Induction Melted and Consumable Electrode Remelted Solution Heat Treated (UNS N07818)
  • SAE AMS5842G-2016 Cobalt-Nickel Alloy@ Corrosion and Heat-Resistant@ Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened (UNS R30159)
  • SAE AMS5842F-2011 Cobalt-Nickel Alloy@ Corrosion and Heat-Resistant@ Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened (UNS R30159)
  • SAE AMS5597G-2016 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated (UNS N07718)
  • SAE AMS5706J-1996 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F Solution Heat Treated (UNS N07001)
  • SAE AMS5663K-2002 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated (UNS N07718)
  • SAE AMS5708G-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 Degrees F (1079 Degrees C) Solution Heat Treated (UNS N07001)
  • SAE MAM5706B-1989 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 995 to 1040 Degrees C Solution Heat Treated (UNS N07001)
  • SAE MAM5598B-2000 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)
  • SAE MAM5598A-1993 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)
  • SAE AMS5545D-1996 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted@ Solution Heat Treated Precipitation Heat Treatable (UNS N07041)
  • SAE AMS5590F-2010 Nickel Alloy@ Corrosion and Heat-Resistant@ Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degree F (1066 Degrees C) Solution Heat Treated (UNS N07718)
  • SAE MAM5598C-2003 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 72Ni - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated@ Precipitation Hardenable (UNS N07750)
  • SAE AMS5841G-2016 Cobalt-Nickel Alloy@ Corrosion and Heat-Resistant@ Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening (UNS R30159)
  • SAE AMS5843G-2016 Cobalt-Nickel Alloy@ Corrosion and Heat-Resistant@ Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated@ Work Strengthened@ and Aged (UNS R30159)
  • SAE AMS5707N-2017 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution@ Stabilization@ and P
  • SAE AMS5707G-1989 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825? - 1900?F (996? - 1038?C) Solution@ Stabilization@ and Precipitation Heat T
  • SAE AMS5708M-2019 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Wire@ Forgings@ and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated (UNS N07001)
  • SAE AMS5704F-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F (996 to 1038 Degrees C) Solution@ Stabilization@ and Precipitation
  • SAE AMS5662H-1994 NICKEL ALLOY@ CORROSION AND HEAT RESISTANT@ BARS@ FORGINGS@ AND RINGS 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated@ Precipitation Hardenable (UNS N07718)
  • SAE AMS5664F-2017 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated@ Precipitation Hardenable (UNS N07718
  • SAE AMS5597D-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated (UNS N07718)
  • SAE AMS5709F-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 Degrees F (1079 Degrees C) Solution@ Stabilization@ and Precipitation Heat
  • SAE AMS5596L-2016 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated (UNS N07718)
  • SAE AMS5596K-2007 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated (UNS N07718)
  • SAE AMS5703E-2018 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution@ Stabilization@ and Precipitation Heat Treated (UNS N09706)
  • SAE AMS5663J-1997 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution and Precipitation Heat Treated (UNS N07718
  • SAE AMS5441B-2016 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated@ Precipitation-Hardenab
  • SAE AMS5662K-1998 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated@ Precipitation Hardenable (UN
  • SAE AMS5662B-2004 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degree F (968 Degree C) Solution Heat Treated@ Precipitation-Hardenable
  • SAE AMS5662G-1993 NICKEL ALLOY@ CORROSION AND HEAT RESISTANT@ BARS@ FORGINGS@ AND RINGS 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated@ Precipitation Hardenable (UNS N0771
  • SAE AMS5662E-2004 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degree F (968 Degree C) Solution Heat Treated@ Precipitation-Hardenable
  • SAE AMS5664D-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated@ Precipitation Hardenable (U
  • SAE AMS5662J-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated@ Precipitation Hardenable (UN
  • SAE AMS5596H-1996 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ Foil@ and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated (UNS N07718)
  • SAE AMS5664B-2001 Nickel Alloy@ Corrosion and Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated@ Precipitation Hardenable (U
  • SAE AMS5663H-1996 Nickel Alloy@ Corrosion & Heat Resistant@ Bars@ Forgings@ and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 19Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution and Precipitation Heat Treated (UNS N07718)
  • SAE AMS5661F-2005 Nickel-Iron Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution@ Stabilization@ and Precipitation Heat Treated (Composition similar to UNS
  • SAE AMS5661G-2018 Nickel-Iron Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution@ Stabilization@ and Precipitation Heat Treated (Composition similar to UNS
  • SAE AMS5442B-2017 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated (UNS
  • SAE AMS5920B-2018 Cobalt-Nickel Alloy@ Corrosion and Heat-Resistant@ Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated@ Work Strengthened and Aged@ Modified Strength (
  • SAE AMS5919B-2018 Cobalt-Nickel Alloy@ Corrosion and Heat-Resistant@ Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened@ Modified Strength (UNS R3

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nickel self-corrosion potential

  • GB/T 17899-2023 Corrosion of metals and alloys - Potentiodynamic measurement of pitting potential of stainless steel in sodium chloride solution
  • GB/T 32550-2016 Corrosion of metals and alloys.Determination of the critical pitting temperature under potentiostatic control
  • GB/T 37619-2019(英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
  • GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • GB/T 29088-2012 Corrosion of metals and alloys.Electrochemical potentiokinetic reactivation measurement using the double loop method
  • GB/Z 41259-2022 Method for determination of quaternary ammonium compounds in preservative-treated wood and wood preservatives by potentiometric titrator

GM North America, Nickel self-corrosion potential

  • GM GM9040P-1995 EC Test Electrolytic Corrosion Test for Evaluating the Corrosion Protection Characteristics of Copper - Nickel - Chromium Electrodeposits Replaced by ASTM B 627

Association Francaise de Normalisation, Nickel self-corrosion potential

  • NF A05-119*NF EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
  • NF A05-207*NF ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
  • NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
  • NF A05-172*NF ISO 18089:2016 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control

Danish Standards Foundation, Nickel self-corrosion potential

  • DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
  • DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
  • DS/EN 480-14:2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test

German Institute for Standardization, Nickel self-corrosion potential

  • DIN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005);English version of DIN EN ISO 17864:2008-07
  • DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
  • DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
  • DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07
  • DIN EN ISO 12732:2008-07 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008

国家市场监督管理总局、中国国家标准化管理委员会, Nickel self-corrosion potential

  • GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes

International Organization for Standardization (ISO), Nickel self-corrosion potential

  • ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
  • ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
  • ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • ISO 17475:2005/cor 1:2006 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1
  • ISO/FDIS 4631:2023 Corrosion of Metals and Alloys — Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
  • ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
  • ISO 18089:2015 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
  • ISO 16429:2004 Implants for surgery - Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods

KR-KS, Nickel self-corrosion potential

  • KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
  • KS P ISO 16429-2021 Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods

Lithuanian Standards Office , Nickel self-corrosion potential

  • LST EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
  • LST EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
  • LST EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)
  • LST EN 480-14-2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test

工业和信息化部, Nickel self-corrosion potential

  • HG/T 5938-2021 Determination of chloride ion content in humic acid fertilizers by automatic potentiometric titration

Professional Standard - Medicine, Nickel self-corrosion potential

  • YY/T 0695-2008 Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices

ES-UNE, Nickel self-corrosion potential

  • SAE AMS5590G-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • UNE-EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) (Endorsed by AENOR in June of 2008.)

BE-NBN, Nickel self-corrosion potential

  • NBN-EN 3289-1994 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2 - Dimensions and loads

国家食品药品监督管理局, Nickel self-corrosion potential

  • YY/T 1552-2017 Open circuit potential measurement method for evaluating long-term corrosion behavior of metallic implant materials and medical devices in surgical implants

AASHTO - American Association of State Highway and Transportation Officials, Nickel self-corrosion potential

  • T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)

  Nickel self-corrosion potential, Measurement of self-corrosion potential, self-corrosion potential of iron, Measuring method of self-corrosion potential, Self-corrosion potential test, Nickel Corrosion Potential, Self-corrosion potential of various metals, self-corrosion potential of metal, Nickel self-corrosion potential, Gold self-corrosion potential.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved