Offset Calibration Offset

Offset Calibration Offset, Total:500 items.

In the international standard classification, Offset Calibration Offset involves: Cutting tools, Linear and angular measurements, Non-metalliferous minerals, Screw threads, Metalliferous minerals, Footwear, Technical drawings, Optical equipment, Textile machinery, Gears, On-board equipment and instruments, Chipless working equipment, Shipbuilding and marine structures in general, Rubber and plastics products, Construction technology, Iron and steel products, Manufacturing forming processes, Road engineering, Characteristics and design of machines, apparatus, equipment, Semiconductor devices, Wood-based panels, Fasteners, Shafts and couplings, Non-ferrous metals, Quality, Power stations in general, Wood, sawlogs and sawn timber, Rotating machinery, Tyres, Sewing machines and other equipment for the clothing industry, Wood technology processes, Road vehicle systems, Ceramics, Telecommunication systems, Construction industry, Products of non-ferrous metals, Products of the textile industry, Hospital equipment, Furniture, Welding, brazing and soldering, Ferrous metals, Vocabularies, Energy and heat transfer engineering in general, Testing of metals, Analytical chemistry, Mining and quarrying, Paints and varnishes, Resistors, Bottles. Pots. Jars, Mechanical testing, Horology, Coals, Occupational safety. Industrial hygiene, Raw materials for rubber and plastics, Fibre optic communications, Pipeline components and pipelines.

CU-NC, Offset Calibration Offset

NC 02-06-1968 Representation of linear and angular desviations
NC 01-05-1967 Deviation of dimensions without tolerance indication.
NC 01-02-1967 Selection of deviations ISA from IT 13 to IT 16
NC 01-01-1967 Selection of deviations and fits of ISA from IT 5 to IT 12
NC 01-03-1968 Selection of deviations and fits of ISA from 500 to 3 150 mm

International Organization for Standardization (ISO), Offset Calibration Offset

ISO 13942:2000 Bonded abrasive products - Limit deviations and run-out tolerances
ISO 3086:1998 Iron ores - Experimental methods for checking the bias of sampling
ISO 5864:1978 ISO inch screw threads; Allowances and tolerances
ISO 1328-2:1997 Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
ISO 2768:1973 Permissible machining variations in dimensions without tolerance indication
ISO 13942:2019 Bonded abrasive products — Limit deviations and run-out tolerances
ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions
ISO 3443-4:1986 Tolerances for building; Part 4 : Method for predicting deviations of assemblies and for allocation of tolerances
ISO 5193:1981 Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
ISO/R 286:1962 ISO system of limits and fits; Part I : General, tolerances and deviations
ISO 4464:1980 Tolerances for building; Relationship between the different types of deviations and tolerances used for specification
ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
ISO 7773:1983 Magnesium alloys; Round bars and tubes; Dimensional tolerances
ISO 3086:1986 Iron ores; Experimental methods for checking the bias of sampling
ISO 9497:1993 Flourspar; experimental methodes for evaluation of quality variation
ISO 10226:1991 Aluminium ores; experimental methods for checking the bias of sampling
ISO 1035-4:1982 Hot-rolled steel bars; Part 4 : Tolerances
ISO 965-3:1998 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
ISO 965-3:2021 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads
ISO 965-3:1973 Title missing - Legacy paper document
ISO 965-3:1980 ISO general purpose metric screw threads; Tolerances; Part 3 : Deviations for constructional threads

IT-UNI, Offset Calibration Offset

UNI 468-1970 Round steel rod with h11 deviation. Dimensions and deviations
UNI 469-1970 Precision round steel rod with h9 deviation. Dimensions and deviations
UNI 472-1970 Square wire steel pole with h11 deviation. Dimensions and deviations
UNI 470-1970 Hexagonal wire steel rod with h11 deviation. Dimensions and deviations
UNI 471-1970 Hexagonal wire steel rod with h10 deviation. Dimensions and deviations
UNI 7226-P3-1973 Technical drawings. Shape and position deviation. Description of contour shape deviations
UNI 7451-1975 Can forge iron sand or molding sand castings. Deviation without deviation statement
UNI 6389-1968 ISO system for deviations and connections. Deviation values for fine mechanics and clockwork
UNI 3812-1956 Rolled aluminum. Size deviation
UNI 3976-1961 Technical drawings. Deviation sign
UNI 7490-1975 Grinding tape. Dimensions and deviations
UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method
UNI 1088-1098-1940 ISA system deviation for machining. Deviations and connections. Definitions and Basic PrinciplesT
UNI 4597-1960 Machining ISO deviation system. Lathe rolling bearing installation deviation (except spindle)
UNI 7218-1973 ISO system of limits and fits. Selection of tolerance zones for recommended fits.
UNI 4201-1959 Zinc plate. Dimensions, deviations and weight
UNI 4202-1959 Zinc belt. Dimensions, deviations and weight
UNI 1751-1752-1941 Elastic gasket. Dimensions and deviations
UNI EN 40-P2-1977 Lighting Pah． Dimensions and deviations
UNI ISO 2903:1978 ISO trapezoidal metric thread. deviation
UNI 6324-1973 Hot pressed steel parts. Size deviation
UNI 6777-1971 Glass technical items. Design standards and deviations
UNI F.A.47-1971 ISO system for deviations and connections. Precision machinery offset value
UNI 4399-1960 ISO deviation system for machining
UNSIDER 34-1960 Quality inspection. natural deviation representation
UNI 4924-1962 Circular conveyor belt. Length and deviation
UNI 6450-1969 Rolled lead. Dimensions, deviations and quality
UNI 7063-1978 Semi-processed steel. Dimensions and deviations
UNI 6390-1968 ISO system for deviations and connections. Deviation value for application sizes 500-3150mm1), replacing UNI 4225P and UNI 4226P
UNI 3813-1956 Rolled aluminum alloy profiles. Size deviation
UNI 4866-1961 Wooden particle panels. Dimensions and deviations
UNI 6100-1967 Pipe metal flange. deviations and flags
UNI 5307-1963 Processed parts with material removed. Offset value without deviation specification
UNI 6346-1968 Bronze castings and brass castings. Offset value without deviation specification
UNI 6388-1968 ISO system for deviations and connections. Dimensions for general use have deviations from 1-500mm, replacing uni 2904 and uni 2905'
UNI 6141-1968 Bed for hospital rooms and communities. Dimensions and tolerances.
UNI 5679-1973 Hot rolled steel finished products. Ipn beams. Dimensions and tolerances.
UNI 3885-1957 Aircraft series engine characteristic deviations
UNI 3976-1989 Technical drawings. Deviation symbols for lines and angles
UNI 4518-1960 Railway carriage biaxial frame. structural deviation
UNI 4630-1970 Hot rolled steel buckling plate. Dimensions and deviations
UNI ISO 4875-P2:1978 Metal band saw blade. Nominal dimensions and deviations
UNI 5680-1973 Hot-rolled steel finished product UPN2) beam. Dimensions and deviations
UNI 3141-1966 Regulations for railway lines. Types, sizes and deviations
UNI 3879-1957 Aluminum and aluminum alloy extruded profiles. Grading. deviation
UNI 2088-1956 Wood fiber compression panels. Thickness and deviation
UNI 2089-1956 Wood fiber soft panel. Thickness and deviation
UNI 8104-P1-1980 Construction industry. Size deviation. Definition and Classification1)
UNI ISO 8015:1989 Technical drawings. Basic principles of deviation determination
UNI 5062 P-1962 Wood fiber panel testing. Types and deviations
UNI 5415-1964 Elastic materials: finished products, stamped parts, dimensional deviations
UNI 7068-1972 Non-alloy gray iron sand casting castings. Offset value without deviation specification
UNI 7366-P3-1974 ISO system for deviations and connections. Inspection of smooth parts, calipers and joints assuming production deviation and wear, supersedes UNI 1149

Danish Standards Foundation, Offset Calibration Offset

DS 687:1990 Kunuckle thread. Deviations and tolerances
DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
DS/EN ISO 6284:2000 Construction drawings - Indication of limit deviations
DS/EN 10140:2009 Cold rolled narrow steel strip – Tolerances on dimensions and shape
DS/ISO 965-3/Corr. 1:2009 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
DS/ISO 965-3:1999 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
DS/ISO 965/3:1981 ISO general purpose. Metric screw threads. Tolerances. Part 3: Deviations for constructional threads

German Institute for Standardization, Offset Calibration Offset

DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 513-3:2020-12 Metric buttress threads - Part 3: Deviations and tolerances
DIN 405-2:1997 General purpose knuckle threads - Part 2: Deviations and tolerances
DIN 513-3:1985 Metric buttress threads; deviations and tolerances
DIN 3962-3:1978 Tolerances for Cylindrical Gear Teeth; Tolerances for Pitch-span Deviations
DIN 3963:1978 Tolerances for Cylindrical Gear Teeth; Tolerances for Working Deviations
DIN 9711-3:1963 Magnesium Extruded Sections; Permissible Variations
DIN 513-3:2020 Metric buttress threads - Part 3: Deviations and tolerances
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)
DIN 3964:1980 Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears
DIN 3962-2:1978 Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations
DIN ISO 13942:2020-11 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)
DIN 4760:1982 Form deviations; Concepts; Classification system
DIN EN 336:2013-12 Structural timber - Sizes, permitted deviations; German version EN 336:2013
DIN 4760:1982-06 Form deviations; Concepts; Classification system
DIN 3973-2:2017 Tolerances of worm wheel hobs - Part 2: Tolerances for deviation of individual parameters
DIN 3973-2:2017-09 Tolerances of worm wheel hobs - Part 2: Tolerances for deviation of individual parameters
DIN 3962-1:1978 Tolerances for Cylindrical Gear Teeth; Tolerances for Diviations of Individual Parameters
DIN 405-2:1997-11 General purpose knuckle threads - Part 2: Deviations and tolerances
DIN 68101:2012 Fundamental deviations and tolerance zones for wood working and wood processing
DIN 3964:1980-11 Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears
DIN 68101:1984 Fundamental deviations and tolerance zones for wood working and wood processing
DIN 68101:2012-02 Fundamental deviations and tolerance zones for wood working and wood processing
DIN ISO 13942:2020 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)
DIN 178:1969 Bright Square Steel; Dimensions, Permissible Variations, Weights
DIN 8249-2:1977-02 Hands for watches; upper and lower deviations for holes and shafts
DIN ISO 965-3:1999-11 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998) / Note: To be replaced by DIN ISO 965-3 (2021-01).
DIN 3965-4:1986 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations
DIN ISO 6284:1997-09 Construction drawings - Indication of limit deviations (ISO 6284:1996)
DIN 8249-2:1977 Hands for watches; upper and lower deviations for holes and shafts
DIN 6880:1975 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN ISO 965-3:2021-01 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as replacement for DIN ISO 965-3 (1999-11).

未注明发布机构, Offset Calibration Offset

DIN 513-3 E:2019-07 Metric buttress threads - Part 3: Deviations and tolerances
DIN 513-3 Metric buttress threads - Part 3: Deviations and tolerances
DIN 7155-1 ISO-fits for the shaft basis system; tolerance zones, deviations
DIN ISO 13942 E:2019-12 Bonded abrasive products - Limit deviations and run-out tolerances
BS EN ISO 6284:1999(2000) Construction drawings — Indication of limit deviations
DIN EN 336:2003 Timber for load-bearing purposes Dimensions, permissible deviations
DIN 4760:1960 Form deviations; Concepts; Classification system
DIN 3973-2 E:2017-02 Tolerances of worm wheel hobs - Part 2: Tolerances for deviation of individual parameters
DIN 405-2 General purpose knuckle threads - Part 2: Deviations and tolerances
BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS EN 390:1995(1999) Glued laminated timber — Sizes — Permissible deviations
DIN EN 390:1995 Glued laminated timber — Sizes, Permissible deviations
DIN 6880 E:2006-06 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN EN 336 E:2012-04 Structural timber - Sizes, permitted deviations

Korean Agency for Technology and Standards (KATS), Offset Calibration Offset

KS B 0420-2015 Deviations for Center Distances
KS B 0420-2015(2020) Deviations for Center Distances
KS B 0420-1985 Deviations for Center Distances
KS B 0420-1971 Deviations for Center Distances
KS B 0428-2020 Permissible deviations in demensions without tolerance indication for gas cut steel plates
KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS B 0507-1975(2011) Roughness Comparison Specimens
KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS B 5211-2001 Tolerances, allowable deviations and permissible wears of limit gauges
KS B 0428-2015 Permissible Deviation in Dimensions without Tolerance Indication for Gas Cut Steel Plates
KS B 5211-1986 Tolerances, allowable deviations and permissible wears of limit gauges
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS B 0425-2001 Definitions and designations of geometrical deviations
KS B 0425-2016 Definitions and designations of geometrical deviations
KS B 0425-1986 Definitions and designations of geometrical deviations
KS B 5211-2001(2016) Tolerances, allowable deviations and permissible wears of limit gauges
KS B 5211-2001(2021) Tolerances, allowable deviations and permissible wears of limit gauges
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS B 0418-2014(2019) Permissible deviations in dimensions without tolerance indication for steel castings
KS C IEC PAS 62161-2002(2012) Steady state temperature humidity bias life test
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS B 0416-1995 Premissible deviations in dimensions without tolerance indication for shearing of metal plates
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3260-1969(2001) INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS C IEC PAS 62161:2002 Steady state temperature humidity bias life test
KS B 0416-2014(2019) Permissible deviations in dimensions without tolerance indication for shearing of metal plates
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)
KS E ISO 3086:2010 Iron ores-Experimental methods for checking the bias of sampling
KS D 3502-2016 Dimensions, mass and permissible variations of hot rolled steel sections
KS D 3502-1986 Dimensions, mass and permissible variations of hot rolled steel sections
KS B ISO 286-1:2009 ISO system of limits and fits-Part 1:Bases of tolerances, deviations and fits
KS B ISO 286-1:2016 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B 0417-2014(2019) Permissible deviations in dimensions without tolerance indication for metallic sintered products
KS B ISO 4291:2004 Methods for the assessment of departure from roundness-Measurement of variations in radius
KS C 6986-2004 Evaluation method of geometrical deviation onfibre optic connector interfaces
KS E ISO 10226:2003 Aluminium ores-Experimental methods for checking the bias of sampling
KS B ISO 4291:2014 Methods for the assessement of depature from roundness — Measurement of variations in radius

Professional Standard - Agriculture, Offset Calibration Offset

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
JB 2854-1980 Machining allowance, dimension deviation and weight deviation of iron castings

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Offset Calibration Offset

GB/T 32554-2016 Fluorspar.Experimental methods for checking the bias of sampling and sample preparation
GB/T 10322.4-2000 Iron ores-Experimental methods for checking the bias of sampling
GB/T 10322.4-2014 Iron ores.Experimental methods for checking the bias of sampling
GB/T 7242-2010 Centering error of lenses
GB/T 2516-2023 Ordinary thread limit deviation
GB/T 2516-2003 General purpose metric screw threads--Limit deviations
GB/T 15055-1994 Permissible stamping varitions in dimensions without tolerance indication
GB/T 15055-2007 Permissible stamping variations in dimensions without tolerance indication
GB/T 2831-2009 Surface form deviation of optical elements
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 12325-2008 Power quality.Deviation of supply voltage
GB/T 2837-1998 Measuring method for size and deviation of vitrified clay pipe
GB/T 24232-2009 Manganese and chromium ores.Experimental methods for checking the bias of sampling and sample preparation
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
GB/T 222-2006 Permissible tolerances for chemical composition of steel products
GB/T 15945-2008 Power quality.Frequency deviation for power system
GB/T 12325-2003 Power quality-Admissible deviation of supply voltage
GB/T 25946-2010 Aluminium ores.Experimental methods for checking the bias of sampling
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
GB/T 14846-2014 Tolerances on dimensions and form of aluminium and aluminium alloy extruded profiles
GB/T 14846-2008 Aluminium and aluminium alloy extruded profiles.Tolerances on dimension and form
GB/T 14846-1993 Wrought aluminium and aluminium alloy extruded profiles.Toerances on dimensions and shape
GB/T 8452-2008 Test method for verticality of glass bottles

CZ-CSN, Offset Calibration Offset

CSN 795790-2001 Footwear - Acceptable deviations
CSN 01 4421-1982 Measuring of deviations of straightness
CSN 01 4424-1987 Measuring of deviations of cylindrieity
CSN 01 4422-1982 Measuring of deviations of flatness.
CSN 23 0604-1963 Spanner openings. Limit deviations
CSN 01 4423-1987 Methods of measurement of roundness deviations
CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
CSN 01 4431-1987 Methods of mcasuremcnl of parallclism devialoris
CSN 01 4405-1965 Form and position deviations. Numerical values
CSN 42 0008-1987 Form and position deviations of metallurgic products
CSN 01 4425-1987 Form deviations of the longitudinal section profile-measuring
CSN 49 1111 Z3-1997 Coniferous sawn tiraber Dimensions. Permissible deviations
CSN 49 1111-1989 Coniferous sawn timber Dimensions. Permissible deviations
CSN 73 2611-1978 Dimenaion and shape deviations of stsel structures
CSN 73 2611-1966 Limit deviations for dimensions of struetural steelwork
CSN 01 4480-1989 Size limit deviations of cut metal sheets
CSN 01 4420-1982 Form and position deviations. Measuring. General
CSN 01 4481-1955 Oxygen cutting plate gap specification deviation
CSN 01 4347-1964 Matching of threads Limit deviations of Whitworth bolts threads
CSN 42 0278-1953 Forgings made of tool steels. Machining allowances and tolerances
CSN 05 0235-1977 Limit deviations of weldments and their machining additions
CSN 01 4203 Za-1990 Czech National Standard 01 4203 *Single system of tolerances and RVHP. Tolerance columns, deviations and basic tolerances for specifications over 3150 mm
CSN 01 4201-1989 Unified system of limits and fits CMEA. General regulations, tole-rances, fundamental deviations
CSN 73 0420-2-2002 Accuracy of setting out of constructions - Part 2: Setting out deviations
CSN 01 4332-1962 Matching of threads. Limit deviationa of matric threads of bolts Sn
CSN 01 4346-1964 Matching of threads. Limit deviations of Whitworth nut threads

SAE - SAE International, Offset Calibration Offset

SAE ARP794-1968 Airstream Deviation Instrument (ADI)
SAE J2817-2019 Definition and Measurement of Torque Biasing Differentials

Society of Automotive Engineers (SAE), Offset Calibration Offset

SAE ARP794-1991 AIRSTREAM DEVIATION INSTRUMENT (ADI)
SAE ARP794A-2008 Airstream Deviation Instrument (ADI)
SAE ARP794A-2001 Airstream Deviation Instrument (ADI)
SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial
SAE J2817-2008 Definition and Measurement of Torque Biasing Differentials

YU-JUS, Offset Calibration Offset

JUS K.F1.006-1990 Bonded abrasive products. Limit deviations and run-out tolerances
JUS B.G8.057-1982 MethcxJs of analysis of iron ore. Experimental methodsfor checking the bias ofsampling
JUS M.B0.232-1987 Tolerances of metric screw thread with triangular ISO-profile. Numericai values of fundamenta! devia-tions
JUS D.E1.013-1988 Fundamenta! deviation and tolerance zones for vvorking and wood processing
JUS M.A1.435-1994 Tolerances in mechanical engineering - Tolerances for sizes without tolerance indication - Deviations for sizes of sizes of wrought copper and copper alloys forgings

Professional Standard - Aerospace, Offset Calibration Offset

QJ 771-1983 Limit deviation of dimensions without tolerance

Taiwan Provincial Standard of the People's Republic of China, Offset Calibration Offset

CNS 518-1955 Tolerance of Whitworth Threads (Fine Fit)
CNS 4-1-1987 Limits and Fits (General, Tolerance and Deviations)
CNS 4.1-1987 Limits and Fits (General, Tolerance and Deviations)
CNS 13079-1992 Types of Dimensional and Toleramces for Building
CNS 520-1955 Tolerance of Whitworth Threads (Medium and Coarse Fits)
CNS 173-1983 Key Section and Tolerance (Cold Drawing)
CNS 531-1978 Iso Metric Screw Threads-Tolerances-Deviations for Constructional Threads
CNS 13081-1992 Predicting Deviations of Assemblies and Allocation of Tolerances for Building

Professional Standard - Textile, Offset Calibration Offset

FZ/T 90009-1991 General tolerance Limit deviation of untolerated dimensions

Indonesia Standards, Offset Calibration Offset

SNI 05-2637-1992 Permissiable deviation without tolerance indication for press working of sheet metal
SNI 05-2639-1992 Permissible deviation without tolerance indication for die casting
SNI 05-1822-1990 Technical drawings - Tolerances of form and of position. Dimensioning and tolerancing of profiles

AT-ON, Offset Calibration Offset

ONORM M 6321 Teil.1-1985 Rolling bearings; tolerances: definitions Roulements; tol?rances: d?finitions
ONORM EN 40 Teil.2-1980 Lighting columns Dimensions and tolerances
ONORM M 1368 Teil.1-1978 Rough steel Castings; dimensional variations
ONORM M 6770-4-2000 Accuracy of cylindrical gears - Total radial composite deviation Fi" and tooth-to-tooth radial composite deviation fi"
ONORM M 6770-5-2000 Accuracy of cylindrical gears - Total tangential composite deviation Fi' and tooth-to-tooth tangential composite deviation fi'
ONORM M 6770-3-2000 Accuracy of cylindrical gears - Runout Fr
ONORM ISO 965 Teil.3:1983 ISO generalpurpose metric screw threads; Tolerances; Deviations for con- structional threads
ONORM ISO 286 Teil.1:1990 ISO System oflimits andfits; bases of tolerances, deviations andfits
ONORM M 1369 Teil.1-1978 Rough castlngs of grey iron; dimensional variations
ONORM M 1371 Teil.1-1978 Rough castings of malleable iron; dimensional variations
ONORM M 1370 Teil.1-1978 Rough Castings of cast iron with spheroidal graphite; dimensional variations
ONORM M 6794-2-1997 Pinion-type cutters for cylindrical gears - Tolerances and permissible deviations
ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM M 3286-2001 Steel bars - Forged flat steel bars - Dimensions, permissible deviations
ONORM M 1374 Teil.1-1985 Rough castings oflight metal alloys; dimensional variations
ONORM M 3226-1969 Steel bars; hot rolled square steel.
ONORM M 1373 Teil.1-1985 Rough castings ofheavy metal alloys; dimensional variations
ONORM M 6771-1995 Deviations of centre distance and parallelism tolerances for axes of cases for cylindrical gears
ONORM M 6772-1995 System of gear fits - Backlash, deviations and tolerances of teeth thickness - General bases
ONORM M 6750-1987 Cylindrical worm gear pairs with shaft angle 90°; definitions, determining dimensions, deviations and tolerances
ONORM EN 20286-1-1993 ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fits (ISO 286-1:1988)

SE-SIS, Offset Calibration Offset

SIS SMS 2170-1966 Metric screw threads. Tolerances. Deviations for constructional threads
SIS SMS 2170-1973 Metric screw threads. Tolerances. Deviations for constructional threads.
SIS 16 19 52-1964 Plastics. Dimensional variation of mouldings
SIS SMS 715-1968 Tolerances for dimensions without tolerance markings
SIS SS 504-1990 ISO system of limits and fits — Fundamental deviations for shafts — Graphical review
SIS SS 503-1990 ISO system of limits and fits — Fundamental deviations for holes — Graphical review
SIS 02 11 18-1974 Insulation materials. Determination of squareness deviation
SIS 02 11 19-1974 insulation materials. Determination of straightness deviation
SIS 02 11 13-1974 Concrete units. Determination of bearing deviations
SIS SS-ISO 965/3:1984 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads

IN-BIS, Offset Calibration Offset

IS 4897-1994 Deviations on untoleranced dimensions and mass of steel castings
IS 8349-1977 Untolerance dimensional deviations of malleable iron castings
IS 5519-1979 Deviations from dimensional and quality tolerances of gray iron castings
IS 8350-1977 Untolerance dimensional deviation of ductile iron castings or ductile iron castings

AR-IRAM, Offset Calibration Offset

IRAM 5002-1965 Basic tolerance and deviation size 500mm is sufficient

AGMA - American Gear Manufacturers Association, Offset Calibration Offset

ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information
08FTM19-2008 How Are You Dealing with the Bias Error in Your Helical Gears?

PL-PKN, Offset Calibration Offset

PN H83104-1972 Groy iron castings Dimensional tolerances, machining allowan- ces and weight deviaiions
PN-EN 336-2013-12 P Structural timber -- Sizes, permitted deviations
PN-EN 336-2013-12/Ap1-2021-03 E Structural timber -- Sizes, permitted deviations
PN H83154-1972 Steel castings Dimensional ?olerances. Machining allowan- ces and wieght deviations
PN O79716-1991 Glass bottles. Vertical axis deviation. Test method
PN H83207-1974 Non-ferrons metal castings Dimensional tolerances machining allowan- ces and weight deviations
PN C89025-1990 Plastics Determination of temperatur? of deflection by Martens method
PN S83200-1968 Threads for valves of air tubes Dimensions and limiting deviations

Professional Standard - Pharmaceutical Packaging, Offset Calibration Offset

YBB 0019-2003 Chuizhizhoupiancha Cedingfa Tests for vertical axis deviation of bottles
YBB 0019(03)-2003 Vertical axis deviation measurement method (trial)

RU-GOST R, Offset Calibration Offset

GOST R 53465-2009 Equipment foundry. Foundry biases
GOST 25348-1982 Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm
GOST 26877-1991 Metal products. Methods of measuring from variatons
GOST 6449.5-1982 Products of wood and wooden materials. Non-specified limiting deviations and tolerances
GOST 26877-2008 Metal products. Methods of measuring form variations
GOST 9664-1974 Resistors. Tolerances on rated resistance
GOST 10683-1973 Electric machines. Rated speeds of rotation and tolerances
GOST 25346-1989 Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

Professional Standard-Ships, Offset Calibration Offset

CBM 1003-1981 Flange size tolerance

BE-NBN, Offset Calibration Offset

NBN 105-1948 Axis limit gauge deviation
NBN 106-1948 Limit gauge deviation for boring
NBN-ISO 4464:1992 Tolerances for building - Relationship between the different types of deviations and tolerances used for specification
NBN 138-1967 Tolerances and adjustments, nominal dimensions > 500mm bore and usual deviations of shafts
NBN 102-1962 ISO tolerance system. Conventional deviation of nominal dimensions less than or equal to 500mm
NBN 219-04-1970 Sawed into lumber, fat-containing wood. Deviations and retractions
NBN 139-1967 Tolerances and adjustments, inspection of nominal dimensions > 500mm, usual deviations of bore and shaft

国家市场监督管理总局、中国国家标准化管理委员会, Offset Calibration Offset

GB/T 15055-2021 Permissible stamping variations in dimensions without tolerance indication

American Society for Testing and Materials (ASTM), Offset Calibration Offset

ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM D2906-97 Standard Practice for Statements on Precision and Bias for Textiles
ASTM D2906-97(2002) Standard Practice for Statements on Precision and Bias for Textiles
ASTM C1426-14(2020) Standard Practices for Verification and Calibration of Polarimeters
ASTM D3134-97(2003) Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97(2008)e1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-15 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D6518-02 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-03 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-02a Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D6518-06e1 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-06 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias

Association Francaise de Normalisation, Offset Calibration Offset

NF X08-014:1983 COLOUR. COLOUR DIFFERENCES AND TOLERANCES. COLOUR DIFFERENCE FORMULA CIE LUV AND CIE LAB.
NF P21-352:1995 Glued laminated timber. Sizes. Permissible deviations.
NF E75-215*NF ISO 13942:2019 Bonded abrasive products - Limit deviations and run-out tolerances
NF ISO 13942:2019 Produits abrasifs agglomérés - Écarts limites et tolérances de battement
NF EN 336:2013 Bois de structure - Dimensions, écarts admissibles
NF E75-215:2001 Bonded abrasive products - Limit deviations and run-out tolerances.
NF P21-351*NF EN 336:2013 Structural timber - Sizes, permitted deviations
NF E10-103:1988 Dimensional measuring. Part 4 : circularity deviation.
NF E02-100-1:1993 Iso system of limits and fits. Part 1 : bases of tolerances, deviations and fits.
NF E10-101:1988 Dimensional measuring. Part 2 : staightness deviation.
NF E10-102:1988 Dimensional measuring. Part 3 : flatness deviation.
NF E10-107:1993 Dimensional measuring. Part 8 : perpendicularity deviation.
NF EN ISO 6284:1999 Dessins de génie civil - Indication des écarts limites.
NF EN 10278:1999 Dimensions et tolérances des produits en acier transformé à froid

International Electrotechnical Commission (IEC), Offset Calibration Offset

IEC PAS 62336:2002 Accelerated moisture resistance - Unbiased HAST

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Offset Calibration Offset

JEDEC JESD22-A108C-2005 Temperature, Bias, and Operating Life
JEDEC JESD22-A102-C-2000 Accelerated Moisture Resistance - Unbiased Autoclave
JEDEC JESD22-A101-B-1997 Steady-State Temperature Humidity Bias Life Test
JEDEC JESD22-A102D-2010 Accelerated Moisture Resistance - Unbiased Autoclave
JEDEC JESD22-A102E-2015 Accelerated Moisture Resistance - Unbiased Autoclave

Aerospace Industries Association/ANSI Aerospace Standards, Offset Calibration Offset

AIA/NAS NAS 445-1951 Nut - Offset Anchor Type (Rev. 2)
AIA/NAS NAS 2803-2810-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi Rev. 6
AIA/NAS NAS 2803-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2804-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2805-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2806-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2807-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2808-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2809-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 2810-1994 Bolt, 100 Degree Head, Offset Cruciform, Close Tolerance, 180,000 psi (Rev. 6)
AIA/NAS NAS 1181-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1181-1188-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1182-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1183-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1184-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1185-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1186-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1187-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1188-1996 Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform Rev. 9
AIA/NAS NAS 1131-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1131-1138-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform Rev.11
AIA/NAS NAS 1132-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1133-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1134-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1135-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1136-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1137-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1138-1991 Screw, Machine-Pan Head Close Tol, Short Thd, Offset Cruciform (Rev. 11)
AIA/NAS NAS 1151-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1151-1158-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1152-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1153-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1154-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1155-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1156-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1157-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1158-1996 Screw, Machine-Flat 100 Deg Head, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
AIA/NAS NAS 1141-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1141-1148-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1142-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1143-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1144-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1145-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1146-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1147-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
AIA/NAS NAS 1148-1996 Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9

British Standards Institution (BSI), Offset Calibration Offset

BS ISO 13942:2003 Bonded abrasive products - Limit deviations and run-out tolerances
BS ISO 965-3:2021 ISO general purpose metric screw threads. Tolerances. Limit deviations for screw threads
BS ISO 13942:2019 Bonded abrasive products. Limit deviations and run-out tolerances
BS EN 390:1995 Glued laminated timber - Sizes - Permissible deviations
BS EN 336:2013 Structural timber. Sizes, permitted deviations
BS EN 336:2003 Structural timber. Sizes, permitted deviations
BS EN ISO 6284:1999 Construction drawings - Indication of limit deviations
22/30435210 DC BS ISO 6284. Construction drawings. Indication of limit deviations
BS ISO 965-3:1998 ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads
BS ISO 965-3:1999 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads

Japanese Industrial Standards Committee (JISC), Offset Calibration Offset

JIS R 6244:2022 Bonded abrasive products -- Limit deviations and run-out tolerances
JIS R 6244:2005 Bonded abrasive products -- Limit deviations and run-out tolerances
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 1707:2018 Bevel gears -- Definitions and tolerance classification of tooth flank form deviations
JIS B 0401-1:1998 ISO system of limits and fits -- Part 1: Bases of tolerances, deviations and fits
JIS R 6244 AMD 1:2013 Bonded abrasive products -- Limit deviations and run-out tolerances (Amendment 1)
JIS M 8709:2006 Iron ores -- Experimental methods for checking the bias of sampling

European Committee for Standardization (CEN), Offset Calibration Offset

EN 390:1994 Glued Laminated Timber - Sizes - Permissible Deviations
EN 336:2003 Structural timber - Sizes, permitted deviations
EN 336:2013 Structural timber - Sizes, permitted deviations
PD CEN/TS 16641:2014 Textile floor coverings - Guidelines for acceptable colour deviations

API - American Petroleum Institute, Offset Calibration Offset

API PUBL 4367-1983 Groundwater Monitoring and Sample Bias

Lithuanian Standards Office , Offset Calibration Offset

LST EN 336-2004 Structural timber - Sizes, permitted deviations
LST EN 390-2000 Glued laminated timber - Sizes - Permissible deviations
LST EN ISO 6284:2001 Construction drawings - Indication of limit deviations (ISO 6284:1996)

AENOR, Offset Calibration Offset

UNE-EN 336:2014 Structural timber - Sizes, permitted deviations
UNE 17709:2002 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
UNE-EN ISO 6284:2000 CONSTRUCTION DRAWINGS. INDICATION OF LIMIT DEVIATIONS (ISO 6284:1996)

VE-FONDONORMA, Offset Calibration Offset

NORVEN 55-18-1961 Spindle deviation in twisting ring

Professional Standard - Machinery, Offset Calibration Offset

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations
JB/T 4381-1999 Permissible limit deviation in dimensions without tolerance indication for shearing of metal plates
JB/T 4381-2011 Permissible limit deviation in dimensions without tolerance indication for shearing of metal plate
JB/T 1623-1992 Boiler tube hole center distance dimension deviation
JB/T 10045.3-1999 Thermal cutting.Quality and demensional deviation in the gas cutting

RO-ASRO, Offset Calibration Offset

STAS 2171/2-1984 STEEL DROP FORGINGS Machining allowances and tolerances for hammcr forgings
STAS 2171/1-1984 STEEL DROP FORGINGS Machining allowanccs and tolerances for hydraulic press forgings
STAS 53-1952 Tolerances and calibration. Tolerance and calibration terminology
STAS 7385/1-1985 Technical drawings GEOMETRICAI. TOLERANCES Tolerances of form, orientation, location and run-out
STAS SR ISO 3086:1995 Iron ores. Experimental methods for checking the bias sampting
STAS SR ISO 3607:1995 Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses
STAS 930-1975 ELECTRIC SYSTEMS Rated voltages and permissible deviations
STAS SR ISO 2692:1996 Technical drawings. Geometrical tolerancing. Maximum material principie
STAS SR ISO 3609:1996 Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses

Professional Standard - Light Industry, Offset Calibration Offset

QB/T 1512-2011 Sewing machine parts.Size limit of not note tolerances
QB/T 1512-1992 Limit Deviation of Sewing Machine Parts without Tolerance Dimensions

Professional Standard - Military and Civilian Products, Offset Calibration Offset

WJ 1707-1987 Limit Deviation of Non-Tolerance Angle of Cold Stamping Parts

IL-SII, Offset Calibration Offset

S.I.622.2-1966 ISO SYSTEM OF LIMITS AND FITS, PART 2: TOLERANCES AND DEVIATIONS

Professional Standard - Railway, Offset Calibration Offset

TB 347-1985 Limit deviation of communication signal products without tolerance dimensions
TB/T 2250-1991 Limit Deviations of Non-Tolerance Dimensions for Welded Structures of Rolling Stock

Standard Association of Australia （SAA）, Offset Calibration Offset

AS 1654.1:1995 ISO system of limits and fits - Bases of tolerances, deviations and fits
AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

Professional Standard - Automobile, Offset Calibration Offset

QC/T 269-1999 Limit Deviation of Dimensions Without Tolerance Note for Automobile Casting Parts
QC/T 269-2023 Permissible automobile casting variations in dimensions without tolerance indication
QC/T 266-1999 General requirements for limit deviations of untolerated dimensions of auto parts
QCn 29017-1991 Limit deviations of untolerated dimensions for automotive molded plastic parts
QC/T 29087-1992 The Limit Deviation of the Non-Tolerance Dimensions of Automobile Welding Processed Parts
QC/T 29017-1991 Limit deviations of untolerated dimensions for automotive molded plastic parts
QC/T 267-1999 Limit Deviation of Automobile Cutting Parts without Tolerance Dimensions
QC/T 270-1999 Limit Deviation of Dimensions Without Tolerance Note for Automobile Steel Die Forging Parts
QC/T 267-2023 Permissible cutting parts variations in dimensions without tolerance indication
QC/T 29017-2023 Permissible automotive molded plastic parts variations in dimensions without tolerance indication
QC/T 29087-2023 Permissible welding variation in dimensions without tolerance indication
QC/T 268-1999 Limit Deviation of Dimensions without Tolerance Note for Automobile Cold Stamping Processed Parts
QC/T 268-2023 Permissible automobile cold stamping variations in dimensions without tolerance indication

National Metrological Technical Specifications of the People's Republic of China, Offset Calibration Offset

JJF 1497-2014 Calibration Specification for Polarimeters
JJF 1932-2021 Calibration Specification for Ellipsometers

VN-TCVN, Offset Calibration Offset

TCVN 6283-4-1999 Hot-rolled steel bars.Part 4.Tolerance
TCVN 2244-1999 ISO system of limits and lits.Bases of tolerances,deviations and fits
TCVN 4794-1989 Permitted deviations in mesuring lengths up to 500 mm when tolerances are not indicated
TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts
TCVN 6805-2001 Aluminium ores.Experimental methods for checking the bias of sampling

American National Standards Institute （ANSI), Offset Calibration Offset

ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement

CEN - European Committee for Standardization, Offset Calibration Offset

EN 336:1995 Structural Timber - Coniferous and Popular - Sizes@ Permissible Deviations

National Metrological Verification Regulations of the People's Republic of China, Offset Calibration Offset

JJG(电子) 05042-1991 Verification Regulations for CD-22 Deviation Bridge
JJG 988-2004 Vertical Metal Tank Diametrical Deviation Measuring Instrument

HU-MSZT, Offset Calibration Offset

MSZ 23017-1984 Examples of shape and position deviations

TR-TSE, Offset Calibration Offset

TS 1845-1975 ISO SYSTEM OF LIMTTS AND FTTS PART 1 : GENERAL, TOLERANCES AND DEVIATTONS

PT-IPQ, Offset Calibration Offset

NP 305-1962 Carreaux de faieiru?, carreaux de gTès cérame et carreaux de ciment. Détermination de la dispersion des dimensiona
NP 1368-1976 brass. Bolt extrusion wheel. Dimensions and deviations
NP 4122-1991 Sewing machines Needles. Fítting dimensions. Tolerances and combínations

Group Standards of the People's Republic of China, Offset Calibration Offset

T/CPSS 1002-2019 Low voltage active voltage deviation compensator

GM North America, Offset Calibration Offset

GM GML136-1988 Straight Screw Thread Eccentricity Tolerances for Tube Fittings

Association of German Mechanical Engineers, Offset Calibration Offset

VDI/VDE 2631 Blatt 1-1999 Form measurement - Principles for the measurement of geometrical deviations
VDI/VDE 2631 Blatt 5-2004 Form measurement - Determination of the axial spindle deviation
VDI/VDE 2631 Blatt 4-2014 Form measurement - Determination of the radial spindle deviation

FI-SFS, Offset Calibration Offset

SFS 3996-1977 Gears, bevel gears, deviations and measurement methods
SFS 2021-1967 Hot rolled steel strip dimensions and permissible deviations

NL-NEN, Offset Calibration Offset

NEN 2890-1990 Derivation of target sizes from modular sizes of building elements
NEN 2431-1967 Bright key steel. Dimensions, toierances, weights
NEN 2889-1990 Concrete components - Maximum permissible dimensional deviations

U.S. Military Regulations and Norms, Offset Calibration Offset

ARMY MIL-C-48471 B (2)-1998 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B NOTICE 4-1997 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B REINST NOTICE 3-1996 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B VALID NOTICE 1-1987 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B-1981 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE

American Gear Manufacturers Association, Offset Calibration Offset

AGMA 08FTM19-2008 How Are You Dealing with the Bias Error in Your Helical Gears?

NO-SN, Offset Calibration Offset

NS 3444-1985 Joints in building - Accommodation of dimensional deviations

Professional Standard - Aviation, Offset Calibration Offset

HB/Z 259-1994 Bottom hole diameter and deviation of interference thread process
HB 20081-2012 Test method for optical angular deviation of transparent parts
HB 20081-2012/0490 Test method for optical angular deviation of transparent parts

VDI - Verein Deutscher Ingenieure, Offset Calibration Offset

VDI/VDE 2631 BLATT 5-2014 Formpruefung - Ermittlung der axialen Drehfuehrungsabweichung
VDI/VDE 2631 Blatt 4-2013 Formpruefung - Ermittlung der radialen Drehfuehrungsabweichung

BR-ABNT, Offset Calibration Offset

ABNT P-NB-112 Brazilian regulations, for allowable deviations in a manner that does not specify tolerances,